Search NASA⌕ Search

SEARCH · Search NASA

Results for “PURE STATES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Investigation of MgO additives on microstructure and properties of thin LLZO electrolytes for all-solid-state batteries

To realize high-energy density lithium lanthanum zirconate (LLZO)-based solid-state batteries (SSB), LLZO electrolytes should be fabricated with low thickness and high mechanical strength. An effective strategy for strengthening ceramic materials is to use additives. Here, we employed MgO nanopowders and fibers as additives for the thin LLZO electrolyte in order to improve the mechanical strength. The microstructure, mechanical properties, and electrochemical properties are characterized to investigate the effects of adding MgO and sintering time. The MgO remains at grain boundaries after sintering, making the microstructure of LLZO fine and uniform. The mechanical strength of the MgO-added LLZO was enhanced by more than 60% while maintaining high ionic conductivity (1 × 10 -4 S cm -1 ) at room temperature. Li symmetric cells using the MgO fiber–LLZO and MgO powder–LLZO exhibit 2 and 3 times higher critical current density (CCD) than those of pure LLZO, and a solid-state full cell exhibits stable cycling performance. Further, these results demonstrate that the use of MgO nanopowder or fiber as an additive for thin LLZO is beneficial for high-current density cycling, by improving mechanical properties and microstructure.

25 ENERGY STORAGE↗
DOE OSTI2024

Overview of recent experimental results on the EAST Tokamak

Since the last IAEA-FEC in 2021, significant progress on the development of long pulse steady state scenario and its related key physics and technologies have been achieved, including the reproducible 403 s long-pulse steady-state H-mode plasma with pure radio frequency (RF) power heating. A thousand-second time scale (~1056 s) fully non-inductive plasma with high injected energy up to 1.73 GJ has also been achieved. The EAST operational regime of high β P has been significantly extended (H 98y2 > 1.3, β P ~ 4.0, β N ~ 2.4 and n e /n GW ~ 1.0) using RF and neutral beam injection (NBI). The full edge localized mode suppression using the n = 4 resonant magnetic perturbations has been achieved in ITER-like standard type-I ELMy H-mode plasmas with q 95 ≈ 3.1 on EAST, extrapolating favorably to the ITER baseline scenario. The sustained large ELM control and stable partial detachment have been achieved with Ne seeding. The underlying physics of plasma-beta effect for error field penetration, where toroidal effect dominates, is disclosed by comparing the results in cylindrical theory and MARS-Q simulation in EAST. Breakdown and plasma initiation at low toroidal electric fields (<0.3 V m -1 ) with EC pre-ionization is developed. A beneficial role on the lower hybrid wave injection to control the tungsten concentration in the NBI discharge is observed for the first time in EAST suggesting a potential way toward steady-state H-mode NBI operation.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Emergence of 4 H $J^π$ = 1 - resonance in contact theories

We obtain the s- and p-wave low-energy scattering parameters for n 3 H elastic scattering and the position of the 4 H J π = 1 - resonance using the pionless effective field theory at leading order. Results are extracted with three numerical techniques: confining the system in a harmonic oscillator trap, solving the Faddeev-Yakubovsky equations in configuration space, and using an effective two-body cluster approach. The renormalization of the theory for the relevant amplitudes is assessed in a cutoff-regulator range between 1 fm -1 and 10 fm -1 . Most remarkably, we find a cutoff-stable/RG-invariant resonance in the 4 H J π = 1 - system. This p-wave resonance is a universal consequence of a shallow two-body state and the introduction of a three-body s-wave scale set by the triton binding energy. The stabilization of a resonant state in a few-fermion system through pure contact interactions has a significant consequence for the powercounting of the pionless theory. Specifically, it suggests the appearance of similar resonant states also in larger nuclei, like 16-oxygen, in which the theory’s leading order does not predict stable states. Those resonances would provide a starting state to be moved to the correct physical position by the perturbative insertion of sub-leading orders, possibly resolving the discrepancy between data and contact EFT.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2020

Efficient and robust stability analysis in the internal energy, volume, and moles (UVN) space

Hydrodynamic simulation of fluids in vessels is often based on the internal energy (U), volume (V), and the number of moles of all components ( re N = N 1 , N 2 , ..., N n ) as the working variables to determine the thermodynamic state by finding the global maximum of entropy. The procedure of finding the equilibrium state may be divided into two steps: stability analysis and phase-split computations. Stability analysis is performed first, and the phase-split computation proceeds if the system is unstable. Most of the past work on UVN space has been based on phase-split computations, while the stability analysis is barely investigated. Furthermore, previous studies for the stability analysis use only Newton's method to solve the non-linear algebraic equations. We present an efficient and robust approach for stability analysis where UVN is specified. The successive substitution iteration (SSI) is used to provide good initial guesses for Newton's method. The proposed approach results in a reduced number of unknowns and does not require a large number of iterations to achieve convergence in Newton's method. Overall, our proposed formulation is compatible with different equations of state and is applicable to both pure component and multi-components. The robustness and efficiency of the algorithm for stability analysis are demonstrated in various examples.

02 PETROLEUM↗
DOE OSTI2021

On the interactions between molten aluminum and high entropy alloy particles during aluminum matrix composite processing

The feasibility of adding AlCrTiV high entropy alloy (HEA) particles to molten aluminum to make metal matrix composites was studied. Equiatomic AlCrTiV HEA particles, produced by a solid state reduction process, were dispersed into pure aluminum and 7075 alloy (Al-5.8Zn-2.3Mg-1.4Cu, all weight %) melt and by a ultrasonic dispenser. It was found that the AlCrTiV particles reacted with molten aluminum, leading to the formation of Al 45 (Cr,V) 7 and Al 3 Ti intermetallic phases in the aluminum matrix composites. Although the AlCrTiV HEA particles did not survive in molten aluminum during composite processing, the final composite materials showed significantly improved mechanical properties, due to grain refinement and dispersion strengthening. Finally, the research suggests that the interactions between matrix aluminum alloys and the particles are key in controlling the final microstructure and properties of the composites.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Ultrafast visualization of incipient plasticity in dynamically compressed matter

Plasticity is ubiquitous and plays a critical role in material deformation and damage; it inherently involves the atomistic length scale and picosecond time scale. A fundamental understanding of the elastic-plastic deformation transition, in particular, incipient plasticity, has been a grand challenge in high-pressure and high-strain-rate environments, impeded largely by experimental limitations on spatial and temporal resolution. Here, we report femtosecond MeV electron diffraction measurements visualizing the three-dimensional (3D) response of single-crystal aluminum to the ultrafast laser-induced compression. We capture lattice transitioning from a purely elastic to a plastically relaxed state within 5 ps, after reaching an elastic limit of ~25 GPa. Our results allow the direct determination of dislocation nucleation and transport that constitute the underlying defect kinetics of incipient plasticity. Large-scale molecular dynamics simulations show good agreement with the experiment and provide an atomic-level description of the dislocation-mediated plasticity.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Nuclear energy density functionals grounded in ab initio calculations

Here, we discuss the construction of a nuclear energy density functional (EDF) from ab initio computations and advocate the need for a methodical approach that is free from ad hoc assumptions. The equations of state (EoSs) of symmetric nuclear and pure neutron matter are computed using the chiral NNLO sat and the phenomenological AV4' + UIX c Hamiltonians as inputs to self-consistent Green's function (SCGF) and auxiliary field diffusion Monte Carlo (AFDMC) methods. We propose a convenient parametrization of the EoS as a function of the Fermi momentum and fit it on the SCGF and AFDMC calculations. We apply the ab initio based EDF to carry out an analysis of the binding energies and charge radii of different nuclei in the local density approximation. The NNLO sat -based EDF produces encouraging results, whereas the AV4' + UIX c -based one is farther from experiment. Possible explanations of these different behaviors are suggested, and the importance of gradient and spin-orbit terms is analyzed. Our paper paves the way for a practical and systematic way to merge ab initio nuclear theory and density functional theory, while shedding light on some critical aspects of this procedure.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2025

Myths of nuclear graphite in World War II, with original translations

We re-examine a common narrative that experimental errors by Walther Bothe in 1941 led Germany to abandon graphite as a reactor moderator during World War II. Using document-based nuclear archaeology, we first show that both American and German scientists used an incorrect carbon scattering cross section, thereby undermining the accuracy of all wartime data, including their conclusions on carbon’s absorption. Moreover, we argue that the availability of exceptionally pure petroleum coke in the United States, rather than any academic breakthrough, decisively enabled their production of nuclear-grade graphite. In contrast, Bothe’s Siemens electrographite had more boron contamination than any graphites considered in Fermi’s experiments, rendering it genuinely impractical as a moderator. By reframing the decision to eschew graphite as a deliberate decision rather than a mere experimental oversight, we believe the German decision was a rational consequence of material constraints and wartime priorities.

42 ENGINEERING↗
DOE OSTI2022

Ancilla-free continuous-variable SWAP test

We propose a continuous-variable (CV) SWAP test that requires no ancilla register, thereby generalizing the ancilla-free SWAP test for qubits. In this ancilla-free CV SWAP test, the computational basis measurement is replaced by photon number-resolving measurement, and we calculate an upper bound on the error of the overlap estimate obtained from a finite Fock cutoff in the detector. As an example, we show that estimation of the overlap of pure, centered, single-mode Gaussian states of energy E and squeezed in opposite quadratures can be obtained to error ϵ using photon statistics below a Fock basis cutoff O(Elnϵ –1 ). This cutoff is greatly reduced to E + O(√ Elnϵ –1 ) when the states have rapidly decaying Fock tails, such as coherent states. We show how the ancilla-free CV SWAP test can be extended to many modes and applied to quantum algorithms such as variational compiling and entanglement spectroscopy in the CV setting. For the latter we also provide a new algorithm which does not have an analog in qubit systems. The ancilla-free CV SWAP test is implemented on Xanadu's 8-mode photonic processor in order to estimate the vacuum probability of a two-mode squeezed state.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
NASA NTRS1978

Preliminary environmental assessment for the Satellite Power System (SPS). Volume 2: Detailed assessment

Volume 2 provides a preliminary assessment of the impact of the Satellite Power System (SPS) on the environment in a technically detailed format more suitable for peer review than the executive summary of Vol. 1. It serves to integrate and assimilate information that has appeared in documents referenced herein and to focus on issues that are purely environmental. It discloses the state-of-knowledge as perceived from recently completed DOE-sponsored studies and defines prospective research and study programs that can advance the state-of-knowledge and provide an expanded data base for use in an assessment planned for 1980. Alternatives for research that may be implemented in order to achieve this advancement are also discussed.

Source record↗
NASA NTRS1988

Space telerobots and planetary rovers

Space telerobots and planetary rovers are advanced forms of space automation that are being studied for missions beginning in the 1990s. This paper describes telerobots and planetary rovers, points out that pure autonomy is far beyond the state of the art, and goes on to discuss how useful, realizable telerobots and rovers can be developed in the context of human-machine systems. Telerobot and rover computational and architectural requirements are also briefly examined, and examples of current work, including the development of dedicated analog processing chips based upon neural networks are described. The paper closes with some speculations on the terrestrial implications of space robotics and some general conclusions.

Ruoff, Carl F.↗
NASA NTRS1991

Integrity and security in an Ada runtime environment

A review is provided of the Formal Methods group discussions. It was stated that integrity is not a pure mathematical dual of security. The input data is part of the integrity domain. The group provided a roadmap for research. One item of the roadmap and the final position statement are closely related to the space shuttle and space station. The group's position is to use a safe subset of Ada. Examples of safe sets include the Army Secure Operating System and the Penelope Ada verification tool. It is recommended that a conservative attitude is required when writing Ada code for life and property critical systems.

Bown, Rodney L.↗
NASA NTRS1992

Hydroxyl X2Pi pure rotational transitions

We present a list of frequencies, term values, Einstein A values, and assignments for the pure rotational transitions of the X2Pi state of the OH molecule. This list includes transitions from 3 to 2015/cm for Delta-v = 0, v-double-prime = 0-4, and J-double-prime = 0.5-49.5. The A values were computed using recent advances in calculating wave functions for a coupled system and an experimentally derived electric dipole moment function (Nelson et al., 1990) which exhibits curvature.

Goorvitch, D.↗
NASA NTRS1995

A universal steady state I-V relationship for membrane current

A purely electrical mechanism for the gating of membrane ionic channel gives rise to a simple I-V relationship for membrane current. Our approach is based on the known presence of gating charge, which is an established property of the membrane channel gating. The gating charge is systematically treated as a polarization of the channel protein which varies with the external electric field and modifies the effective potential through which the ions migrate in the channel. Two polarization effects have been considered: 1) the up or down shift of the whole potential function, and 2) the change in the effective electric field inside the channel which is due to familiar effect of the effective reduction of the electric field inside a dielectric body because of the presence of surface charges on its surface. Both effects are linear in the channel polarization. The ionic current is described by a steady state solution of the Nernst-Planck equation with the potential directly controlled by the gating charge system. The solution describes reasonably well the steady state and peak-current I-V relationships for different channels, and when applied adiabatically, explains the time lag between the gating charge current and the rise of the ionic current. The approach developed can be useful as an effective way to model the ionic currents in axons, cardiac cells and other excitable tissues.

NASA Discipline Regulatory Physiology↗
NASA NTRS2009

Symbolic Processing Combined with Model-Based Reasoning

A computer program for the detection of present and prediction of future discrete states of a complex, real-time engineering system utilizes a combination of symbolic processing and numerical model-based reasoning. One of the biggest weaknesses of a purely symbolic approach is that it enables prediction of only future discrete states while missing all unmodeled states or leading to incorrect identification of an unmodeled state as a modeled one. A purely numerical approach is based on a combination of statistical methods and mathematical models of the applicable physics and necessitates development of a complete model to the level of fidelity required for prediction. In addition, a purely numerical approach does not afford the ability to qualify its results without some form of symbolic processing. The present software implements numerical algorithms to detect unmodeled events and symbolic algorithms to predict expected behavior, correlate the expected behavior with the unmodeled events, and interpret the results in order to predict future discrete states. The approach embodied in this software differs from that of the BEAM methodology (aspects of which have been discussed in several prior NASA Tech Briefs articles), which provides for prediction of future measurements in the continuous-data domain.

James, Mark↗
DOE OSTI2019

Li 15 P 4 S 16 Cl 3 , a Lithium Chlorothiophosphate as a Solid-State Ionic Conductor

Tremendous efforts have been devoted to the design of solid Li + electrolytes and the development of all-solid-state batteries. Compared with conventional Li-ion batteries, which use flammable liquid organic electrolytes, all-solid-state batteries show significant advantages in safety. In this work, a novel lithium chlorothiophosphate compound, Li 15 P 4 S 16 Cl 3 , is discovered. The crystal structure and electrochemical properties are investigated. Li 15 P 4 S 16 Cl 3 can be synthesized as a pure phase via a facile solid-state reaction by heating a ball-milled mixture of Li 2 S, P 2 S 5 , and LiCl at 360 °C. The crystal structure of Li 15 P 4 S 16 Cl 3 was refined against neutron and synchrotron powder X-ray diffraction data, revealing that it crystallizes in the space group $I\bar{4}3d$. Furthermore, the Li + transport in Li 15 P 4 S 16 Cl 3 was also investigated by multiple solid-state NMR methods, including variable-temperature NMR line-shape analysis, NMR relaxometry, and pulsed-field-gradient NMR. Li 15 P 4 S 16 Cl 3 shows good thermodynamic stability and can be synthesized at relatively low temperature. Although it exhibits a low ionic conductivity at room temperature, it can serve as a new motif crystal structure for the design and development of new solid-state electrolytes.

25 ENERGY STORAGE↗
NASA NTRS1990

Applicability of steady models for hot-star winds

Non-Sobolev models of radiatively driven stellar winds based on a pure-absorption approximation do not have a well-defined steady state. Here the implications of this for flow time-dependence are examined, showing that, under such circumstances, instabilities in the flow attain an absolute character that leads to intrinsic variability. In this case, steady solutions are inherently inapplicable because they do not represent physically realizable states. However, for actual hot-star winds, driving is principally by scattering, not pure absorption. In practice, the relatively weak force associated with slight asymmetries in the diffuse, scattered radiation field may play a crucial role in breaking the solution degeneracy and reducing the instability from an absolute to an advective character.

Owocki, Stanley P.↗
DOE OSTI2024

Speed of Sound Measurements of R-1130(E) and an Azeotropic Blend of R-1336mzz(Z)/1130(E)

Sound speed data measured using a dual-path pulse-echo instrument are reported for pure trans-1,2-dichloroethene (R-1130(E)) and an azeotropic blend of cis-1,1,1,4,4,4-hexafluorobutene (R-1336mzz(Z)) and R-1130(E) with a composition of 74.8 mass % R-1336mzz(Z) with the balance being R-1130(E). The azeotropic blend of R-1336mzz(Z)/1130(E) is classified as R-514A in ANSI/ASHRAE standard 34. Liquid phase speed of sound data are reported from just above the saturation pressure of pure R-1130(E) or the bubble point pressure of R-514A to a maximum pressure of 26.7 MPa. The relative combined expanded uncertainty in the speed of sound varies from 0.032 % to 0.148 % with the greatest deviations occurring at the lowest sound speeds. At present, no reference Helmholtz-energy-explicit equation of state (EOS) is available for R-1130(E). Therefore, the reported data for pure R-1130(E) are compared to an extended corresponding states (ECS) model. Deviations between the pure R-1130(E) sound speed data and the ECS model were found to be consistently negative ranging between − 4.1 % and − 3.5 %. The R-514A data are compared to a multifluid model inclusive of the established reference Helmholtz-energy-explicit EOS for R-1336mzz(Z) and ECS model for R-1130(E) with estimated binary interaction parameters. Deviations between the experimental speed of sound data and the multifluid model were also found to be consistently negative. However, deviations from the multifluid model were found to be as great as − 17.1 %. The large deviations from the ECS model and multifluid model underscore the need for a robust Helmholtz-energy-explicit EOS for R-1130(E).

42 ENGINEERING↗