Search NASA⌕ Search

SEARCH · Search NASA

Results for “complex metal oxide”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
NASA NTRS1979

The Moho as a magnetic boundary

Magnetic data are presented for mantle derived rocks: peridtites from St. Pauls rocks, dunite xenoliths from the kaupulehu flow in Hawaii, as well as peridolite, dunite and eclogite xenoliths from Roberts Victor, Dutoitspan, Kilbourne Hole, and San Carlos diatremes. The rocks are paramagnetic or very weakly ferromagnetic at room temperature. Saturation magnetization values range from 0.013 emu/gm to less than 0.001 emu/gm. A review of pertinent literature dealing with analysis of the minerals in mantle xenoliths provides evidence that metals and primary Fe3O4 are absent, and that complex CR, Mg, Al, and Fe spinels dominate the oxide mineralogy. All of the available evidence supports the magnetic results, indicating that the seismic MOHO is a magnetic boundary.

Wasilewski, P. J.↗
DOE OSTI2024

Unraveling the CO Oxidation Mechanism over Highly Dispersed Pt Single Atom on Anatase TiO 2 (101)

Catalysts with noble metals deposited as single atoms on metal oxide supports have recently been studied extensively due to their maximized metal utilization and potential for performing difficult chemical conversions owing to their unique electronic properties. Understanding of the reaction mechanisms on supported single-metal atoms is still limited but is highly important for designing more efficient catalysts. In this study, we report the complexity of the CO oxidation reaction mechanism on Pt single atoms supported on anatase TiO 2 (Pt SA /a-TiO 2 ) by coupling density functional theory (DFT) calculations and microkinetic analysis with kinetic measurements, in situ/operando infrared, and X-ray absorption spectroscopies. Starting from the adsorbed Pt SA occupying an O vacancy induced by reductive pretreatment, we show that CO oxidation follows a complex mechanism consisting of initiation steps to reorganize the active site and multibranch reactive cycles, with the Pt SA /a-TiO 2 catalyst not returning to its initial configuration. The initiation step consists of CO and O 2 adsorption healing the O vacancy, followed by CO oxidation using gas-phase CO to form Pt(CO). The reactive cycle alternates O 2 adsorption and dissociation to oxidize the catalyst to Pt(O)(O)(CO) and branching pathways of competing Langmuir–Hinshelwood (LH)- or Eley–Rideal (ER)-type CO oxidation steps to reduce it again to Pt(CO). In situ/operando infrared experiments, including cryogenic CO adsorption and isotopic CO exchange, confirm the combined involvement of strongly adsorbed CO and gas-phase CO in an Eley–Rideal step along the reaction cycle. Microkinetic modeling shows that Pt single atoms are present in a mixture of Pt(CO), Pt(CO)(O 2 ), Pt(O)(CO)(O 2 ), and Pt(CO)(CO 3 ) structures as the main intermediates during steady-state CO oxidation, all having the C–O vibrational stretch close to the experimentally observed value of 2115 cm –1 . Microkinetic modeling also shows that the fractional orders of CO and O 2 measured experimentally originate from multiple steps with a high degree of rate control and not from a simple competitive adsorption. The results demonstrate the complex reaction pathways that even CO oxidation on a simple single-atom system can follow, providing mechanistic insights for designing efficient Pt-based single-atom catalysts. Here, we further show that microkinetic modeling results are sensitive to changes in energies of intermediate and transition states within errors of density functional theory, which can ultimately lead to incorrect conclusions regarding the reaction pathways and most abundant reaction intermediates if not accounted for by experiments.

36 MATERIALS SCIENCE↗
NASA NTRS2017

TEM Analysis of Diffusion-Bonded Silicon Carbide Ceramics Joined Using Metallic Interlayers

Silicon Carbide (SiC) is a promising material for thermostructural applications due to its excellent high-temperature mechanical properties, oxidation resistance, and thermal stability. However, joining and integration technologies are indispensable for this material in order to fabricate large size and complex shape components with desired functionalities. Although diffusion bonding techniques using metallic interlayers have been commonly utilized to bond various SiC ceramics, detailed microstructural observation by Transmission Electron Microscopy (TEM) of the bonded area has not been carried out due to difficulty in preparing TEM samples. In this study, we tried to prepare TEM samples from joints of diffusion bonded SiC ceramics by Focused Ion Beam (FIB) system and carefully investigated the interfacial microstructure by TEM analysis. The samples used in this study were SiC fiber bonded ceramics (SA-Tyrannohex: SA-THX) diffusion bonded with metallic interlayers such as Ti, TiMo, Mo-B and TiCu. In this presentation, we report the microstructure of diffusion bonded SA-THX mainly with TiCu interlayers obtained by TEM observations, and the influence of metallic interlayers on the joint microstructure and microhardness will be discussed.

Ceramics↗
DOE OSTI2026

Band-mixing effects in one-dimensional charge transfer insulators

The low-energy properties of transition metal oxides (TMOs) are governed by the electrons occupying strongly correlated $d$-orbitals that are hybridized with surrounding ligand oxygen $p$ orbitals to varying degrees. Their physics is thus established by a complex interplay between the transition-metal (TM)-ligand hopping $t$, charge transfer energy $\Delta_\mathrm{CT}$, and on-site TM Hubbard repulsion $U$. Here, we study the spectral properties of a one-dimensional (1D) analog of such a $pd$ system, with alternating TM $d$ and ligand anion $p$ orbitals situated along a chain. Using the density matrix renormalization group method, we study the model's single-particle spectral function, x-ray absorption spectrum, and dynamical spin structure factor as a function of $\Delta_\mathrm{CT}$ and $U$. In particular, we present results spanning from the Mott insulating ($\Delta_\mathrm{CT} > U$) to negative charge transfer regime $\Delta_\mathrm{CT} < 0$ to gain a better understanding of the ground and momentum-resolved excited state properties of these different regimes. Our results can guide new studies on TMOs that seek to situate them within the Mott-Hubbard/charge transfer insulator classification scheme.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
NASA NTRS2016

TEM Analysis of Interfaces in Diffusion-Bonded Silicon Carbide Ceramics Joined Using Metallic Interlayers

Silicon Carbide (SiC) is a promising material for thermo-structural applications due to its excellent high-temperature mechanical properties, oxidation resistance, and thermal stability. However, joining and integration technologies are indispensable for this material in order to fabricate large size and complex shape components with desired functionalities. Although diffusion bonding techniques using metallic interlayers have been commonly utilized to bond various SiC ceramics, detailed microstructural observation by Transmission Electron Microscopy (TEM) of the bonded area has not been carried out due to difficulty in preparing TEM samples. In this study, we tried to prepare TEM samples from joints of diffusion bonded SiC ceramics by Focused Ion Beam (FIB) system and carefully investigated the interfacial microstructure by TEM analysis. The samples used in this study were SiC fiber bonded ceramics (SA-Tyrannohex: SA-THX) diffusion bonded with metallic interlayers such as Ti, TiMo, and Mo-B. In this presentation, the result of microstructural analysis obtained by TEM observations and the influence of metallic interlayers and fiber orientation of SA-THX on the joint microstructure will be discussed.

Silicon Carbide↗
DOE OSTI2026

Ammonia Synthesis by a Supported Iron-Lithium Hydride Precatalyst: Silicon Nitride Support Enabled Synthesis and Nitrogen Reservoir Dynamics

Amorphous silicon nitride (Si 3 N 4 ) is an unconventional support for the chemisorption of organometallic complexes and offers potential improvements in active site stability and reactivity through enhanced metal-nitrogen covalency and orbital overlap in bonding interactions with the nitride framework. Here, we show that silicon nitride-supported iron mesityl complexes display divergent reactivity compared to their silica-supported homologues, resisting metallic particle formation under reducing pretreatment conditions (exposure to excess organolithium reagents) and maintaining active iron/lithium speciation under ammonia synthesis conditions that is absent on the oxide support. When the organometallic iron complex on silicon nitride is exposed to excess n-butyllithium, iron remains isolated, catalyzing the conversion of butyllithium to lithium hydride, resulting in a divalent iron site in a polyhydride environment. In contrast, the silica-supported complex is converted to reduced iron clusters without forming persistent isolated hydrides. These structural differences lead to markedly different catalytic behaviors under ammonia synthesis conditions. The Li/Fe/Si 3 N 4 catalyst is highly active (7.5 mol NH 3 /mol Fe/h at 300 °C, 10 bar, or 46 mol NH 3 /mol Fe/h at 400 °C, 10 bar), while both the silica-supported analog and the nonlithiated Si 3 N 4 -supported species are inactive. Notably, this activity is enhanced relative to previously reported iron-lithium hydride composite catalysts (0.43–4.1 mol NH 3 /mol Fe/h at 300 °C, 10 bar) and relative to the industrial benchmark promoted iron catalyst KM1 (3.0 mol NH 3 /mol Fe/h at 400 °C, 10 bar). The catalyst activation and LiH/LiNH x nitrogen reservoir dynamics for Li/Fe/Si 3 N 4 are studied by X-ray Absorption, Mössbauer, and in situ DRIFT spectroscopies and isotopic exchange kinetics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Trace Impurities Identified as Forensic Signatures in CMX-5 Fuel Pellets Using X-ray Spectroscopic Techniques

We report that small-particle analysis is a highly promising emerging forensic tool for analysis of interdicted special nuclear materials. Integration of microstructural, morphological, compositional, and molecular impurity signatures could provide significant advancements in forensic capabilities. We have applied rapid, high-sensitivity, hard X-ray synchrotron chemical imaging to analyze impurity signatures in two differently fabricated fuel pellets from the 5th Collaborative Materials Exercise (CMX5) of the IAEA Nuclear Forensics International Working Group. The spatial distributions, chemical compositions, and morphological and molecular characteristics of impurities were evaluated using X-ray absorption near-edge structure (XANES) and X-ray fluorescence chemical imaging to discover principal impurities, their granularity, particle sizes, modes of occurrence (distinct grains vs incorporation in the UO 2 lattice), and sources and mechanisms of incorporation. Differences in UO 2+x stoichiometry were detected at the microscale in nominally identical UO 2 ceramics (CMX5-A and CMX5-B), implying the presence of multiple UO 2 host phases with characteristic microstructures and feedstock compositions. Al, Fe, Ni, W, and Zr impurities and integrated impurity signature analysis identified distinctly different pellet synthesis and processing methods. For example, two different Al, W, and Zr populations in the CMX5-B sample indicated a more complex processing history than the CMX5-A sample. K-edge XANES measurements reveal both metallic and oxide forms of Fe and Ni but with different proportions between each sample. Altogether, these observations suggest multiple sources of impurities, including fabrication (e.g., force-sieving) and feedstock (mineral oxides). This study demonstrates the potential of synchrotron techniques to integrate different signatures across length scales (angstrom to micrometer) to detect and differentiate between contrasting UO 2 fuel fabrication techniques.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1978

Solar photolysis of water

A cyclic process is described for the solar photolysis of water, including a first stage in which water is reduced in the presence of a Eu(+2) photooxidizable reagent producing hydrogen and spent oxidized Eu(+3) reagent. The spent reagent Eu(+3) is reduced by means of a transition metal ligand complex reductant, RuL(+3) in a photoexcited state, such as a ruthenium pyridyl complex. Due to competing reactions between the photolysis and regeneration products, the photooxidation reaction must be separated from the regeneration in space and time by supporting the reagent and/or the reductant on solid supports and utilizing pH, wavelength and flow control to maximize hydrogen and oxygen production.

Ryason, P. R.↗
DOE OSTI2021

Mechanistic investigation of the aerobic oxidation of 2-pyridylacetate coordinated to a Ru(ii) polypyridyl complex

A new ruthenium polypyridyl complex, [Ru(bpy) 2 (acpy)] + (acpy = 2-pyridylacetate, bpy = 2,2'-bipyridine), was synthesized and fully characterized. Distinct from the previously reported analog, [Ru(bpy) 2 (pic)] + (pic = 2-pyridylcarboxylate), the new complex is unstable under aerobic conditions and undergoes oxidation to yield the corresponding α-keto-2-pyridyl-acetate (acpyoxi) coordinated to the Ru II center. The reaction is one of the few examples of C–H activation at mild conditions using O 2 as the primary oxidant and can provide mechanistic insights with important implications for catalysis. Theoretical and experimental investigations of this aerobic oxidative transformation indicate that it takes place in two steps, first producing the α-hydroxo-2-pyridyl-acetate analog and then the final product. The observed rate constant for the first oxidation was in the order of 10 -2 h -1 . The reaction is hindered in the presence of coordinating solvents indicating the role of the metal center in the process. Theoretical calculations at the M06-L level of theory were performed for multiple reaction pathways in order to gain insights into the most probable mechanism. Our results= indicate that O 2 binding to [Ru(bpy) 2 (acpy)] + is favored by the relative instability of the six-ring chelate formed by the acpy ligand and the resulting Ru III -OO˙- superoxo is stabilized by the carboxylate group in the coordination sphere. C–H activation by this species involves high activation free energies (ΔG ‡ = 41.1 kcal mol -1 ), thus the formation of a diruthenium μ-peroxo intermediate, [(Ru III (bpy) 2 (O-acpy)) 2 O 2 ] 2+ via interaction of a second [Ru(bpy) 2 (acpy)] + was examined as an alternative pathway. The dimer yields two Ru IV =O centers with a low ΔG ‡ of 2.3 kcal mol -1 . The resulting Ru IV =O species can activate C–H bonds in acpy (ΔG ‡ = 23.1 kcal mol -1 ) to produce the coordinated α-hydroxo-2-pyridylacetate. Further oxidation of this intermediate leads to the α-keto-2-pyridyl-acetate product. The findings provide new insights into the mechanism of C–H activation catalyzed by transition-metal complexes using O 2 as the sole oxygen source.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Building [U IV 70 (OH) 36 (O) 64 ] 4– oxocluster frameworks with sulfate, transition metals, and U V

Uranium (IV) oxide clusters, colloids, and materials are designed and studied for 1) nuclear materials applications, 2) understanding environmental fate and transport of actinides, and 3) exploring the complex bonding behavior of open-shell f-elements. U IV -oxyhydroxsulfate clusters are particularly relevant in industrial processes and in nature. Recent studies have shown that counter-cations to these polynuclear anions differentiate rich structural topologies in the solid-state. Here we present nine different structures with wheel-shaped [U 70 (OH) 36 (O) 64 (SO 4 ) 60 ] 4- (U 70 ) linked into 1-dimensional and 2-dimensional frameworks with sulfate, divalent transition metals (Cr II , Fe II , Co II , Ni II ) and U V . Here, the small-angle X-ray scattering of these phases dissolved in butylamine reveals differing supramolecular assembly of U 70 clusters, controlled primarily by sulfates. However, observed trends in transition metal linking guide future design of U 70 -materials with different topologies. Finally, U 70 linking via U IV -O-U V -O-U IV bridges presents a rare example of mixed oxidation state uranium oxides without disorder.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Well-Defined Iron Sites in Crystalline Carbon Nitride

Carbon nitride materials can be hosts for transition metal sites, but Mössbauer studies on iron complexes in carbon nitrides have always shown a mixture of environments and oxidation states. Here we describe the synthesis and characterization of a crystalline carbon nitride with stoichiometric iron sites that all have the same environment. The material (formula C 6 N 9 H 2 Fe 0.4 Li 1.2 Cl, abbreviated PTI/FeCl 2 ) is derived from reacting poly(triazine imide)·LiCl (PTI/LiCl) with a low-melting FeCl 2 /KCl flux, followed by anaerobic rinsing with methanol. X-ray diffraction, X-ray absorption and Mössbauer spectroscopies, and SQUID magnetometry indicate that there are tetrahedral high-spin iron(II) sites throughout the material, all having the same geometry. As a result, the material is active for electrocatalytic nitrate reduction to ammonia, with a production rate of ca. 0.1 mmol cm –2 h –1 and Faradaic efficiency of ca. 80% at −0.80 V vs RHE.

Anions↗
DOE OSTI2021

Electronically reconfigurable complex oxide heterostructure freestanding membranes

In recent years, lanthanum aluminate/strontium titanate (LAO/STO) heterointerfaces have been used to create a growing family of nanoelectronic devices based on nanoscale control of LAO/STO metal-to-insulator transition. The properties of these devices are wide-ranging, but they are restricted by nature of the underlying thick STO substrate. Here, single-crystal freestanding membranes based on LAO/STO heterostructures were fabricated, which can be directly integrated with other materials via van der Waals stacking. The key properties of LAO/STO are preserved when LAO/STO membranes are formed. Conductive atomic force microscope lithography is shown to successfully create reversible patterns of nanoscale conducting regions, which survive to millikelvin temperatures. The ability to form reconfigurable conducting nanostructures on LAO/STO membranes opens opportunities to integrate a variety of nanoelectronics with silicon-based architectures and flexible, magnetic, or superconducting materials.

36 MATERIALS SCIENCE↗
NASA NTRS1990

In-situ integrated processing and characterization of thin films of high temperature superconductors, dielectrics and semiconductors by MOCVD

In this strategy of depositing the basic building blocks of superconductors, semiconductors, and dielectric having common elements, researchers deposited superconducting films of Y-Ba-Cu-O, semiconductor films of Cu2O, and dielectric films of BaF2 and Y2O3 by metal oxide chemical vapor deposition (MOCVD). By switching source materials entering the chamber, and by using direct writting capability, complex device structures like three-terminal hybrid semiconductors/superconductors transistors can be fabricated. The Y-Ba-Cu-O superconducting thin films on BaF2/YSZ substrates show a T(sub c) of 80 K and are textured with most of the grains having their c-axis or a-axis perpendicular to the substrate. Electrical characteristics as well as structural characteristics of superconductors and related materials obtained by x-ray defraction, electron microscopy, and energy dispersive x-ray analysis are discussed.

Singh, R.↗
NASA NTRS1991

In-situ integrated processing and characterization of thin films of high temperature superconductors, dielectrics and semiconductors by MOCVD

In this strategy of depositing the basic building blocks of superconductors, semiconductors, and dielectrics having common elements, researchers deposited superconducting films of Y-Ba-Cu-O, semiconductor films of Cu2O, and dielectric films of BaF2 and Y2O3 by metal oxide chemical vapor deposition (MOCVD). By switching source materials entering the chamber, and by using direct writing capability, complex device structures like three terminal hybrid semiconductor/superconductor transistors can be fabricated. The Y-Ba-Cu-O superconducting thin films on BaF2/YSZ substrates show a T(sub c) of 80 K and are textured with most of the grains having their c-axis or a-axis perpendicular to the substrate. Electrical characteristics as well as structural characteristics of superconductors and related materials obtained by x-ray deffraction, electron microscopy, and energy dispersive x-ray analysis are discussed.

Singh, R.↗
DOE OSTI2024

Catalyst design for small molecule activation of energy consequence

This project targets the conversion of ubiquitous small molecules (e.g. NO, CO, H 2 O) into viable precursors to synthetic fuels. Current state of the art catalyst design has not directly targeted transition metal complexes capable of mediating the multi-electron redox processes necessary to reduce the overpotential (energy loss) required achieve efficient activation of small molecule substrates. In this vein, a new strategy has been developed for the assembly of polynuclear architectures; allowing for the construction of tunable polymetallic centers that assemble easily within a pre-organized template (conferring stability, selectivity and tunability) that can effect multi-electron redox processes for reactions. Catalyst development has commenced with the following target design elements: (1) catalysts featuring multiple transition metal ions in the same reaction space to greatly expand accessible molecular redox capabilities; (2) catalysts are assembled in a polynucleating ligand framework that permits control over the cluster morphology as well as the local steric and electronic environment of the transition metal ions within the cluster. The high-tunability of the catalyst composition (metal content) and geometric flexibility has permitted a rigorous assessment of electronic-structure-to-function relationship to be developed, further guiding synthetic efforts to realize more potent catalysts. The numerous permutations possible showcase the high degree of generality to this approach with many synthetic handles to tune redox and reaction chemistry. Trinuclear complexes have been synthesized featuring homo- and hetero-trinuclear cores featuring a variety of first row transition metal ions (Cr→Ni). The molecular clusters have been shown to successfully mediate multi-electron redox processes in a cooperative fashion without requiring strong chemical reductants or oxidants. The reactive molecular complexes are being utilized to activate and breakdown the robust bonds within typical waste stream small molecules (e.g., greenhouse gases) and convert them into value-added commodity chemicals. Ultimately, the catalysts developed by this approach will be required to convert energy acquired via renewable resources (e.g., solar or wind) into synthetic fuels as an energy storage mechanism.

10 SYNTHETIC FUELS↗
DOE OSTI2026

Accurate Electron-Phonon Interactions from Advanced Density Functional Theory

Electron-phonon coupling (EPC) is key to understanding charge transport, band renormalization, and superconductivity in energy materials, including correlated transition-metal oxides, ferroelectric perovskites, optoelectronic semiconductors, and phonon-mediated superconductors. Although first-principles density functional theory (DFT)-based EPC calculations are used widely, their predictive power is limited by the accuracy, transferability, and efficiency of the underlying exchange-correlation functionals. These limitations become exacerbated in complex 𝑑- and 𝑓-electron materials, where beyond-DFT approaches and additional corrections, such as the Hubbard 𝑈, are commonly invoked. Here, using the examples of Co⁢O and Ni⁢O, we show how the 𝑟 2 SCAN density functional correctly captures strong EPC effects in transition-metal oxides without requiring the introduction of Hubbard 𝑈 parameters. We also find that 𝑟 2 SCAN successfully describes the subtle interplay between ionic and covalent bonding, and strong EPC effects in the low-temperature rhombohedral phase of the prototypical ferroelectric Ba⁢Ti⁢O 3 , without requiring Hubbard 𝑈 and intersite 𝑉 corrections. We further demonstrate the ability of 𝑟 2 SCAN to accurately model the EPC of the main-group semiconductor Ga⁢As and the phonon-mediated superconducting properties of Mg⁢B 2 , with reliable electronic bands and phonons. Our study establishes 𝑟 2 SCAN-based EPC as a transferable, parameter-free, and computationally efficient framework for predictive material-specific modeling of EPC in energy materials, and opens a practical route toward high-throughput screening of superconductors, thermoelectrics, optoelectronic semiconductors, and oxide electrodes and catalysts.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Electrodeposition of Complex High Entropy Oxides via Water Droplet Formation and Conversion to Crystalline Alloy Nanoparticles

We report that a combination of electrodeposition and thermal reduction methods have been utilized for the synthesis of ligand-free FeNiCo alloy nanoparticles through a high-entropy oxide intermediate. These phases are of great interest to the electrocatalysis community, especially when formed by a sustainable chemistry method. This is successfully achieved by first forming a complex five element amorphous FeNiCoCrMn high-entropy oxide (HEO) phase via electrodeposition from a nanodroplet emulsion solution of the metal salt reactants. The amorphous oxide phase is then thermally treated and reduced at 570–600 °C to form the crystalline FeNiCo alloy with a separate CrMnO x cophase. The FeNiCo alloy is fully characterized by scanning transmission electron microscopy and energy-dispersive X-ray spectroscopy elemental analysis and is identified as a face-centered cubic crystal with the lattice constant a = 3.52 Å. The unoptimized, ligand-free FeNiCo NPs activity toward the oxygen evolution reaction is evaluated in alkaline solution and found to have an ~185 mV more cathodic onset potential than the Pt metal. Beyond being able to synthesize highly crystalline, ligand-free FeNiCo nanoparticles, the demonstrated and relatively simple two-step process is ideal for the synthesis of tailor-made nanoparticles where the desired composition is not easily achieved with classical solution-based chemistries.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗