Search NASA⌕ Search

SEARCH · Search NASA

Results for “Multilayer”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13

A diffusion-limited reaction model for self-propagating Al/Pt multilayers with quench limits

A diffusion-limited reaction model was calibrated for Al/Pt multilayers ignited on oxidized silicon, sapphire, and tungsten substrates, as well as for some Al/Pt multilayers ignited as free-standing foils. The model was implemented in a finite element analysis code and used to match experimental burn front velocity data collected from several years of testing at Sandia National Laboratories. Moreover, both the simulations and experiments reveal well-defined quench limits in the total Al + Pt layer (i.e., bilayer) thickness. At these limits, the heat generated from atomic diffusion is insufficient to support a self-propagating wave front on top of the substrates. Quench limits for reactive multilayers are seldom reported and are found to depend on the thermal properties of the individual layers. Here, the diffusion-limited reaction model is generalized to allow for temperature- and composition-dependent material properties, phase change, and anisotropic thermal conductivity. Utilizing this increase in model fidelity, excellent overall agreement is shown between the simulations and experimental results with a single calibrated parameter set. However, the burn front velocities of Al/Pt multilayers ignited on tungsten substrates are over-predicted. Finally, possible sources of error are discussed and a higher activation energy (from 41.9 kJ/mol.at. to 47.5 kJ/mol.at.) is shown to bring the simulations into agreement with the velocity data observed on tungsten substrates. Finally, this higher activation energy suggests an inhibited diffusion mechanism present at lower heating rates.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Design of multilayer-based diagnostics for measurement of high energy x rays and gamma rays

We investigate several possible multilayer-based optic designs for future hard x-ray and gamma ray diagnostics, including the detection and measurement of the positron annihilation radiation at 511 keV. The focus is set on increasing the photon efficiency and signal-to-noise ratio, compared to a previous multilayer-based system that was successfully employed to measure spectra in the 55 keV–100 keV range. Several possible designs using multilayer coatings are discussed, including mirror-based optics and multilayer Laue lenses.

Burcklen, C. (ORCID:0000000271566357)↗

Effects of diffusion barriers on reaction wave stability in Co/Al reactive multilayers

Bimetallic, reactive multilayers are uniformly structured materials composed of alternating sputter-deposited layers that may be ignited to produce self-propagating mixing and formation reactions. These nanolaminates are most commonly used as rapid-release heat sources. The specific chemical composition at each metal/metal interface determines the rate of mass transport in a mixing and formation reaction. The inclusion of engineered diffusion barriers at each interface will not only inhibit solid-state mixing but also may impede the self-propagating reactions by introducing instabilities to wavefront morphology. Here, this work examines the effect of adding diffusion barriers on the propagation of reaction waves in Co/Al multilayers. The Co/Al system has been shown to exhibit a reaction propagation instability that is dependent on the bilayer thickness, which allows for the occurrence of unstable modes in otherwise stable designs from the inclusion of diffusion barriers. Based on the known stability criteria in the Co/Al multilayer system, the way in which the inclusion of diffusion barriers changes a multilayer's heat of reaction, thermal conductivity, and material mixing mechanisms can be determined. These factors, in aggregate, lead to changes in the wavefront velocity and stability.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Measurements of the inert Hugoniot and observation of mechanical ignition in Ni(V) + Al reactive multilayers via x-ray diffraction

This study investigates the inert Hugoniot response, mechanical ignition, and reaction dynamics of Ni(V)+Al multilayers during longitudinal, laser-driven shock compression experiments. Ni(V)+Al multilayers, known for their self-propagating exothermic reactions, were subjected to longitudinal stresses exceeding 50 GPa using the laser shock facility within the Dynamic Compression Sector (DCS) at the Advanced Photon Source (APS). In situ x-ray diffraction (XRD) revealed that Ni(V) and Al were not in equilibrium during compression, with stress discrepancies attributed to twinning, grain structure effects, and/or dislocation density. However, the measured inert Hugoniot closely matched prior experimental and computational studies, confirming the utility of XRD for measuring the equation of state of thin, complex materials. Additionally, reaction was observed at significantly higher stresses than reported previously using laser-launched flyers. This discrepancy suggests a strong influence of externally imposed shear stress on reaction thresholds, which likely arose from deviations in flyer planarity during past experiments. Full reaction of the multilayer occurred within 40 ns after shock-wave passage, evidenced by complete melting of the constituents. Eulerian hydrocode simulations replicated experimental conditions, providing insights into equilibrium dynamics and experimental artifacts. The results highlight how even small shear forces facilitate ignition in Ni(V)+Al multilayers at lower stresses.

Crystallography↗

Measurements of reflection spectra of soft X-ray multilayer mirrors using a broadband laser-plasma radiation source

The reflection spectra of several concave (spherical and parabolic) periodic Mo/Si, Mg/Si, and Al/Zr multilayer mirrors intended for cosmic experiments were studied with the help of a laser-plasma soft X-ray radiation source. An investigation was made of the reflection spectra of a laboratory aperiodic Mo/Si multilayer mirror optimised for maximum uniform reflectivity in the 125-250-A range. 'Satellites' were observed in the neighbourhood of the principal peak in the spectrum of the periodic 132-A multilayer mirror. High-intensity second-order interference reflection peaks at wavelengths of about 160 A were experimentally revealed in the reflection spectra of the periodic Mo/Si 304-A mirrors. By contrast, the second-order reflection peak is substantially depressed in the spectra of the narrow-band mirrors based on the Mg/Si multilayer structure. The experimental data are compared with theoretical calculations. Manifestations of the NEXAFS structure of the L{sub 2,3} absorption edges of Al and Al{sub 2}O{sub 3} were observed in the spectra recorded. (resonators and mirrors)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Aperiodic normal-incidence antimony-based multilayer mirrors in the 8 - 13-nm spectral range

The optical properties of several materials were analysed from the standpoint of fabrication of broadband normal-incidence multilayer mirrors possessing maximal uniform reflectivity in the 8-13-nm range. By solving the inverse problem of multilayer optics we show that aperiodic Sb/(B{sub 4}C, Sc, Si) multilayer structures optimised for maximum uniform reflectivity in the 8-13-nm range are able to afford a normal-incidence reflectivity R{approx}10 % throughout this range. The best results are exhibited by the pair Sb/B{sub 4}C, for which the average reflection coefficient amounts to about 13%. The dependence of optimisation result on the programmable limitation on the minimal layer thickness in the multilayer structure was numerically investigated. An empirical rule was established whereby setting the lower bound for a layer thickness at a level {approx}{lambda}{sub min}/4 (in this case, {lambda}{sub min} = 8 nm) does not result in an appreciable lowering of attainable uniform reflectivity. (quantum electronic devices)

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Features of multilayer mirror application for focusing and collimating X-rays from inverse Compton scattering sources

We have analysed the use of X-ray interference multilayer mirrors as the elements of a focusing scheme for a compact source based on inverse Compton scattering. An algorithm is proposed for selecting mirror parameters, which takes into account the properties of the radiation source. The dependence of wavelength on the viewing angle and the energy line broadening for a fixed viewing angle are found to be the main limitations in the use of multilayer mirrors. Efficient radiation collection calls for the application of broadband mirrors. It is shown that the efficiency of multilayer mirrors in a Kirkpatrick – Baez X-ray focusing setup exceeds that of total external reflection mirrors by an order of magnitude, and that stack multilayer mirrors offer a small advantage over the periodic ones. The overall efficiency of source radiation collection in the photon energy range ΔE = 10 – 12 keV amounts to 12 % for the two-mirror Kirkpatrick – Baez setup. For a spectral region with a bandwidth ΔE/E = 3 %, the efficiency ranges up to 69 %. (paper)

07 ISOTOPE AND RADIATION SOURCES↗

Limiting spectral and angular characteristics of multilayer relief – phase diffraction microstructures

Methods for estimating the parameters of relief – phase diffraction microstructures (local and integral Q-factors) are extended to the case of multilayer double-relief sawtooth microstructures, which makes it possible to select the best combinations of optical materials for multilayer microstructures at a very low computational burden. An approach to the study of multilayer microstructures is proposed, based on the combined use of Q-factors and the method of rigorous analysis of coupled waves, which allows one to estimate the limiting spectral and angular characteristics of multilayer microstructures of various types. (paper)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Evolution of topological skyrmions across the spin reorientation transition in Pt/Co/Ta multilayers

Magnetic skyrmions in multilayers are particularly appealing as next generation memory devices due to their topological compact size, the robustness against external perturbations, the capability of electrical driving and detection, and the compatibility with the existing spintronic technologies. To date, Néel-type skyrmions at room temperature (RT) have been studied mostly in multilayers with easy-axis magnetic anisotropy. Here in this paper, we systematically broadened the evolution of magnetic skyrmions with sub-50-nm size in a series of Pt/Co/Ta multilayers where the magnetic anisotropy is tuned continuously from easy axis to easy plane by increasing the ferromagnetic Co layer thickness. The existence of nontrivial skyrmions is identified via the combination of in situ Lorentz transmission electron microscopy (L-TEM) and Hall transport measurements. A high density of magnetic skyrmions over a wide temperature range is observed in the multilayers with easy-plane anisotropy, which will stimulate further exploration for new materials and accelerate the development of skyrmion-based spintronic devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Multilayer, Multimaterial Thermal Barrier Coating Systems: Design, Synthesis, and Performance Assessment

Thermal barrier coatings ( TBC s) are increasingly playing a vital role in enhancing efficiency and performance of gas turbine engines. As engine operating temperatures rise, yttria‐stabilized zirconia ( YSZ ), the currently principal TBC material, reaches its operational limits. Gadolinium Zirconate ( GDZ )‐based pyrochlore oxides are now emerging contenders, not only due to their lower thermal conductivity, but also their ability to resist attack by silicate deposits. However, GDZ cannot be directly substituted for YSZ due to its incompatibility with the thermally grown alumina layer, therefore requiring to be a component of multilayer system. Although industry has already adopted these materials in various applications, a number of fundamental issues arise with respect to layered‐coating design, their properties and processing dependence. In this study several multilayer architectures, based on the YSZ – GDZ system, have been developed and tested for durability under furnace thermal cycling conditions. Coating designs considered optimization of microstructure and properties of individual layers based on their location within the top‐coat thickness to address competing interests of thermal conductivity, compliance, and resistance to silicates. A large variance in durability was observed in coatings made with different multilayer designs. The results and the associated failure mechanisms are rationalized through preliminary evaluation of elastic energies at the failure locations and corresponding energy release rates. The results point to new strategies in the design and manufacturing of optimal multilayer coatings.

Viswanathan, Vaishak↗

Experimental study of Cr/Sc multilayer mirrors for the nitrogen K{sub {alpha}}-emission line

The authors present an experimental study of Cr/Sc multilayer mirrors optimized for the detection of the nitrogen K{sub {alpha}}-emission line ({lambda}=3.16 nm) at a grazing incidence around 23 deg., for electron probe microanalysis applications. The multilayers were deposited onto silicon substrates using a dc magnetron sputtering system. They were characterized with grazing incidence copper K{sub {alpha}} x-ray reflectometry and atomic force microscopy, as well as with at-wavelength reflectometry using synchrotron radiation. These various characterization methods pointed out that the interfacial roughness of these multilayers increases drastically with the number of bilayers. Growth parameters were then optimized, and it is shown that the structure and reflectivity of such multilayers can be considerably improved by optimizing the sputter gas pressure during the deposition process. Reflectivity higher than 37% were measured at 22.3 deg. grazing angle for the nitrogen K{sub {alpha}}-emission line.

36 MATERIALS SCIENCE↗

Single-chamber plasma enhanced chemical vapor deposition of transparent organic/inorganic multilayer barrier coating at low temperature

Deposition of organic/inorganic multilayers is usually carried out by two different process steps by two different deposition methods. A single-chamber process for the deposition of multilayer stacks can make the process and deposition system simpler. In this work, SiOCH and plasma-polymerized methylcyclohexane (pp-MCH) films and their multilayer stacks for application to transparent diffusion barrier coatings were deposited in a single low-temperature plasma enhanced chemical vapor deposition reactor using hexamethyldisilazane/N{sub 2}O/O{sub 2}/Ar and methylcyclohexane/Ar mixtures for SiOCH and pp-MCH layers, respectively. The deposition rates of the SiOCH and pp-MCH layers were increased with increasing the N{sub 2}O:O{sub 2} gas flow ratio and rf plasma power, respectively. Oxygen concentration in the SiOCH films was decreased and carbon and hydrogen incorporation was increased when increasing the N{sub 2}O:O{sub 2} gas flow ratio from 0:1 to 3:1. In this work, the water vapor transmission rate of polyester sulfone substrate could be reduced from a level of 50 (bare substrate) to 0.8 g/m{sup 2} day after deposition of a pp-MCH/SiOCH/pp-MCH multilayer coating.

36 MATERIALS SCIENCE↗

Synthesis of nanoscale CN{sub x}/TiAlN multilayered coatings by ion-beam-assisted deposition

CN{sub x}/TiAlN multilayered coatings with different nanoscale modulation periods and ratio of CN{sub x} within each period were prepared by ion-beam-assisted deposition at room temperature. Auger electron spectroscopy (AES), x-ray diffraction (XRD), and nanoindenter and a profiler were used to characterize the microstructure and mechanical properties of the coatings. The low-angle XRD pattern and AES indicated a well-defined multilayered structure of the coating. Although monolithic CN{sub x} and TiAlN coatings formed amorphous and nanocrystalline structures, respectively, the CN{sub x}/TiAlN multilayers exhibited coherent epitaxial growth due to the mutual growth-promoting effect at small CN{sub x} layer thickness (<0.6 nm). At modulation period {lambda}=2.83 nm and CN{sub x} thickness of 10% within each period, the multilayers exhibited strong TiAlN (111) and weak AlN (111) textures and showed the highest hardness (32 GPa), elastic modulus (409 GPa), and critical fracture load (65.7 mN)

36 MATERIALS SCIENCE↗

Structure and mechanical properties of nanoscale multilayered CrN/ZrSiN coatings

Nanocrystalline/amorphous CrN/ZrSiN multilayer coatings with a bilayer thickness ranging from 11 to 153 nm were prepared by reactive magnetron sputtering technique. The microstructure and mechanical properties of these thin films were characterized by x-ray diffraction (XRD), scanning electron microscopy, transmission electron microscopy (TEM), Fourier transform infrared spectroscopy (FTIR), and nanoindentation. The formation of nanocrystalline CrN and nanocomposite ZiSiN in the single layer coatings was identified by XRD and FTIR. The periodic structure of the as-deposited multilayer coatings was confirmed by TEM observation. Nanoindentation tests showed that both the values of hardness (H) and reduced elastic modulus (E{sub r}) of CrN/ZrSiN multilayers remained almost constant despite varying the bilayer thickness. The multilayer coatings exhibited higher H of 30 GPa and higher resistance to plastic deformation when compared to the single layer CrN and ZrSiN coatings.

36 MATERIALS SCIENCE↗

Characterization of Mo/Si multilayer growth on stepped topographies

Mo/Si multilayer mirrors with nanoscale bilayer thicknesses have been deposited on stepped substrate topographies, using various deposition angles. The multilayer morphology at the stepedge region was studied by cross section transmission electron microscopy. A transition from a continuous- to columnar layer morphology is observed near the step-edge, as a function of the local angle of incidence of the deposition flux. Taking into account the corresponding kinetics and anisotropy in layer growth, a continuum model has been developed to give a detailed description of the height profiles of the individual continuous layers. Complementary optical characterization of the multilayer system using a microscope operating in the extreme ultraviolet wavelength range, revealed that the influence of the step-edge on the planar multilayer structure is restricted to a region within 300 nm from the step-edge.

36 MATERIALS SCIENCE↗

Transmission electron microscopy of multilayer thin films.

The unique geometry of multilayer thin films, with layer thicknesses on the nanoscale, gives rise to a wide range of novel properties and behavior that are not observed in the bulk. The novel behavior is critically dependent on the microstructure of the films. This paper reviews the use of a range of transmission electron microscopy (TEM) techniques to elucidate the structure, chemistry, and properties of multilayer thin films. The paper includes a brief introduction to the technological applications to which multilayer thin films are suited, followed by a description of the various TEM techniques. The final section of the paper presents the application of these techniques to various multilayer thin film systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Impact of high refractive coating material on the nodular-induced electric field enhancement for near infrared multilayer mirrors

Electric field enhancement due to nodular defects within quarter-wave optical thickness multilayer mirrors is impacted by the inclusion diameter, inclusion depth, inclusion composition, nodular shape, multilayer angular bandwidth, multilayer coating materials, number of layers, angle of incidence, and polarization. In this study, the electric field enhancement for surface inclusions with diameters up to 2 µm irradiated at 1064 nm at either normal or 45 deg incidence is calculated for high refractive index materials over a refractive index range of 1.7–2.3 for oxide materials commonly used in the near infrared. The thicknesses of the multilayer mirror thin films are determined for each high refractive index material by a requirement to meet a 99.5% reflection. The refractive index was found to have a significant impact on the electric field enhancement, which may offer some insight into the optimal material choice to produce high laser damage threshold mirrors.

36 MATERIALS SCIENCE↗

Triple-wavelength, narrowband Mg/SiC multilayers with corrosion barriers and high peak reflectance in the 25-80 nm wavelength region

We have developed new, corrosion-resistant Mg/SiC multilayer coatings which can be used to efficiently and simultaneously reflect extreme ultraviolet (EUV) radiation in single or multiple narrow bands centered at wavelengths in the spectral region from 25 to 80 nm. Corrosion mitigation is achieved through the use of partially amorphous Al-Mg thin layers. Three different multilayer design concepts were developed and deposited by magnetron sputtering and the reflectance was measured at near-normal incidence in a broad spectral range. Unprotected Mg/SiC multilayers were also deposited and measured for comparison. They were shown to efficiently reflect radiation at a wavelength of 76.9 nm with a peak reflectance of 40.6% at near-normal incidence, the highest experimental reflectance reported at this wavelength for a narrowband coating. The demonstration of multilayer coatings with corrosion resistance and multiplewavelength EUV performance is of great interest in the development of mirrors for space-borne solar physics telescopes and other applications requiring long-lasting coatings with narrowband response in multiple emission lines across the EUV range.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗