Search NASA⌕ Search

SEARCH · Search NASA

Results for “velocity data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12
All sourcesNASA NTRSDOE OSTI
NASA NTRS1971

Apollo 11 Mission Report, Supplement 5: Performance of Lunar Module Reaction Control Systems

Spacecraft velocity data and crew reports indicated that RCS engine performance was nominal. It is estimated that the RCS engines accumulated a total of 1060 seconds on-time and 12,000 firings during the mission. The quad temperatures ranged from 132 to 232 F during the period when the heaters were active, within predicated ranges. The total propellant consumption from the RCS tanks was about 319 pounds, compared to a predicted value of 253 pounds. An additional 69 pounds of propellant were used from the ascent propulsion system tanks during interconnect feed operations associated with APS lift-off, following periods of rapid propellant usage. The only problems noted were two thrust chamber pressure switch failures on the quad one down-firing engine and on the quad 2 aft-firing engine. Engine performance was nominal on both engines, and the switch failures had no effect on the mission.

Blevins, D. R.↗
NASA NTRS1973

Landing performance of an air cushion landing system installed on a 1/10-scale dynamic model on the C-8 Buffalo airplane

An experimental study was conducted to evaluate the landing behavior of a 1/10-scale dynamic model of the C-8 Buffalo airplane equipped with an air-cushion landing system (ACLS) on a variety of surfaces including both calm and rough water and a smooth hard surface. Taxi runs were made on the hard surface over several obstacles. Landings were made with the model at various pitch and roll attitudes and vertical velocities and at one nominal horizontal velocity. Data from the landings include time histories of the trunk and air-cushion pressures and accelerations at selected locations on the model.

Thompson, W. C.↗
NASA NTRS1974

Electron collection theory for a D-region subsonic blunt electrostatic probe

Blunt probe theory for subsonic flow in a weakly ionized and collisional gas is reviewed, and an electron collection theory for the relatively unexplored case, Deybye length approximately 1, which occurs in the lower ionosphere (D-region), is developed. It is found that the dimensionless Debye length is no longer an electric field screening parameter, and the space charge field effect can be negelected. For ion collection, Hoult-Sonin theory is recognized as a correct description of the thin, ion density-perturbed layer adjacent the blunt probe surface. The large volume with electron density perturbed by a positively biased probe renders the usual thin boundary layer analysis inapplicable. Theories relating free stream conditions to the electron collection rate for both stationary and moving blunt probes are obtained. A model based on experimental nonlinear electron drift velocity data is proposed. For a subsonically moving probe, it is found that the perturbed region can be divided into four regions with distinct collection mechanisms.

Wai-Kwong Lai, T.↗
NASA NTRS1973

The initiation, development, and decay of the secondary flow in a bounded jet

The secondary flow in a low aspect ratio incompressible turbulent bounded jet is described in terms of a near, middle, and far field in which the secondary motion is initiated, developed, and decayed, respectively. The initiation of the secondary flow is explained by the distortion of the planar vortex loops which bound the jet at the exit plane. In the region away from the bounding plates, the vortex loop distortion is similar to that found in rectangular free jets; however, the bounding plates cause an additional production of streamwise vorticity near the plates which has no counterpart in the free jet flow. Downstream of the jet core region, a large-scale secondary flow developes from this vorticity. Farther downstream the secondary flow decays; the resultant flow may be characterized as a combination of a plane jet and boundary layer flows. This explanation is supported by the vorticity and velocity data of this investigation.

Holdeman, J. D.↗
NASA NTRS1973

Radiative relaxation behind strong shock waves in hydrogen-helium mixtures

Radiative relaxation rates have been investigated in a series of hydrogen-helium mixtures over a range of temperatures encountered during outer planet atmospheric entry. Using a conical electric arc shock tube, shock waves with velocities between 10 and 36 km/sec were studied in mixtures of 10% to 85% hydrogen in helium diluent. Intensities for several hydrogen continuum wavelengths and the H-alpha and H-beta lines of hydrogen were measured as a function of time. The nonequilibrium relaxation times were longer than expected for shock velocities greater than 18 km/sec and reached a plateau at higher shock velocities. Data from all mixtures were found to correlate with shock wave temperature.

Leibowitz, L. P.↗
NASA NTRS1973

Processing of the laser Doppler velocimeter signals

The laser Doppler velocimeter (LDV) is a probeless technique that provides a remote measurement of mean and fluctuating velocities. The measurement is actually obtained from small particles embedded in the flow which scatter light from an illuminating laser beam interference pattern. A portion of this scattered light is collected by a photomultiplier which yields an electronic signal whose frequency is directly proportional to the velocity of the small particles. The purpose of this paper is to describe and critically compare three techniques most used to process this electronic signal. These techniques are: (1) spectrum analyzer - a frequency scanning filter (frequency domain instrument), (2) wide-band frequency tracker - a frequency lock loop (frequency domain instrument), and (3) high-speed frequency counter - an interval timer (time domain instrument). The study determines the ability of each technique to process the LDV signal and yield velocity data to be used in determining the flow characteristics.

Meyers, J. F.↗
NASA NTRS1975

Signal processing and display interface studies

Signal processing equipment specifications, operating and test procedures, and systems design and engineering are described. Five subdivisions of the overall circuitry are treated: (1) the spectrum analyzer; (2) the spectrum integrator; (3) the velocity discriminator; (4) the display interface; and (5) the formatter. They function in series: (1) first in analog form to provide frequency resolution, (2) then in digital form to achieve signal to noise improvement (video integration) and frequency discrimination, and (3) finally in analog form again for the purpose of real-time display of the significant velocity data. The formatter collects binary data from various points in the processor and provides a serial output for bi-phase recording. Block diagrams are used to illustrate the system.

Source record↗
NASA NTRS1974

On the flame spreading over a polymer surface

The characteristics of flame propagation along the interface between a solid fuel and a gaseous oxidizer are considered. It is found that difficulties in a study of this problem are related to the eigenvalue character of the relative velocity of the flame with respect to the oxidizer flow. In the proposed model of flame spreading the difficulties are overcome by retaining the ellipticity of the governing equations and by taking the surface pyrolysis into account. The solution procedure makes use of a sink-source approach and the Fourier-transform method. Flame propagation velocity data computed on the basis of the described approach are compared with experimental results.

Ohki, Y.↗
NASA NTRS1978

The role of drop velocity in statistical spray description

The justification for describing a spray by treating drop velocity as a random variable on an equal statistical basis with drop size was studied experimentally. A double exposure technique using fluorescent drop photography was used to make size and velocity measurements at selected locations in a steady ethanol spray formed by a swirl atomizer. The size velocity data were categorized to construct bivariate spray density functions to describe the spray immediately after formation and during downstream propagation. Bimodal density functions were formed by environmental interaction during downstream propagation. Large differences were also found between spatial mass density and mass flux size distribution at the same location.

Groeneweg, J. F.↗
NASA NTRS1977

Silicon web process development

Thirty-five (35) furnace runs were carried out during this quarter, of which 25 produced a total of 120 web crystals. The two main thermal models for the dendritic growth process were completed and are being used to assist the design of the thermal geometry of the web growth apparatus. The first model, a finite element representation of the susceptor and crucible, was refined to give greater precision and resolution in the critical central region of the melt. The second thermal model, which describes the dissipation of the latent heat to generate thickness-velocity data, was completed. Dendritic web samples were fabricated into solar cells using a standard configuration and a standard process for a N(+) -P-P(+) configuration. The detailed engineering design was completed for a new dendritic web growth facility of greater width capability than previous facilities.

Duncan, C. S.↗
NASA NTRS1978

Ion convection and the formation of the mid-latitude F region ionization trough

Total ion concentration and ion drift velocity data from Atmospheric Explorer C are used to examine the convective flow of plasma in the vicinity of the midlatitude F region ionization trough. It is found that the low-latitude portion of the premidnight trough is a region of slow eastward plasma drift while the poleward portion is characterized by generally westward flow. The reversal from eastward to westward flow is described. It is proposed that the plasma flux tubes within the premidnight trough have corotated eastward into the evening local time sector from dusk before stagnating and flowing westward at higher latitudes in the nighttime sector. The role of F region recombination in trough formation is considered.

Spiro, R. W.↗
NASA NTRS1979

Release adiabat measurements on minerals: The effect of viscosity

The current inversion of pressure-particle velocity data for release from a high pressure shock state to a pressure-density path is analyzed. It is assumed that the release process is isentropic. It was shown that for geological materials below stresses of 150 GPa, the effective viscosity must be 1000 kg/m/s in order that the viscous (irreversible) work carried out on the material in the shock state remains small compared to the mechanical work recovered upon adiabatic rarefaction. The available data pertaining to the offset of the Rayleigh line from the Hugoniot for minerals, the magnitude of the shear stress in the high pressure shock state for minerals, and the direct measurements of the viscosities of several engineering materials shocked to pressures below 150 GPa yield effective viscosities of 1000 kg/m/s or less. An inferance that this indicates that the conditions for isentropic release of minerals from shock states are achieved, and a conclusion that the application of the Riemann integral to obtain pressure-density states along the release adiabats of minerals in shock experiments is valid are made.

Jeanloz, R.↗
NASA NTRS1979

Particle size and velocity measurement in flames by laser anemometer

Simultaneous droplet size and velocity measurements by a particle counting Laser Doppler Anemometer (LDA) in kerosene fuel sprays under burning and non-burning conditions are presented. Particle sizes are derived from pulse height analysis of the mean LDA signals and velocities are simultaneously determined by measuring Doppler shift frequencies. The measurements show that droplet velocity is a function of droplet diameter for burning and non-burning conditions, and spatially averaged size distributions are derived from velocity data. A comparison of results obtained under burning and non-burning conditions show changes in size distribution due to preferential vaporization of small droplets, acceleration due to thermal expansion of gases, and corresponding changes in droplet momentum.

Chigier, N. A.↗
NASA NTRS1979

Release adiabat measurements on minerals - The effect of viscosity

The paper examines the effect of viscosity in the release adiabat measurements on minerals. The current inversion of pressure-particle velocity data for release from a high-pressure shock state to a pressure-density path usually depends critically upon the assumption that the release process is isentropic. It has been shown that the effective viscosity for geological materials below stresses of 150 GPa must be at least 1000 kg/m/s so that viscous work in the shock state remains small compared to mechanical work recovered upon adiabatic rarefaction. The magnitude of the shear stress in the shock state in minerals and viscosities of engineering materials shocked to pressures below 150 GPa show effective viscosities of about 1000 kg/m/s or less indicating that the conditions for isentropic release of materials from shock states are achieved and that the Riemann integral can be applied to obtain pressure-density states along the release adiabats of minerals.

Jeanloz, R.↗
NASA NTRS1980

Turbulent eddy diffusivity and mean eddy lifetimes measured in spray combustion

A quantitative description of the eddy structure that occurs in turbulent combustion processes can be obtained by the use of laser velocimetry, as shown in this work. The mean eddy length scales, eddy lifetimes, and turbulent diffusivity have been determined in a spray combustion flame for the first time. Velocity data was obtained at various locations within the flame, and standard correlation techniques were modified and then applied to reduce the data. In order to assess how the spray burns, the measured eddy lifetimes were compared with the relevant reaction times and drop lifetimes. Conditions that are conducive to group combustion of the droplets, rather than individual droplet combustion, were found to exist in the upstream region of the spray. Local measurements of the hydrocarbon concentration also support the conclusion that the majority of droplets undergo group combustion. However, the data indicate that some of the larger drops can survive the initial burning region and form a dilute spray downstream where conditions favor individual droplet combustion.

Driscoll, J. F.↗
NASA NTRS1981

Basic research in wake vortex alleviation using a variable twist wing

The variable twist wing concept was used to investigate the relative effects of lift and turbulence distribution on the rolled up vortex wake. Several methods of reducing the vortex strength behind an aircraft were identified. These involve the redistribution of lift spanwise on the wing and drag distribution along the wing. Initial attempts to use the variable twist wing velocity data to validate the WAKE computer code have shown a strong correlation, although the vorticity levels were not exactly matched.

Morris, D. J.↗
NASA NTRS1981

Laser-velocimeter flow-field measurements of an advanced turboprop

Non-intrusive measurements of velocity about a spinner-propeller-nacelle configuration at a Mach number of 0.8 were performed. A laser velocimeter, specifically developed for these measurements in the NASA Lewis 8-foot by 6-foot Supersonic Wind Tunnel, was used to measure the flow-field of the advanced swept SR-3 turboprop. The laser velocimeter uses an argon ion laser and a 2-color optics system to allow simultaneous measurements of 2-components of velocity. The axisymmetric nature of the propeller-nacelle flow-field permits two separate 2 dimensonal measurements to be combined into 3 dimensional velocity data. Presented are data ahead of and behind the prop blades and also a limited set in between the blades. Aspects of the observed flow-field such as the tip vortex are discussed.

Serafini, J. S.↗