SEARCH · Search NASA

Results for “availability”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13

All sources NASA NTRS DOE OSTI

DOE OSTI2024

Bubble Mass Transport Measurement in the Large-Scale Test Loops at Oak Ridge National Laboratory

Molten salts are complex fluids that incorporate multi-phase behavior depending on the chemistry and the physical properties of the entrained components. These components include the carrier salt, the actinide fuel, and fission, activation, and corrosion products, the concentrations of which depends on the burnup history of the salt. Radionuclide transport from the salt into the cover gas / off-gas system depends on volatility as predicted by thermochemistry, but data from the Molten Salt Reactor Experiment (MSRE) conducted in the late 1960s suggest that bubble formation and transport are also important. Anomalously high fractions of noble metals were found in the off-gas system and were attributed to transportation with parent salt aerosols and their association with rising noble gas bubbles. The prediction of such phenomena requires coupled neutronic, thermal hydraulic, and chemical equilibrium calculations, the framework of which is being developed within the Nuclear Energy Advanced Modeling and Simulation (NEAMS) program supported by the US Department of Energy (DOE) Office of Nuclear Energy (NE). However, separate effects tests and models of experiments using tools such as SAM and Thermochimica can guide model developers through important processes. Conversely, model development guides the choice of experiments and systems to provide data that are relevant for validation. This report describes several experiments that tracked gas transport in molten salts, ranging from small-scale systems to large-scale loops. Gas transportation in a molten salt, LiCl-KCl, has been studied using the shadowgraph technique. Sensors such as residual gas analysis, Raman spectroscopy, and laser-induced breakdown spectroscopy have been tested for off-gas measurements. These data were used to interpret how the gases move through the upstream salt / cover gas and the interface between them. Differential pressure measurements were able to detect individual gas bubbles as they popped at the liquid–gas interface. Salt aerosols were collected on a cascade impactor. Their formation was also observed directly via the shadowgraph method, and most of these aerosols were launched ballistically into the cover gas. Fine mists could also be observed. Convection currents through the salt were visualized and can be used to calculate the thermophysical properties of the salt itself. The apparatuses described in this report and in a previous work (McFarlane et al. 2023) have been commissioned and are available for use in making further measurements of salt/surrogate fission product behavior. Novel approaches using neutron imaging are planned for the study of fluoride salts, which cannot be contained in quartz, so shadowgraph visualization is not available. Bubble transport in convective flow and in a slow-moving salt column are planned. The mobile laser-induced breakdown spectroscopy (LIBS) system is available for several applications, including iodine capture in a molten hydroxide scrubber, H2 transport though molten salts to complement Raman analysis, and online tracking of salt aerosol generation, transport, and deposition. This report summarizes the findings from FY24 and the plans for FY25. The work completes milestone M2AT-24OR0702013 of the DOE-NE Advanced Reactor Technology, Molten Salt Reactor Campaign, DOE-NE-5.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

DOE OSTI2024

Bias Correcting NOAA's High-Resolution Rapid Refresh (HRRR) Wind Resource Data for Grid Integration Applications [Slides]

Many weather years of high-quality wind data are widely accepted in the grid integration community to be important for studying wind energy technical potential, energy system operations, and grid resilience. NREL makes high-quality wind and solar resource data available. NREL's Grid-Atmosphere workshop (March 2024) identified NREL National Solar Radiation Database as widely used in grid integration modeling, but there is less agreement on commonly used wind datasets. One important factor identified by ESIG's 2023 report 'Weather Dataset Needs for Planning and Analyzing Modern Power Systems' for gold standard wind data is regular updates. To address the need for regular updates, NREL's team can now process all currently available and regularly updated High-Resolution Rapid Refresh (HRRR) outputs. HRRR is an hourly-updated operational forecast product produced by the National Oceanic and Atmospheric Administration (NOAA) (Dowell et al., 2022). One barrier to NREL using HRRR is systematic bias and consistency with NREL's existing wind datasets (e.g. WIND Toolkit, 'WTK') across weather years. To address this barrier, we show that the HRRR can be interpolated and bias-corrected to be consistent with NRE's existing datasets. We call the new dataset BC-HRRR (bias-corrected HRRR). As with historical datasets like the WTK, BC-HRRR is intended for use in grid integration modeling (e.g., capacity expansion, production cost, and resource adequacy modeling). BC-HRRR's (2015-present) consistency with WTK (2007-2013) allows NREL to extend internal grid integration tooling with 15+ weather years of wind data with low-overhead extensibility to future years as they are made available by NOAA. The rest of this slide deck documents the BC-HRRR processing methods, validation, and its implications for intended use.

17 WIND ENERGY↗

DOE OSTI2025

Meteorological Services Annual Data Report for 2024

This document presents the meteorological data collected at Brookhaven National Laboratory (BNL) by Meteorological Services (Met Services) for the calendar year 2024. The purpose is to publicize the data sets available to emergency personnel, researchers and facility operations. Met services has been collecting data at BNL since 1949. Data from 1994 to the present is available in digital format. Data is presented in monthly plots of one-minute data. This allows the reader the ability to peruse the data for trends or anomalies that may be of interest to them. Full data sets are available to BNL personnel and to a limited degree outside researchers. The full data sets allow plotting the data on expanded time scales to obtain greater details (e.g., daily solar variability, inversions, etc.).

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2025

Si-Cr-Al-Mn Alloy for High Specific Resistivity

Laboratory material produced in budget period one met the target resistivity, mechanical and magnetic requirements for the Go/No-Go decision to move to industrial trials. The chosen chemistry settled on a high Cr strategy, with moderate Mn and Al additions, providing a good comprise on core loss and induction with minimal impact on mechanical properties, important to successful downstream processing. Industrial trials began in budget period two with the chosen chemistry, referred to as Alloy X. Difficulties occurred during initial hot rolling trials. Reheating the material using the standard NOES practice caused slab cracking from high thermal gradients in areas exposed to the roof burners, this was solved using a modified reheat practice. High Cr caused poor dynamic recrystallization during hot rolling, which was solved using a modified hot rolling practice. The high Cr content of the steel also caused poor decarburization during final annealing, which necessitated lowering the melt carbon aim for the final heat, together with a modified decarburization practice. Steel was finished to final thicknesses of 0.20 – 0.50 mm and evaluated for magnetic and mechanical properties. Although the target core loss for the 0.25 and 0.35 mm material was not achieved, significant reductions in high frequency core loss were measured, compared to equivalent commercially available material. Alloy X at 0.35 mm showed a 26 % and 23 % improvement at 400 HZ and 1000 Hz respectively, over Cliffs’ M-19 (0.35 mm) commercially available NOES. At 0.25 mm, Alloy X showed a 23 % and a 26 % improvement at 400 HZ and 1000 Hz respectively, over Cliffs’ HF-10 (0.25 mm) commercially available NOES. The 0.25 mm product was chosen for motor efficiency evaluation. ORNL collaborated with Cleveland-Cliffs (CC) to build, assemble, and test two 5HP motors: a baseline motor with M19 steel and a motor made with high efficiency steel (Alloy X) developed for the project. Overall, results were as expected with comparable performance at low speeds, and with more than 8% efficiency improvement for high speeds. Increased motor steel efficiency at high frequencies not only results in direct efficiency improvements but can yield reductions in motor size and cost by facilitating higher operation speeds, or by increasing the number of poles in the machine. This allows the production of more power-dense motors which are sometimes avoided with conventional material due to increased core losses. The material developed on this project provides more viable options for achieving improved motor efficiency or reduced motor size and cost.

36 MATERIALS SCIENCE↗

DOE OSTI2024

Distributed Magnetic Field and Temperature Monitoring for Superconducting Radio Frequency Cavities

The overall objective of the proposed Phase I program was to design, construct and demonstrate a fiber optic sensing system capable of providing temperature and magnetic field measurements with an enhanced spatial resolution that can be implemented over a large surface area (cryomodules) to survey superconducting radio frequency cavities and magnets. A magnetic field sensor capable of detecting fluxes on the order of 1 μT is required to detect the distribution of trapped flux on the cavity surface. A unique distributed magnetic field sensor was successfully designed and constructed to demonstrate the detection of magnetic fluxes less than 500 nT. The sensor leveraged the ultra-high sensitivity of Sentek’s picoDAS to measure the magnetostriction induced vibrations in a commercially available Metglas 2605 SC ribbon that was in physical contact with sensing fiber. Static magnetic fields were detected by applying an alternating current a copper wire proximate to the Metglas 2605SC ribbon to create an AC bias magnetic field. In an alternative approach, an AC bias magnetic field was applied to a special magnetic field sensing fiber with Metglas 2605SC cladding successfully detect a magnetic field flux of a 3 μT. Exhaustive testing was performed to characterize the dependency of sensor response on the direction of the applied magnetic field. Although the special sensing fiber based magnetic field sensor did not exhibit an observable dependence on the direction of the magnetic field, the Metglas 2605SC ribbon sensor exhibited a clear directional dependence. A wide variety of polymer materials were evaluated to enhance the temperature response of an FBG based sensor at cryogenic temperatures. The processing and performance challenges provided the motivation to develop a new simple cryogenic temperature sensor that uses a commercially available fiber optic splice protector. The EVA hot melt tube that becomes adhered to the optical fiber and the polyolefin outer tube that shrinks upon heating in the fusion splicer heater provide the high thermal expansion coefficient necessary to impart a significant strain on the FBG when exposed to cryogenic temperatures. The temperature sensitivity (Δ𝜆𝐵𝑟𝑎𝑔𝑔~ 62 𝑝𝑝𝑚/℃) of the FBG-based sensor was on par with the best reported to date. The simple design, use of readily available cost-effective materials, and well-established processing techniques lends this approach to the creation of hundreds to thousands of temperature sensors on one single optical fiber length. The inherently small form factor also allows for co-location with the distributed magnetic field sensor. In preparation for field testing of the prototype sensing system at the Jefferson Labs in potential Phase II program, several different cable designs were evaluated to package the sensors. The preliminary successful demonstration of fully functional sensing cables provides the foundation for subsequent development efforts to advance the Technology Readiness Level of the technology. The technical feasibility of the proposed approach was successfully demonstrated in this Phase I effort.

43 PARTICLE ACCELERATORS↗

DOE OSTI2025

Land of Opportunity: Potential for Renewable Energy on Federal Lands

Renewable energy (RE) in the United States has historically been deployed primarily on private lands, but the growing interest in RE development, generally across the country and specifically on federal lands, raises questions about the potential for RE on public lands. This study seeks to estimate RE technical potential on federal lands and project the amount of RE to be developed on federal lands under decarbonization scenarios for the contiguous United States. The study applied a combination of high-resolution geospatial analysis and power sector modeling and relied on multiple partner federal agencies and land administrators from the Bureau of Land Management, the U.S. Fish and Wildlife Service, the U.S. Forest Service, the U.S. Department of Defense, and the U.S. Department of Energy. In our reference siting access case, we estimate 44 million acres of federal land across the contiguous United States is potentially suitable for UPV development, which corresponds to a capacity technical potential of 5,750 gigawatts (GW) (Figure ES-1). Federal land area available for wind development is similar to UPV but wind’s generating capacity technical potential is lower (875 GW). The technical potential is estimated for two geothermal technologies, hydrothermal and enhanced geothermal systems (EGS), both of which have a smaller amount of federal land available for development (12 and 27 million acres, respectively). However, in terms of capacity, the technical potential for EGS (975 GW) is approximately equal to wind’s technical potential and there is an estimated 130 GW of hydrothermal potential. We also developed cases with more-limited land available for UPV and wind (for federal and non-federal lands) resulting in 96% reduction of wind capacity potential and 70% reduction for UPV. In a case with additional constraints applied to non-federal lands only (Limited Private), the overall (federal and non-federal) technical potential declines but the share of that technical potential on federal lands is higher than in the other siting cases. The technical potential is the maximum amount that could be developed, but only a small fraction would be developed or needed in the future. Across seven scenarios that achieve 100% carbon-free electricity by 2035, we estimate 26 GW to 270 GW of RE capacity could be deployed on federal lands by 2035. The three central scenarios have 51–84 GW of RE deployed by 2035 and requiring about 500,000 to 1,000,000 acres of total land area. Direct land consumption is less than total land use required, thus enabling co-use opportunities. The large technical potential estimates and the increasing deployment projections from the collection of scenarios show the opportunities for RE development on federal lands. Capturing these opportunities-while minimizing conflicts with other land uses, federal department or agency missions, and public interest, and simultaneously maximizing the economic, grid, and social value of the projects-would require collaborative planning among federal land administrators, grid planners, project developers, the public, and other stakeholders.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

DOE OSTI2025

Testing mechanisms of how mycorrhizal associations affect forest soil carbon and nitrogen cycling (Final Technical Report)

Trees are in a symbiotic partnership with mycorrhizal fungi in which they provide the fungi with carbon from photosynthesis and the fungi provide the trees with nutrients and water. In temperate forests, the vast majority of trees form symbioses with one of two types of mycorrhizal fungi—arbuscular mycorrhizal (AM) fungi or ectomycorrhizal (EcM) fungi. These fungi differ in their morphology, hyphal length, and nutrient acquisition strategies. Many studies have found systematic differences in soil organic matter and nitrogen availability between forest stands dominated by AM-associating trees versus EcM-associating trees. For instance, there is a larger proportion of organic matter that is mineral-associated, more available nitrogen, and lower soil carbon to nitrogen ratios in AM forest stands relative to EcM forests stands. However, the mechanisms driving these patterns are not known, which complicates our ability to model soil organic matter dynamics in forested ecosystems. The main objective of this research was to understand the degree to which the observed differences in soil C and N dynamics between AM and EcM dominated forests are driven by tree traits like litter decomposability and root exudation versus mycorrhizal fungal nutrient acquisition strategies. We investigated these mechanisms using observations and targeted experiments and incorporated this knowledge into a process-based soil organic matter model. The observational studies compared the importance of leaf litter decomposability versus fungal identity on soil organic matter processes. We found that often fungal identity and traits were more important drivers of soil organic matter patterns than leaf litter decomposability. We ran two novel experiments: 1) a growth chamber experiment across four EcM and four AM tree species using a 13 C-labeled atmosphere to trace seedling-derived C into hyphae, the rhizosphere, and soil; and 2) an in situ decomposition experiment of six different 13 C and 15 N labeled litters that ranged in decomposability incubated across a gradient of EcM dominance at three sites that capture important variation in climate, soils, and forest species composition. In the first experiment, we found no significant differences of seedling mycorrhizal association on soil carbon sequestration over a growing season, but we did find that mycorrhizal association affected rhizodeposition with EcM-associating seedlings depositing more carbon in response to increased nitrogen availability. The decomposition experiment is still ongoing, but thus far, we have found slower litter decomposition in only one of three EcM-dominated forests which suggests that differences between AM- and EcM-dominated forests depend on the environmental context and identity of the EcM fungi. Lastly, we explicitly incorporated mycorrhizal processes into the Carbon, Organisms, Rhizosphere, and Protection in the Soil Environment (CORPSE) model creating Myco-CORPSE. By including the different nutrient acquisition strategies of AM and EcM fungi, we explored the conditions under which EcM fungi can slow decomposition rates and lead to greater soil organic carbon accumulation compared to AM fungi. We found that the effect of EcM fungi was highly context dependent and that EcM fungi decreased decomposition in colder forests with recalcitrant litter inputs and when they produced oxidases and necromass-degrading enzymes. Our research highlights the importance of fungal nutrient acquisition in driving soil organic matter patterns and the need to move beyond the AM-EcM dichotomy to consider the identity and traits of the specific fungi participating in the symbiosis. Overall, this research has resulted in six, peer-reviewed published papers in journals such as Global Change Biology, Ecology (2), Soil Biology and Biochemistry, and Ecosystems (2). There are at least two more papers in progress on this research including one that was recently submitted to Global Change Biology.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2024

Electrochemical Production of Highly Valuable Carbon Nanotubes from Flue-Gas Sourced CO 2

The overarching goal of the project was to demonstrate a technology at pilot-scale that enables a net reduction in CO 2 and the production of carbon nanotubes (CNTs) with material properties comparable to commercially available CNTs at a selling price of ~80-90% less than what is available in the current market. The objectives were: (1) demonstrate the ability to utilize synthetic and real flue gas provided by a utility to produce CNTs through the SkyNano’s novel electrochemical process; (2) produce CNTs at the pilot-scale (0.2 kg/hr) using industrial flue gas that exhibit properties consistent with those available on the market today in industrial quantities, including median diameters of <30 nm, purity of at least 95% CNTs in final product, and high crystallinity (I D /I G < 1, measured via Raman spectroscopy); and (3) demonstrate the process to be sustainable and economically viable through the completion of a techno-economic analysis (TEA) and a life-cycle analysis (LCA).

20 FOSSIL-FUELED POWER PLANTS↗

DOE OSTI2025

A Review and Comparison of Different Sensitivity Analysis Techniques in Practice

There exist many methods for sensitivity analysis readily available to the practitioner. While each seeks to help the modeler answer the same general question – How do sources of uncertainty or changes in the model inputs relate to uncertainty in the output? – different methods are associated with different assumptions, constraints, and required resources, leading to conclusions that may vary in interpretability and level of detail. Thus, it is crucial that the practitioner selects the desired sensitivity analysis method judiciously, making sure to match the selected approach to the specifics of their problem and to their desired objectives. In this chapter, we provide a practical overview of a collection of widely used, widely available sensitivity analysis methods. We focus on global sensitivity approaches, which seek to characterize how uncertainty in the model output may be allocated to sources of uncertainty in model inputs across the entire input space. Generally, this will require the practitioner to specify a probability distribution over the input space. On the other hand, methods for local sensitivity analysis do not require this specification but they have more limited utility, providing insight into sources of uncertainty associated only with a particular, specified location in the input space. Our hope is that this chapter may serve as a decision-making tool for practitioners, helping to guide the selection of a sensitivity analysis approach that will best fit their needs. To support this goal, we have selected a suite of approaches to cover, which, while not exhaustive, we believe provides a flexible and robust sensitivity analysis toolkit. All methods included are widely used and available in standard software packages.

97 MATHEMATICS AND COMPUTING↗

DOE OSTI2024

Improved digital construction binder solution utilizing calcium aluminate additive for Infrastructure Scale Additive Manufacturing

Oak Ridge National Laboratory (ORNL) worked with Kerneos Inc., a Division of Imerys USA, Inc. to develop an improved digital construction binder using calcium aluminate additives produced by Kerneos along with locally available concrete materials. When the two-stage (2K) binder formulation was added to commercially available Portland Limestone Cement and sand to form a digital construction mortar, its strength exceeded a number of commercially available digital construction binders both at early and later ages. At the same time, the developed formulation showed precise control of setting time after addition and showed very low shrinkage making it a strong, reliable, and easily customizable alternative to fixed proprietary digital construction binders.

36 MATERIALS SCIENCE↗

DOE OSTI2025

Improved digital construction binder solution utilizing calcium aluminate additive for Infrastructure Scale Additive Manufacturing

36 MATERIALS SCIENCE↗

DOE OSTI2025

VA Determinants of Health Data Curation Documentation FY25-Q2

The U.S. Department of Veterans Affairs (VA) places the health and well-being of our nation’s veterans as its top priority. VA is dedicated to offering timely access to high-quality, evidence-based mental health care that meets the needs of veterans and supports their reintegration into society. One of our core missions is to prevent suicide among veterans through innovative approaches and resources. With funding from the VA Office of Mental Health and Suicide Prevention (OMHSP), the Determinants of Health (EDH) project has developed innovative datasets associated with specific health outcomes, a methodology for transforming spatiotemporal data from one spatial reference (e.g., a 1km grid) to another (e.g., US Census Tracts), and capabilities for modeling health outcomes. These datasets represent an enhancement of the Agency for Healthcare Research and Quality (AHRQ), addressing key gaps by introducing finer spatial resolution (Census Tract) and additional geographical covariates into existing data. The curation and standardization of these datasets is a complex task since they often originate from various sources and are measured at different spatial and temporal resolutions. For example, US Census data products typically use census blocks, block groups, or counties, while data like weather data are available on 1km grids. Some economic data may only be available at the zip code level. In this context, ‘standardized’ means that all datasets share the same spatial extent (e.g., US Census Tract and/or County), and ‘curated’ implies a repeatable process with data provenance and the use of appropriate methodologies for covariate conversion. The Determinants of Health datasets draw from multiple sources, resulting in variables with varying degrees of availability, patterns of missing data, and methodological considerations across different sources, geographies, and years.

97 MATHEMATICS AND COMPUTING↗

DOE OSTI2025

Hourly Load Profile Dataset for Federal, State, and Municipal Electric Vehicle Fleets in the United States

The electrification of U.S. federal, state, and municipal fleets is accelerating rapidly, driven by an increased availability of competitive electric vehicle (EV) options and supportive policies and targets. The dataset described in this report, accessible at data.nrel.gov/submissions/280, provides a critical foundation for identifying fleet electricity demand, projecting these future demands, and developing actionable strategies to support the widespread electrification of government fleets. The dataset incorporates available fleet data, including 54% of federal agency vehicles approved for analysis (notably, the U.S. Postal Service is absent). Additionally, it includes data from 50,000 state government vehicles and 94,000 local government vehicles. While this represents a small fraction of the 4.4 million vehicles owned by state and local governments reported by the Federal Highway Administration (2022), the framework supports future expansion as more fleet inventory data become available.

33 ADVANCED PROPULSION SYSTEMS↗

DOE OSTI2025

Route Energy Prediction (RouteE) Powertrain Validation Report

The National Renewable Energy Laboratory's flagship package in the RouteE suite, RouteE-Powertrain, is a mesoscopic energy model that predicts vehicle energy consumption given discrete attributes that describe each segment or link in a vehicle's path on a road network. High-frequency, physics-based, powertrain simulators, such as NREL's FASTSim, are well-suited to model vehicle energy consumption when real driving data and a detailed understanding of the vehicle powertrain specifications are available. However, there are a variety of situations in the past, present (real-time), and future where high-frequency driving data and/or vehicle information may not be available, but reliable energy consumption is still desired, such as energy-aware vehicle routing. These are the ideal applications for RouteE-Powertrain. The suite of RouteE tools also includes RouteE-Compass, which is an eco-routing software that incorporates energy consumption into network routing algorithms, and RouteE-Mobile, which is a prototype smartphone navigation app to demonstrate the integrated capabilities of the RouteE suite for real-world eco-routing. The focus of this validation report is to share key metrics about the data sets and models behind RouteE-Powertrain. The set of RouteE-Powertrain models discussed in this report are made available through the RouteE web API through the NREL Developer Network.

33 ADVANCED PROPULSION SYSTEMS↗

DOE OSTI2025

VA Determinants of Health Data Curation Documentation FY25-Q3

97 MATHEMATICS AND COMPUTING↗

DOE OSTI2025

Testing, Calibration, and UxS Integration of the Kromek GR1 Plus CZT Gamma Spectrometer

Collecting radiation measurements can be a hazardous task, especially in the presence of highly active sources. Various scenarios necessitate source search, classification, and quantification, often with limited or no a priori information. Activities such as disaster mitigation, emergency response, environmental monitoring, and site remediation may involve dangerous radioactive sources. In these situations, there is a pressing need for remote monitoring capabilities that protect human operators from potential harm and enhance adherence to the principle of “As Low as Reasonably Achievable” (ALARA) for radiation doses. The first step toward achieving remote radiation measurement capabilities is the remote operation of a radiation sensor. Once this milestone is reached, the next challenge is to integrate this remote sensing capability into suitable actuation agents, collectively referred to as uncrewed systems (UxS). These systems include familiar platforms such as robotic quadrupeds, aerial multirotor vehicles, and ground vehicles, any of which may be teleoperated, act autonomously, or utilize a combination of both. A critical factor in achieving remote radiation sensing is the availability of data from the appropriate sensor. Many commercially available radiation sensors have closed-source documentation for their communication protocols. Typical end-user products are often self-contained, handheld devices designed for manual measurement scenarios. While there are commercial off-the-shelf (COTS) integrations of radiation sensors with UxS available for purchase, these solutions are typically tailored for specific use cases and may not meet the requirements of different applications. This paper discusses efforts to remotely acquire radiation measurements from a small form-factor CZT gamma spectrometer. Sandia National Laboratories has successfully demonstrated the initial capability to integrate low size, weight, and power (SWaP) gamma spectroscopy into various UxS, alongside co-located GPS data logging and sensor calibration and qualification. With remote gamma spectroscopy achieved, the stage is set for UxS integration of this capability.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

DOE OSTI2025

VA Community Determinants of Health Data Curation Documentation FY25-Q4

The U.S. Department of Veterans Affairs (VA) places the health and well-being of our nation’s veterans as its top priority. VA is dedicated to offering timely access to high-quality, evidence-based mental health care that meets the needs of veterans and supports their reintegration into society. One of our core missions is to prevent suicide among veterans through innovative approaches and resources. With funding from the VA Office of Mental Health and Suicide Prevention (OMHSP), the Determinants of Health (EDH) project has developed innovative datasets associated with specific health outcomes, a methodology for transforming spatiotemporal data from one spatial reference (e.g., a 1km grid) to another (e.g., US Census Tracts), and capabilities for modeling health outcomes. These datasets represent an enhancement of the Agency for Healthcare Research and Quality (AHRQ), addressing key gaps by introducing finer spatial resolution (Census Tract) and additional geographical covariates into existing data. The curation and standardization of these datasets is a complex task since they often originate from various sources and are measured at different spatial and temporal resolutions. For example, US Census data products typically use census blocks, block groups, or counties, while data like weather data are available on 1km grids. Some economic data may only be available at the zip code level. In this context, standardized’ means that all datasets share the same spatial extent (e.g., US Census Tract and/or County), and ‘curated’ implies a repeatable process with data provenance and the use of appropriate methodologies for covariate conversion. The Determinants of Health datasets draw from multiple sources, resulting in variables with varying degrees of availability, patterns of missing data, and methodological considerations across different sources, geographies, and years.

97 MATHEMATICS AND COMPUTING↗

DOE OSTI2025

VA Community Determinants of Health Data Curation Documentation FY26-Q1

The U.S. Department of Veterans Affairs (VA) places the health and well-being of our nation’s veterans as its top priority. VA is dedicated to offering timely access to high-quality, evidence-based mental health care that meets the needs of veterans and supports their reintegration into society. One of our core missions is to prevent suicide among veterans through innovative approaches and resources. With funding from the VA Office of Mental Health and Suicide Prevention (OMHSP), the Community Determinants of Health (EDH) Data project has developed innovative datasets associated with specific health outcomes, a methodology for transforming spatiotemporal data from one spatial reference (e.g., a 1km grid) to another (e.g., US Census Tracts), and capabilities for modeling health outcomes. These datasets represent an enhancement of the Agency for Healthcare Research and Quality (AHRQ), addressing key gaps by introducing finer spatial resolution (Census Tract) and additional geographical covariates into existing data. The curation and standardization of these datasets is a complex task since they often originate from various sources and are measured at different spatial and temporal resolutions. For example, US Census data products typically use census blocks, block groups, or counties, while data like weather data are available on 1km grids. Some economic data may only be available at the zip code level. In this context, ‘standardized’ means that all datasets share the same spatial extent (e.g., US Census Tract and/or County), and ‘curated’ implies a repeatable process with data provenance and the use of appropriate methodologies for covariate conversion. The Community Determinants of Health datasets draw from multiple sources, resulting in variables with varying degrees of availability, patterns of missing data, and methodological considerations across different sources, geographies, and years.

99 GENERAL AND MISCELLANEOUS↗