Crossed-beam studies of ion-molecule reaction mechanisms.
Crossed beam studies of ion-molecule reaction mechanisms, crossing approximately monoenergetic ion beam with thermal molecular beam
Herman, Z.↗
SEARCH · Search NASA
Results for “MOLECULAR BEAM”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Interactions of satellite-speed helium atoms with satellite surfaces. 2: Energy distributions of reflected helium atoms
Energy transfer in collisions of satellite-speed (7,000 m/sec) helium atoms with a cleaned 6061-T6 satellite-type aluminum surface was investigated using the molecular-beam technique. The amount of energy transferred was determined from the measured energy of the molecular-beam and the measured spatial and energy distributions of the reflected atoms. Spatial distributions of helium atoms scattered from a 6061-T6 aluminum surface were measured. The scattering pattern exhibits a prominent backscattering, probably due to the gross surface roughness and/or the relative lattice softness of the aluminum surface. Energy distributions of reflected helium atoms from the same surface were measured for six different incidence angles. For each incidence angle, distributions were measured at approximately sixty scattering positions. At a given scattering position, the energy spectra of the reflected helium atoms and the background gas were obtained using the retarding-field energy analyzer.
Liu, S. M.↗
Measurement of surface stay times for physical adsorption of gases
A molecular beam time-of-flight technique is studied as a means of determining surface stay times for physical adsorption. The experimental approach consists of pulsing a molecular beam, allowing the pulse to strike an adsorbing surface and detecting the molecular pulse after it has subsequently desorbed. The technique is also found to be useful for general studies of adsorption under nonequilibrium conditions including the study of adsorbate-adsorbate interactions. The shape of the detected pulse is analyzed in detail for a first-order desorption process. For mean stay times, tau, less than the mean molecular transit times involved, the peak of the detected pulse is delayed by an amount approximately equal to tau. For tau much greater than these transit times, the detected pulse should decay as exp(-t/tau). However, for stay times of the order of the transit times, both the molecular speed distributions and the incident pulse duration time must be taken into account.
Wilmoth, R. G.↗
Observation of the reactive asymmetry of methyl iodide - Crossed beam study of the reaction of rubidium with oriented methyl iodide molecules.
Crossed molecular beam kinetics of reactive asymmetry of oriented methyl iodide polar molecules reacting with rubidium
METHYL HALIDE↗
PROCEEDINGS OF THE SECOND INTERNATIONAL SYMPOSIUM ON RAREFIED GAS DYNAMICS
Rarefied gas dynamics - molecular beams and surface interactions, free-molecular flow, fluid mechanics, kinetic theory
MOLECULAR FLOW↗
Ballistic electron emission microscopy and spectroscopy of Au/GaAs interfaces
This paper presents the first Schottky barrier results for the Au/GaAs(100) interface prepared completely in situ on GaAs grown by molecular-beam epitaxy. The resulting interface displays unexpected properties which can be interpreted in terms of enhanced electrode interdiffusion. In addition, the capability of molecular-beam epitaxy for in situ processing enables the stabilization of this interface against diffusion and allows the formation of a Au/GaAs system with nearly ideal properties. Newly developed ballistic electron spectroscopy and imaging techniques demonstrate that the heterogeneity present at the interface of Au/GaAs(100) fabricated on chemically treated GaAs substrates is removed.
Kaiser, W. J.↗
Growth and characterization of CdTe on GaAs/Si substrates
Epitaxial CdTe has been grown on both (100) GaAs/Si and (111) GaAs/Si substrates. A combination of molecular beam epitaxy and metal organic chemical vapor deposition have been employed to achieve this growth. The GaAs layers are grown in Si substrates by molecular beam epitaxy, followed by the growth of CdTe on GaAs/Si substra by metalorganic chemical vapor deposition. X-ray diffraction, photoluminescence, and scanning electron microscopy have been used to characterize the CdTe films.
Radhakrishnan, G.↗
A facility for the simulation of low orbit atmospheric oxygen bombardment
A molecular beam facility to simulate the space environment of a spacecraft at low orbit was designed with the intent of studying the effect on the properties of optical elements of oxygen atoms impacting at orbital velocity. The four-stage differentially pumped molecular beam facility includes a variety of oxygen atom beam sources which cover a wide range of velocities (1 km/sec to approximately 8 km/sec), in addition to the ultra-clean experimental environmental of an ultra-high vacuum chamber and an optical diagnostic set-up. The primary oxygen atom beam source used to obtain the 8 km/sec O atoms is an arc heated source. It consists of a modified commercially available plasma torch. The modifications include attachments which provide for a nozzle which is used to expand the atomic beam into the vacuum system, and exhaust channels to dispose of excess torch gas. The torch operates in the 'nontransferred' mode of operation, that is the electric arc is confined within the torch. A plasma is formed in helium by a dc arc. A small amount of O2 is injected downstream from the arc where it is thermally dissociated by the hot He into oxygen atoms. The high temperature and isentropic expansion give the oxygen atoms their velocity. Using seeded beam techniques, oxygen atom beams of approximately 3.5 and approximately 1.5 km/sec, respectively, are obtained.
Arnold, G. S.↗
Exploiting the Vacuum of Space
Molecular-beam epitaxy and other processes tested with minimal contamination. Vacuum experimental facility for outer space creates vacuums higher than those available in terrestrial vacuum chambers. Facility minimizes contamination of work from walls and allows rapid removal of gases and heat generated by experimental processes. Used for processes such as molecular-beam epitaxy (growing semiconductor superlattices), metal/organic chemical vapor deposition, coating mirrors and other optical components, and ultrapurification.
Naumann, R. J.↗
Vacuum MOCVD fabrication of high efficience cells
Vacuum metal-organic-chemical-vapor-deposition (MOCVD) is a new fabrication process with improved safety and easier scalability due to its metal rather than glass construction and its uniform multiport gas injection system. It uses source materials more efficiently than other methods because the vacuum molecular flow conditions allow the high sticking coefficient reactants to reach the substrates as undeflected molecular beams and the hot chamber walls cause the low sticking coefficient reactants to bounce off the walls and interact with the substrates many times. This high source utilization reduces the materials costs power device and substantially decreases the amounts of toxic materials that must be handled as process effluents. The molecular beams allow precise growth control. With improved source purifications, vacuum MOCVD has provided p GaAs layers with 10-micron minority carrier diffusion lengths and GaAs and GaAsSb solar cells with 20% AMO efficiencies at 59X and 99X sunlight concentration ratios. Mechanical stacking has been identified as the quickest, most direct and logical path to stacked multiple-junction solar cells that perform better than the best single-junction devices. The mechanical stack is configured for immediate use in solar arrays and allows interconnections that improve the system end-of-life performance in space.
Partain, L. D.↗
Rarefied gas dynamic effects on mass spectrometric studies of upper planetary atmospheres
Results are presented of measurements obtained with an open-source mass spectrometer both in earth orbit and in a laboratory molecular beam facility. The mass spectrometer/ion source combination was developed in the laboratory to be operable in either of two modes by altering ion extraction potential on ground command, i.e., as a stagnation cavity or to respond only to the incoming molecules of the unperturbed atmosphere. Results indicate that the use of this open-source configuration and dual-mode capability, allied with both standard static calibration and dynamic calibration using high-speed molecular beam techniques in the laboratory, allows collection of useful data on aeronomy of the upper atmosphere of planets and comet tails.
French, J. B.↗
Development of an Effective Finite-rate Oxidation Model for NuSil-coated Charred Carbon Preform Ablators
Recently, a detailed effective finite-rate surface chemistry model was developed for the oxidation of FiberForm [1] using the molecular beam experimental data of Poovathingal et al., [2]. FiberForm is the major building block of the thermal protection system (TPS) material Phenolic Impregnated Carbon Ablator (PICA), commonly used by NASA. The surface chemistry model consists of detailed surface reaction mechanisms such as adsorption, desorption, and several types of Langmuir-Hinshelwood (LH) reactions to characterize the oxygen-carbon interactions at the surface. This model provides excellent agreement with the experimental data for oxidation product compositions and corresponding translational energy distributions. Further, an effective oxidation model was constructed that captures the equivalent interaction of oxygen inside the microstructure (including multiple surface collisions) via a modified reactivity for a smooth wall boundary condition. This enables the use of this model directly into Computational Fluid Dynamics (CFD) codes and Material Response (MR) codes to accurately simulate the gas–surface interactions within FiberForm without using the detailed micro-structure. However, this effective model is valid only for the virgin FiberForm. As the TPS material undergoes ablation, the preform carbon burns and turns into char. In addition, PICA is also coated with a protective silicon coating called NuSil for the purpose of mitigating the spread of phenolic dust, and limit contamination during clean room operations. Fig. 1 shows a X-ray microtomography image of a charred NuSil-coated PICA. The NuSil layer introduces species containing silicon into the product mixture. Further, the reactivity of the carbon within the char layer is different from the virgin FiberForm as shown in Fig. 2. Recently a new set of molecular beam experiments were performed on this NuSil-coated TPS material [3] with the same type of oxygen beam used in the previous experiments. Using the latest experimental data, the previously developed effective model will be extended to account for the charred carbon as well as the NuSil coating. Finally, this new effective model with three phases – preform carbon, char, and NuSil; will be compared and validated against the experimental product compositions.
K Swaminathan Gopalan↗
Kinetic theory of optical maser
Kinetic theory of interactions between coherent light waves and polarized molecular beams at near free molecular flow regions
Chiu, H. H.↗
Identification of the SiCC radical toward IC +10216 - The first molecular ring in an astronomical source
In the radio spectrum of the envelope of the evolved carbon star IRC +10216, the fraction of lines from exotic molecules seldom or never observed in the terrestrial laboratory is exceptionally high. At least 20 lines have not been identified, and it is not known whether one, two, or a number of new molecules are involved. It is shown in the present investigation that nine of the previously unidentified lines in IRC +10216 are produced by SiCC, a radical long known to exist in stellar atmospheres. The true ground-state geometry of this radical has only been obtained recently on the basis of an elegant two-photon ionization experiment in a supersonic molecular beam. Information regarding the molecular geometry and lower rotational levels of SiCC is presented in a graph. The intensities of the SiCC lines confirm the assignments, yield new data on the temperature and density in the envelope of IRC +10216, and indicate that the amount of SiCC there is substantial.
Thaddeus, P.↗
Properties of coated and modified surfaces
The ability to create surface and near-surface properties distinct from the bulk properties of a material by means of coating or surface modification techniques is an important new field of development for engineering materials, encompassing ion implantation, plasma processing, reactive deposition methods, ion beam deposition and modification, molecular beam epitaxy, and fast quench thermal processing. Attention is given to specific areas of process control which illustrate (1) the use of process development to control material properties, (2) the importance of surface modification and coating to the tribology and ion-surface interactions of semiconductor film growth, and (3) recent findings in surface science which exemplify potential applications of ion-surface interactions that generate novel material qualities.
Mattox, D. M.↗
Ultra-sensitive high-precision spectroscopy of a fast molecular ion beam
Explore the source record for details and available documents.
Andrew A. Mills↗
Chemical and Flowfield Modeling for Enhanced Analysis of Contamination Experiments
This paper describes the application of a new Direct Simulation Monte Carlo (DSMC) code, the Molecular Beam Simulator (MBS), which is designed to analyze laboratory scale molecular beam-surface (and crossed-beam) experiments. The MBS is primarily intended to model experiments associated with spacecraft contamination effects, but it can also be used to simulate a variety of surface chemistry and reactive flow measurements. The MBS code is fully three-dimensional, includes a wide-range of chemical processes, and can model one or multiple pulsed (non-steady) sources. As an example application of the MBS code, a fast, pulsed, oxygen atom-surface experiment which examines the chemistry behind erosion of graphite by oxygen atoms is analyzed. Unsteady DSMC simulations show that experimental observations of excited molecular states after the pulse has hit the surface are consistent with two distinct chemical mechanisms: a direct one where the excited molecules are formed on the surface, and a two-step mechanism where ground state molecules formed on the surface are collisionally excited after they leave the surface by trailing oxygen atoms in the pulse. Further DSMC calculations suggest experiments which can distinguish between these mechanisms.
Braunstein, Matthew↗
Annual Progress Report, 1966
Rarefied gas mechanics, plasma dynamics, blast wave phenomena, energy conversion, aerodynamic noise, subsonics, flight dynamics, materials, high altitude measurements, and molecular beams
PLASMA DYNAMICS↗