Search NASA⌕ Search

SEARCH · Search NASA

Results for “Density fractionation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Cloud Condensation Nuclei Closure Study Using Airborne Measurements Over the Southern Great Plains

Abstract Airborne measurements of non‐refractory bulk aerosol chemical composition, aerosol size distributions, and cloud condensation nuclei (CCN) were conducted onboard a research aircraft during the Holistic Interactions of Shallow Clouds, Aerosols and Land Ecosystems field campaign in the spring and summer of 2016. A CCN closure study for the entire campaign period was performed where measured CCN concentrations at 0.24% and 0.46% supersaturation were compared with the predicted CCN concentrations calculated using κ ‐Köhler theory, three different assumptions of aerosol mixing state, and various assumptions about hygroscopicity, density, and the insoluble fraction of organic particles. We found that the Closure Ratio (CR), calculated as the ratio of predicted to measured CCN concentrations, was equal to one under two different aerosol mixing state assumptions: (a) all particles are composed of 100% organic particles, and (b) particles are externally mixed and composed of pure sulfates, nitrates, and organic particles assuming hygroscopicity values for organic particles ( ) between 0.04 and 0.17. The use of internal mixing state assumption often led to overprediction of CCN concentrations but the agreement within ±20% with the measured CCN concentrations was observed under certain closure permutations. A similar agreement, that is, within ±20%, was also observed using permuted parameters concerning density (1 and 1.5 g cm −3 ) and an insoluble fraction (0% and 20%) of organic particles. These findings may provide constraints on to predict CCN concentrations at a remote continental Southern Great Plains site.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1974

On ionization in H I regions

A comparison is made of the K I, Na I, Ca II, and H I interstellar absorption lines formed in relatively low-density interstellar clouds in H I regions. The data indicate that the fractional ionization (ratio of electron density to hydrogen density) is nearly constant for a range in hydrogen densities covering a factor of 15. If ionization balance exists in the clouds, then ionization of hydrogen by either low-energy cosmic rays or soft X-rays cannot be the principal source of the observed free electrons, and the hydrogen ionization rate is less than 10 to the -16th power per sec for these processes.

Hobbs, L. M.↗
DOE OSTI2021

Examination of probability distribution of mixture fraction in LES/FDF modelling of a turbulent partially premixed jet flame

An accurate prediction of the probability density function (PDF) of the mixture fraction is crucial to the prediction of combustion since mixing plays an important role in turbulent non-premixed and partially premixed flames. This work provides an assessment of the large-eddy simulation (LES)/filtered density function (FDF) method for the prediction of the PDF of the mixture fraction. The advantage of the LES/FDF method is that it provides the full predictions of the statistical distribution of scalars including the mixture fraction. The predictive accuracy of the method for the PDF is yet to be fully validated. Assessing the prediction of the PDF of the mixture fraction, a conserved scalar, is an important starting point. The Sydney/Sandia inhomogeneous inlet jet flame is used as a test case. A quick comparison shows that the LES/FDF predicted PDF shapes of the mixture fraction deviate significantly from the commonly presumed Beta-PDF as well as from the experimental data in the flame. Here, to examine the source of the discrepancy, we clarify the different PDF definitions used in the comparison among the predictions, measurements, and the presumed shape PDFs. The discrepancy observed from the comparison is largely reconciled by clarifying the difference between the PDFs that are examined. The PDF of the resolved mixture fraction is shown to be close to the Beta-PDF in both the measurements and predictions, while the PDF directly deduced from the LES/FDF particles deviates significantly from the Beta-PDF. A multimodal PDF analysis and a pseudo convergence analysis are conducted to provide plausible evidence to support the predicted multimodal PDF shapes. The sub-filter scale FDF is shown to be close to the Beta-PDF too through the construction of a synthesized PDF, which supports the common presumed Beta-PDF assumption used in the presumed PDF methods when combined with LES.

42 ENGINEERING↗
DOE OSTI2021

Constraining the nonanalytic terms in the isospin-asymmetry expansion of the nuclear equation of state

In this report we examine the properties of the isospin-asymmetry expansion of the nuclear equation of state from chiral two- and three-body forces. We focus on extracting the high-order symmetry energy coefficients that consist of both normal terms (occurring with even powers of the isospin asymmetry) as well as terms involving the logarithm of the isospin asymmetry that are formally nonanalytic around the expansion point of isospin-symmetric nuclear matter. These coefficients are extracted from numerically precise perturbation theory calculations of the equation of state coupled with a new set of finite difference formulas that achieve stability by explicitly removing the effects of higher-order terms in the expansion. We consider contributions to the symmetry energy coefficients from both two- and three-body interactions. It is found that the coefficients of the logarithmic terms are generically larger in magnitude than those of the normal terms from second-order perturbation theory diagrams, but overall the normal terms give larger contributions to the ground state energy. The high-order isospin-asymmetry terms are especially relevant at large densities where they affect the proton fraction in β-equilibrium matter, and in particular we find that at twice saturation density they can reduce the proton fraction by up to 0.02.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
NASA NTRS2013

Current Flow and Pair Creation at Low Altitude in Rotation-Powered Pulsars' Force-Free Magnetospheres: Space Charge Limited Flow

We report the results of an investigation of particle acceleration and electron-positron plasma generation at low altitude in the polar magnetic flux tubes of rotation-powered pulsars, when the stellar surface is free to emit whatever charges and currents are demanded by the force-free magnetosphere. We apply a new 1D hybrid plasma simulation code to the dynamical problem, using Particle-in-Cell methods for the dynamics of the charged particles, including a determination of the collective electrostatic fluctuations in the plasma, combined with a Monte Carlo treatment of the high-energy gamma-rays that mediate the formation of the electron-positron pairs.We assume the electric current flowing through the pair creation zone is fixed by the much higher inductance magnetosphere, and adopt the results of force-free magnetosphere models to provide the currents which must be carried by the accelerator. The models are spatially one dimensional, and designed to explore the physics, although of practical relevance to young, high-voltage pulsars. We observe novel behaviour (a) When the current density j is less than the Goldreich-Julian value (0 < j/j(sub GJ) < 1), space charge limited acceleration of the current carrying beam is mild, with the full Goldreich-Julian charge density comprising the charge densities of the beam and a cloud of electrically trapped particles with the same sign of charge as the beam. The voltage drops are of the order of mc(sup 2)/e, and pair creation is absent. (b) When the current density exceeds the Goldreich-Julian value (j/j(sub GJ) > 1), the system develops high voltage drops (TV or greater), causing emission of curvature gamma-rays and intense bursts of pair creation. The bursts exhibit limit cycle behaviour, with characteristic time-scales somewhat longer than the relativistic fly-by time over distances comparable to the polar cap diameter (microseconds). (c) In return current regions, where j/j(sub GJ) < 0, the system develops similar bursts of pair creation. These discharges are similar to those encountered in previous calculations by Timokhin of pair creation when the surface has a high work function and cannot freely emit charge. In cases (b) and (c), the intermittently generated pairs allow the system to simultaneously carry the magnetospherically prescribed currents and adjust the charge density and average electric field to force-free conditions. We also elucidate the conditions for pair creating beam flow to be steady (stationary with small fluctuations in the rotating frame), finding that such steady flows can occupy only a small fraction of the current density parameter space exhibited by the force-free magnetospheric model. The generic polar flow dynamics and pair creation are strongly time dependent. The model has an essential difference from almost all previous quantitative studies, in that we sought the accelerating voltage (with pair creation, when the voltage drops are sufficiently large; without, when they are small) as a function of the applied current.

Timokhin, A. N.↗
NASA NTRS1995

Are Unidentified Extreme-Ultraviolet Sources the Closest Neutron Stars?

Unidentified extreme-ultraviolet (EUV) sources, detected in the EUVE and ROSAT WFC all-sky surveys, could be isolated old neutron stars, accreting material from the interstellar medium (ISM). The closest neutron stars, which are located in the local ISM bubble of unusually low density, are faint and cool (L approximately 10(exp 27) erg/s, T approximately < 6 eV). The extreme-UV spectrum of these sources is very sensitive to the H I column density, since a large fraction of the energy is emitted just below the hydrogen Lyman edge. The EUVE sources with large count rates in the long-wavelength bandpass (600 A) seem to be the most promising candidates. These sources should have low H I column density (N(sub H I) approximately < 10(exp 18) sq cm), constraining their distances to a few tens of parsecs. Otherwise, their spectra would be significantly modified by ISM absorption, and inevitably they would appear stronger in the short-wavelength (100 A, 200 A) EUVE bandpasses. If these unidentified objects are familiar EUV sources rather than neutron stars, i.e. white dwarfs, late-type stars or cataclysmic variables, they are expected to be identifiable, and generally brighter than V approximately 14.

Shemi, A.↗
NASA NTRS1991

The evolving intergalactic medium - The uncollapsed baryon fraction in a cold dark matter universe

The time-varying density of the intergalactic medium (IGM) is calculated by coupling detailed numerical calculations of the thermal and ionization balance and radiative transfer in a uniform IGM of H and He to the linearized equations for the growth of density fluctuations in both gases and a dark component in a cold dark matter universe. The IGM density is identified with the collapsed baryon fraction. It is found that even if the IGM is never reheated, a significant fraction of the baryons remain uncollapsed at redshifts of four. If instead the collapsed fraction releases enough ionizing radiation or thermal energy to reionize the IGM by z greater than four as required by the Gunn-Peterson (GP) constraint, the uncollapsed fraction at z of four is even higher. The known quasar distribution is insufficient to supply the ionizing radiation necessary to satisfy the GP constraint in this case and, if stars are instead responsible, a substantial metallicity must have been produced by z of four.

Shapiro, Paul R.↗
NASA NTRS1973

Thermal and suprathermal plasma densities in the outer magnetosphere

Using the low-frequency cutoff of electromagnetic noise trapped in the magnetosphere at frequencies above the local plasma frequency, it is now possible to make very accurate, + or - 1%, electron density measurements in the low density region between the magnetopause and plasmapause. This technique for measuring the total plasma density was used, together with measurements of the suprathermal proton intensities with the LEPEDEA instrumentation on the IMP-6 spacecraft, to determine the thermal proton densities in the region between the plasmapause and magnetopause. Although the thermal protons usually account for a significant fraction, approximately 50%, of the total proton density in this region, in some cases, particularly at the larger radial distances the density of the thermal protons sometimes drops to a very small fraction, 5%, of the total density and nearly all of the plasma consists of suprathermal particles.

Gurnett, D. A.↗
NASA NTRS1997

Colloids and Nucleation

The objectives of the work funded under this grant were to develop a microphotographic technique and use it to monitor the nucleation and growth of crystals of hard colloidal spheres. Special attention is given to the possible need for microgravity studies in future experiments. A number of persons have been involved in this work. A masters student, Keith Davis, began the project and developed a sheet illumination apparatus and an image processing system for detection and analysis. His work on a segmentation program for image processing was sufficient for his master's research and has been published. A post doctoral student Bernie Olivier and a graduate student Yueming He, who originally suggested the sheet illumination, were funded by another source but along with Keith made photographic series of several samples (that had been made by Keith Davis). Data extraction has been done by Keith, Bernie, Yueming and two undergraduates employed on the grant. Results are published in Langmuir. These results describe the sheet lighting technique as one which illuminates not only the Bragg scattering crystal, but all the crystals. Thus, accurate crystal counts can be made for nucleation rate measurements. The strange crystal length scale reduction, observed in small angle light scattering (SALS) studies, following the initial nucleation and growth period, has been observed directly. The Bragg scattering (and dark) crystal size decreases in the crossover region. This could be an effect due to gravitational forces or due to over- compression of the crystal during growth. Direct observations indicate a complex morphology for the resulting hard sphere crystals. The crystal edges are fairly sharp but the crystals have a large degree of internal structure. This structure is a result of (unstable) growth and not aggregation. As yet unpublished work compares growth exponents data with data obtained by SALS. The nucleation rate density is determined over a broad volume fraction range (0.505 to 0.575) and compared to classical nucleation rate calculations. The experimental nucleation rate density varies with volume fraction more slowly than expected theoretically. Gravity may influence nucleation because crystal nuclei are more dense than the surrounding fluid and may be gravitationally convected. The largest observed crystal size was near volume fraction 0.52. Near the freezing point, crystals should grow to large size because nuclei are sparse and there is plenty of room to grow without contacting other crystals. Near melting the opposite is true, with crystals growing into one another shortly after nucleation. The maximum crystal size seen near 0.52 volume fraction suggests that gravitational stresses are limiting crystal growth near freezing.

Ackerson, Bruce↗
NASA NTRS1992

The compositional structure and the effects of exothermicity in an unpremixed planar jet flame

Results are presented of direct numerical simulations (DNS) of a randomly perturbed compressible, spatially developing planar jet under the influence of a finite rate Arrhenius chemical reaction of the type F + O yields Product + Heat. The objectives of the simulations are to assess the compositional structure of the flame and to determine the influence of reaction exothermicity by means of statistical sampling of the data generated by DNS. It is shown that even with this idealized kinetics model, the simulated results exhibit features in accordance with experimental data. These results indicate that the Damkoehler number is an important parameter in determining the statistical composition of the reacting field, and that the results are insensitive to the mechanism by which this parameter is varied. It is demonstrated that as the intensity of mixing is increased and the effect of finite rate chemistry is more pronounced, the magnitudes of the ensemble mean and rms of the product mass fraction decrease, and those of the reactants mass fraction increase. Also, at higher mixing rates the joint probability density functions of the reactants' mass fractions shift towards higher values within the composition domain indicating a lower reactedness. These trends are consistent with those observed experimentally and are very useful in portraying the statistical structure of non-equilibrium diffusion flames. The DNS generated data are also utilized to examine the applicability of the 'laminar diffusion flamelet model' in predicting the rate of the reactant conversion with finite rate chemistry. This examination indicates that the bounds of the product formation scale reasonably well with those obtained by the flamelet model. However, in the range of the relatively low values of the Damkoehler numbers considered, the scatter of the results is substantially more than that to be completely determined by the closure.

Steinberger, C. J.↗
NASA NTRS1993

The compositional structure and the effects of exothermicity in a nonpremixed planar jet flame

Results are presented of direct numerical simulation (DNS) of a randomly perturbed compressible, spatially developing two-dimensional planar jet under the influence of a finite rate chemical reaction of the type F + O yields product. The objectives of the simulations are to assess the compositional structure of the flame and to determine the influence of reaction exothermicity by means of statistical sampling of the DNS generated data. It is shown that even with this idealized kinetics model the simulated results exhibit features in accord with experimental data. These results indicate that the Damkohler number is an important parameter in determining the statistical composition of the reacting field and that the results are not very sensitive to the mechanism by which this parameter is varied. It is demonstrated that as the intensity of mixing is increased and the effect of finite rate chemistry is more pronounced, the magnitudes of the ensemble mean and variance of the product mass fraction decrease and those of the reactants' mass fraction increase. Also, at higher mixing rates the joint probability density functions of the reactants' mass fractions shift towards higher values within the composition domain, indicating a lower reactedness.

Steinberger, C. J.↗
NASA NTRS1991

Electron densities and the excitation of CN in molecular clouds

In molecular clouds of modest density and relatively high fractional ionization, the rotational excitation of CN is controlled by a competition among electron impact, neutral impact and the interaction with the cosmic background radiation. The degree of excitation can be measured through optical absorption lines and millimeter-wave emission lines. The available, accurate data on CN in diffuse and translucent molecular clouds are assembled and used to determine electron densities. The derived values, n(e) = roughly 0.02 - 0.5/cu cm, imply modest neutral densities, which generally agree well with determinations by other techniques. The absorption- and emission-line measurements of CN both exclude densities higher than n(H2) = roughly 10 exp 3.5/cu cm on scales varying from 0.001 to 60 arcsec in these clouds.

Black, John H.↗
DOE OSTI2021

Development of a Deep Learning Model for Predicting the Drag Coefficients of Spherical and Non-Spherical Particles,

There is yet to be a well-established drag model for non-spherical particles required in a particle-laden flow that could cover a wide range of sphericities. This talk will explore the development of a general drag model for non-spherical particles by applying deep learning using available experimental data available in the literature. The integration of several raw experimental measurements from different sources and research directions allows the training of robust Artificial Intelligence and Machine Learning (ML) models. Neural networks are an ML approach inspired by the inner biological workings of the brain. This work aims to develop a Deep Neural Network (DNN) that predicts drag coefficient values with the ability to adapt appropriately to unseen data. Given the limited number of data points available and the variance found within the data collected from various sources, challenges may arise when looking to train the model. Our study tests and implements various model regularization techniques and assesses different loss and activation functions for the proposed DNN. The proposed model considers a broader range of features other than sphericity and Reynold number. These features include density ratio, solid volume fraction, lengthwise and crosswise sphericity, and more. Furthermore, we present the features that play a significant role in predicting different drag coefficients through feature importance. Within the investigated parameter ranges in this study, the following conclusions can be achieved and summarized below: • An improved drag coefficient model can be developed by considering more features such as, aspect ratio, lengthwise sphericity, crosswise sphericity, and density ratio. • DNN model can predict better results compared to traditional methods using MAE metric. • The proposed model addresses data challenges such as limited data and extreme data points through expanded feature-set and regularization. • Three major features that mostly affect the drag coefficient were identified from a feature importance analysis.

Presa-Reyes, Maria↗
DOE OSTI2026

Physics basis for the reference flat-top plasma scenario in the ST–E1 fusion power plant

As part of the U.S. Department of Energy’s Milestone-Based Fusion Energy Development Program, Tokamak Energy has completed the pre-concept design of the ST–E1 fusion power plant. ST–E1 is envisaged to operate in two phases: a pilot plant phase, targeting sustained net power production of 300 - 500 MWe for a duration >1 hr, followed by a commercial power plant phase targeting steady-state operations and a normalised overnight capital cost of ⩽12 000 $\$$/kWe. The design process adopted was highly iterative, integrating all major plant systems and progressing in a phased fidelity approach. At the pre-conceptual stage, the emphasis has been on exploring the design space, identifying the main system-level trade-offs, and making the key decisions that define the overall plant concept, rather than optimising a single operating point. This paper, part of a focused collection detailing the ST–E1 pre-concept design, addresses the development of a series of reference flat-top plasma operating points for the pilot plant phase. A modelling workflow was established to develop and assess candidate plasma design points and explore key dependencies. The workflow includes integrated core plasma modelling, magnetohydrodynamic (MHD) stability assessment, equilibrium generation, scrape-off-layer and exhaust modelling, heating & current drive design and optimisation, and turbulent transport modelling. Using this framework, the impact of several key parameters on the flat-top operating space was investigated, including the density limit, core radiation fraction and divertor power loading, level of external heating and curent drive power and assumed pedestal characteristics. The MHD stability, controllability and micro-stability characteristics of these plasmas were also analysed. These investigations informed the definition of a set of fully non-inductive, flat-top reference operating points that satisfy the high-level ST–E1 mission, including a low and high density case, a case that is stable to resistive wall modes and a case with reduced divertor power loading.

ST–E1↗
DOE OSTI2021

Helium causing disappearance of a/2<111> dislocation loops in binary Fe-Cr ferritic alloys

In this work, single and dual-beam self-ion irradiations were performed at 500°C on ultra-high purity Fe14%Cr alloy to ~0.33 displacements-per-atom (dpa), and 0 or 3030 atomic-parts-per-million (appm) helium/dpa, respectively. Using transmission electron microscopy, we reveal that helium can drastically modify the dislocation loop Burgers vector in Fe-Cr alloys. Helium co-implantation caused complete disappearance of a/2<111> type dislocation loops, and the microstructure consisted of only a<100> loops. Conversely, a/2<111> type loops were predominant without He co-implantation. The total loop density remained largely unaffected. The results strikingly contrast literature asserting that helium stabilizes a/2<111> type loops in bcc Fe alloys, based on low temperature irradiations. Collectively analyzing the results with literature suggest that the small positive interaction between helium and self-interstitial atoms (SIA) in Fe predicted by atomistic simulations maybe insufficient to holistically explain the dislocation loop microstructure development in presence of helium. Helium-SIA positive binding inadvertently implies elevated a/2<111> loop fraction and higher loop densities that the present results contradict. Helium induced high cavity density causing a preferential loss of highly glissile <111> clusters, leaving the matrix saturated with <100> type clusters is proposed as a potential mechanism. Further, the in-situ irradiations combined with Burgers vector analysis strengthened the evidence of Cr-induced dislocation loop mobility reduction that appears to stabilize the a/2<111> type loops and causes higher loop densities in Fe-Cr alloys.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Inhomogeneous energy injection in the 21-cm power spectrum: Sensitivity to dark matter decay

The 21-cm signal provides a novel avenue to measure the thermal state of the Universe during cosmic dawn and reionization (redshifts z ~ 5–30), and thus to probe energy injection from decaying or annihilating dark matter (DM). These DM processes are inherently inhomogeneous: both decay and annihilation are density-dependent, and furthermore, the fraction of injected energy that is deposited at each point depends on the gas ionization and density, leading to further anisotropies in absorption and propagation. In this work, we develop a new framework for modeling the impact of spatially inhomogeneous energy injection and deposition during cosmic dawn, accounting for ionization and baryon density dependence, as well as the attenuation of propagating photons. We showcase how this first completely inhomogeneous treatment affects the predicted 21-cm power spectrum in the presence of exotic sources of energy injection, and forecast the constraints that upcoming HERA measurements of the 21-cm power spectrum will set on DM decays to photons and to electron/positron pairs. These projected constraints considerably surpass those derived from CMB and Lyman-a measurements, and for decays to electron/positron pairs they exceed all existing constraints in the sub-GeV mass range, reaching lifetimes of ~10 28 s. Our analysis demonstrates the unprecedented sensitivity of 21-cm cosmology to exotic sources of energy injection during the cosmic dark ages. Our code, dm21cm, includes all these effects and is publicly available in an accompanying release.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2022

Simulation and Reynolds-averaged Navier-Stokes modeling of a three-component Rayleigh-Taylor mixing problem with thermonuclear burn

Rayleigh-Taylor mixing in the presence of a third component with intermediate density is investigated through three-dimensional large-eddy simulation (LES) with a high-order compact finite-difference code. Two configurations are considered: (1) a symmetric configuration in which the Atwood number between the heavy and intermediate components matches the Atwood number between the intermediate and light components and (2) an asymmetric configuration in which the Atwood number between the heavy and intermediate components is an order of magnitude greater than the Atwood number between the intermediate and light components. Mass fraction covariances are extracted, and proposed Reynolds-averaged Navier-Stokes (RANS) closures for density-specific-volume and density-mass-fraction covariances are evaluated in an a priori fashion. Additionally, a multicomponent extension of the k - Φ - L - a - V RANS model [Morgan, Phys. Rev. E 104, 015107 (2021)] is presented which includes model equations for the upper-triangular elements of the mass fraction covariance matrix. This model, referred to as the k - Φ - L - a - C model, is compared against results from LES and against other RANS models. Profiles of average mass fraction, mass-fraction covariance, and density-specific-volume covariance obtained with the k - Φ - L - a - C model are found to agree well with LES data. Finally, the impact of three-component turbulent mixing on average reaction rate is investigated in both premixed and nonpremixed cases by heating the mixing layer and allowing it to undergo thermonuclear (TN) burn. A closure model for average reaction rate is proposed for use with the k - Φ - L - a - C model, and when this model is applied, improved agreement is obtained between LES and RANS in total TN neutron production.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗