Search NASA⌕ Search

SEARCH · Search NASA

Results for “Organometallic”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Crystal structure of [Th 3 (Cp*) 3 (O)(OH) 3 ] 2 Cl 2 (N 3 ) 6 : a discrete molecular capsule built from multinuclear organothorium cluster cations

An unusually large and structurally complex charge-neutral polynuclear cluster, hexa-μ 2 -azido-di-μ 3 -chlorido-hexa-μ 2 -hydroxido-di-μ 3 -oxido-hexakis(pentamethylcyclopentadienyl)hexathorium–diethyl ether–tetrahydrofuran (1/0.56/1.44), [Th 3 (C 10 H 15 ) 6 Cl 3 (N 3 ) 6 (OH) 6 O 2 ]·0.56C 4 H 10 O·1.44C 4 H 8 O or [Th 3 (Cp*) 3 (O)(OH) 3 ] 2 Cl 2 (N 3 ) 6 ·0.56C 4 H 10 O·1.44C 4 H 8 O (Cp* = [pentamethylcyclopentadienyl]) − , has been crystallized as a mixed tetrahydrofuran/diethyl ether solvate and structurally characterized. The molecule contains a number of unusual features, the most notable being a finite yet exceptionally long cyclic metal-azido chain. These rare features are the consequence of both sterically protecting Cp* ligands and highly bridging oxide and hydroxide ligands in the same system and illustrate the interesting new possibilities that can arise from combining organometallic and solvothermal f -block element chemistry.

Kelley, Steven P.↗
DOE OSTI2021

Planarization of Rough (100) GaAs Substrates via Growth by Hydride Vapor Phase Epitaxy

Wafer reuse techniques help offset the cost of III-V growth substrates by using a single wafer for multiple growths, but costly re-polishing after device removal limits the end benefit. In this work, we present planarization growth by hydride vapor-phase epitaxy (HVPE), a potentially low-cost growth technique, as a method of smoothing rough substrates for subsequent high-quality device growth without the need for polishing. First, we show there is a threshold for allowable substrate roughness without device degradation by comparing devices grown by organometallic vapor-phase epitaxy (OMVPE) on epi-ready polished and pre-polished substrates that did not have the final epi-ready polish. We then demonstrate successful smoothing with HVPE growth on substrates with different surface morphologies, with features ranging from general roughness to large facets. Initial devices grown by HVPE on a pre-polished substate showed no degradation compared to a control wafer, indicating that planarizing rough substrates through HVPE growth is a promising path toward being able to use rough substrates directly for growth, without costly polishing steps.

GaAs↗
DOE OSTI2021

Improving GaAsP/Si Tandem Solar Cells Using Silicon Passivated Contacts

The degradation of photocarrier bulk lifetime in Si wafer substrates during the heteroepitaxial growth of III-V materials has been widely reported and is known to limit the efficiency of III-V/Si tandem solar cells. There have been prior strategies to protect Si lifetime in III-V growth chambers, but most require the use of a protective layer that must be removed in subsequent device processing. It would be advantageous for protective layers to remain an active part of the device. In this work, we demonstrate that a polycrystalline silicon (poly-Si) passivated contact can protect the minority carrier lifetime of the Si base wafer during the organometallic vapor phase epitaxy of III-V materials on silicon substrates.

Exascale Computing Project↗
DOE OSTI2021

Control of CuPt Ordering in GaInP Grown by Hydride Vapor Phase Epitaxy

We investigate the degree of ordering present in GaInP layers grown by dynamic hydride vapor phase epitaxy (D-HVPE) as a function of various growth conditions. We assess order parameter from both transmission electron and x-ray diffraction and compare these trends to the order parameter estimated by the photoluminescence-determined band gap in the GaInP layers. The degree of ordering increases with deposition temperature and the ratio of gas-phase group V to group III precursors in the reactor. We also investigate the effect of growth rate, demonstrating the capability of HVPE to suppress order through rapid growth rates. Such ordering dependences are consistent with mechanisms established for ordering observed in GaInP grown by organometallic vapor phase epitaxy (OMVPE), but with weaker ordering than GaInP grown by that method.

growth↗
DOE OSTI2020

Precursor selection in hybrid molecular beam epitaxy of alkaline-earth stannates

One of the challenges of oxide molecular beam epitaxy (MBE) is the synthesis of oxides containing metals with high electronegativity (metals that are hard to oxidize). The use of reactive organometallic precursors can potentially address this issue. To investigate the formation of radicals in MBE, we explored three carefully chosen metal-organic precursors of tin for SnO 2 and BaSnO 3 growth: tetramethyltin (TMT), tetraethyltin (TET), and hexamethylditin (HMDT). All three precursors produced single-crystalline, atomically smooth, and epitaxial SnO 2 (101) films on r-Al 2 O 3 (101¯2) in the presence of oxygen plasma. The study of growth kinetics revealed reaction-limited and flux-limited regimes except for TET, which also exhibited a decrease in the deposition rate with increasing temperature above ~800 °C. Contrary to these similarities, the performance of these precursors was dramatically different for BaSnO 3 growth. TMT and TET were ineffective in supplying adequate tin, whereas HMDT yielded phase-pure, stoichiometric BaSnO 3 films. Significantly, HMDT resulted in phase-pure and stoichiometric BaSnO 3 films even without the use of an oxygen plasma (i.e., with molecular oxygen alone). Furthermore, these results are discussed using the ability of HMDT to form tin radicals and therefore assisting with Sn → Sn 4+ oxidation reaction. Structural and electronic transport properties of films grown using HMDT with and without oxygen plasma are compared. This study provides guideline for the choice of precursors that will enable the synthesis of metal oxides containing hard-to-oxidize metals using reactive radicals in MBE.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Enhanced nucleation mechanism in ruthenium atomic layer deposition: Exploring surface termination and precursor ligand effects with RuCpEt(CO)2

Miniaturization of microelectronic devices necessitates atomic precision in manufacturing techniques, particularly in the deposition of thin films. Atomic layer deposition (ALD) is recognized for its precision in controlling film thickness and composition on intricate three-dimensional structures. This study focuses on the ALD nucleation and growth mechanisms of ruthenium (Ru), a metal that has significant future implications for microelectronics. Despite its advantages, the deposition of a high surface-free energy material like Ru on a low surface-free energy material such as an oxide often faces challenges of large nucleation delays and non-uniform growth. To address these challenges, we explored the effectiveness of organometallic surface pretreatments using trimethylaluminum (TMA) or diethylzinc (DEZ) to enhance Ru film nucleation and growth. Our study employed a less-studied Ru precursor, cyclopentadienylethyl(dicarbonyl)ruthenium [RuCpEt(CO)2], which demonstrated promising results in terms of reduced nucleation delay and increased film continuity. Ru ALD was performed on silicon substrates with native oxide, using RuCpEt(CO)2 and O2 as coreactants. Our findings reveal that surface pretreatment significantly improves nucleation density and film thickness within the initial 60 ALD cycles, achieving up to a 3.2-fold increase in Ru surface coverage compared to nonpretreated substrates. Supported by density functional theory calculations, we propose that the enhanced nucleation observed with RuCpEt(CO)2 compared to previously-studied Ru(Cp)2 is due to two key mechanisms: the facilitated removal of CO ligands during deposition, which enhances the reactivity of the precursor, and a hydrogen-abstraction reaction involving the ethyl ligand of RuCpEt(CO)2 and the metal-alkyl groups on the surface. This study not only advances our understanding of Ru ALD processes but also highlights the significant impact of precursor chemistry and surface treatments in optimizing ALD for advanced microelectronic applications.

Materials Science↗
DOE OSTI2020

Optically addressable molecular spins for quantum information processing

Spin-bearing molecules are promising building blocks for quantum technologies as they can be chemically tuned, assembled into scalable arrays, and readily incorporated into diverse device architectures. In molecular systems, optically addressing ground-state spins would enable a wide range of applications in quantum information science, as has been demonstrated for solid-state defects. However, this important functionality has remained elusive for molecules. Here, we demonstrate such optical addressability in a series of synthesized organometallic, chromium(IV) molecules. These compounds display a ground-state spin that can be initialized and read out using light and coherently manipulated with microwaves. In addition, through atomistic modification of the molecular structure, we vary the spin and optical properties of these compounds, indicating promise for designer quantum systems synthesized from the bottom-up.

99 GENERAL AND MISCELLANEOUS↗
DOE OSTI2019

Molecular-Level Design of Heterogeneous Chiral Catalysts

A recent major focus of catalyst research has been on improving the selectivity or atom efficiency of catalytic processes. Perhaps the most subtle and difficult form of selectivity to control is enantioselectivity, a catalyst’s ability to preferentially yield one enantiomer of a chiral product. Since two enantiomers are identical in all respects except for their mirror reflection symmetry, both are formed in non-chiral environments at exactly equal rates; only by introducing some type of chiral modification to the system can the rate of formation of one enantiomer be favored over the other. This has been successfully achieved for homogeneous-phase, organometallic catalysts, but the empirical development of heterogeneous-phase analogs has proven elusive. The design of such heterogeneous-phase catalysts would obviate the need for inefficient purification steps to remove the heavy-metal catalysts. The goal of the proposed research by the Chiral Catalysis Group is to understand the interactions of prochiral reactants on chirally modified surfaces that lead to the preferential formation of one enantiomer over the other. There are two general concepts for designing heterogeneous-phase enantioselective catalysts. The first adopts the strategy used in homogeneous phase, by adding a chiral modifier to the surface. This approach, while conceptually simple has challenges associated with modifying an extended surface. The second concept, which is unique to extended surfaces, is the idea of creating surfaces that are themselves naturally chiral. A fundamental understanding of the interactions that control enantioselectivity will enable the Chiral Catalysis Group to develop the concepts necessary to design novel, heterogenous catalytic materials. Enantioselectivity is also central to catalytic processes that underpin the pharmaceutical and agrochemical industries. With funding from the Department of Energy, the Chiral Catalysis Group has played a leading role in developing a fundamental understanding of chiral catalysis and of the adsorbate structures, interactions and kinetic effects that control heterogenous-phase enantioselectivity. The proposed research program is organized conceptually around three types of enantiospecific interactions: interactions with naturally chiral surfaces; those with modified surfaces categorized as chirally templated surfaces; and one-to-one interactions of prochiral molecules with chiral surface modifiers. Our specific goals are to: (1) determine the structures of chiral surfaces, prochiral reactants, chiral products and chiral modifiers; (2) understand the enantiospecific interactions that occur between prochiral reactants and chiral products with chirally modified surfaces; (3) develop methods for detection of enantiospecific surface phenomena; and (4) elucidate enantioselective reaction pathways and the interactions that control them. The range of expertise within the Chiral Catalysis Group includes molecular-scale theory, surface science experiments, state-of-the-art spectroscopic, kinetic and atomic-scale imaging capabilities carried out in vacuum and under more-realistic liquid- and gas-phase environments complemented by catalytic measurements. By fully integrating such a breadth of approaches and extensive expertise, the Chiral Catalysis Group will, for the first time, be able to understand, rationally design and then control active sites for optimal enantioselectivity. In addition to having a significant impact on the field of chiral catalysis, the proposed research program will further our general understanding of the molecular-scale origins of catalytic selectivity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Support for the 19th International Conference on Crystal Growth and Epitaxy

This project provided financial support for early career participants who attended the 19th International Conference on Crystal Growth and Epitaxy (ICCGE-19) which was held jointly with the 19th U.S. Biennial Workshop on Organometallic Vapor Phase Epitaxy (OMVPE-19) July 28-August 2, 2019 at the Keystone Conference Center, Keystone, Colorado USA. ICCGE-19/OMVPE-19 consisted of technical sessions for presentation and discussion of recent research and development activities in all aspects of crystal growth, epitaxy, characterization and applications including both general sessions and special topical symposia. Three specialized symposia were also held in conjunction with the meeting: the 4th Symposium on 2D Materials and other Low Dimensional Materials and Devices, the 2nd Symposium on Epitaxy of Complex Oxides, and the 2nd Symposium on Ferroelectric Crystals and Textured Ceramics. There were 639 attendees at the conference from 31 countries, including 50% from the U.S., 20% from Europe, 19% from Japan and 4.5% from China.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Cyclometalation Syntheses of Phosphorescent Complexes

This is a final close-out report for DOE contract DE-SC0010714 at Case Western Reserve University in Cleveland, Ohio, that funded organometallic and photophysical research from 1 May 2013–30 April 2020. Highlights of research results are presented along with lists of graduate and undergraduate students supported and original papers acknowledging DOE BES support.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Photoluminescence in Tagging: A Glowing Review

This literature review explores the options of using photoluminescence for tagging uranium fuel and zirconium cladding in order to easily and quickly associate interdicted material to its facility of origin or pathway after loss of institutional control. Photoluminescence is the spontaneous emission of radiation by a substance when excited by interaction with light. The source of photoluminescence can be from organic, inorganic, and organometallic compounds. Each luminophore, or compound responsible for luminescent properties, has individual strengths and weaknesses, depending on the intended use. Many factors can affect the brightness, lifetime, color, and detectability of luminophores, such as humidity, temperature, oxygen availability, noise from radiation–induced luminescence, and the presence of quenching substances like iron. Application of luminescent compound to the surface of an item can be done using paint, dye, thin film, thick film, or electrochemical coating. Several of the application techniques may have secondary functions such as corrosion resistance and detection, heat resistance, protective properties, and more. When considering cladding, there are various successful studies on the application of luminescent coatings on zirconium. However, significant research will be necessary to explore which luminophore and which application technique would best fit the intended use. In order to proceed with this research, a baseline of the natural luminescence of the intended base material (nuclear fuel or cladding) is necessary. While there may be issues with background noise, quenching from the environment, quenching from the substrate, signal to noise weakness, etc. the multitude of options may make photoluminescent tagging an option. In summary, this review has demonstrated that photoluminescence is a potential option to tag nuclear fuel and cladding, but additional paper–studies, testing, and research is required to understand the compatibility of luminescent tags in nuclear reactor environments, manufacturability, and detectability.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2022

AMPED EFRC: Alliance for Molecular PhotoElectrode Design for Solar Fuels

Inspired by natural photosynthesis, the mission of the AMPED EFRC was to develop the fundamental molecular basis for solar-driven water oxidation and carbon dioxide reduction catalysis with dye-sensitized photoelectrodes. From 2014-2022, the Center advanced the state-of-the-art in molecule-decorated photoanodes for water oxidation and broke new ground in the development of photocathodes for CO 2 reduction. A collaborative approach brought together experts in inorganic synthesis, organometallic catalysis, interfacial materials synthesis, photoelectrochemistry, and time-resolved dynamics to address by Grand Challenges in the 2007 DOE BESAC report. Since 2009, the UNC EFRC has published 314 peer-reviewed journal articles, and 2 book chapters. More specifically there were 146 peer-reviewed publications,1-146 during the 2014-20 funding cycle, with 80% supported solely by the EFRC, and about half resulting from collaborations among multiple PIs. Three major scientific research areas emerged from AMPED that are described below with details of the most impactful advances for solar energy research.

14 SOLAR ENERGY↗
DOE OSTI2022

Developing nanometer scale, atomically precise metallo-catalysts with Molecular Lego

We propose to create atomically precise, highly robust, nanometer scale macromolecules that organize biomimetic metal binding groups in designed three-dimensional pockets to accelerate specific polymerization reactions. These atomically precise catalysts will create atomically precise polymers with improved mechanical and environmental properties from renewable building blocks. We seek to create and study nanometer scale catalysts that mimic metallo-enzymes in their activity and selectivity because these larger catalysts will be able to make more extensive non-covalent contacts with the transition state of the growing polymer. These catalysts will have extended lifetimes because they will better protect the metals and higher activity because additional reactive groups can be brought in close contact with the active site to enhance reactivity. They will be far more tolerant to extremes of temperature and will not denature in non-aqueous solvents because they are held together by multiple, strong, covalent bonds. Our approach to catalysts could be used to develop catalysts to replace noble metal-based catalysts when targeting other reactions, because the geometry of the active site enforced by the Molecular Lego scaffolding will access new reactivity, mimicking how nature uses earth abundant metals for much of its catalysis. We will initially target Lewis acid-based catalysts that assemble aliphatic polyesters with improved stereoselectivity, tacticity and complex alternation of monomers. Aliphatic polyesters have received growing attention as attractive, environmentally benign, and sustainable alternatives to polymers developed from petroleum feedstocks. Aliphatic polyesters are environmentally friendly because they undergo facile hydrolytic degradation to benign products, and they have excellent properties and high biocompatibility. We will assemble these catalysts using unique “Spiroligomers” (aka Molecular Lego) chemistry developed in the Schafmeister group combined with the organometallic chemistry expertise of the Dobereiner group. Polymers are an attractive synthetic target of nanoscale atomically precise catalysts because their resulting structure, stereochemistry and tacticity has profound impact on their properties (crystalline vs amorphous) and provides a readout of the catalytic mechanism. Polymer synthesis also serves as an example of “atomically precise manufacturing” where atomically precise nanoscale catalysts construct polymers with atomic precision at increasing length scales.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2024

Support for U.S. Participants at the 18 th International Congress on Catalysis

The 18 th International Congress on Catalysis (ICC) was held Lyon, France on July 14-19, 2024. It provided a premier technical gathering in surface and organometallic catalysis, industrial homogeneous and heterogeneous catalysis, electrocatalysis, photocatalysis, and catalysis in condensed media. This meeting brough together participants from academia, industry, and national laboratories. The organization that overseed this meeting was the Council of the International Congress on Catalysis. This international committee has over 27 signature countries. The United States is represented in the Council of the International Congress on Catalysis through two permanent representatives. These representatives are elected by the Board of Directors of the North American Catalysis Society (NACS), an organization which coordinates and overseas the activities of 12 largely autonomous clubs within the United States, Canada, and Mexico. The critical importance of catalysis is reflected by the fact that 25-30% of all manufactured goods in the United States involve at least one catalytic step. Because advances in a large number of catalytic processes, which are crucial to U.S. interests, were presented at this meeting, it was important to ensure participation from both the U.S. academic and the industrial sectors.

02 PETROLEUM↗
DOE OSTI2025

5f-Shell Covalency in Actinide Complexes

This talk will focus on the theoretical description & analysis of 5f-shell covalency in actinide complexes, as well as the manifestation of this covalency in spectroscopic parameters such as the pre-edge peak energies and intensities in X-ray absorption near-edge structure (XANES) and related types of spectra, or ligand NMR chemical shifts, according to quantum chemical calculations. We are now able to analyze 5f covalency in the context of the participating atomic orbitals, their energies and interactions in a given molecule, and their overlap. A related issue is the assignment of oxidation states. Examples that will be discussed in the talk are [AnCl6](2-) with An = U, Np, Pu, various organometallic complexes with U and Th, and a recently reported ‘berkelocene’ sandwich complex.

Autschbach, Jochen↗
DOE OSTI2025

Alkali Metal Cation Effects for Rapid C–H Activation by Iron(0) Complexes

C–H oxidative addition is a key reaction in organometallic catalysis, motivating efforts to accelerate it. Here, we examine an anionic beta-diketiminate-supported iron(0) species that was previously observed to activate C-H bonds with Na(15-crown-5), but not with K(18-crown-6) or Rb(18-crown-6). Though crown ethers are usually seen as beneficial due to their ability to solubilize alkali metal cations, we observe that removing the crown ether leads to rapid and complete oxidative addition of the C-H bond even by K, Rb, and Cs. The products are iron(II) phenyl hydride complexes that exist as dimers bridged by the alkali metals. Neutron crystallography of the cesium complex verifies the presence and location of the bridging hydrides. It is likely that the crown-free alkali metal cations have greater Lewis acidity that enables them to facilitate oxidative addition of the C-H bond. This system gives insight on how to control the rate and favorability of C-H activation through manipulation of the countercation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Dioxin-Linked Covalent Organic Framework-Supported Palladium Complex for Rapid Room-Temperature Suzuki–Miyaura Coupling Reaction

Covalent organic framework (COF)-supported palladium catalysts have garnered enormous attention for cross-coupling reactions. However, the limited linkage types in COF hosts and their suboptimal catalytic performance have hindered their widespread implementation. Herein, we present the first study immobilizing palladium acetate onto a dioxin-linked COF (Pd/COF-318) through a facile solution impregnation approach. By virtue of its permanent porosity, accessible Pd sites arranged in periodic skeletons, and framework robustness, the resultant Pd/COF-318 exhibits exceptionally high activity and broad substrate scope for the Suzuki–Miyaura coupling reaction between aryl bromides and arylboronic acids at room temperature within an hour, rendering it among the most effective Pd/COF catalysts for Suzuki–Miyaura coupling reactions to date. Moreover, Pd/COF-318 demonstrates excellent recyclability, retaining high activity over five cycles without significant deactivation. The leaching test confirms the heterogeneity of the catalyst. This work uncovers the vast potential of dioxin-linked COFs as catalyst supports for highly active, selective, and durable organometallic catalysis.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Direct Write of 3D Nanoscale Mesh Objects with Platinum Precursor via Focused Helium Ion Beam Induced Deposition

The next generation optical, electronic, biological, and sensing devices as well as platforms will inevitably extend their architecture into the 3rd dimension to enhance functionality. In focused ion beam induced deposition (FIBID), a helium gas field ion source can be used with an organometallic precursor gas to fabricate nanoscale structures in 3D with high-precision and smaller critical dimensions than focused electron beam induced deposition (FEBID), traditional liquid metal source FIBID, or other additive manufacturing technology. In this work, we report the effect of beam current, dwell time, and pixel pitch on the resultant segment and angle growth for nanoscale 3D mesh objects. We note subtle beam heating effects, which impact the segment angle and the feature size. Additionally, we investigate the competition of material deposition and sputtering during the 3D FIBID process, with helium ion microscopy experiments and Monte Carlo simulations. Our results show complex 3D mesh structures measuring ~300 nm in the largest dimension, with individual features as small as 16 nm at full width half maximum (FWHM). These assemblies can be completed in minutes, with the underlying fabrication technology compatible with existing lithographic techniques, suggesting a higher-throughput pathway to integrating FIBID with established nanofabrication techniques.

36 MATERIALS SCIENCE↗