Search NASA⌕ Search

SEARCH · Search NASA

Results for “pallets”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12

Alternate thermal control coolant fluid investigation for the NASA Space Transportation System

Although Freon 21 has been assumed to be the coolant fluid for both the Space Shuttle Orbiter's primary heat rejection system and Spacelab's pallet heat transport loop, the fluid's supplier has considered stopping its production. This fact, together with the recent determination that maximum allowable toxicity levels must be reduced by a factor of 100, has prompted NASA's present investigation of a Freon 21 replacement which would provide comparable heat transport/rejection capability without requiring the redesign of existing hardware. Systems performance was analytically evaluated for many fluids, together with tests establishing material compatibility with alternate fluids and the character of any synergistic effects. Test results have indicated that Freon 114 is a viable alternative for some of the systems in question.

Hueter, U.↗

Studies of beam plasma interactions in a space simulation chamber using prototype Space Shuttle instruments

In March, 1981, electron beam experiments were conducted in a large space simulation chamber using equipment destined to be flown aboard NASA's Office of Space Science-1 pallet (OSS-1). Two major flight experiments were involved. They include the Vehicle Charging and Potential (VCAP) experiment and the Plasma Diagnostics Package (PDP). Apparatus connected with VCAP included a Fast Pulse Electron Gun (FPEG), and a Charge and Current Probe (CCP). A preliminary view is provided of the results obtained when the electron emissions were held steady over relatively long periods of time such that steady state conditions could be obtained with respect to the electron beam interaction with the neutral gases and plasma of the vacuum chamber. Of particular interest was the plasma instability feature known as the Beam Plasma Discharge. For the present experiments the FPEG was used in a dc mode with a range of currents of 2 to 80 mA at a beam energy of 970 eV. Attention is given to the emissions of VLF and HF noise associated with the dc beam.

Banks, P. M.↗

Image motion compensation for the OSS-3/7 telescopes

The three telescope for the NASA Office of Space Science (OSS) Missions 3/7 will be clustered on the Instrument Point System (IPS). The IPS is to be mounted on a Spacelab pallet in the space shuttle orbiter. The three telescopes include the Ultraviolet Imaging Telescope (UIT), the Hopkins Ultraviolet Telescope (HUT), and the Wisconsin Ultraviolet Photopolarimetry Experiment (WUPPE). All three instruments have the ability to view from earth orbit stellar objects which are fainter than those which can be seen with ground-based telescopes. An Image Motion Compensation (IMC) system will be required for the appropriate conduct of the observations. The OSS-3/7 pointing problem is discussed, and a cost effective IMC system is proposed.

Shelton, H.L.↗

41-B tenth Space Shuttle mission

The manned maneuvering unit, two untethered ""spacewalks'', EVA timeline, shuttle pallet satellite, payloads (Palapa-B2, Westar 6), and a rehearsal rendezvous are discussed.

Source record↗

Photovoltaic concentrator pointing dynamics and plasma interaction study

The objectives of this experiment are to use the Space Technology Experiments Platform (STEP) system to demonstrate the viability of concentrator photovoltaic arrays by: (1) configuring a deployable mast on the STEP pallet with concentrator mass models and some active photovoltaic modules; (2) measuring the array pointing dynamics under normal rotation as well as disturbance conditions; (3) performing an array plasma interaction experiment to determine the steady-state plasma losses under various voltage conditions; and (4) providing active distributed control of the support truss to determine the improvement in dynamic response. Experiment approach and test control and instrumentation are described.

Stern, T. G.↗

A deployable structure and solar array controls experiment for STEP

A candidate configuration for a controls experiment on the Space Technology Experiments Platform (STEP) is described. The elements of the experiment are the mast, the solar array, and an articulation module between the two. The characteristic dimensions are very compatible for integration on a pallet such a STEP's proposed configuration. The controls' objective would be the measurement of orbiter interaction as well as the system identification of the appendages. The flight experiment configuration would also provide a test bed for various active vibration controls concepts. The instrumentation being considered would measure accelerations, strains, displacements, and temperatures. The deployable mast has eight elements defining a structural bay. Uniaxial measurements would be required to define loads at a cross section of the structure. Displacements due to thermal distortion of the mast and the local state of the solar concentrator may be measured by an optical ranging technique from the orbiter aft flight deck.

Nishimoto, T. S.↗

The development of a high-capacity instrument module heat transport system, appendixes

Data sheets provide temperature requirements for 82 individual instruments that are under development or planned for grouping on a space platform or pallet. The scientific objectives of these instrument packages are related to solar physics, space plasma physics, astronomy, high energy astrophysics, resources observations, environmental observations, materials processing, and life sciences. System specifications are given for a high capacity instrument module heat transport system to be used with future payloads.

Source record↗

Launch processing for Spacelab 1

The final integration of Spacelab payloads with the Shuttle is described. Attention is given to launch processing planning, schedules, quality control, and problem reports and configuration maintenance. Also covered are the integration and checkout of individual and combined experiments, mounting the end cones, attachment of the transfer tunnel, and inclusion of an extra experiments pallet. The entire Spacelab module was subjected to a full systems simulation before deliverance to the Orbiter bay. Modular parts that were transferred from building-to-building were placed in sealed containers filled with a purged atmosphere during transport.

Mcbrayer, R. O.↗

Modulated beam injection from the Space Shuttle during magnetic conjunctions of STS 3 with the DE 1 satellite

An electron beam emitted from the Office of Space Sciences 1 pallet on STS 3 was pulsed with specially designed very low frequency (VLF) formats in an attempt to generate whistler mode waves. Modulated operations of the beam emitted by a fast pulse electron generator (FPEG) were initiated during times of magnetic conjunctions between STS 3 and the high-altitude DE 1 satellite equipped with broadband VLF receivers. Coordinated FPEG/VLF modulation and DE 1 wideband data acquisition were achieved in 12 different cases. No evidence of any waves generated by FPEG were detected on the DE 1 analog wideband data. However, it is shown that in all of the cases, either the STS 3 attitude was such that the emitted electrons struck the main body of the vehicle, or it was not possible for whistler mode waves to propagate from the STS 3 location up to the vicinity of the DE 1 satellite.

Inan, U. S.↗

Radiation measurements aboard Spacelab 1

The radiation environment inside Spacelab 1 was measured by a set of passive radiation detectors distributed throughout the volume inside the module, in the access tunnel, and outside on the pallet. Measurements of the low linear energy transfer (LET) component obtained from the thermoluminescence detectors ranged from 102 to 190 millirads, yielding an average low LET dose rate of 11.2 millirads/day inside the module, about twice the low LET dose rate measured on previous flights of the Space Shuttle. Because of the higher inclination of the orbit (57 versus 28.5 deg for previous Shuttle flights), substantial fluxes of highly ionizing high charge and energy galactic cosmic ray particles were observed, yielding an overall average mission dose-equivalent of about 150 millirems, more than three times higher than that measured on previous Shuttle missions.

Benton, E. V.↗

Measurements of electromagnetic interference on OV102 Columbia using the plasma diagnostics package

The third Space Shuttle mission's OSS-1 payload included 30 Hz-800 MHz and S-band receivers which assessed the intentional (transmitter) and unintentional (subsystem) EMI levels. It was noted that, at the pallet location, the UHF voice downlink transmitter field strengths did not exceed 0.1 V/m. At the remote manipulator system, the figure was 0.5 V/m. Below 300 kHz, the magnetic field noise was 30 dB pT + or - 20 dB, while the electric field noise was broadband and variable over at least 60 dB, depending on thruster firings and Orbiter attitude. This noise may have been generated by the Orbiter's interaction with the ambient plasma.

Shawhan, S. D.↗

The evolution of small payload carrier systems

The design of a bridge-like structure to span the Space Shuttle cargo bay but occupy only 3 feet of its length is discussed. The new structure was named the Missions Peculiar Equipment Support Structure (MPESS). The basic design requirements were as follows: to serve as support structure for small number of experiments; to occupy the minimal length of cargo bay; to have a standard interface hole pattern; to provide support at an elevated position; to employ standard Spacelab pallet trunnion; and to ensure natural frequency between the STS liftoff and landing frequency. The bridge-like structure is a riveted and bolted truss with machind end fittings which interface with the Spacelab trunnions. The structure is fabricated from aluminum alloy and assembled with stainless steel fasteners.

Breaux, C. G.↗

The design, fabrication and delivery of a spacelab neutral buoyancy Instrument Pointing System (IPS) mockup

Underwater simulations of EVA contingency operations such as manual jettison, payload disconnect, and payload clamp actuation were used to define crew aid needs and mockup pecularities and characteristics to verify the validity of simulation using the trainer. A set of mockup instrument pointing system tests was conducted and minor modifications and refinements were made. Flight configuration struts were tested and verified to be operable by the flight crew. Tasks involved in developing the following end items are described: IPS gimbal system, payload, and payload clamp assembly; the igloos (volumetric); spacelab pallets, experiments, and hardware; experiment, and hardware; experiment 7; and EVA hand tools, support hardware (handrails and foot restraints). The test plan preparation and test support are also covered.

Vanvalkenburgh, C. N.↗

Vibroacoustic study of the NASA Goddard Space Flight Center OSS-1 payload

A comparative evaluation of shuttle liftoff and ground test random response data obtained from the Office of Space Science-1 (OSS-1) pallet payload flown in the cargo bay of STS-3 is presented. The study was initiated to evaluate the possibility that the payload flight vibration response can exceed that occurred during ground test when the ground test acoustic excitation is normalized to the flight acoustic environment. In addition, the analytically derived response from the Vibroacoustic Payload Environment Prediction System (VAPEPS) is compared with OSS-1 ground test results.

Lee, Y. A.↗

Shuttle tethered satellite program

Features and applications of the Shuttle tethered satellite system (TSS) are outlined. The TSS would be mounted on a normal cargo pallet and used to deploy or retrieve payloads weighing up to 500 kg from the Orbiter by reeling in or unreeling a tether line extended along the gravity gradient vertical. Attaching a conducting wire to the tether would permit electrodynamic measurements of space plasma. An initial mission under development is to deploy an instruments package 20 km above the Orbiter with a conducting wire tether, thereby obtaining data on low frequency hydromagnetic waves generated by tether passage through the space plasma. An aerodynamics package could also be lowered to 130 km, where measurements can be made with magnetometers for geoscience data, atmospheric composition, and cosmic dust can be collected. Details of engineering assignments for the TSS divided up between NASA and the Italian National Research Council are discussed.

Nolan, M. B.↗

A practical scheduling algorithm for Shuttle-based astronomy missions

In the Astro mission series (initial flight planned for March, 1986), the Shuttle will be used as a dedicated stellar astronomy observatory. A modified Spacelab pallet is to be used for the Astro payload, which will consist of three ultraviolet (UV) telescopes and a wide field camera mounted together on a single gimbal mount called the Inertial Pointing System (IPS). Three flights of 7-10 days duration are to be made with the same payload at intervals of 8-9 months. Previous experience has shown that changes in design requirements are inevitable, and the evolution of operational concepts will effect changes in scheduling algorithm software. For these reasons, the design goals of the Astron algorithm and its family of auxiliary software modules have been related to functional modularity, constraint flexibility, user friendliness, and 'light' input requirements. Attention is given to hardware characteristics, environmental constraints, the basic criteria function, 'Cinderella' logic, counters and constraints, and scheduling trends.

Guffin, O. T.↗

Orbit-on-demand vehicles - Mission possible, but one-day turnaround?

The next generation launch-on-demand manned orbital vehicles will ideally be able to perform plane change maneuvers for rendezvous. Plane-changes of, e.g., 11 deg, will require a 3000 fps on-orbit maneuver velocity. Any plane-change capabilities beyond 800 fps rapidly increase the necessary vehicle weight. Sensitivity studies of the payload weight/vehicle weight, the presence or absence of air-breathing engines, high acceleration, etc., indicated that advances are required in the payload stowage pallet, thermal protection system, fault detection electronics, line-replaceable units, and accessibility to realize one-day turnaround. The spacecraft would also need autonomous systems checks and launch from minimum support sites reached by air ferry. A horizontal take-off, two-stage subsonic launch vehicle so far offers the lowest weight, maximum flexibility and minimum support combination of all configurations under consideration.

Talay, T. A.↗

Spacelab - The multimission machine

The high point of a decade of collaboration between NASA and ESA may have been the Space Shuttle/Spacelab-1 mission of 1983, which was dedicated to multidisciplinary science and verification tasks. Still to be verified by Spacelab-2, on the basis of elements designed, developed and funded by ESA, are 'igloo' pallets for dedicated missions and the Instrument Pointing System. Further variations of mixed cargo carrier systems are the Materials Science Laboratory, the Structural Technology Experiments Platform, and the Dedicated Discipline Laboratories, whose various features and capabilities are presently discussed.

Lohman, R. L.↗