SEARCH · Search NASA

Results for “multiple scattering effects”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12

All sources NASA NTRS DOE OSTI

NASA NTRS2002

Investigation of Venus Surface Properties

Strong localized radar echoes have been observed at decimeter wavelengths from the highlands of Venus since the earliest radar maps were obtained over 30 years ago. These echoes are some five to ten times stronger than those from the presumably basaltic rocks seen at lower altitudes elsewhere on Venus. Observations of thermal emission from the visible disk of Venus at wavelengths corresponding to those used in the radar mapping confirm that the regions of high reflectivity also exhibit low emissivity, as expected from considerations of detailed thermodynamic balance. Two possibilities have been put forward to explain this unexpected aspect of the Venus highlands: 1) surface materials of high effective dielectric constant, probably associated with finite electrical conductivity, and 2) volume scattering associated with multiple scattering from a layer of very-low-loss material containing voids and extending down a few hundred wavelengths beneath the surface. Analogs to these two mechanisms are found elsewhere in the solar system, and each is capable of explaining the basic observations. as of the early 1990's. In 1993, however, it became possible to carry out a bistatic observation of the anomalous highland regions using the Magellan spacecraft, then in orbit about Venus. In this experiment the on-board telemetry transmitter was aimed at the planet's surface with its linear S-band polarization vector oriented at 45 deg to the spacecraft-Venus-Earth scattering plane. The pointing of the transmitting antenna was adjusted so that the spacecraft-to-illuminated-surface incidence angle equalled the Earth-to-Venus-surface incidence angle. In this way, the experiment emphasized the specular scattering component. A full Stokes-Vector analysis of the reflected signal as received on Earth was carried out as the illuminated region scanned across the highland regions of Venus. From the observed position angle of the echo, it was possible to calculate the Fresnel reflectivity of a number of regions on Venus, including the high-altitude Maxwell Montes, and to show unequivocally that the complex dielectric constant of that anomalous area was 100 +/- 50i, as compared to 4.0 (real) for the typical lowland area. Thus this experiment was able to rule out definitively an hypothesis of volume scattering as the explanation for the anomalous scattering in the Venus highlands.

Ford, Peter G.↗

NASA NTRS1979

Extensions to the classical calculation of the effect of mutual shadowing in diffuse reflection

The classical method for accounting for the mutual shadowing among closely packed particles in multiple scattering calculations is extended in the following ways. (1) By modeling the particle distribution by a Poisson process with a varying density parameter, a 'Van der Waals' type approximation allows extension to a greater fractional volume density, D. In this case it is only required that D squared be much less than 1 instead of D being much less than 1. (2) In the case that the particle distribution is not uniform the classical calculation may be weighted by the pair correlation function of the distribution. (3) The use of the Markov chain formalism for radiative transfer allows inclusion of the effect of shadowing for two orders of scattering. For conditions such as might apply in Saturn's rings, the inclusion of this effect makes less than a 0.1% difference in the calculated phase curves, compared to previous calculations which have included shadowing only in the first scattering. The latter are thus shown to be quite accurate.

Esposito, L. W.↗

NASA NTRS2002

Isotopic Effects in Nuclear Fragmentation and GCR Transport Problems

Improving the accuracy of the galactic cosmic ray (GCR) environment and transport models is an important goal in preparing for studies of the projected risks and the efficiency of potential mitigations methods for space exploration. In this paper we consider the effects of the isotopic composition of the primary cosmic rays and the isotopic dependence of nuclear fragmentation cross sections on GCR transport models. Measurements are used to describe the isotopic composition of the GCR including their modulation throughout the solar cycle. The quantum multiple-scattering approach to nuclear fragmentation (QMSFRG) is used as the data base generator in order to accurately describe the odd-even effect in fragment production. Using the Badhwar and O'Neill GCR model, the QMSFRG model and the HZETRN transport code, the effects of the isotopic dependence of the primary GCR composition and on fragment production for transport problems is described for a complete GCR isotopic-grid. The principle finding of this study is that large errors ( 100%) will occur in the mass-flux spectra when comparing the complete isotopic-grid (141 ions) to a reduced isotopic-grid (59 ions), however less significant errors 30%) occur in the elemental-flux spectra. Because the full isotopic-grid is readily handled on small computer work-stations, it is recommended that they be used for future GCR studies.

Cucinotta, Francis A.↗

NASA NTRS1996

Adaptation of the University of Wisconsin High Spectral Resolution Lidar for Polarization and Multiple Scattering Measurements

Quantitative lidar measurements of aerosol scattering are hampered by the need for calibrations and the problem of correcting observed backscatter profiles for the effects of attenuation. The University of Wisconsin High Spectral Resolution Lidar (HSRL) addresses these problems by separating molecular scattering contributions from the aerosol scattering; the molecular scattering is then used as a calibration target that is available at each point in the observed profiles. While the HSRl approach has intrinsic advantages over competing techniques, realization of these advantages requires implementation of a technically demanding system which is potentially very sensitive to changes in temperature and mechanical alignments. This paper describes a new implementation of the HSRL in an instrumented van which allows measurements during field experiments. The HSRL was modified to measure depolarization. In addition, both the signal amplitude and depolarization variations with receiver field of view are simultaneously measured. This allows for discrimination of ice clouds from water clouds and observation of multiple scattering contributions to the lidar return.

Eloranta, E. W.↗

DOE OSTI2025

Correspondence between Color Glass Condensate and High-Twist Formalism

The color glass condensate (CGC) effective theory and the collinear factorization at high twist (HT) are two well-known frameworks describing perturbative QCD multiple scatterings in nuclear media. It has long been recognized that these two formalisms have their own domain of validity in different kinematic regions. Taking direct photon production in proton-nucleus collisions as an example, we clarify for the first time the relation between CGC and HT at the level of a physical observable. We show that the CGC formalism beyond shock-wave approximation, and with the Landau-Pomeranchuk-Migdal interference effect is consistent with the HT formalism in the transition region where they overlap. Such a unified picture paves the way for mapping out the phase diagram of parton density in nuclear medium from dilute to dense region.

Parton distribution functions↗

DOE OSTI2024

Investigation of the Impact of TSL Data Libraries and Geometry Variations on the MSRE Benchmark

The increasing demand for green, low-carbon energy solutions has amplified the focus on advanced nuclear reactor technologies. Among these, Molten Salt Reactors (MSRs) have been spotlighted because of their special features. Historically, Oak Ridge National Laboratory (ORNL) started the Molten Salt Reactor Experiment (MSRE) in 1956. Later, ORNL and the University of California, Berkeley (UCB) jointly developed the MSRE benchmark. This was then reviewed by the International Reactor Physics Experiment Evaluation Project (IRPhEP) committee and added to their 2019 handbook. In the current study, the benchmark model was recreated via the Serpent code. The calculated effective multiplication factor was 1.02087 ± 0.00019, which gives a deviation of about 2000 pcm compared to the benchmark/experimental result. At North Carolina State University (NCSU), recent evaluations were conducted on thermal scattering cross sections for molten salt FLiBe and 20% porous nuclear graphite, anticipated for incorporation in the ENDF/B-VIII.1 library. The influences of these thermal scattering law (TSL) data and geometry changes on the multiplication factor were examined using the ENDF/B-VII.1 and ENDF/B-VIII.0 libraries. Introducing the TSL data for FLiBe and 20% porous graphite resulted in an effective multiplication factor of +270 pcm compared to the reference value obtained with ENDF/B-VII.1 in this study. The adjustment of the reactor vessel dimensions resulted in decrease of -448 pcm in the calculated effective multiplication factor.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

NASA NTRS1994

Coupled 2-dimensional cascade theory for noise and unsteady aerodynamics of blade row interaction in turbofans. Volume 1: Theory development and parametric studies

Typical analytical models for interaction between rotor and stator in a turbofan analyze the effect of wakes from the rotor impinging on the stator, producing unsteady loading, and thereby generating noise. Reflection/transmission characteristics of the rotor are sometimes added in a separate calculation. In those models, there is a one-to-one relationship between wake harmonics and noise harmonics; that is, the BPF (blade passing frequency) wake harmonic causes only the BPF noise harmonic, etc. This report presents a more complete model in which flow tangency boundary conditions are satisfied on two cascades in relative motion for several harmonics simultaneously. By an extension of S.N. Smith's code for two dimensional flat plate cascades, the noise generation/frequency scattering/blade row reflection problem is solved in a single matrix inversion. It is found that the BPF harmonic excitation of the stator scatters considerable energy in the higher BPF harmonics due to relative motion between the blade rows. Furthermore, when swirl between the rotor and stator is modeled, a 'mode trapping' effect occurs which explains observations on fans operating at rotational speeds below BFP cuton: the BPF mode amplifies between blade rows by multiple reflections but cannot escape to the inlet and exit ducts. However, energy scattered into higher harmonics does propagate and dominates the spectrum at two and three times BPF. This report presents the complete derivation of the theory, comparison with a previous (more limited) coupled rotor/stator interaction theory due to Kaji and Okazaki, exploration of the mode trapping phenomenon, and parametric studies showing the effects of vane/blade ratio and rotor/stator interaction. For generality, the analysis applies to stages where the rotor is either upstream or downstream of the stator and to counter rotation stages. The theory has been coded in a FORTRAN program called CUP2D, documented in Volume 2 of this report. It is concluded that the new features of this analysis - unsteady coupling, frequency scattering, and flow turning between rotor and stator - have a profound effect on noise generation caused by rotor/stator interaction. Treating rotors and stators as isolated cascades is not adequate for noise analysis and prediction.

Hanson, Donald B.↗

NASA NTRS1974

The radiative effect of aerosols in the earth's atmosphere

A modified two-flux approximation is employed to compute the transfer of radiation in a finite, inhomogeneous, turbid atmosphere. A perturbation technique is developed to allow the treatment of nongray gaseous absorption with multiple scattering. The perturbation method, which employs a backscatter factor as a parameter, can be used with anisotropic particle scattering as well as Rayleigh scattering. This method is used to study the effect of aerosols on radiative solar heating and infrared cooling as well as the radiative-convective temperature distribution in the earth's atmosphere. It is found that the effect of aerosols in the infrared cannot be neglected; while in the visible, the effect can be of the same order as that due to absorption by water vapor. For a high surface albedo (greater than 0.30) heating of the earth-atmosphere system results due to the presence of aerosols. The aerosols also reduce the amount of convection needed to maintain a stable atmosphere. For the case of a dense haze a temperature inversion is found to exist close to the ground.

Wang, W.-C.↗

NASA NTRS1988

Atmospheric effect removal from space imagery

A method to derive a ground reflectance scene from space imagery by removing the contribution of atmospheric radiance was developed. The method utilizes a multiple scattering radiative transfer code to model the Earth-atmosphere system and converts the output into a set of quadratic coefficients which best fit the relationships between the upwelling radiance reaching the sensor and the lower boundary conditions of the ground reflectance. Pixel by pixel correction of the atmospheric effects is done by invoking these coefficients. The algorithm was applied to a number of Thematic Mapper and CZCS data to generate interesting ground scenes and was used to simulate space imagery from ground reflectance scenes.

Kim, Hongsuk H.↗

NASA NTRS1995

Systematic effects of randomness in radiative transfer

In this paper, the authors show how the variability of the water content in individual clouds, the complexity of individual cloud structure, and the lateral and vertical heterogeneity of the distribution of individual clouds can produce systematic effects in the inversion of intensity distributions and the inference of source functions and the vertical temperature profile. This is possibly very significant, even in simple applications of radiative transfer theory where multiple scattering is not very important, in light of the randomness in the water vapor content and geometry associated with the microphysics of clouds. A practical procedure is provided to quantify this effect and to obtain, in certain circumstances, an improved estimate of the vertical temperature profile.

Newman, William I.↗

DOE OSTI2021

High Thermoelectric Performance through Crystal Symmetry Enhancement in Triply Doped Diamondoid Compound Cu 2 SnSe 3

The presence of high crystallographic symmetry and nanoscale defects are favorable for thermoelectrics. With proper electronic structures, a highly symmetric crystal tends to possess multiple carrier channels and promote electrical conductivity without sacrificing Seebeck coefficient. In addition, nanoscale defects can effectively scatter acoustic phonons to suppress thermal conductivity. Here, we report that the triple doping of Cu 2 SnSe 3 leads to a high ZT value of 1.6 at 823 K for Cu 1.85 Ag 0.15 (Sn 0.88 Ga 0.1 Na 0.02 )Se 3 , and a decent average ZT (ZT ave ) value of 0.7 is also achieved for Cu 1.85 Ag 0.15 (Sn 0.93 Mg 0.06 Na 0.01 )Se 3 from 475 to 823 K. Our study reveals: (1) Ag doping on Cu sites generates numerous point defects and greatly decreases lattice thermal conductivity. (2) Doping Mg or Ga converts the monoclinic Cu 2 SnSe 3 into a cubic structure. This symmetry enhancing leads to increase in the effective mass from 0.8 m e to 2.6 m e (m e , free electron mass) and the power factor from 4.3 μW/cm –1 K –2 for Cu 2 SnSe 3 to 11.6 μW/cm –1 K –2 . (3) Na doping creates dense dislocation arrays and nanoprecipitates, which strengthens the phonon scattering. (4) Pair distribution function analysis shows localized symmetry breakdwon in the cubic Cu 1.85 Ag 0.15 (Sn 0.88 Ga 0.1 Na 0.02 )Se 3 . Furthermore, the present work provides a standpoint to design promising thermoelectric materials by synergistically manipulating crystal symmetry and nanoscale defects.

36 MATERIALS SCIENCE↗

DOE OSTI2022

Ab initio approaches to high-entropy alloys: a comparison of CPA, SQS, and supercell methods

In this work, we present a comparative study of different modeling approaches to the electronic properties of the Hf 0.05 Nb 0.05 Ta 0.8 Ti 0.05 Zr 0.05 high-entropy alloy. Common to our modeling is the methodology to compute the one-particle Green’s function in the framework of density functional theory. We demonstrate that the special quasi-random structures modeling and the supercell, i.e., the locally self-consistent multiple-scattering methods, provide very similar results for the ground state properties such as the spectral function (density of states) and the equilibrium lattice parameter. To reconcile the multiple-scattering single-site coherent potential approximation with the real space supercell methods, we included the effect of screening of the net charges of the alloy components. Based on the analysis of the total energy and spectral functions computed within the density functional theory, we found no signature for the long-range or local magnetic moments formation in the Hf 0.05 Nb 0.05 Ta 0.8 Ti 0.05 Zr 0.05 high-entropy alloy; instead, we find possible superconductivity below ~9K.

36 MATERIALS SCIENCE↗

DOE OSTI2023

Gate-Tunable Multiband Transport in ZrTe 5 Thin Devices

Interest in ZrTe 5 has been reinvigorated in recent years owing to its potential for hosting versatile topological electronic states and intriguing experimental discoveries. However, the mechanism of many of its unusual transport behaviors remains controversial: for example, the characteristic peak in the temperature-dependent resistivity and the anomalous Hall effect. Here, through employing a clean dry-transfer fabrication method in an inert environment, we successfully obtain high-quality ZrTe 5 thin devices that exhibit clear dual-gate tunability and ambipolar field effects. Such devices allow us to systematically study the resistance peak as well as the Hall effect at various doping densities and temperatures, revealing the contribution from electron–hole asymmetry and multiple-carrier transport. By comparing with theoretical calculations, we suggest a simplified semiclassical two-band model to explain the experimental observations. Finally, our work helps to resolve the longstanding puzzles on ZrTe 5 and could potentially pave the way for realizing novel topological states in the two-dimensional limit.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

NASA NTRS1984

Turbidity very near the critical point of methanol-cyclohexane mixtures

The turbidity of a critical mixture of methanol and cyclohexane has been measured extremely close to the consolute point. The data span the reduced-temperature range between 10 to the -7th and 10 to the -3d, which is two decades closer to Tc than previous measurements. In this temperature range, the turbidity varies approximately as 1nt, as expected from the integrated form for Ornstein-Zernike scattering. A thin cell (200-micron optical path) with a very small volume (0.08 ml) was used to avoid multiple scattering. A carefully controlled temperature history was used to mix the sample and to minimize the effects of critical wetting layers. The data are consistent with a correlation-length amplitude of 3.9 plus or minus 1.0 A, in agreement with the value 3.5 A calculated from two-scale-factor universality and heat-capacity data from the literature.

Kopelman, R. B.↗

NASA NTRS1985

A Monte Carlo reflectance model for soil surfaces with three-dimensional structure

A Monte Carlo soil reflectance model has been developed to study the effect of macroscopic surface irregularities larger than the wavelength of incident flux. The model treats incoherent multiple scattering from Lambertian facets distributed on a periodic surface. Resulting bidirectional reflectance distribution functions are non-Lambertian and compare well with experimental trends reported in the literature. Examples showing the coupling of the Monte Carlo soil model to an adding bidirectional canopy of reflectance model are also given.

Cooper, K. D.↗

NASA NTRS1985

QCD-motivated description of very high energy particle interactions

Cross sections for the production of secondaries with large transverse momentum can become comparable to the total cross section in the TeV energy range. It is argued that the onset of this effect is observed at sub TeV energies via an increase of the rapidity distribution near y = 0, an increase of p sub T with energy and, most directly, via a correlation between p sub T and multiplicity. If indeed scaling violations are associated with the hard scattering of partons, then scaling violations are largely confined to the central region and have little effect on cosmic ray data which are sensitive to the forward fragmentation region.

Gaisser, T. K.↗

NASA NTRS2005

Instrumentation for Sensitive Gas Measurements

An improved instrument for optical absorption spectroscopy utilizes off-axis paths in an optical cavity in order to increase detection sensitivity while suppressing resonance effects. The instrument is well suited for use in either cavity ring-down spectroscopy (CRDS) [in which one pulses an incident light beam and measures the rate of decay of light in the cavity] or integrated cavity output spectroscopy (ICOS) [in which one uses a continuous-wave incident light beam and measures the power of light in the cavity as a function of wavelength]. Typically, in optical absorption spectroscopy, one seeks to measure absorption of a beam of light in a substance (usually a gas or liquid) in a sample cell. In CRDS or ICOS, the sample cell is placed in (or consists of) an optical cavity, so that one can utilize multiple reflections of the beam to increase the effective optical path length through the absorbing substance and thereby increase the sensitivity for measuring absorption. If an absorbing substance is not present in the optical cavity, one can utilize the multiple passes of the light beam to increase the sensitivity for measuring absorption and scattering by components of the optical cavity itself. It is desirable to suppress the effects of resonances in the cavity in order to make the spectral response of the cavity itself as nearly constant as possible over the entire wavelength range of interest. In the present instrument, the desired flattening of the spectral response is accomplished by utilizing an off-axis beam geometry to effectively decrease the frequency interval between longitudinal electromagnetic modes of the cavity, such that the resulting transmission spectrum of the cavity is nearly continuous: in other words, the cavity becomes a broad-band optical device.

OKeefe, Anthony↗

NASA NTRS1972

A simple code for use in shielding and radiation dosage analyses

A simple code for use in analyses of gamma radiation effects in laminated materials is described. Simple and good geometry is assumed so that all multiple collision and scattering events are excluded from consideration. The code is capable of handling laminates up to six layers. However, for laminates of more than six layers, the same code may be used to incorporate two additional layers at a time, making use of punch-tape outputs from previous computation on all preceding layers. Spectrum of attenuated radiation are obtained as both printed output and punch tape output as desired.

Wan, C. C.↗