Search NASA⌕ Search

SEARCH · Search NASA

Results for “decay heat”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
NASA NTRS2019

Versatile Nuclear Thermal Propulsion (NTP)

A study was initiated to investigate propulsion stage and mission architecture options potentially enabled by fission energy. One initial concept is a versatile Nuclear Thermal Propulsion (NTP) system with a maximum specific impulse of 900 s and a maximum thrust (per engine) of 15 klbf. The system assumes a monopropellant stage (hydrogen), and is designed to also provide 300 lbf of thrust (potentially split between multiple thrusters) at an Isp > 500 s for orbital maneuvering and station keeping. Boost pumps are used to assist with engine decay heat removal and low thrust engine burns, and to compensate for partial tank depressurization during full thrust engine burns. Potential stage assembly orbits that take full advantage of launch vehicle payload mass and volume capabilities are being assessed. The potential for using NTP engines to also generate a small to moderate amount of electrical power is also being evaluated. A first generation versatile NTP stage could enable 8 of 9 upcoming opportunities for short (less than 24 month) round trip human missions to Mars. A second generation versatile NTP is under consideration that could potentially provide a maximum specific impulse of 1800 s at 15 klbf, and enable ambitious missions throughout the solar system. The second generation NTP system under consideration would also allow a choice of volatiles to be used as propellant. This would potentially allow in-situ resources such as water, ammonia, methane, or other compounds to be used directly as propellant by the second generation engine.

Houts, Mike↗
DOE OSTI2020

Generation IV Benchmarking of TRISO Fuel Performance Models Under Accident Conditions Final Report

The Generation IV International Forum (GIF) is a co-operative international endeavor of fourteen members organized to carry out the research and development needed to establish the feasibility and performance capabilities of the next generation nuclear energy systems. GIF selected six reactor technologies, amongst which is the Very High Temperature Reactor (VHTR) that is primarily dedicated to the cogeneration of electricity and hydrogen. The technical basis for VHTR is the tristructural isotropic (TRISO)-coated particle fuel, the graphite as the core structure, helium coolant, as well as the dedicated core layout and lower power density to removal decay heat in a natural way. At the heart of safety features of the VHTR concept lie the TRISO fuel particles that are designed to keep their structural integrity and retain fission products at temperatures up to 1600°C. As part as the design and future operation of VHTRs, a key aspect is the accurate prediction of fuel performance under irradiation and accident conditions. Modeling and simulation allow prediction of TRISO fuel behavior when subject to neutron flux and in high temperature accident scenarios. The refinement of the fuel performance models and codes is performed by comparison to in-pile and out-of-pile experimental data that reproduce the expected irradiation conditions in high temperature gas-cooled reactors (HTGRs). Historically, the International Atomic Energy Agency (IAEA) developed a benchmark dedicated to the validation of predictive methods for fuel and fission product behavior through the Coordinated Research Program CRP-2 (IAEA, 1997). CRP-2 was later updated to cover fuel fabrication, quality assurance, irradiation performance, safety testing, and spent fuel. The scope of the resulting CRP-6 benchmarks focused on HTGR fuel performance and fission product release (IAEA, 2012). Taking advantage of additional TRISO fuel fabrication, irradiation, and safety testing campaigns, GIF launched a Generation IV Benchmarking of TRISO Fuel Performance Models under Accident Conditions in late 2015. This GIF benchmark is a three-year program steered by Idaho National Laboratory (INL, USA). The other participants include the Japan Atomic Energy Agency (JAEA, Japan) and the Korea Atomic Energy Research Institute (KAERI, Korea). The objectives of the benchmark are to: follow on the IAEA CRP benchmarks, (2) model fission product release under accident conditions, (3) compare results obtained by the fuel performance modeling codes of the benchmark participants, and (4) compare these code predictions to experimental data. Safety tests chosen for modeling include the first and second experiments of the Advanced Gas Reactor program (AGR-1 and AGR-2) and the High Flux Reactor (HFR) EU1bis experiment. This report presents the results obtained by the three research institutions using their respective fuel performance modeling codes. Comparisons of the corresponding fission product release predictions are made with experimental data from AGR-1, AGR-2, and HFR-EU1bis. The benchmark results show good agreements between all participants but also show a general trend of over-prediction of the experimental release data, which is mainly attributed to the use of over-estimated diffusion coefficients.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2020

Radiation Chemistry Research for Improved Nuclear Fuel Cycles

Nuclear energy is a key component of a global, low-carbon energy future. One of the challenges facing large-scale deployment of nuclear power is the long-term disposition of used nuclear fuel. Due to the political and technical challenges of siting deep geologic storage facilities, reprocessing of used nuclear fuel is desirable to reduce the total volume and decay heat of waste requiring long-term storage, enabling efficient usage of geologic storage repositories. However nuclear fuel reprocessing is complicated by intense multi-component radiation fields that degrade solvent systems that are used for this purpose. Resulting radiolytic degradation can result in reduced performance over time, and generation of additional waste. Thus, an understanding of the radiation-induced chemistry of these reprocessing solvent systems is crucial to for the development of new, radiation-resistant processes for efficiently treating used nuclear fuel. Controlled irradiation experiments combined with high-performance chromatography and mass spectrometry have provided comprehensive knowledge of radiolytic degradation pathways and kinetics, which is needed to predict the effect of radiation-induced chemistry on the performance of the nuclear fuel reprocessing technology. This talk will give an overview of recent progress in research on the radiation chemistry of fuel reprocessing molecules conducted by the Idaho National Laboratory Center for Radiation Chemistry Research (CR2) in conjunction with the Molecular Mass Spectrometry and Chromatography group.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2023

PARTITIONING AND TRANSMUTATION OF USED NUCLEAR FUEL IN SUPPORT OF GEOLOGICAL WASTE DISPOSAL

Nuclear energy is a low-carbon technology that generates bulk baseload electricity and supports long-lasting eco-friendly sustainability goals. However, it still faces challenges, such as the securing and managing of long-lived nuclear actinides and fission products—most notably the used fuel, which is considered high-level waste (HLW). Direct geological waste disposal would be the most economical option for HLW but requires highly qualified sites whose geophysical behavior will remain stable for 10,000 years. Partitioning and transmutation (P&T) of used fuel reduces radioactivity and decay heat generation, enabling efficient geological waste disposal. P&T research and development, along with the prospects of P&T techniques such as wet/dry separation and accelerator-driven systems, were reviewed to identify critical needs that must be met to foster their successful implementation.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2022

The Hanford Lead Canister Collaboration

The Hanford Site, Management of the Cesium and Strontium Capsules (MCSC) Project is preparing to place cesium and strontium material into dry storage using stainless steel canisters that are housed inside vertical concrete casks. Part of the site’s aging management program is to use a spare canister system as a leading indicator canister to provide advance warning for signs of chloride induced stress corrosion cracking (CISCC) or any other kind of canister degradation that might take place over the system’s 300-year design life. The Hanford Lead Canister (HLC) will use electric heaters to simulate the decay heat of cesium and strontium to ensure the HLC simulates the environment and conditions the capsule-loaded systems will experience. In addition to being part of the site’s aging management program, the HLC is being made available for research and development that advances the industry regarding canister mitigation and repair (M&R). The HLC system closely resembles current spent nuclear fuel (SNF) dry storage systems, making the HLC useful for demonstrating technologies or performing research that is relevant to SNF canisters . Several organizations are collaborating to prepare the HLC, along with technical strategy, to perform the needed research and development activities, to include the Pacific Northwest National Laboratory (PNNL), Central Plateau Cleanup Company (CPCCo), and the Electric Power Research Institute (EPRI). In one example of this collaborative research, EPRI is planning to use the HLC to demonstrate in-situ M&R technologies under controlled conditions before the HLC is deployed at Hanford. There is a period of several years when the HLC will be available for canister M&R activity before it is deployed. This paper describes the development of the HLC, its role in the Hanford site’s MCSC Project aging management program, and some of the research activities that are planned for the HLC.

Klymyshyn, Nicholas A.↗
DOE OSTI2023

PARTITIONING AND TRANSMUTATION OF USED NUCLEAR FUEL IN SUPPORT OF GEOLOGICAL WASTE DISPOSAL

Nuclear energy is a low-carbon technology that generates bulk baseload electricity and supports long-lasting eco-friendly sustainability goals. However, it still faces challenges, such as the securing and managing of long-lived nuclear actinides and fission products—most notably the used fuel, which is considered high-level waste (HLW). Direct geological waste disposal would be the most economical option for HLW but requires highly qualified sites whose geophysical behavior will remain stable for 10,000 years. Partitioning and transmutation (P&T) of used fuel reduces radioactivity and decay heat generation, enabling efficient geological waste disposal. P&T research and development, along with the prospects of P&T techniques such as wet/dry separation and accelerator-driven systems, were reviewed to identify critical needs that must be met to foster their successful implementation.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2020

The TRANSCEND University Consortium: Theme 4: Nuclear Materials - 20431

The safe and secure management of Pu is a matter of international concern, with ∼250 t of separated Pu currently stockpiled worldwide. The UK's civil inventory of nuclear materials contains significant stocks of separated Pu from the reprocessing of Magnox and AGR spent fuels. The preferred option for the 138.5 tonnes of Pu is re-use as mixed oxide (MOx) fuel, although 5% is not suitable for re-use and is recommended for direct disposal. However, it will take more than 15 years to implement re-use, requiring that the Pu be kept in interim storage in its current state for that period, i.e. as PuO{sub 2} powder within inert steel storage cans at Sellafield. The focus of the work presented here is thus plutonium storage and the direct disposal of plutonium. The Research and Development needs of both are now pressing: in the case of storage due to it being the current default; in the case of immobilization and disposal because of a comparative lack of Research and Development on Pu conditioning and packaging due to policy uncertainty as to whether it would be disposed of in a Geologic Disposal Facility (GDF). Addressing these needs is complicated by Pu's high radioactivity, decay heat and radiotoxicity, criticality, nuclear safeguard requirements and, for some UK Pu contaminated materials targeted for disposal, poor inventory. Thus, there is also a critical requirement for underpinning research on Pu bearing materials in these two contexts. In response to these needs, the TRANSCEND Consortium (Transformative Science and Engineering for Nuclear Decommissioning, a multi-disciplinary collaboration of 11 universities and 8 key industry partners from across the UK's civil nuclear sector) is seeking to provide technical underpinning to ongoing option development for the UK's civil Pu stockpile. Whilst understanding the behaviour of plutonium during its re-use as MOx is beyond the scope of the TRANSCEND Consortium work plan, the main objectives of the work are: (1) For interim storage: to understand how the surface structure and properties of pristine and radiation damaged PuO{sub 2} change with time in the absence and presence of water; and (2) For immobilization and disposal: to understand the mechanisms of incorporation of Pu into ceramic and glass-ceramic waste-forms, as well as the effect on these of self-induced radiation damage. Each objective is being addressed through separate work packages, the details of which are discussed in this paper. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2021

Gas-phase stability of large lanthanide:diglycolamide clusters evaluated using collision-induced dissociation

Efficient utilization of long-term deep geologic storage repositories is critical for the large-scale deployment of nuclear energy. As the minor actinides (americium and curium) are the largest contributor to the decay heat of used nuclear fuel after a few hundred years, their removal from used fuel prior to disposal can significantly increase the amount of waste that can be stored in a given volume. The development of ligands that can effectively separate the minor actinides from other components of used nuclear fuel are crucial to efficient utilization of geological storage repositories. N,N,N’,N’-tetraoctyl diglycolamide (TODGA) is a promising extractant for the separation of lanthanides and the minor actinides from other components of used nuclear fuel. While the use of TODGA in f-element separations has been investigated in process-based formulations, gas-phase metal ion cluster experiments enable the study of covalent interactions in reprocessing systems absent from solvent effects. Exploring fundamental differences in lanthanide-ligand covalent interactions can impact the development and implementation of actinide-lanthanide separation systems in nuclear fuels reprocessing. In this study, lanthanide-TODGA clusters were synthesized in the gas-phase and identified using mass spectrometry fragmentation experiments. Large europium and samarium clusters were identified that contained up to 8 and 10 bound TODGA ligands, respectively; this was surprising due to the size and multidentate binding that is normal for TODGA. In addition, while smaller clusters showed evidence of sequential ligand fragmentation, larger clusters displayed the loss of neutral TODGA with applied collision voltage. Interestingly, the voltage required for this removal decreased as more TODGA ligands were bound to the metal, suggesting that the metal coordination sphere was becoming more saturated and TODGA ligands were more weakly bound as the clusters got larger.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2024

Liquid Fuel Qualification for Molten Salt Reactors: Identification of Gaps and Challenges

This report identifies and describes challenges in implementing the MSR fuel qualification process described in NUREG/CR-7299 Fuel Qualification for Molten Salt Reactors. This report provides additional information including examples and additional use case descriptions to assist applicants in understanding the content and structure of the information necessary to develop a fuel qualification report. In particular, the current report emphasizes the relationship of fuel salt qualification to the contents of the plant safety analysis report. This report is limited to the safety functions relevant to the reactor aspects of the nuclear power plant. MSRs that include significant fuel salt processing would also need to address the safety aspects of the processing facility. No significant gaps were found in NUREG/CR-7299. However, NUREG/CR-7299 focuses on generic descriptions of how the fuel salt supports achievement of plant fundamental safety functions. A fuel salt qualification report will need explicitly address the role of the fuel salt in meeting regulatory requirements for a particular plant. NUREG/CR-7299 also provides a regulatory mapping between NRC rules and the safety functions. However, by remaining at a fundamental level, NUREG/CR-7299 does not address plant specific safety analysis. Some aspects of the safety analysis may require additional emphasis for designs that incorporate particular features (such as additional confirmation of decay heat rejection performance for higher power reactors). This report provides additional structure to enable an applicant to develop their plant-specific safety analysis.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2025

MARIE: A Python-Based Framework for Comprehensive Fuel Recycling Modeling

One of the most pressing challenges to the continued deployment of nuclear energy systems is in the ultimate management and disposition of discharged fuel assemblies. While reprocessing and recovery of valuable materials from UNF assemblies has been considered as part of an overall strategy for minimization of the volume of reactor-based wastes to be managed, the deployment of commercial-scale reprocessing facilities presents an enormous economic challenge. The MARIE software package has been developed as a means of confronting this challenge. Representing components of a generic fuel reprocessing operation as individual physical processes, MARIE is designed as a modular framework intended to allow for analysis and cost-optimization for a hypothetical reprocessing facility while realistically accounting for the physical characteristics of the used fuel source term, such as decay heat, activity, and radiation dose (informing corresponding shielding requirements). Capabilities supported by MARIE include head-end operations such as fuel shearing, voloxidation, and dissolution; generic solvent extraction operations informed by available open-literature data; a suite of unit operations intended to represent electrochemical processing of used fuel assemblies (i.e., oxide reduction, electrorefining, and electrowinning); and finally, accounting for both costs and physical features of discharged waste streams, which can be used to inform follow-on analyses such as the feasibility of deep-borehole disposal of HLW. This paper presents an overview of the MARIE software capabilities, including how individual unit operations are implemented to enable a larger-scale optimization of a hypothetical reprocessing operation on aspects such as cost and recovery of valuable materials.

Skutnik, Steve [ORNL] (ORCID:000000016441135X)↗
DOE OSTI2025

Thermal Hydraulics Validation Activities in the ART-GCR Campaign

The Advanced Reactor Technologies - Gas Cooled Reactor Campaign (ART-GCR) is part of the United States Department of Energy - Office of Nuclear Energy's Advanced Reactor Technologies program aimed at developing a High Temperature Gas-cooled Reactor (HTGR) which will offer enhancements in safety and efficiency. The Design, Methods, and Validation arm of the ART-GCR program provides experience and advanced tools for HTGR design and analysis. The Methods and Validation arm is developing data to validate predictions of decay heat removal through an extensive experimental campaign the Natural Convection Shutdown Heat Removal Test Facility at Argonne National Laboratory. In-core thermal hydraulics validation is being facilitated through the OECD/NEA's Thermal Hydraulic Code Validation Benchmark for High Temperature Gas-Cooled Reactors using HTTF Data. That benchmark contains code-to-code and code-to-data comparisons for 3 sets of HTGR thermal hydraulics phenomena. This ongoing benchmark activity has 16 participants from 9 countries developing leading insights into HTGR thermal hydraulics code validation. The ART-GCR campaign is also working on the development of state-of-the-art MOOSE-based models of the High Temperature Engineering Test Reactor (HTTR). Through the OECD/NEA's HTTR Loss of Forced Cooling (LOFC) program, the ART-GCR campaign is developing a multiphysics transient code validation benchmark based on 3 HTTR experiments that will provide an opportunity for international collaboration on multiphysics code validation.

22 - GENERAL STUDIES OF NUCLEAR REACTORS↗
NASA NTRS2008

Thermal Capacitance (Slug) Calorimeter Theory Including Heat Losses and Other Decaying Processes

A mathematical model, termed the Slug Loss Model, has been developed for describing thermal capacitance (slug) calorimeter behavior when heat losses and other decaying processes are not negligible. This model results in the temperature time slope taking the mathematical form of exponential decay. When data is found to fit well to this model, it allows a heat flux value to be calculated that corrects for the losses and may be a better estimate of the cold wall fully catalytic heat flux, as is desired in arc jet testing. The model was applied to the data from a copper slug calorimeter inserted during a particularly severe high heating rate arc jet run to illustrate its use. The Slug Loss Model gave a cold wall heat flux 15% higher than the value of 2,250 W/sq cm obtained from the conventional approach to processing the data (where no correction is made for losses). For comparison, a Finite Element Analysis (FEA) model was created and applied to the same data, where conduction heat losses from the slug were simulated. The heat flux determined by the FEA model was found to be in close agreement with the heat flux determined by the Slug Loss Model.

Hightower, T. Mark↗
DOE OSTI2022

Quantifying Thermal Output of Energetic Materials (LDRD Final Report)

We present the results of an LDRD project, funded by the Nuclear Deterrence IA, to develop capabilities for quantitative assessment of pyrotechnic thermal output. The thermal battery igniter is used as an exemplar system. Experimental methodologies for thermal output evaluation are demonstrated here, which can help designers and engineers better specify pyrotechnic components , provide thermal output guidelines for new formulations, and generate new metrics for assessing component performance and margin given a known failure condition. A heat-transfer analysis confirms that the dominant mode of energy transfer from the pyrotechnic output plume to the heat pellet is conduction via deposition of hot titanium particles. A simple lumped-parameter model of titanium particle heat transfer and a detailed multi-phase model of deposition heat transfer are discussed. Pyrotechnic function, as defined by "go/no-go" standoff testing of a heat pellet, is correlated with experimentally measured igniter plume temperature, titanium metal particle temperature, and energy deposition. Three high-speed thermal diagnostics were developed for this task. A three-color imaging pyrometer, acquiring 100k images per second on three color channels, is deployed for measurement of titanium particle temperatures. Complimentary measurements of the overall igniter plume emission ("color") temperature were conducted using a transmission-grating spectrograph in line-imaging mode. Heat flux and energy deposition to a cold wall at the heat-pellet location were estimated using an eroding thermocouple probe, with a frequency response of ~5 kHz. Ultimate "go/no-go" function in the igniter/heat-pellet system was correlated with quantitative thermal metrics, in particular surface energy deposition and plume color temperature. Titanium metal-particle and plume color temperatures both experience an upper bound approximated by the 3245-K boiling point of TiO 2 . Average metal-particle temperatures remained nearly constant for all standoff distances at T = 2850 K, ± 300 K, while plume color temperature and heat flux decay with standoff—suggesting that heat-pellet failure results from a drop in metal-particle flux and not particle temperature. At 50% likelihood of heat-pellet failure, peak time-resolved plume color temperatures drop well below TiO 2 boiling to ~2000 - 2200 K, near the TiO 2 melting point. Estimates of peak heat flux decline from up to 1 GW/m 2 for near-field standoffs to below 320 MW/m 2 at 50% failure likelihood.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Design of a prototypical natural circulation water-based reactor cavity cooling system (RCCS) for a pebble-bed generic FHR

A prototypical natural circulation water-based reactor cavity cooling system (RCCS) for the UC Berkeley Mark-1 pebble-bed gFHR is designed based on one-dimensional thermal hydraulics modeling and optimization implemented in an in-house MATLAB code. The model employs a lumped core consisting of fuel pebble and graphite pebble regions, while the graphite reflector, vessel, and RCCS are represented as separate but energy-coupled regions. The model is derived based on steady state energy balance equations accounting for conductive heat transfer from the lumped core to the vessel and subsequent radiative heat transfer to the RCCS and convective heat transfer in the water. Further, mass flow rate is calculated based on momentum and thermal energy balance in the RCCS. Starting with ANL’s water NSTF as baseline, effects of RCCS design parameters such as size of the plate between pipes, pipe diameter, source-to-sink distance, surface emissivity, and pitch from the core are examined in an integral effects framework which accounts for subsequent variation of the mass flow rate, number of pipes, convection coefficient, mean region and surface temperatures, radiative view factors, and water outlet temperature. The importance of including a prototypical reactor design in RCCS design calculations is emphasized as the calculations show that temperature drops from the core to the RCCS fluid to transfer the heat tend to be the limitation not the heat removal capacity of the fluid. A closed-loop design is obtained with capability to safely remove up to 0.72% of the nominal reactor power at maximum estimated peak conditions and 0.40% at shutdown. The design is based on physics calculations and does not account for economic optimization.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
DOE OSTI2021

Repetitively pulsed nanosecond discharge plasma decay in propane–oxygen gas mixture in the presence of a heating electric field

Plasma decay in the afterglow of a repetitively pulsed nanosecond discharge in a stoichiometric propane–oxygen mixture was experimentally investigated when a weak heating DC electric field was applied and in its absence. The discharge was ignited at room gas temperature and a pressure of 1–2 Torr and was characterized by low specific energy inputs (<0.004 eV per molecule in one pulse). Using microwave interferometry, the temporal evolution of the electron density during plasma decay was studied, and the effective recombination coefficients were obtained from data processing. It was shown that the rate of plasma decay behaved in a non-monotonic manner with increasing degree of propane oxidation; at first the decay rate grew, then passed through a maximum, fell and saturated in the limit of a large (~2000) number of pulses. In this limit, the effect of the heating DC electric field on the plasma decay decreased with approaching chemical equilibrium. Numerical simulation of the observed effects was performed for low and high oxidation degrees of propane taking into account changes in the composition of positive ions in the plasma. Good agreement was obtained between measurements and calculations of the electron density during plasma decay in these cases. Here it was shown that the formation of cluster ions in the discharge afterglow plays a fundamental role. The plasma decay was controlled by electron recombination with hydrocarbon cluster ion at low oxidation degree of propane and with water cluster (hydrated) ions at high oxidation degree. A hypothesis was proposed to explain the observed nonmonotonic behavior of the plasma decay rate with an increase in the propane oxidation in the discharge, based on the formation of hydrated hydrocarbon ions C x H y + (H 2 O) k at moderate oxidation degrees.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗