Search NASA⌕ Search

SEARCH · Search NASA

Results for “High angle of attack”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13
All sourcesNASA NTRSDOE OSTI
NASA NTRS1972

Reentry heating and flow fields for Space Shuttle Orbiter at high angle of attack.

Rarefied flow fields and heating rates are calculated by a Monte Carlo direct simulation technique for several shuttle orbiter configurations at angles of attack between 40 and 60 deg. Continuum inviscid flow fields are determined by 2-D unsteady and 3-D steady finite-difference/artificial viscosity techniques used in combination with a 2-D shock layer analysis method. Continuum viscous flow fields and heating rates are computed by a boundary-layer integral matrix technique and an aerodynamic heating method.

Rochelle, W. C.↗
NASA NTRS1974

Onset of aerodynamic side forces at zero sideslip on symmetric forebodies at high angles of attack

Selected results are presented from extensive wind-tunnel tests that include variations in axial and cross-sectional shape, fineness ratio, bluntness, strakes, and boundary-layer trips over a wide range of conditions (angles of attack to 90 deg, angles of sideslip to 30 deg, Reynolds numbers from subcritical to supercritical, and Mach numbers from 0.1 to 0.7). Pointed forebodies at zero sideslip can experience side forces as large as maximum normal forces. The angle of attack at the onset of side force can be correlated with nose angle and afterbody length. Furthermore, these side forces can be reduced or eliminated by bluntness or nose strakes.

Keener, E. R.↗
NASA NTRS1975

Wind tunnel investigation of the aerodynamic characteristics of five forebody models at high angles of attack at Mach numbers from 0.25 to 2

Five forebody models of various shapes were tested in the Ames 6- by 6-Foot Wind Tunnel to determine the aerodynamic characteristics at Mach numbers from 0.25 to 2 at a Reynolds number of 800000. At a Mach number of 0.6 the Reynolds number was varied from 0.4 to 1.8 mil. Angle of attack was varied from -2 deg to 88 deg at zero sideslip. The purpose of the investigation was to determine the effect of Mach number of the side force that develops at low speeds and zero sideslip for all of these forebody models when the nose is pointed. Test results show that with increasing Mach number the maximum side forces decrease to zero between Mach numbers of 0.8 and 1.5, depending on the nose angle; the smaller the nose angle of the higher the Mach number at which the side force exists. At a Mach number of 0.6 there is some variation of side force with Reynolds number, the variation being the largest for the more slender tangent ogive.

Keener, E. R.↗
NASA NTRS1976

Asymmetric aerodynamic forces on aircraft at high angles of attack - some design guides

Aerodynamic side forces on forebodies are considered that are produced by two types of flow: asymmetric vortices on bodies of revolution and nonuniform flow separation on square bodies with rounded corners under spinning conditions. Steady side forces that can be as large as the normal force are produced by asymmetric vortices on pointed forebodies. This side force has a large variation with Reynolds number, decreases rapidly with Mach number, and can be nearly eliminated with small nose bluntness or strakes. The angle of attack where the side force first occurs depends primarily on body geometry. The theoretical techniques to predict these side forces are necessarily semi-empirical because the basic phenomenon is not well understood. The side forces produced by nonuniform flow separation under spinning conditions depend extensively on spin rate, angle of attack, and Reynolds number. The application of simple crossflow theory to predict this side force is inadequate much below angles of attack of 90 deg.

Chapman, G. T.↗
NASA NTRS1976

Effects of Mach number and afterbody length on aerodynamic side forces at zero sideslip on symmetric bodies at high angles of attack

Wind-tunnel measurements of side force over the Mach number range of 0.25 to 2 for pointed forebody-alone and for ogive-cylinder models of various fineness ratios up to 16, are presented. The angle of attack where side force first occurs (onset), where it returns to zero (upper limit), and its magnitude are examined. The onset angle depends only on body geometry, longer bodies having lower onset angles. The upper limit, which is about 80 deg at M = 0.25, decreases with Mach number. The maximum side forces decrease with increasing Mach number, approaching zero within the Mach number range of 0.8 to 1.2; within this range, the Mach number at which the forces approach zero varies directly with forebody slenderness.

Keener, E. R.↗
NASA NTRS1977

Prediction of static aerodynamic characteristics for slender bodies alone and with lifting surfaces to very high angles of attack

An engineering-type method is presented for computing normal-force and pitching-moment coefficients for slender bodies of circular and noncircular cross section alone and with lifting surfaces. In this method, a semi-empirical term representing viscous-separation crossflow is added to a term representing potential-theory crossflow. For many bodies of revolution, computed aerodynamic characteristics are shown to agree with measured results for investigated free-stream Mach numbers from 0.6 to 2.9. The angles of attack extend from 0 deg to 180 deg for M = 2.9 from 0 deg to 60 deg for M = 0.6 to 2.0. For several bodies of elliptic cross section, measured results are also predicted reasonably well over the investigated Mach number range from 0.6 to 2.0 and at angles of attack from 0 deg to 60 deg. As for the bodies of revolution, the predictions are best for supersonic Mach numbers. For body-wing and body-wing-tail configurations with wings of aspect ratios 3 and 4, measured normal-force coefficients and centers are predicted reasonably well at the upper test Mach number of 2.0. Vapor-screen and oil-flow pictures are shown for many body, body-wing and body-wing-tail configurations. When spearation and vortex patterns are asymmetric, undesirable side forces are measured for the models even at zero sideslip angle. Generally, the side-force coefficients decrease or vanish with the following: increase in Mach number, decrease in nose fineness ratio, change from sharp to blunt nose, and flattening of body cross section (particularly the body nose).

Jorgensen, L. H.↗
NASA NTRS1977

A subsonic flow investigation on a research body at high angles of attack

Tests conducted in the Ames 12-foot pressure wind tunnel on a rotating research body at angles of attack of 45 to 90 deg yielded results that were inconsistent with simple cross-flow theory. Consequently, force and pressure distribution tests along with oil and sublimation flow-visualization studies were conducted in the same tunnel on a nonrotating model to attempt to explain the behavior observed in the rotary tests. These studies indicate that at appropriate conditions of Reynolds number and angle of attack, inflectional instabilities occur in the boundary layer that materially affect separation and, hence, the aerodynamic forces. Calculations of cross-flow Reynolds numbers are made and compared with other works on inflectional instability.

Clarkson, M. H.↗
NASA NTRS1978

Test data report, low speed wind tunnel tests of a full scale lift/cruise-fan inlet, with engine, at high angles of attack

A low speed wind tunnel test of a fixed lip inlet with engine, was performed. The inlet was close coupled to a Hamilton Standard 1.4 meter, variable pitch fan driven by a lycoming T55-L-11A engine. Tests were conducted with various combinations of inlet angle of attack freestream velocities, and fan airflows. Data were recorded to define the inlet airflow separation boundaries, performance characteristics, and fan blade stresses. The test model, installation, instrumentation, test, data reduction and final data are described.

Shain, W. M.↗
NASA NTRS1978

Computation of hypersonic laminar viscous flow past spinning sharp and blunt cones at high angle of attack

Computational results, obtained with a parabolic Navier-Stokes marching code, are presented for hypersonic viscous flow past spinning sharp and blunt cones at angle of attack. The code takes into account the asymmetries in the flow field resulting from spinning motion and computes the asymmetric shock shape, crossflow and streamwise shear, heat transfer, crossflow separation, and vortex structure. The Magnus force and moments are also computed. Comparisons are made with other theoretical analyses based on boundary-layer and boundary-region equations, and an anomaly is discovered in the displacement thickness contribution to the Magnus force when compared with boundary-layer results. In addition, a new criterion for defining crossflow separation behind spinning bodies is introduced which generalizes the Moore-Rott-Sears criterion for two-dimensional unsteady separation. A condition which characterizes the onset of separation in the flow field is defined.

Agarwal, R.↗
NASA NTRS1978

Vortex Effects for Canard-wing Configurations at High Angles of Attack in Subsonic Flow

A fully three-dimensional subsonic panel method that can handle arbitrary shed vortex wakes is used to compute the nonlinear forces and moments on simple canard-wing configurations. The lifting surfaces and wakes are represented by doublet panels. The Mangler-Smith theory is used to provide an initial estimate for the vortex sheet shed from the leading edge. The trailing-edge wake and the leading-edge wake downstream of the trailing edge are assumed to be straight and leave the trailing edge at an angle of alpha/2. Results indicate good agreement with experimental data up to 40 degs angle of attack.

Desilva, B. M. E.↗
NASA NTRS1979

Vortex pattern development on the upper surface of a swept wing at high angle of attack

An experimental study, based on a swept wing, was undertaken in the water tunnel and the wind tunnel at low speeds, with a view to improving the understanding of the intervening phenomena and to make easier their modelling. The vortex flow effects on the wing are first illustrated from global effort measurements and static pressure distributions. The domain of existence of this type of flow is deduced as a function of both sweep angle and angle of attack. By a phenomenological study in the water tunnel, an attempt is made to describe the physical pattern of the vortex flow, from its formation near the apex to its breakdown at the trailing edge. Lastly, by means of a clinometric probe, the flow field over the wing is determined.

Mirande, J.↗
NASA NTRS1979

Numerical simulation of supersonic cone flow at high angle of attack

A conical symmetry assumption is applied to the full Navier-Stokes equations resulting in an equation set containing time and two coordinate directions as independent variables. The set is integrated by use of a finite difference technique for the particular case of sharp cones at incidence. Solutions are obtained and compared with experiment for auxiliary conditions corresponding to both laminar and turbulent flows. Closure for the turbulent flow case is provided by use of a scalor eddy viscosity model based on the mixing length hypothesis. Modifications to the eddy viscosity model were found which led to excellent surface pressure and surface flow direction agreement for turbulent flow at low supersonic Mach numbers. It is apparent that further work on the turbulence model is necessary for agreement at higher supersonic Mach numbers.

Mcrae, D. S.↗
NASA NTRS1979

Prediction of aerodynamic characteristics for slender bodies alone and with lifting surfaces to high angles of attack

A method is presented for computing normal force and pitching moment coefficients for slender bodies of circular and noncircular cross section alone and with lifting surfaces. A semiempirical term representing viscous-separation crossflow is added to a term representing potential-theory crossflow. For bodies of revolution, computed aerodynamic characteristics agree with measured results for investigated free-stream Mach numbers from 0.6 to 2.9 and for angles of attack from 0 deg to 180 deg. For bodies of elliptic cross section, measured results are predicted well over the investigated Mach number range from 0.6 to 2.0 and the angle range from 0 deg to 60 deg. For all bodies the predictions are best at supersonic Mach numbers. For body-wing and body-wing-tail configurations, measured normal force coefficients and centers are predicted at the upper test Mach number of 2.0. As the Mach number is decreased to 0.6, the agreement for the normal-force coefficients rapidly deteriorates. When model flow-separation and vortex patterns are asymmetric, undesirable side forces are usually measured on the models at subsonic Mach numbers and zero sideslip angle. Generally, the side-force coefficients decrease or vanish with: increase in Mach number, decrease in nose fineness ratio, nose blunting, and flattening of body cross section.

Jorgensen, L. H.↗
NASA NTRS1979

Prediction of aerodynamic characteristics of cruciform missiles to high angles of attack

A comprehensive method has been developed to predict the static aerodynamic characteristics of missiles with one or two sets of cruciform fins. The method, utilizing a data base augmented by analysis, is applicable over the Mach number range 0.8 to 3.0 and for angles of attack from 0 to 45 deg. Arbitrary bank angles and control deflections are allowed. Loads are calculated on each component of the missile and include effects of body and fin vortices. Comparison with data shows good agreement over a wide range of flight conditions.

Smith, C. A.↗