Search NASA⌕ Search

SEARCH · Search NASA

Results for “VAPOR PHASE EPITAXY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Optically pumped semiconductor laser based on a type-II CdS/ZnSe heterostructure

An optically pumped semiconductor laser based on a type-II CdS/ZnSe nanoheterostructure containing 10 quantum wells (QWs) was studied. The structure was grown by metal-organic vapour phase epitaxy on a GaAs substrate. The lifetime of electron-hole pairs at a low pump level was measured by luminescence decay to be ∼0 ns. The peak power of the microcavity semiconductor laser at room temperature and longitudinal pumping by a repetitively pulsed N{sub 2} laser was 7.2 W at a wavelength of 514 nm. The relatively low laser slope efficiency (0.35 %) is explained by amplified spontaneous emission propagating along the structure. The peak power and efficiency of the laser in the case of transverse pumping increase to 70 W and 3.5 %, respectively. (lasers)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2022

Using electron channeling contrast imaging to inform and improve the growth of high-efficiency GaAs solar cells on nanopatterned GaAs substrates

Patterned substrates provide opportunities for reducing the cost of high-efficiency III-V devices by incorporating mechanically weak layers beneficial for substrate reuse (e.g. by spalling). In this work, the functionality of electron channeling contrast imaging (ECCI) as a tool to efficiently understand and mitigate defect formation is exemplified by developing a process in which high-quality III-V material can be grown on nanopatterned GaAs substrates. Reactive ion etching used in the patterning process was found to damage the GaAs substrate surface, leading to the formation of stacking faults in the epitaxial material as observed by ECCI. Etching the patterned substrates in a 1 NH4OH: 1 H2O2: 50 DI H2O solution for 10 s prior to growth removed the substrate surface damage and stacking faults were no longer present. Growth of solar cell device structures initially produced samples with many macroscale flaws creating shunts in the devices, which complicated the assessment of material quality by device measurements. However, ECCI revealed that the epitaxial material surrounding macroscale flaws was free from any crystallographic defects such as stacking faults and threading dislocations. With this knowledge, we focused on refining the patterning process to eliminate the macroscale flaws. Solar cells were then grown on the improved nanopatterned substrates and exhibited device structures with defect densities less than 5 x 105 cm -2 and average conversion efficiency of 24.8%, nearly identical to devices grown on unpatterned epi-ready substrates (25.0%).

14 SOLAR ENERGY↗
DOE OSTI2023

GaAs solar cells grown on acoustically spalled GaAs substrates with 27% efficiency

Acoustic spalling presents a potentially low-cost reuse pathway for III–V epitaxial growth substrates via exfoliation of device layers with recovery and reuse of the substrate. However, surface features formed during spalling can reduce the performance of subsequently grown devices. Here, we develop an understanding of how the surface morphology of acoustically spalled substrates affects GaAs solar cell performance and develop strategies to mitigate these impacts. We demonstrate that minor planarization of the surface by wet chemical etching and/or epitaxial growth, or the redesign of the device structure to thicken critical layers, prevents performance degradation. Using these strategies, we demonstrate a 0.25 cm 2 single-junction GaAs device with 26.9% ± 0.2% photovoltaic conversion efficiency under the AM1.5G spectrum grown on an acoustically spalled substrate. These results enable the growth of high-performance III–V devices on non-traditional substrates with the potential for significantly reduced device costs.

14 SOLAR ENERGY↗
DOE OSTI2017

International Conference on Metalorganic Vapor Chase Epitaxy (ICMOVPE) XVIII

The ICMOVPE-XVIII conference created meaningful opportunities for intellectual challenge, networking opportunities, and intellectual stimulation for graduate students, Post-Doctoral Fellows and all attendees. This technical and social program further provided many opportunities for communication, brainstorming, and transfer of information as well as the development of collaborations across many institutions and companies. We had a significant number of members of underrepresented groups in STEM attending this conference. We also are publishing the proceedings of this conference with the Journal of Crystal Growth, a journal which receives wide electronic distribution in many academic institutions world-wide, making the technical information presented at ICMOVPE-XVIII have a much broader impact than would otherwise be possible. ICMOVPE XVIII had a total of 216 presentations and of these; there were 70 Student oral or poster presentations. The funds we obtained for student support from the Department of Energy were distributed among the registered students and Post Docs to supplement the full cost of registration of $1,100 each for regular registration to the reduced rate of at $850 each for graduate students and Post Docs.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Large Area Near‐Field Thermophotovoltaics for Low Temperature Applications

Abstract Thermophotovoltaics, devices that convert thermal infrared photons to electricity, offer a key pathway for a variety of critical renewable energy technologies including thermal energy storage, waste heat recovery, and direct solar‐thermal power generation. However, conventional far‐field devices struggle to generate reasonable powers at lower temperatures. Near‐field thermophotovoltaics provide a pathway to substantially higher powers by leveraging photon tunneling effects. Here a large area near‐field thermophotovoltaic device is presented, created with an epitaxial co‐fabrication approach, that consists of a self‐supported 0.28 cm 2 emitter‐cell pair with a 150 nm gap. The device generates 1.22 mW at 460 °C, a 25‐fold increase over the same cell measured in a far‐field configuration. Furthermore, the near‐field device demonstrates short circuit current densities greater than the far‐field photocurrent limit at all the temperatures tested, confirming the role of photon tunneling effects in the performance enhancement. Modeling suggests several practical directions for cell improvements and further increases in power density. These results highlight the promise of near‐field thermophotovoltaics, especially for low temperature applications.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Single- and dual-variant atomic ordering in GaAsP compositionally graded buffers on GaP and Si substrates

Here, we investigate the material properties of GaAsP graded buffers on both GaP and Si substrates in order to determine limitations to dislocation glide in GaAsP. Phase separation is not observed in these GaAsP buffers, but CuPt B atomic ordering is present, and has an impact on the Burgers vector distribution of gliding dislocations. Tellurium surfactant eliminates ordering in GaAsP, allowing control over the glide plane distribution while highlighting the importance of the growth surface and choice of dopant. The impact of single-variant CuPtB ordering of GaAsP buffers grown on GaP substrates is investigated by monitoring the threading dislocation density throughout the buffer in sequential steps. The dislocation density rises steadily throughout the graded buffer, implying that factors other than ordering-induced glide plane switches play a dominant role in the final dislocation density. We observe an increase in surface roughness throughout the buffer and speculate that a dislocation nucleation source on the surface has a low activation energy and may lead to increased threading dislocation density. On Si substrates, the GaAsP buffer displays dual-variant CuPt B ordering rather than single-variant ordering due to the surface step geometry. We discuss how dual-variant ordering leads to a variable glide force, and thus has a different impact on dislocation dynamics than single-variant ordering. Because the III-V on Si nucleation procedure determines the step geometry, it also influences the dislocation dynamics.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Surface Conversion of Single-Crystal Bi 2 Se 3 to β-In 2 Se 3

In this work, we demonstrate that the surface layers of single-crystal layered-2D Bi 2 Se 3 can be converted to layered-2D rhombohedral ß-In 2 Se 3 by annealing under a trimethylindium (TMIn) flux. Samples were prepared in a metalorganic chemical vapor deposition (MOCVD) chamber, then transferred under vacuum to a surface analysis chamber for analysis with low-energy electron diffraction (LEED) and Auger electron spectroscopy. Additional ex situ characterization included x-ray diffraction, transmission-electron microscopy (TEM), energy dispersive x-ray spectroscopy (EDS) elemental mapping, and Raman spectroscopy. The resulting single-crystal ß-In 2 Se 3 adopts the rhombohedral crystal structure (space group R-3m) and orientation of the underlying Bi 2 Se 3 , and the excess Bi atoms generated by this process create an underlying region of Bi-rich Bi x Se y . Due to the difference in bandgap between Bi 2 Se 3 and In 2 Se 3 , this conversion reaction presents a pathway to lateral heterojunctions if only selected regions are converted by masking the surface to spatially define the TMIn exposure. The conversion may also have implications for heteroepitaxy, because the in-plane lattice constants of Bi 2 Se 3 and In 2 Se 3 (0001) surfaces match those of InP and GaAs (111), respectively, and the natural cleavage planes of a layered-2D crystal facilitate substrate removal and reuse.

14 SOLAR ENERGY↗
DOE OSTI2022

Optically thick GaInAs/GaAsP strain-balanced quantum-well tandem solar cells with 29.2% efficiency under the AM0 space spectrum

GaAs is often used as a multijunction subcell due to its high material quality on GaAs substrates, despite having a non-optimal bandgap. The bandgap can be beneficially reduced using many layers of thin, strain-balanced GaInAs in a superlattice or quantum well device, but achieving excellent carrier collection without increased recombination has proven challenging. Here, we develop and demonstrate high performance, optically thick GaInAs/GaAsP strain-balanced solar cells. Excellent material quality is achieved in thick superlattices by using growth conditions that limit progressive thickness and composition fluctuations. Bandgap-voltage offsets as low as 0.31V are shown in superlattice cells using thin, highly strained GaP barriers. Optically thick superlattice cells with over 2500 nm of total GaInAs in the depletion region are developed, enabling 3.8 mA/cm 2 of extra photocurrent beyond the GaAs band edge under the AM0 space spectrum. Optimized superlattice solar cells are incorporated into two-junction devices that achieve 29.2% efficiency under the AM0 space spectrum due to their improved bandgap combination and high subcell voltages.

14 SOLAR ENERGY↗
DOE OSTI2021

Nucleation of High-Quality GaP on Si Through V-Groove Si Substrates

III-V growth on nanopatterned v-groove Si is a promising route to low cost Si-based tandem solar cells. Here, we study a high temperature MOVPE nucleation regime for growing GaP on v-groove Si. It is shown that MOVPE growth conditions can be used to control the facet selectivity of the GaP nucleation onto the v-grooves. The most promising nucleation condition was studied further, and it was demonstrated that it can be coalesced into a smooth thin film with promising material quality.

41 EE - Solar Energy Technologies Office (EE-4S)↗
DOE OSTI2018

Formation of a Nanophase Wetting Layer and Metal Growth on a Semiconductor

Based on the data on the atomic density of a film and degree of its homogeneity during the formation of the interface between 3d transition metals (Cr, Co, Fe, or Cu) and silicon, a new concept of forming a contact between a reactive metal and a semiconductor has been justified. According to this concept, the low-temperature vapor-phase deposition of a metal onto a semiconductor is accompanied by the formation of a two-dimensional nanophase wetting layer of a metal or its mixture with silicon with a thickness of several monolayers, which significantly affects the interface formation and structure. This concept changes a perspective of forming a contact between a metal and a semiconductor substrate: it is necessary to take into account not only the formation of surface phases and clusters and/or the mixing process, but also the effect of elastic wetting of a substrate by the forming phases.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2018

Building Low-Cost, High-Efficiency Solar Cells

See how NREL scientists are revitalizing a 50-year-old technique to grow low-cost versions of high-efficiency III-V solar cells. Learn more at https://www.nrel.gov/news/features/2018/improved-way-to-make-iii-v-solar-cells-could-hold-key-to-lower-costs.html

14 SOLAR ENERGY↗
DOE OSTI2021

The Right Resources to Develop Thermophotovoltaic Technologies

Photovoltaic technologies have come a long way, but new breakthroughs are always around the corner. Thermophotovoltaics (TPV) capture heat and convert it to electricity at high efficiency. NREL is comprehensively situated to advance this new energy pathway with breakthrough potential.

14 SOLAR ENERGY↗
NASA NTRS1973

Epitaxial growth of III-V compounds for electroluminescent light sources

The epitaxial growth techniques used in the fabrication of III-V compound electroluminescent devices are reviewed. Both vapor and liquid phase epitaxial techniques are discussed, including the applications of these techniques to well established materials as well as newer materials. The state of the art of light-emitting devices fabricated from members of the III-V compounds and their solid solutions is also reviewed.

Chu, T. L.↗
NASA NTRS1987

Recent developments in indium phosphide space solar cell research

Recent developments and progress in indium phosphide solar cell research for space application are reviewed. Indium phosphide homojunction cells were fabricated in both the n+p and p+n configurations with total area efficiencies of 17.9 and 15.9% (air mass 0 and 25 C) respectively. Organometallic chemical vapor deposition, liquid phase epitaxy, ion implantation and diffusion techniques were employed in InP cell fabrication. A theoretical model of a radiation tolerant, high efficiency homojunction cell was developed. A realistically attainable AMO efficiency of 20.5% was calculated using this model with emitter and base doping of 6 x 10 to the 17th power and 5 x 10 the the 16th power/cu cm respectively. Cells of both configurations were irradiated with 1 MeV electrons and 37 MeV protons. For both proton and electron irradiation, the n+p cells are more radiation resistant at higher fluences than the p+n cells. The first flight module of four InP cells was assembled for the Living Plume Shield III satellite.

Brinker, David J.↗