Search NASA⌕ Search

SEARCH · Search NASA

Results for “ethylene oxide”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Ion Transport in 2D Nanostructured $\pi$-Conjugated Thieno[3,2- b ]thiophene-Based Liquid Crystal

Leveraging the self-assembling behavior of liquid crystals designed for controlling ion transport is of both fundamental and technological significance. Here, we have designed and prepared a liquid crystal that contains (2,5-bis(5-(2,5,8,11-tetraoxatridecan-13-yl)thiophen-2yl)thieno[3,2-b]thiophene (BTTT) as mesogenic core and conjugated segment and symmetric tetra(ethylene oxide) (EO4) as polar side chains for ionic conducting regions. Driven by the crystallization of the BTTT cores, BTTT/dEO4 exhibits well-ordered smectic phases below 71.5 °C as confirmed by differential scanning calorimetry, polarized optical microscope, temperature dependent wide-angle X-ray scattering and grazing incidence wide-angle X-ray scattering (GIWAXS). We adopted a combination of experimental GIWAXS and molecular dynamics (MD) simulations to better understand the molecular packing of BTTT/dEO4 films, particularly when loaded with the ion conducting salt, lithium bis(trifluoromethanesulfonyl)imide (LiTFSI). Ionic conduction of BTTT/dEO4 is realized by the addition of LiTFSI, with the material able to maintain smectic phases up to r = [Li + ]/[EO] = 0.1. In this work, The highest ionic conductivity of 8 × 10 -3 S/cm was attained at an intermedium salt concentration of r = 0.05. It was also found that ion conduction in BTTT/dEO4 is enhanced by forming a smectic layered structure with irregular interfaces between the BTTT and EO4 layers and by the lateral film expansion upon salt addition. This can be explained by the enhancement of the misalignment and configurational entropy of the side chains, which increase their local mobility and that of the solvated ions. Our molecular design thus illustrates how, beyond the favorable energetic interactions that drive the assembly and ion solvating domains, modulation of entropic effects can also be favorably harnessed to improve ion conduction.

thin film electrochemical impedance spectroscopy↗
DOE OSTI2021

Molecular Weight Dependence of Block Copolymer Micelle Fragmentation Kinetics

The effect of molecular weight (M) on the fragmentation kinetics of micelles formed by 1,2-polybutadiene-block-poly(ethylene oxide) (PB-PEO) copolymers was studied in the ionic liquid 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide. A series of six samples, with total M ranging from 10 4 to 10 5 g mol –1 and nearly constant composition (f PEO ≈ 0.4), were examined; all six formed spherical micelles with PEO coronas. Nonequilibrium PB-PEO micelles were prepared by direct dissolution, a process that systematically produces nanoparticles with mean aggregation numbers more than twice the equilibrium values. When subjected to high temperature annealing (170 °C), the average micelle radius was found to decrease substantially, as determined by temperature-jump dynamic light scattering (T-jump DLS) and time-resolved small-angle X-ray scattering (TR-SAXS). Furthermore, the characteristic fragmentation times (τ) were found to increase strongly with increasing degree of polymerization N, as τ ~ N 1.8 . This result compares favorably with the prediction of a previously untested model.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2025

Facile One-Pot Block Copolymer-Mediated Solvothermal Approach for Synthesis of High-Entropy Alloy with Enhanced OER Activity

Herein, we introduce a straightforward synthesis approach for highly active dendritic multimetallic high-entropy alloy (DMHEA@PtIrPdAgRu) nanoparticles with sufficient entropic mixing, featuring uniform distribution of five noble group metals (Pt, Ir, Pd, Ag, and Ru) via a block copolymer-mediated one-pot solvothermal reduction method for oxygen evolution reaction (OER). In this synthesis, N,N -dimethylformamide (DMF) is used as a reductant as well as solvent and core–shell-corona-type (poly(styrene)- block -poly(vinylpyridine)- block -poly(ethylene oxide)) (PS-PVP-PEO) block copolymer as a structure directing agent. The cooperative effect between the copolymer architecture and the reducing environment of DMF promoted a confined nucleation mechanism for forming a single-phase dendritic structure HEA with high compositional uniformity, thereby mitigating phase segregation, a common challenge in the synthesis of multimetallic nanoparticles. This prepared DMHEA@PtIrPdAgRu catalyst exhibits a low overpotential of 490 mV to attain a high current density of 100 mA cm –2 with a Tafel slope of 442 mV dec –1 for oxygen evolution. The superior OER performance is attributed to the synergistic cooperation among its active and coordinated metal centers as well as the incorporation of corrosion-resistant metal like platinum.

block copolymer↗
DOE OSTI2021

Manipulating polymer composition to create low-cost, high-fidelity sensors for indoor CO2 monitoring

Abstract Carbon dioxide (CO 2 ) has been linked to many deleterious health effects, and it has also been used as a proxy for building occupancy measurements. These applications have created a need for low-cost and low-power CO 2 sensors that can be seamlessly incorporated into existing buildings. We report a resonant mass sensor coated with a solution-processable polymer blend of poly(ethylene oxide) (PEO) and poly(ethyleneimine) (PEI) for the detection of CO 2 across multiple use conditions. Controlling the polymer blend composition and nanostructure enabled better transport of the analyte gas into the sensing layer, which allowed for significantly enhanced CO 2 sensing relative to the state of the art. Moreover, the hydrophilic nature of PEO resulted in water uptake, which provided for higher sensing sensitivity at elevated humidity conditions. Therefore, this key integration of materials and resonant sensor platform could be a potential solution in the future for CO 2 monitoring in smart infrastructure.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Gel composite electrolyte – an effective way to utilize ceramic fillers in lithium batteries

Achieving synergy between ion-conducting polymers and ceramics in a composite electrolyte has been proven to be difficult as the complicated ceramic/polymer interface presents challenges to understand and control. In this work, we report a strategy to utilize discrete ceramic fillers to form a gel composite electrolyte with enhanced transport properties for lithium metal batteries. The matrix of the composite membrane is crosslinked poly(ethylene oxide) with bis(trifluoromethane)sulfonimide lithium salt (LiTFSI). The membrane is plasticized with tetraethylene glycol dimethyl ether (TEGDME). The incorporation of doped-lithium aluminum titanium phosphate particles (LICGC™) into the membrane greatly improves the membrane's cycling characteristics against the lithium electrode, exhibiting lower interfacial impedance, lower overpotential and higher rate capability. The underpinnings of the superior performance of the gel composite electrolyte are discussed in depth. LICGC™ can immobilize the TFSI - anions in the polymer matrix and simultaneously promote Li+ transport by increasing the plasticizer to Li + ratio. Further, the transport enhancement is achieved without sacrificing mechanical properties. The composite membrane shows significantly improved handleability and processability. This work sheds light on the design strategy for a safe electrolyte towards stable Li metal batteries.

25 ENERGY STORAGE↗
DOE OSTI2023

Microfluidic synthesis of multilayered lipid–polymer hybrid nanoparticles for the formulation of low solubility drugs

Hybrid phospholipid/block copolymer membranes where polymers and lipids are molecularly mixed or phase-separated into polymer-rich and lipid-rich domains are promising drug delivery materials. Harnessing the chemical diversity of polymers and the biocompatability of lipids is a compelling approach to design the next generation of drug carriers. Here, we report on the development of a microfluidics-based strategy analogous to produce lipid nanoparticles (LNPs) for the nanomanufacturing of multilayered hybrid nanoparticles (HNPs). In conclusion, using X-ray scattering, Cryo-electron, and polarized microscopy we show that phosphatidylcholine (PC) and PBD-b-PEO (poly(butadiene-block-ethylene oxide)) hybrid membranes can be nanomanufactured by microfluidics into HNPs with dense and multilayered cores which are ideal carriers of low-solubility drugs of the Biopharmaceutical Classification System (BCS) II and IV such as antimalarial DSM265 and Paclitaxel, respectively.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Block copolymer self-assembly derived mesoporous magnetic materials with three-dimensionally (3D) co-continuous gyroid nanostructure

Magnetic nanomaterials are gaining interest for their many applications in technological areas from information science and computing to next-generation quantum energy materials. While magnetic materials have historically been nanostructured through techniques such as lithography and molecular beam epitaxy, there has recently been growing interest in using soft matter self-assembly. In this work, a triblock terpolymer, poly(isoprene-block-styrene-block-ethylene oxide) (ISO), is used as a structure directing agent for aluminosilicate sol nanoparticles and magnetic material precursors to generate organic–inorganic bulk hybrid films with co-continuous morphology. After thermal processing into mesoporous materials, results from a combination of small angle X-ray scattering (SAXS) and scanning electron microscopy (SEM) are consistent with the double gyroid morphology. Nitrogen sorption measurements reveal a type IV isotherm with H1 hysteresis, and yield a specific surface area of around 200 m 2 g −1 and an average pore size of 23 nm. The magnetization of the mesostructured material as a function of applied field shows magnetic hysteresis and coercivity at 300 K and 10 K. Comparison of magnetic measurements between the mesoporous gyroid and an unstructured bulk magnetic material, derived from the identical inorganic precursors, reveals the structured material exhibits a coercivity of 250 Oe, opposed to 148 Oe for the unstructured at 10 K, and presence of remnant magnetic moment not conventionally found in bulk hematite; both of these properties are attributed to the mesostructure. This scalable route to mesoporous magnetic materials with co-continuous morphologies from block copolymer self-assembly may provide a pathway to advanced magnetic nanomaterials with a range of potential applications.

Chemistry↗
DOE OSTI2024

Generalized vs. fractional: a comparative analysis of Maxwell models applied to entangled polymer solutions

Fractional viscoelastic models provide an excellent description of rheological data for polymer systems with power-law behaviour. However, the physical interpretation of their model parameters, which carry fractional units of time, often remains elusive. We show that for poly(ethylene oxide) (PEO) solutions, the fractional Maxwell model (FMM) requires much fewer model parameters than the classical generalized Maxwell model for a good description of the data and that it can be applied consistently to solutions with varying degrees of viscoelasticity. Despite their fractional units, the parameters exhibit scaling laws similar to classical parameters as a function of polymer concentration.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Upcycling waste PET into functional multiblock copolymers through controlled macromolecular design

Poly(ethylene terephthalate) (PET) oligomers derived from glycolysis depolymerization were converted into multiblock copolymers through diisocyanate-mediated coupling with dihydroxy-terminated oligomers, enabling precise control over copolymer sequence distribution, connectivity, and mechanical performance. Here, we demonstrate that telechelic PET oligomers isolated directly from depolymerized consumer waste can serve as reactive building blocks for the formation of segmented multiblock copolymers, eliminating the need to revert to monomeric feedstocks. Dihydroxy-terminated PET oligomers (Mw ≈ 8 kg mol−1) were coupled with poly(ethylene oxide) (PEO, Mw ≈ 4 kg mol−1) to form PET-PEO multiblock copolymers with high molar mass (Mw ≈ 160 kg mol−1). We further show that the timing of end-capping reactions provides a key control parameter that governs the competition between chain extension and termination, thereby dictating the resulting multiblock architecture and molecular-weight evolution. Evaluation of their mechanical properties reveals that virgin PET exhibits high modulus (∼3 GPa) and strength (43 MPa) but limited ductility (<10% elongation). In contrast, PET–PEO multiblock copolymers retain comparable tensile strength (44 MPa), albeit while exhibiting dramatically enhanced ductility (>90% elongation), forming tougher materials with efficient stress transfer between the rigid PET domains and the flexible PEO segments. When incorporated into PET/PEO blends at low loadings, the multiblock copolymers serve as effective compatibilizers, yielding materials with an intermediate modulus (1.1–1.2 GPa) and improved elongation compared to uncompatibilized blends. Furthermore, the presence of PEO blocks increases water uptake and gas permeability relative to virgin PET, reflecting the tunability of molecular transport through the copolymeric blocks. To our knowledge, this represents the first report of PET–PEO multiblock copolymers derived from post-consumer PET for gas transport applications. These results demonstrate that multiblock copolymer formation from telechelic PET oligomers provides a versatile platform for tailoring the mechanical and transport behavior of polyester-based materials through controlled macromolecular design and establishes a generalizable strategy for transforming consumer plastic waste into functional segmented polymers without requiring complete depolymerization to monomers.

Watson-Sanders, Shelby [Department of Chemistry, U↗
DOE OSTI2023

Dynamics of polymer electrolyte with LiTFSI via Quasi-Elastic Neutron Scattering

Most lithium batteries offer a wide range of applications. However, safety issues are still an unresolved issue for several applications. To solve the safety issue of Li-ion batteries, solid polymer electrolyte is a promising candidate to replace commercial liquid electrolyte. A 4-arm star poly(ethylene oxide) polymer with LiTFSI salt as an electrolyte was studied. The dynamics of this polymer were explored with the Quasi-Elastic Neutron Scattering technique. Furthermore, the influence of temperature and Li salt concentration on the polymer dynamics was investigated. The dynamics of the polymer ends of the arm show much higher flexibility than the core parts making those types of polymers attractive for further studies in battery research.

Wang, Hui↗
DOE OSTI2021

Effect of chemical substituents attached to the zwitterion cation on dielectric constant

Materials with high dielectric constant, ε s , are desirable in a wide range of applications including energy storage and actuators. Recently, zwitterionic liquids have been reported to have the largest ε s of any liquid and, thus, have the potential to replace inorganic fillers to modulate the material ε s . Although the large ε s for zwitterionic liquids is attributed to their large molecular dipole, the role of chemical substituents attached to the zwitterion cation on ε s is not fully understood, which is necessary to enhance the performance of soft energy materials. Here, we report the impact of zwitterionic liquid cation chemical substituents on ε s (50 < ε s < 300 at room temperature). Dielectric relaxation spectroscopy reveals that molecular reorientation is the main contributor to the high ε s . The low Kirkwood factor g calculated for zwitterionic liquids (e.g., 0.1–0.2) suggests the tendency for the antiparallel zwitterion dipole alignment expected from the strong electrostatic intermolecular interactions. With octyl cation substituents, the g is decreased due to the formation of hydrophobic-rich domains that restrict molecular reorientation under applied electric fields. In contrast, when zwitterion cations are functionalized with ethylene oxide (EO) segments, g increases due to the EO segments interacting with the cations, allowing more zwitterion rotation in response to the applied field. The reported results suggest that high ε s zwitterionic liquids require a large molecular dipole, compositionally homogeneous liquids (e.g., no aggregation), a maximized zwitterion number density, and a high g, which is achievable by incorporating polar chemical substituents onto the zwitterion cations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Thermal conductivity of multilayer polymer-nanocomposite thin films

The development of electrical insulators that are thermally conducting is critical for thermal management applications in many advanced electronics and electrical devices. Here, we synthesized polymer nanocomposite (PNC) films composed of polymers [polyethylenimine, poly(vinylamine), poly(acrylic acid), and poly(ethylene oxide)] and dielectric fillers (montmorillonite clay and hexagonal boron nitride) by layer-by-layer technique. The cross-plane thermal conductivity (k⊥) of the film was measured by the 3ω method. The effect of various factors such as film growth, filler type, filler volume fraction, polymer chemical structures, and temperature on the thermal conductivity is reported. The k⊥ of PNCs with thickness from 37 nm to 1.34 μm was found to be in the range of 0.11 to 0.21 ± 0.02 W m−1 K−1. The k⊥ values were found to be lower than the constituent polymer matrix. The experimental result is compared with existing theoretical models of nanocomposite systems to get insight into heat transfer behavior in such layered films composed of dielectrics and polymers.

Physics↗
DOE OSTI2025

Solvation governs cation transference in glyme-based lithium battery electrolytes

The efficacy of electrochemical systems is governed by the cation transference number, which represents the fraction of current carried by the working ion. Energy is wasted when field-induced motion also drives anions and solvent molecules, decreasing the transference number to near-zero. We present a systematic study of cation transference in a series of electrolytes: tetraglyme (TG), octaglyme (OG), and poly(ethylene oxide) (PEO) mixed with lithium bis(trifluoromethanesulfonyl)imide. In all three electrolytes, starting from the dilute salt concentration limit, the experimentally measured cation transference number decreases with increasing concentration, reaching a minimum between -0.1 and -0.2, before rising back to positive values. Explicit measurements of field-induced species' velocities by electrophoretic nuclear magnetic resonance indicate that negative cation transference numbers in TG and OG electrolytes are dictated by solvation interactions with minimal contribution from anion-cation interactions. Simulation-based solvation structures indicate that OG serves as a bridge between TG and PEO. Multi-charge positive clusters, which are negligible in TG, become increasingly important at higher chain lengths (OG and PEO). As migrating cations drag their solvation shells, this solvation-induced motion is amplified in glyme electrolytes because of covalent interactions between solvating glyme molecules and free glyme molecules.

Im, Julia↗
DOE OSTI2025

Minimal implicit-solvent coarse-grained simulation of Pluronic block copolymers with ionic liquids

Pluronic block copolymers, composed of poly(ethylene oxide) (PEO) and poly(propylene oxide) (PPO) in a triblock structure (PEO–PPO–PEO), are well known for their amphiphilic character and ability to self‐assemble into micelles in aqueous solution. The addition of ionic liquids (ILs) can further modulate the core–shell structures of these copolymers, influencing their stability, critical micellization temperature, and size. However, fully atomistic simulations often become prohibitively expensive due to the size and complexity of these systems. In this work, coarse‐grained simulations using a minimal implicit‐solvent model were performed to examine how two classes of ILs, namely, 1‐alkyl‐3‐methylimidazolium ([C n C 1 im]) and 1‐alkyl‐3‐methylpyrrolidinium ([C n C 1 pyrr]), change the micellization of Pluronic block copolymers in aqueous solution. The effects of IL concentration and alkyl group length were investigated, and the model greatly improved the efficiency of simulating large‐scale micelle systems. Furthermore, the numerical simulations are qualitatively compared with experimental investigations. Our results show that adding ILs expands the micelle core by embedding IL tails among the PPO blocks, thereby increasing overall micelle size. Less polar ILs generally induce more pronounced micellar growth. However, the effect of IL tail length on conformation and micellar packing is non‐monotonic. Up to moderate chain lengths (around C8–C10), the IL tails can extend sufficiently to increase local separation within the micelle; at longer tail lengths, enhanced hydrophobic clustering and steric hindrance cause the tails to bend or fold, capping further expansion. In addition, although block copolymer chains tend to pack more closely in the presence of longer‐tailed ILs, the random coil size of an individual polymer chain does not necessarily shrink. Meanwhile, these insights provide a deeper understanding of how Pluronic/IL systems interact, informing applications in drug delivery, cosmetics, food, and environmental engineering. Finally, our minimal implicit‐solvent model can be applied to larger systems and longer timescales, substantially reducing computational cost while reproducing key structural trends observed experimentally.

Atomistic simulations↗
DOE OSTI2025

Key Factors in Semi-Generic Coarse-Grained Modeling of Solid Polymer Electrolytes

Given the long length and time scales of interest and strong interactions present in solid polymer electrolytes, coarse-grained molecular models can be useful in understanding the molecular basis of their structure and transport properties. Rather than representing atoms individually, coarse-grained models use beads representing groups of atoms, making the system simpler and more efficient. Generic coarse-grained models, that are not built based on matching a particular atomistic system, can provide insight into the important physical considerations that apply across different chemical systems, though it can be unclear how to best match to experimental systems and capture relevant experimental behaviors with as simple of a model as possible. Here, we build on generic bead-spring models, but use stiff angle potentials, set different bead properties for different polymer types, and include additional ion parameters, creating a semi-generic coarse-grained model that can map more specifically to polymers and copolymers with different chain architectures, component glass transition temperatures, and ion solvation behaviors. We set most parameters with basic homopolymer data such as glass transition temperatures, Kuhn length, density, and dielectric constant, with further adjustment based on data from the polymer electrolyte system. We specifically model polystyrene-block-poly(oligo-oxyethylene methyl ether methacrylate) (PS-b-POEM) with lithium triflate salt, considering the POEM to be made of a poly(methylmethacrylate) backbone with poly(ethylene oxide) side chains. Solvation of ions is accounted for by additional polymer-ion interactions of the form -S/r4, plus additional lithium-polymer Lennard-Jones interactions. We find these potentials have different effects and discuss strategies for setting these parameters.

Zhang, Yuanhao↗
DOE OSTI2021

Spatiotemporal mapping of mesoscopic liquid dynamics

The study of liquid dynamics at mesoscopic scales is still strewn with difficulty due to limitations in theory and experiment. Historically, significant attention has been given to the analysis of space-time correlation functions and their frequency-Fourier transforms at a few discrete wave numbers. The massive computing power afforded by modern high performance computing clusters and the advent of a wide-angle neutron spin-echo spectrometer, however, have unlocked a more intuitive and fruitful approach to this problem. Using molecular dynamics simulations, here we demonstrate the benefits of spatiotemporally mapping intermediate scattering functions on a dense grid of correlation times and wave numbers. Four model systems are investigated: a Lennard-Jones liquid, a coarse-grained bead-spring polymer, a molten sodium chloride, and a poly(ethylene oxide) melt. We show that the spatiotemporal mapping approach is particularly useful for elucidating the mesoscopic dynamics in these liquids, where several underlying mechanisms, such as molecular relaxations, hydrodynamic modes, and nonhydrodynamic excitations, are potentially at play. Therefore, compared to the traditional method, direct visualization of density space-time correlation functions on two-dimensional color maps permits appraisals of complicated dynamical behavior at mesoscales in a global manner. For example, the scaling relations between space and time for different types of molecular motions can be straightforwardly identified on these plots, without any model-dependent analysis. Additionally, we show how theoretical ideas regarding collective mesoscopic dynamics, such as the classical hydrodynamic theory, the convolution approximation, and a recently proposed phenomenological model, can be discussed in terms of the global features of spatiotemporal maps of intermediate scattering functions. The new perspective offered by the spatiotemporal mapping method should prove useful for the study of liquid dynamics in general.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2026

Two-population Rouse models for polymer segmental dynamics in nanocomposites

Segmental dynamics of polymer chains in a model nanocomposite of poly(ethylene oxide) and silica nanoparticles (NPs) was investigated using quasielastic neutron scattering. The dynamics can be accurately described with the Rouse model. The bulklike polymer far from the NP surface behaves as the neat polymer. However, the slower polymer in the interface close to the NP surface is described either with a second Rouse population with different relaxation time or using the suppressed Rouse model. These simple two-population models accurately reproduce the experimental data, with the suppressed Rouse model describing topological constraints, on average, every 12 beads with an interfacial thickness up to 13.5 beads, and the effect of the interface extending to a layer of thickness comparable to the end-to-end distance of the polymer. This modeling provides an explanation for the observed reinforcement in PNC even at low loadings, consistent with current understanding of the relevance of the interphase.

Composite materials↗
DOE OSTI2026

Observation of N-rich solid-electrolyte interphase by ToF-SIMS.

Formation of a stable solid electrolyte interphase (SEI) between lithium electrodes and electrolyte upon multiple charge/discharge cycles is crucial to a long-term lithium-ion battery performance. Addition of LiNO3 to lithium bis (fluorosulfonyl) imide/poly(ethylene oxide) (LiFSI/PEO) electrolyte leads to a durable SEI that is electrically insulating yet highly conductive to Li ions, chemically and electrochemically stable, physically uniform, and mechanically robust. ToF-SIMS was used here in combination with sputtering by a gaseous cluster ion beam (GCIB) to examine how the addition of a small proportion of LiNO3 to the LiFSI/PEO electrolyte affects the SEI composition. Negative ion ToF-SIMS spectra of the cycled samples display an intense m/z 26 peak associated with the SEI. Exact mass assignments and isotopic ratios indicate that this peak should be assigned as (CN-)-C-12, with little to no negative secondary ion signal arising from (LiF-)-Li-7. This CN- signal appears to arise from an N-rich portion of the SEI adjacent to the Li electrode that is depleted in LiF relative to the bulk electrolyte. The dearth of LiF- (and LiF+ from the positive ion spectra) is unexpected because LiF has been identified in the SEI in similar samples. Finally, GCIB sputtering indicates that the SEI adheres more strongly to the Li electrode than to the LiFSI/PEO electrolyte.

Shavandi, Seyedeh Reyhaneh↗