Search NASA⌕ Search

SEARCH · Search NASA

Results for “hybrid functional”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Carbon complexes in highly C-doped GaN

We investigate the properties of heavily C-doped GaN grown by hydride vapor phase epitaxy using both optical experiments and hybrid density functional theory calculations. Previous work has established that carbon acceptors (C N ) give rise to a yellow luminescence band near 2.2 eV along with a blue luminescence band near 2.9 eV. Photoluminescence measurements show the yellow band shifting as a function of carbon concentration, suggesting a change in the behavior of carbon species as carbon content increases. With hybrid density functional theory we calculate the electrical and optical behavior of carbon centers containing multiple carbon impurities, which may arise in heavily doped material. We compare the behavior of these complexes to the isolated centers, and find that the dicarbon donor-acceptor (C Ga –C N ) complex is a candidate to explain the shift in the yellow luminescence peak. Tricarbon complexes have high formation energies and modest binding energies, and also give rise to optical transitions that are inconsistent with the observed spectra. We also identify the split dicarbon interstitial on the gallium site as a low-energy species with a large binding energy that may act to compensate carbon acceptors. Here, local vibrational modes are calculated for carbon impurity centers, and we compare these results to recent experiments. Dicarbon and tricarbon complexes involving C Ga and C N exhibit modes that are only slightly higher than the isolated species, while carbon interstitials and related complexes give rise to vibrational modes much higher than C Ga and C N .

36 MATERIALS SCIENCE↗
DOE OSTI2024

Evaluating the Chemical Reactivity of DFT-Simulated Liquid Water with Hydrated Electrons via the Dual Descriptor

Modeling the various properties of liquid water, particularly its reactivity, has been a longstanding challenge for simulation methods. Recently, ab initio simulations based on density functional theory (DFT) have come to the fore as tenable methods for calculating the properties and reactivity of water, with varying degrees of success for different exchange-correlation functionals. In particular, hybrid-GGA and meta-GGA functionals have been shown to reproduce many of the structural, dynamical, and energetic properties of water to a high degree of accuracy relative to their computational cost. Here, we show that the dual descriptor (DD) measure of nucleophilicity and electrophilicity, which is sometimes used to elucidate organic chemistry reaction mechanisms, can also be used to characterize the reactivity of DFTsimulated liquid water. The DD is especially apt for understanding the reactivity of excess electrons with water as its calculation explicitly involves adding and removing an excess electron from a reference system. We use the DD to explore the reactivity of water simulated using three different DFT functionals: the LDA functional (LDA), a hybrid-GGA functional (PBE0), and a hybrid meta- GGA functional (SCAN0). Using the DD, we show that the SCAN0 functional with the standard 25% Hartree–Fock exchange produces simulated liquid water with many regions that are far more reactive than either PBE0 or LDA. To understand the implications of these highly reactive regions, we then add a strong nucleophile in the form of an excess electron and find that although PBE0 and LDA predict stable hydrated electrons, the excess electron reacts nearly instantaneously with SCAN0 water via proton abstraction to form a hydrogen atom and hydroxide ion. We show that the DD provides the ability to not only predict whether or not liquid water will react with a hydrated electron but also which particular waters will be involved solely from analyzing pure water configurations generated with each functional. We rationalize this result in terms of the known trap-seeking behavior of injected hydrated electrons, which are able to find the most electronegative region in bulk water. These results highlight the utility of the dual descriptor as a fast and interpretable method for investigating condensed-phase reactivity with excess electrons.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Analysis of defects in In 2 O 3 :H synthesized in presence of water vapor and hydrogen gas mixture

Using hybrid functional-based density functional theory calculations, we analyze the structure and kinetics of defects formed in two competing synthesis routes to prepare hydrogen-doped In 2 O 3 films, using a hydrogen and oxygen gas mixture vs synthesis in the presence of water vapor. For both of these synthesis routes, we find that H + is the dominant defect species: when the Fermi level is close to the conduction band, H + has a lower formation energy than other intrinsic or extrinsic defects. Our results also suggest that water molecules spontaneously split into H + (which occupies octahedral voids) and OH – interstitials (which occupies vacant oxygen lattice sites or oxygen vacancies). From the analysis of the binding energies between these different defects, we conclude that these defects do not cluster and are most likely to stay spatially distributed throughout the films. In addition, the sum of formation energies of an oxygen (i.e., O$^{2–}_i$) and a H + interstitial is close to the formation energy of a OH – interstitial, meaning that water molecules are completely split into 2H + and O$^{2–}_i$ at the synthesis conditions. Further, in the presence of H 2 + O 2 gas mixture, oxygen interstitials occupy oxygen vacancies while hydrogen interstitials occupy vacant oxygen lattice sites and form bonds with lattice oxygens. Our analysis of the defect equilibria suggests that the hydrogen content in films synthesized in the presence of water vapor is higher than films synthesized in the presence of a hydrogen gas mixture. At high dopant concentrations, a hydrogen bond network is formed in the system and this leads to large distortions in the lattice.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS2010

Analysis of Different Cost Functions in the Geosect Airspace Partitioning Tool

A new cost function representing air traffic controller workload is implemented in the Geosect airspace partitioning tool. Geosect currently uses a combination of aircraft count and dwell time to select optimal airspace partitions that balance controller workload. This is referred to as the aircraft count/dwell time hybrid cost function. The new cost function is based on Simplified Dynamic Density, a measure of different aspects of air traffic controller workload. Three sectorizations are compared. These are the current sectorization, Geosect's sectorization based on the aircraft count/dwell time hybrid cost function, and Geosect s sectorization based on the Simplified Dynamic Density cost function. Each sectorization is evaluated for maximum and average workload along with workload balance using the Simplified Dynamic Density as the workload measure. In addition, the Airspace Concept Evaluation System, a nationwide air traffic simulator, is used to determine the capacity and delay incurred by each sectorization. The sectorization resulting from the Simplified Dynamic Density cost function had a lower maximum workload measure than the other sectorizations, and the sectorization based on the combination of aircraft count and dwell time did a better job of balancing workload and balancing capacity. However, the current sectorization had the lowest average workload, highest sector capacity, and the least system delay.

Wong, Gregory L.↗
DOE OSTI2021

Making the most of your electrons: Challenges and opportunities in characterizing hybrid interfaces with STEM

Inspired by the unique architectures composed of hard and soft materials in natural and biological systems, synthetic hybrid structures and associated hard-soft interfaces have recently evoked significant interest. Soft matter is typically dominated by structural fluctuations even at room temperature, while hard matter is governed by rigid mechanical behavior. This dichotomy offers considerable opportunities to leverage the disparate properties offered by these components across a wide spectrum spanning from basic science to engineering insights with significant technological overtones. Such hybrid structures, which include polymer nanocomposites, DNA functionalized nanoparticle superlattices, and metal organic frameworks to name a few, have delivered promising insights into the technologically relevant applications such as catalysis, environmental remediation, optoelectronics, and medicine. The interfacial structure between the hard and soft phases demonstrates features across a variety of length scales and often strongly influence the functionality of hybrid systems. While scanning/transmission electron microscopy (S/TEM) has proven to be a valuable tool for acquiring intricate molecular and nanoscale details of these interfaces, the unusual nature of hybrid composites presents a suite of challenges that make assessing or establishing structure–property relationships especially difficult. There are additional considerations at all stages of sample analysis from preparing electron-transparent samples to obtaining sufficient contrast to resolve the interface between dissimilar materials given the dose sensitivity of soft materials. Here, we discuss each of these challenges and supplement a review of recent developments in the field with additional experimental investigations and simulations to present solutions for attaining a nano or molecular-level understanding of these interfaces. These solutions present a host of opportunities for investigating the role interfaces play in this unique class of functional materials.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Distributed memory, GPU accelerated Fock construction for hybrid, Gaussian basis density functional theory

With the growing reliance of modern supercomputers on accelerator-based architecture such a graphics processing units (GPUs), the development and optimization of electronic structure methods to exploit these massively parallel resources has become a recent priority. While significant strides have been made in the development GPU accelerated, distributed memory algorithms for many modern electronic structure methods, the primary focus of GPU development for Gaussian basis atomic orbital methods has been for shared memory systems with only a handful of examples pursing massive parallelism. Here in this work, we present a set of distributed memory algorithms for the evaluation of the Coulomb and exact exchange matrices for hybrid Kohn–Sham DFT with Gaussian basis sets via direct density-fitted (DF-J-Engine) and seminumerical (sn-K) methods, respectively. The absolute performance and strong scalability of the developed methods are demonstrated on systems ranging from a few hundred to over one thousand atoms using up to 128 NVIDIA A100 GPUs on the Perlmutter supercomputer.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2021

Photoelectron spectra of early 3 d -transition metal dioxide molecular anions from GW calculations

Photoelectron spectra of early 3 d -transition metal dioxide anions, Sc O 2 - , Ti O 2 - , V O 2 - , Cr O 2 - , and Mn O 2 - , are calculated using semilocal and hybrid density functional theory (DFT) and many-body perturbation theory within the GW approximation using one-shot perturbative and eigenvalue self-consistent formalisms. Different levels of theory are compared with each other and with available photoelectron spectra. We show that one-shot GW with a PBE0 starting point ( G 0 W 0 @PBE0) consistently provides very good agreement for all experimentally measured binding energies (within 0.1 eV–0.2 eV or less). We attribute this to the success of PBE0 in mitigating self-interaction error and providing good quasiparticle wave functions, which renders a first-order perturbative GW correction effective. One-shot GW calculations with a Perdew–Burke–Ernzerhof (PBE) starting point do poorly in predicting electron removal energies by underbinding orbitals with typical errors near 1.5 eV. A higher exact exchange amount of 50% in the DFT starting point of one-shot GW does not provide very good agreement with experiment by overbinding orbitals with typical errors near 0.5 eV. While not as accurate as G 0 W 0 @PBE0, the G -only eigenvalue self-consistent GW scheme with W fixed to the PBE level provides a reasonably predictive level of theory (typical errors near 0.3 eV) to describe photoelectron spectra of these 3 d -transition metal dioxide anions. Adding eigenvalue self-consistency also in W , on the other hand, worsens the agreement with experiment overall. Overall, our findings on the performance of various GW methods are discussed in the context of our previous studies on other transition metal oxide molecular systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Electronic properties of corundum-like Ir 2 O 3 and Ir 2 O 3 -Ga 2 O 3 alloys

In the hexagonal, corundum-like structure, α-Ga 2 O 3 has a bandgap of ~5.1 eV, which, combined with its relatively small electron effective mass, high Baliga's figure of merit, and high breakdown field, makes it a promising candidate for power electronics. Ga 2 O 3 is easy to dope n-type, but impossible to dope p-type, impeding the realization of some electronic device designs. Developing a lattice-matched p-type material that forms a high-quality heterojunction with n-type Ga 2 O 3 would open new opportunities in electronics and perhaps optoelectronic devices. In this work, we studied Ir 2 O 3 as a candidate for that purpose. Using hybrid density functional theory calculations we predict the electronic band structure of α-Ir 2 O 3 and compare that to α-Ga 2 O 3 , and study the stability and electronic properties of α-(Ir x Ga 1–x ) 2 O 3 alloys. We discuss the band offset between the two materials and compare it with recently available experimental data. We find that the Ir d bands that compose the top of the valence band in α-Ir 2 O 3 are much higher in energy than O p bands in α-Ga 2 O 3 , possibly enabling effective p-type doping. Finally, our results provide an insight into using the Ir 2 O 3 or Ir 2 O 3 -Ga 2 O 3 alloys as p-type material lattice-matched to α-Ga 2 O 3 for the realization of p–n heterojunctions.

36 MATERIALS SCIENCE↗
NASA NTRS1992

A practical low-boom overpressure signature based on minimum sonic boom theory

A brief resume of sonic boom minimization methods is given to provide a background for a new, empirical modification of the Seebass and George minimum-nose-shock sonic boom F-function and signature. The new 'hybrid' F-function has all the inherent flexibility of application found with the Darden-modified Seebass and George F-function. In addition, it has enhanced this flexibility and applicability with neglegible increase in nose and/or tail shock strength. A description of this 'hybrid' F-function and signature is provided, and the benefits of using them to design high-performance, low-boom aircraft are discussed.

Mack, Robert J.↗
DOE OSTI2025

Optical properties of vacancies in aluminum oxide (𝛼−Al 2 ⁢O 3 ) from first principles

We employ first-principles calculations based on hybrid density functional theory to investigate the structural and optical properties of the oxygen vacancy (𝑉 O ) and aluminum vacancy (𝑉 Al ) in 𝛼−Al 2 ⁢O 3 , the most stable (corundum) phase of alumina. Our calculations facilitate the identification of experimental excitation and luminescence spectra with specific electronic transitions at the vacancy sites. The absorption line shape for excitation of an electron at 𝑉$^0_O$ to the conduction-band minimum (CBM) is in excellent agreement with the 6.1 eV band detected by optical absorption spectroscopy, and we find that the 5.9 eV absorption band is generated by an internal electron transition at 𝑉$^0_O$. We confirm that the slowly decaying 3.0 eV emission band of the 𝐹 center is due to a triplet-singlet transition at 𝑉$^0_O$. Our calculations also reveal that the 4.8 eV/5.4 eV absorption and 3.8 eV emission bands assigned to the 𝐹 + center are generated by internal transitions at 𝑉$^{+1}_O$. The line shape for the excitation of an electron from 𝑉$^{+1}_O$ to the CBM agrees well with an absorption band at 6.4 eV, while the recombination of an electron with 𝑉$^{+2}_O$ also produces luminescence around 3.8 eV, but with a considerably broader line shape. For Al vacancies, we confirm that the most prevalent configuration in 𝛼−Al 2 ⁢O 3 is a split-vacancy configuration 𝑉 Al,s , and we calculate migration barriers for different directions in the corundum crystal. We predict absorption and emission spectra for the excitation and recombination of an electron localized at 𝑉$^{−3}_{Al}$ and 𝑉$^{−3}_{Al,s}$ sites with the CBM. The line shapes of the two 𝑉 Al configurations overlap and are considerably broader than the spectra corresponding to 𝑉 O .

36 MATERIALS SCIENCE↗
DOE OSTI2025

Biomass-Derived Carbon and Their Composites for Supercapacitor Applications: Sources, Functions, and Mechanisms

Biomass-derived carbons are eco-friendly and sustainable materials, making them ideal for supercapacitors due to their high surface area, excellent conductivity, cost-effectiveness, and environmental benefits. This review provides valuable insights into biomass-derived carbon and modified carbon for supercapacitors, integrating both experimental results and theoretical calculations. This review begins by discussing the origins of biomass-derived carbon in supercapacitors, including plant-based, food waste-derived, animal-origin, and microorganism-generated sources. Then, this review presents strategies to improve the performance of biomass-derived carbon in supercapacitors, including heteroatom doping, surface functionalization, and hybrid composite construction. Furthermore, this review analyzes the functions of biomass-derived carbon in supercapacitors both in its pure form and as modified materials. The review also explores composites derived from biomass-based carbon, including carbon/MXenes, carbon/MOFs, carbon/graphene, carbon/conductive polymers, carbon/transition metal oxides, and carbon/hydroxides, providing a thorough investigation. Most importantly, this review offers an innovative summary and analysis of the role of biomass-derived carbon in supercapacitors through theoretical calculations, concentrating on four key aspects: energy band structure, density of states, electron cloud density, and adsorption energy. Finally, the review concludes the future research directions for biomass carbon-based supercapacitors, including the discovery of novel biomass materials, tailoring surface functional groups, fabricating high-performance composite materials, exploring ion transfer mechanisms, and enhancing practical applications. In summary, this review offers a thorough exploration of the sources, functions, and mechanisms of biomass-derived carbon in supercapacitors, providing valuable insights for future research.

biomass-derived carbon↗
DOE OSTI2021

Reconfiguration of Amorphous Complex Oxides: A Route to a Broad Range of Assembly Phenomena, Hybrid Materials, and Novel Functionalities

This work demonstrate that reconfiguration of amorphous oxide layers drives the assembly of oxide-based and freestanding nanomembranes into 3D structures with a radius of a few hundred nanometers. Reconfiguration-driven assembly is a versatile approach to impart large strains and strain gradients in a broad palette of complex oxides. This capability allows for manipulating and enhancing ferroelectricity, flexoelectricity, piezoelectricity, superconductivity, and ferromagnetism in complex oxides. Moreover, by the approach presented in this work, strain-engineered oxides are obtained in the form of 3D structures that can be fabricated in parallel on any substrate, including large-area and single crystalline semiconductor substrates. This approach will create a vast expanse of possibilities to investigate and leverage strain-tunable effects in amorphous, poly-crystalline, and single-crystalline complex oxides. Reconfiguration-driven assembly of NMs also allows combining different materials in a radial geometry and through scalable processes. For example, radial superlattices of Si (or GaAs) and various complex oxides or alternating layers of different complex oxides (e.g., SrTiO 3 and LaAlO 3 ) could be fabricated by release and heating of bilayer NMs. Here, a broad palette of electronic band structures and spin–orbit interactions could then be obtained by tailoring the curvature of the self-assembled NMs and the materials that the heterostructure comprises.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2022

Surface Immobilization of a Re(I) Tricarbonyl Phenanthroline Complex to Si(111) through Sonochemical Hydrosilylation

A sonochemical-based hydrosilylation method was employed to covalently attach a rhenium tricarbonyl phenanthroline complex to silicon(111). fac-Re(5-(p-Styrene)-phen)(CO) 3 Cl (5-(p-styrene)-phen = 5-(4-vinylphenyl)-1,10-phenanthroline) was reacted with hydrogen-terminated silicon(111) in an ultrasonic bath to generate a hybrid photoelectrode. Subsequent reaction with 1-hexene enabled functionalization of remaining atop Si sites. Attenuated total reflectance–Fourier transform infrared spectroscopy confirms attachment of the organometallic complex to silicon without degradation of the organometallic core, supporting hydrosilylation as a strategy for installing coordination complexes that retain their molecular integrity. Detection of Re(I) and nitrogen by X-ray photoelectron spectroscopy (XPS) further support immobilization of fac-Re(5-(p-styrene)-phen)(CO) 3 Cl. Cyclic voltammetry and electrochemical impedance spectroscopy under white light illumination indicate that fac-Re(5-(p-styrene)-phen)(CO) 3 Cl undergoes two electron reductions. Mott–Schottky analysis indicates that the flat band potential is 239 mV more positive for p-Si(111) co-functionalized with both fac-Re(5-(p-styrene)-phen)(CO) 3 Cl and 1-hexene than when functionalized with 1-hexene alone. XPS, ultraviolet photoelectron spectroscopy, and Mott–Schottky analysis show that functionalization with fac-Re(5-(p-styrene)-phen)(CO) 3 Cl and 1-hexene introduces a negative interfacial dipole, facilitating reductive photoelectrochemistry.

X-ray photoelectron spectroscopy↗
DOE OSTI2019

Quasicubic model for metal halide perovskite nanocrystals

In this work, we present an analysis of quantum confinement of carriers and excitons, and exciton fine structure, in metal halide perovskite (MHP) nanocrystals (NCs). Starting with coupled-band k · P theory, we derive a nonparabolic effective mass model for the exciton energies in MHP NCs valid for the full size range from the strong to the weak confinement limits. We illustrate the application of the model to CsPbBr 3 NCs and compare the theory against published absorption data, finding excellent agreement. We then apply the theory of electron-hole exchange, including both short- and long-range exchange interactions, to develop a model for the exciton fine structure. We develop an analytical quasicubic model for the effect of tetragonal and orthorhombic lattice distortions on the exchange-related exciton fine structure in CsPbBr 3 , as well as some hybrid organic MHPs of recent interest, including formamidinium lead bromide (FAPbBr 3 ) and methylammonium lead iodide (MAPbI3). Testing the predictions of the quasicubic model using hybrid density functional theory (DFT) calculations, we find qualitative agreement in tetragonal MHPs but significant disagreement in the orthorhombic modifications. Moreover, the quasicubic model fails to correctly describe the exciton oscillator strength and with it the long-range exchange corrections in these systems. Introducing the effect of NC shape anisotropy and possible Rashba terms into the model, we illustrate the calculation of the exciton fine structure in CsPbBr 3 NCs based on the results of the DFT calculations and examine the effect of Rashba terms and shape anisotropy on the calculated fine structure.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Comparative study of Minnesota functionals performance on ferroelectric BaTiO 3 and PbTiO 3

Density functional theory based simulations are the leading tool for the computational investigation of ferroelectrics and the parametrization of their classical potentials. However, the predictions often depend strongly on the exchange correlation functional. The most popular choices, LDA and GGA, tend to underestimate or overestimate some structural, electric, and energy properties. These impede development of highly accurate classical potentials that extend the reach of first-principles simulations to finite temperatures and realistic sizes. In this work, we investigate the performance of recently developed Minnesota exchange correlation functionals on prototypical ferroelectrics BaTiO 3 , and PbTiO 3 , in comparison with some popular ones. We find that there exists strong correlation between predictions for some properties (tetragonality, phase energy difference, and polarization) by different functionals. Along the correlation line, we find a range of functionals (including some from the Minnesota suite) whose predictions fall in between those of LDA and GGA and, therefore, offer an improvement. A way to relatively rank functional performance with respect to chosen benchmarks is proposed and applied to identify the top performers for BaTiO 3 and PbTiO 3 . Here, the performance is found to be material dependent. Therefore, we propose that the performance assessment carried out in this work is employed to "screen" functionals prior to their use on ferroelectrics. Quick and computationally inexpensive, it is likely to lead to improved descriptions, especially for classical potential parametrization. The Minnesota functional suite is found to be suitable for this task.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Benchmarking Density Functional Theory Methods for Efficient Calculations of a Strongly Correlated Li 1– x Ni 1– y O 2−δ System

Transition metal oxides (TMOs), such as LiNiO 2 , are promising candidates for energy storage and electronic devices due to their unique electronic properties, exceptional physical and chemical characteristics, and ability to adopt multiple oxidation states. However, accurately predicting their properties using mean-field density functional theory (DFT) is challenging due to the presence of strongly correlated d-electrons and the complex interplay between their structural, electronic, and magnetic responses. These challenges are further exacerbated by the need to model defects, surfaces, and interfaces, which require computationally efficient, large-scale simulations. To address these issues, we carry out a benchmark study on the Li 1–x NiO 2 system, evaluating the performance of several popular functionals. Our findings demonstrate that combining SCAN functional relaxation with single-step HSE calculations provides a practical and scalable computational strategy. This approach balances accuracy and efficiency, enabling high-throughput simulations of strongly correlated TMOs and improved predictive modeling capability of TMOs for practical applications.

25 ENERGY STORAGE↗
DOE OSTI2023

Even Faster Exact Exchange for Solids via Tensor Hypercontraction

Hybrid density functional theory (DFT) remains intractable for large periodic systems due to the demanding computational cost of exact exchange. We apply the tensor hypercontraction (THC) (or interpolative separable density fitting) approximation to periodic hybrid DFT calculations with Gaussian-type orbitals using the Gaussian plane wave approach. This is done to lower the computational scaling with respect to the number of basis functions (N) and k-points (N k ) at a fixed system size. Additionally, we propose an algorithm to fit only occupied orbital products via THC (i.e., a set of points, N ISDF ) to further reduce computation time and memory usage. This algorithm has linear scaling cost with k-points, no explicit dependence of N ISDF on basis set size, and overall cubic scaling with unit cell size. Significant speedups and reduced memory usage may be obtained for moderately sized k-point meshes, with additional gains for large k-point meshes. Adequate accuracy can be obtained using THC-oo-K for self-consistent calculations. In conclusion, we perform illustrative hybrid density function theory calculations on the benzene crystal in the basis set and thermodynamic limits to highlight the utility of this algorithm.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗