Results for “behavior” — Page 13

DOE OSTI2024

Deployment of BISON models of fuel restructuring at high burnup and related fission gas behavior in UO 2

This milestone report details the advancements made in fiscal year 2024 under the Nuclear Energy Advanced Modeling and Simulation (NEAMS) program to improve the modeling of fission gas behavior in high burnup UO 2 nuclear fuel in the BISON fuel performance code. As nuclear fuel is pushed to higher burnups, significant microstructural changes occur within the fuel, including the formation of a high burnup structure (HBS) on the pellet rim and a dark zone deeper within the pellet. These regions, characterized by subgrain formation and increased pore densities, have critical implications for fission gas behavior and release, which are not well understood. The modeling capabilities in BISON did not adequately predict these phenomena, leading to an underestimation of fuel restructuring and - potentially - of fission gas release. To address these gaps, this milestone focused on three key objectives: (1) reviewing and assessing Sifgrs's capabilities for low burnup fuel, on which high burnup capabilities rely, (2) validating and expanding HBS fission gas modeling capabilities, including investigating mechanisms for fission gas release from HBS, and (3) expanding Sifgrs to enable modeling of dark zone formation and its effects on fission gas behavior. These objectives were achieved and are described herein. The achievements of this NEAMS milestone are significant for the industry's goal of burnup extension. The improved predictive modeling capabilities for both low- and high-burnup conditions enhance our understanding of fuel performance under both normal operations and transient scenarios. Although goals were reached, future work is necessary to validate these models against experimental data and quantify their accuracy in different conditions. In parallel, mechanistic modeling efforts should continue to extend and refine these capabilities to increase accuracy while reducing reliance on empirical models. This will ensure robust performance across a broader range of conditions.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

NASA NTRS2002

Apolipoprotein E expression and behavioral toxicity of high charge, high energy (HZE) particle radiation

Apolipoprotein E (apoE) is a lipid binding protein that plays an important role in tissue repair following brain injury. In the present studies, we have investigated whether apoE affects the behavioral toxicity of high charge, high energy (HZE) particle radiation. METHODS: Sixteen male apoE knockout (KO) mice and sixteen genetically matched wild-type (WT) C57BL mice were used in this experiment. Half of the KO and half of the WT animals were irradiated with 600 MeV/amu iron particles (2 Gy whole body). The effect of irradiation on motor coordination and stamina (Rotarod test), exploratory behavior (open field test), and spatial working and reference memory (Morris water maze) was assessed. ROTAROD TEST: Performance was adversely affected by radiation exposure in both KO and WT groups at 30 d after irradiation. By 60 d after radiation, the radiation effect was lost in WT, but still apparent in irradiated KO mice. OPEN FIELD TEST: Radiation reduced open field exploratory activity 14, 28, 56, 84, and 168 d after irradiation of KO mice, but had no effect on WT mice. MORRIS WATER MAZE: Radiation adversely affected spatial working memory in the KO mice, but had no discernible effect in the WT mice as assessed 180 d after irradiation. In contrast, irradiated WT mice showed marked impairment of spatial reference memory in comparison to non-irradiated mice, while no effect of radiation was observed in KO mice. CONCLUSIONS: These studies show that apoE expression influences the behavioral toxicity of HZE particle radiation and suggest that apoE plays a role in the repair/recovery from radiation injury of the CNS. ApoE deficiency may exacerbate the previously reported effects of HZE particle radiation in accelerating the brain aging process.

Non-NASA Center↗

NASA NTRS2005

Behavioral health in Antarctica: implications for long-duration space missions

Ideally, evidence from long-duration spaceflight should be used to predict likely occurrences of behavioral health events and for planning management strategies for such events. With small numbers of space travelers, and limited long-duration missions of a year or more, Earth analogues and simulations must be used as the evidence base, despite such analogues lacking microgravity, radiation, rapidly altering photoperiodicity, and fidelity to space. Antarctic health data are reviewed and an assessment made of the likely frequency of behavioral health events. Based on the Antarctic evidence, the likelihood of behavioral health problems in space is low. However, such cases may be serious and of high consequence, placing considerable demands on the mission crew and ground support to achieve a successful outcome, given the availability of pharmaceuticals and resources.

Review↗

NASA NTRS2016

Yield and Failure Behavior Investigated for Cross-Linked Phenolic Resins Using Molecular Dynamics

Molecular dynamics simulations were conducted to fundamentally evaluate the yield and failure behavior of cross-linked phenolic resins at temperatures below the glass transition. Yield stress was investigated at various temperatures, strain rates, and degrees of cross-linking. The onset of non-linear behavior in the cross-linked phenolic structures was caused by localized irreversible molecular rearrangements through the rotation of methylene linkers followed by the formation or annihilation of neighboring hydrogen bonds. The yield stress results, with respect to temperature and strain rate, could be fit by existing models used to describe yield behavior of amorphous glasses. The degree of cross-linking only indirectly influences the maximum yield stress through its influence on glass transition temperature (Tg), however there is a strong relationship between the degree of cross-linking and the failure mechanism. Low cross-linked samples were able to separate through void formation, whereas the highly cross-linked structures exhibited bond scission.

Molecular dynamics↗

NASA NTRSDate not supplied

Behavioral Health Benefits of the ISS Pick-and-Eat Crop Growth System

Summary: We summarize findings related to assessing the pick-and-eat salad-crop productivity and acceptability of the ISS food system as a countermeasure to maintain behavioral health in long-duration spaceflight. BACKGROUND Plants are a potential countermeasure for the stresses of living in space. Caring for plants and eating fresh food have been shown to serve as a psychological benefit for previous astronauts and for others in analogous environments such as Antarctica [1,2]. Gardening can be therapeutic in terrestrial settings [3]. These effects may carry over or be more pronounced in austere environments such as spaceflight. It can reduce stress and increase sensory stimulation and enjoyment [2]. Growing crops may offer astronauts meaningful and engaging work as they care for living things in an austere environment away from Earth’s nature and as they provide sustenance for their crew. We examined the extent to which interacting with plants (e.g., tending to, consuming) was related to behavioral health outcomes in long-duration space missions. METHOD Participants were 27 astronauts that interacted with the plant system VEG-04, VEG-05, and HRF-VEG (VEG-03 I-L, PH-04). In total, there were 106 in-flight observations. Participants completed monthly measures of mood and well-being, enjoyment and time spent performing specific crop growth and consuming the plants, meaningfulness, performance, connections with others and the Earth, desire to work with and eat plants, and experiences with struggling or dying plants. Higher ends of the 7-point Likert scale indicated more positive outcomes, lower ends of the scale were anchored with more negative outcomes, and the scale midpoints indicated neutral positions. Participants selected a specific survey version based on whether they interacted with the plant system(s) or not, and we included only the scores from the crewmembers that participated in any given activity. RESULTS & DISCUSSION Results indicated that participants generally rated tasks related to the plants and crop growth as enjoyable. Consuming the harvested plants and voluntary viewing were the most enjoyable activities. Tending to the plants was reported as moderately enjoyable, indicating BHP benefits from this work task. The BHP impacts of whether the task was engaging, meaningful, supported well-being, or was demanding for a crewmember were generally positive and increased over time. As shown in the Figure, working with plants was reported as more engaging, meaningful, and beneficial to well-being over time, while the demand from the task was moderate to low and consistent over time. Engaging, meaningful, and supporting well-being were strongly, positively correlated with each other, which is consistent with research that suggests engaging and meaningful work can support well-being. Plant activities such as voluntary viewing, watering, harvesting, and consuming, were positively related to task engagement and meaning, and enjoyment and well-being. Findings suggest that working with plants and consuming them can be a behavioral health countermeasure for long-duration spaceflight. REFERENCES [1] Schlacht I, et al. (2020) Impact of plants in isolation: The EDEN-ISS…in Antarctica. In Advances in Human Factors of Transportation, Washington DC. [2] Vessel E, Russo S (2015) Effects of reduced sensory stimulation and…countermeasures…. NASA/TM-2015-218576. [3] Odeh R, Guy C (2017) Gardening for therapeutic people-plant interactions during LDSM. Open Agriculture, 2(1), 1-13. ACKNOWLEDGEMENTS This research was supported by the Human Health and Performance Contract NNJ15HK11B, and NASA grant MTL #1075 (PI G.D. Massa).

behavioral health↗

NASA NTRSDate not supplied

Scenario-Based Task Design for Airline Pilot Anticipatory Behaviors: Asynchronous Assessment of Complex Cognitive Skills

Airline pilots must anticipate potential threats to passenger safety and efficient flight. Such anticipation needs to occur at both the system and individual levels, yet no formal training for these anticipatory behaviors currently exists. The emerging field of resilience engineering provides a framework to explore this problem. Given the complex nature of this problem, the assessment portion of the project constituted a challenge. Simulator time is expensive as simulators are costly to run, and they are extremely limited in number. Also, by the nature of their work, pilots as a group are hard to connect with in person; thus, asynchronous methods were adopted. Further, to ensure that authentic pilot behaviors were observed, task-based scenarios were used rather than focus group or interview protocols. This session explores the design of asynchronous learning and a measure for assessing pilot anticipatory behaviors outside of a simulator to help design learning opportunities for pilots. The scenario-based and active assessment items will be discussed in detail, and demonstrations of these items will be shared. These items constitute the bulk of the challenge for this work. At the time of this writing, data is being collected to assess the effectiveness of the interactive training module and validate the measures. This data will be analyzed and presented as part of the session. This will include any linkages between the scenario-based and traditional assessment items.

task design↗

NASA NTRSDate not supplied

Behavioral Health Benefits of the ISS Pick-and-Eat Crop Growth System

Summary: We summarize findings related to assessing the pick-and-eat salad-crop productivity and acceptability of the ISS food system as a countermeasure to maintain behavioral health in long-duration spaceflight. BACKGROUND Plants are a potential countermeasure for the stresses of living in space. Caring for plants and eating fresh food have been shown to serve as a psychological benefit for previous astronauts and for others in analogous environments such as Antarctica [1,2]. Gardening can be therapeutic in terrestrial settings [3]. These effects may carry over or be more pronounced in austere environments such as spaceflight. It can reduce stress and increase sensory stimulation and enjoyment [2]. Growing crops may offer astronauts meaningful and engaging work as they care for living things in an austere environment away from Earth’s nature and as they provide sustenance for their crew. We examined the extent to which interacting with plants (e.g., tending to, consuming) was related to behavioral health outcomes in long-duration space missions. METHOD Participants were 27 astronauts that interacted with the plant system VEG-04, VEG-05, and HRF-VEG (VEG-03 I-L, PH-04). In total, there were 106 in-flight observations. Participants completed monthly measures of mood and well-being, enjoyment and time spent performing specific crop growth and consuming the plants, meaningfulness, performance, connections with others and the Earth, desire to work with and eat plants, and experiences with struggling or dying plants. Higher ends of the 7-point Likert scale indicated more positive outcomes, lower ends of the scale were anchored with more negative outcomes, and the scale midpoints indicated neutral positions. Participants selected a specific survey version based on whether they interacted with the plant system(s) or not, and we included only the scores from the crewmembers that participated in any given activity. RESULTS & DISCUSSION Results indicated that participants generally rated tasks related to the plants and crop growth as enjoyable. Consuming the harvested plants and voluntary viewing were the most enjoyable activities. Tending to the plants was reported as moderately enjoyable, indicating BHP benefits from this work task. The BHP impacts of whether the task was engaging, meaningful, supported well-being, or was demanding for a crewmember were generally positive and increased over time. As shown in the Figure, working with plants was reported as more engaging, meaningful, and beneficial to well-being over time, while the demand from the task was moderate to low and consistent over time. Engaging, meaningful, and supporting well-being were strongly, positively correlated with each other, which is consistent with research that suggests engaging and meaningful work can support well-being. Plant activities such as voluntary viewing, watering, harvesting, and consuming, were positively related to task engagement and meaning, and enjoyment and well-being. Findings suggest that working with plants and consuming them can be a behavioral health countermeasure for long-duration spaceflight. REFERENCES [1] Schlacht I, et al. (2020) Impact of plants in isolation: The EDEN-ISS…in Antarctica. In Advances in Human Factors of Transportation, Washington DC. [2] Vessel E, Russo S (2015) Effects of reduced sensory stimulation and…countermeasures…. NASA/TM-2015-218576. [3] Odeh R, Guy C (2017) Gardening for therapeutic people-plant interactions during LDSM. Open Agriculture, 2(1), 1-13. ACKNOWLEDGEMENTS This research was supported by the Human Health and Performance Contract NNJ15HK11B, and NASA grant MTL #1075 (PI G.D. Massa).

countermeasure↗

DOE OSTI2025

Deformation Behaviors in Single BCC‐Phase Refractory Multi‐Principal Element Alloys under Dynamic Conditions

The mechanical behavior and microstructural evolution of a BCC-phase NbTaTiV refractory multi-principal element alloy (RMPEA) is studied over a wide range of strain rates (10 −3 to 10 3 s −1 ) and temperatures (room temperature to 850 °C). The mechanical property of present RMPEA shows less strain-rate dependence and strong resistance to softening at high temperatures. Under high strain-rate loading, the formation of thin type-I twins is observed, which could lead to an increase in strain-hardening rates. However, this hardening mechanism competes with adiabatic heating effects, resulting in the deterrence of strain-hardening behaviors. In contrast, substantial strain-hardening occurs at cryogenic temperatures due to the formation of twins, which act as stronger barriers to dislocation motion and interact with each other. To further understand the different strain-hardening behaviors, density functional theory (DFT) calculations predict relatively low stacking fault energies and high twinning stress for the NbTaTiV RMPEA.

36 MATERIALS SCIENCE↗

DOE OSTI2024

Pressure‐Dependent “Insulator–Metal–Insulator” Behavior in Sr‐Doped La 3 Ni 2 O 7

Abstract Recently, superconductivity at high temperatures is observed in bulk La 3 Ni 2 O 7−δ under high pressure. However, the attainment of high‐purity La 3 Ni 2 O 7−δ single crystals remains a formidable challenge. Here, the crystal structure and physical properties of single crystals of Sr‐doped La 3 Ni 2 O 7 synthesized at high pressure (20 GPa) and high temperature (1400 °C) are reported. Through single crystal X‐ray diffraction, it is shown that high‐pressure‐synthesized paramagnetic Sr‐doped La 3 Ni 2 O 7 crystallizes in an orthorhombic structure with Ni─O─Ni bond angles of 173.4(2)° out‐of‐plane and 175.0(2)°and 176.7(2)°in plane. The substitution of Sr alters in band filling and the ratio of Ni 2+ /Ni 3+ in Sr‐doped La 3 Ni 2 O 7 , aligning them with those of “La 3 Ni 2 O 7.05” , thereby leading to significant modifications in properties under high pressure relative to the unsubstituted parent phase. At ambient pressure, Sr‐doped La 3 Ni 2 O 7 exhibits insulating properties, and the conductivity increases as pressure goes up to 10 GPa. However, upon further increasing pressure beyond 10.7 GPa, Sr‐doped La 3 Ni 2 O 7 transits back from a metal‐like behavior to an insulator. The insulator–metal–insulator trend under high pressure dramatically differs from the behavior of the parent compound La 3 Ni 2 O 7−δ , despite their similar behavior in the low‐pressure regime. These experimental results underscore the considerable challenge in achieving superconductivity in nickelates.

36 MATERIALS SCIENCE↗

DOE OSTI2026

Photoresponsive Rotaxanes Switch Lipid Bilayer Neuromorphic Behavior with Light

A rotaxane consisting of a macrocycle ring with two azobenzene units mechanically interlocked onto a bolaamphiphilic axle was incorporated into droplet interface bilayers (DIBs). The azobenzene groups on the ring underwent quasi-reversible, photoisomerization-induced cycling between 1-E and 1-Z configurations when irradiated with 370 and 467 nm light, respectively, enabling programmable access to different history-dependent electrical behaviors from the same membrane. In the 1-E configuration, bilayers exhibited type-IIactive memristance that coincided with increasingly elevated ionic conduction, associated with progressively enhanced bilayer permeability during voltage cycling. In the 1-Z configuration, bilayers displayed type-I, passive memcapacitive behavior, reflecting tighter lipid packing and reduced ionic permeability. Photoswitching also yielded a nonvolatile, photoresponsive memcapacitor that could be modulated repetitively with negligible loss, likely via reversible changes in membrane thickness. Concurrent ohmic leakage currents across the membrane were less than 0.3%. These results agree with previous studies with increasing membrane permeability using photoswitchable rotaxanes and provide new insights into the coupling between volatile and nonvolatile memcapacitance during photoisomerization. More broadly, they demonstrate a new strategy for the manipulation of neuromorphic behaviors in soft materials using light, with implications for brain-inspired computation and sensing.

droplet interface bilayers↗

DOE OSTI2024

Piezochromic Behavior of 2,4,6-Triphenylpyrylium Tetrachloroferrate

In advanced photonics, there is a growing interest in piezochromic luminescent materials that exhibit multicolor switching, driven by their potential applications in optical recording, memory, and sensors. Here, the piezochromic behavior of 2,4,6-triphenylpyrylium tetrachloroferrate (Py-FeCl 4 ) under high pressures from 0 to 9 GPa is reported. The observed multicolor changing properties of Py-FeCl 4 (yellow–orange–red–maroon–black) are found to be fully reversible upon decompression to ambient conditions. The mechanism of Py-FeCl 4 piezochromism is investigated via Raman, infrared, and UV–vis spectroscopy combined with powder X-ray Diffraction. The absence of structural phase transitions as well as the abrupt shifts of bandgap values together with characteristic Raman and IR peaks within 0-9 GPa suggests that the Py-FeCl 4 multicoloring switching behavior is driven by an electron transfer between the inorganic FeCl 4 – anion and the organic pyrylium cation. The obtained results demonstrate that Py-FeCl 4 dye is a good candidate for developing high-pressure sensing technologies designed to function in extreme environments. Moreover, due to the inherent role of molecular-structure relationships in the pyrylium salt's photophysical properties, findings suggest the potential discovery of piezochromic behavior in other pyrylium compounds.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2024

A Eulerian three-fluid flow framework for the study of fuel dispersal behavior under loss-of-coolant accident conditions

As the nuclear industry explores new fuel designs to accommodate increased burnup, studying fuel behavior during loss-of-coolant accidents is essential for ensuring the safe operation of light-water reactors. Here, this study presents a computational model to simulate the intricate three-phase flow dynamics of fuel dispersal following cladding breach, where solid fuel particles and carrier fission gases interact with the surrounding liquid or gas medium. The model utilizes a Eulerian three-fluid framework to depict the phase interaction within interpenetrating continua, treating fragmented fuel as granular material. Closure relationships for bulk-flow properties of the solid phase and detailed interfacial exchange terms in high-temperature, high-speed gas-solid-liquid flow scenarios are proposed. The model was validated using adiabatic experimental results in the literature, focusing on characterizing fuel dispersal behavior during loss-of-coolant accidents conditions. Settlement characteristics of the solids, quantified by the probability distribution of equivalent particles, closely matched probability density functions reported in experimental studies. Key highlights of this study include the theoretical description of a coupled three-phase flow with phase change, interpretation of the high-pressure boundary conditions and insights into the transient behavior of gas-solid-liquid phase dynamics during a simulated high-speed dispersal event.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

DOE OSTI2026

Linking microstructure to creep behavior in vertically and horizontally built LPBF Haynes 282 compared with wrought material via θ -projection

Laser Powder Bed Fusion (LPBF) has emerged as a promising route for fabricating intricate geometries in high-performance alloys. Haynes 282 (H282) is a strong candidate for applications such as heat exchangers or engines due to its excellent creep strength and thermal stability; however, the long-term creep behavior of LPBF-processed H282 remains poorly understood. In this study, the θ -projection method is used to analyze and extrapolate the creep behavior of vertically built LPBF, horizontally built LPBF, compared to wrought H282 tested at 816 °C. Vertically built LPBF H282 exhibits the lowest minimum creep rate (MCR), while the horizontally built condition shows a higher MCR comparable to that of wrought H282. Despite these differences, both LPBF conditions exhibit significantly shorter rupture life and reduced rupture strain than the wrought material, with the most severe degradation observed in the horizontal builds, consistent with an earlier onset of tertiary creep and accelerated strain-rate evolution. Microstructural characterization reveals that both LPBF and wrought H282 exhibit abundant twin-related boundary character; however, their grain boundary topologies differ markedly. The wrought alloy contains a higher fraction of low-angle grain boundaries and continuous twin lamellae, whereas the LPBF microstructure is characterized by a suppressed low-angle boundary population and fragmented twin-related boundaries embedded within irregular high-angle grain boundary networks. Fractographic analysis further reveals predominantly intergranular cracking in LPBF H282, accompanied by grain-boundary-decorated carbides, Al 2 O 3 inclusions, and high-aspect-ratio pores. These results demonstrate that grain boundary topology, rather than minimum creep rate alone, plays a critical role in governing creep damage accumulation and rupture behavior in LPBF and wrought H282.

Creep↗

DOE OSTI2025

Understanding the impact of SPMAK and PEGPEA in crosslinked PEGDA membranes: Methanol-carboxylate co-transport behavior and correlating structure-physicochemical-transport properties

Investigating multicomponent transport in dense, hydrated polymer membranes is necessary in applications such as fuel cells, electrolyzers, and desalination systems. Of particular interest are photoelectrochemical CO 2 reduction cells (PEC-CRC) which produce liquid products such as alcohols (methanol) and carboxylates (formate, acetate). Flux coupling and competitive sorption behavior of these products (solutes) have been found to affect permselectivity, thereby motivating us to investigate fundamental membrane structure-physicochemical-transport relationships. Past research has shown that systematic tuning of crosslinked cation exchange membranes (CEMs) with charge-neutral monoacrylate monomers containing alkyl and phenyl groups (i.e., poly(ethylene glycol) methacrylate (PEGMA), and poly(ethylene glycol) phenyl ether acrylate (PEGPEA)) can suppress acetate transport (permeability) in co-permeation with methanol. To further investigate this transport behavior and to enhance membrane ionic conductivities, 3-sulfopropyl methacrylate potassium (SPMAK), a sulfonated monoacrylate monomer is incorporated here. SPMAK content is varied with neutral PEGPEA and diacrylate crosslinker, poly (ethylene glycol) diacrylate (PEGDA) of two different chain lengths (n = 10 and 13) to prepare membranes of various compositions. Electrochemical and physicochemical properties including ionic conductivity, ion exchange capacity, and water uptake increase with increasing charged SPMAK content. Different states of water within hydrated membranes are probed using differential scanning calorimetry (DSC), where increasing intermediate (loosely bound) water is observed with increasing hydrophilic SPMAK content. The transport behavior of methanol and carboxylates (formate, acetate, propionate) are investigated, where permeabilities vary as methanol > formate > acetate ≈ propionate. Interestingly, permeabilities decrease with increasing PEGPEA content and are more dependent on solute diffusion than sorption. Permeabilities and diffusivities decrease while permselectivities increase with decreasing PEGDA chain length.

25 ENERGY STORAGE↗

DOE OSTI2025

Characterizing and modeling the mechanical behavior of an anion exchange membrane for carbon capture applications

A new direct air capture (DAC) technology uses a moisture swing (MS) process with anion exchange membranes, potentially offering a more energy-efficient way to remove CO₂ from the air. In this MS process, the membrane absorbs CO₂ as it dries and releases it when water is added. Understanding the mechanical behavior of these membranes is essential for improving the design and efficiency of DAC systems and prolonging sorbent lifetime. This study tested one anion exchange membrane, Fumasep’s FAA-3, under mechanical loading and various temperature and humidity conditions to measure its swelling, stiffness, strength, plastic deformation, and stress relaxation. Experimental results were used to identify a mechanical model for FAA-3 that can be used to predict the material’s nonlinear viscous behavior under various loads and environments. Unlike prior studies that assumed linear elastic behavior, this work incorporates humidity-dependent swelling, thermal expansion, and nonlinear viscoelasticity of FAA-3 in both the experiments and the model.

Direct air capture↗

DOE OSTI2025

Inverse Thermodynamics: Designing Interactions for Targeted Phase Behavior

The traditional goal of inverse self-assembly is to design interactions that drive particles toward a desired target structure. However, achieving successful self-assembly also requires tuning the thermodynamic conditions under which the structure is stable. In this work, we extend the inverse design paradigm to explicitly address this challenge by developing a framework for inverse thermodynamics, i.e., the design of interaction potentials that realize specific thermodynamic behavior. As a step in this direction, using patchy particle mixtures as a model system, we demonstrate how precise control over both bonding topology and bond energetics enables the programming of targeted phase behavior. In particular, we establish design principles for azeotropic demixing and show how to create mixtures that exhibit azeotropy at any prescribed composition. Our predictions are validated through Gibbs-ensemble simulations [Panagiotopoulos, Mol. Phys. 1987, 61, 813−826]. These results highlight the necessity of coupling structural design with thermodynamic engineering, and provide a blueprint for controlling complex phase behavior in multicomponent systems.

Azeotropes↗

DOE OSTI2026

Elucidating the Microscale Behavior and Phase Separation Kinetics of Thermally Responsive Ionic Liquid–Water Mixtures

Thermally responsive ionic liquids (ILs) exhibit liquid-liquid phase separation into a water-rich (WR) and ionic-liquid-rich (ILR) phase when heated above a lower critical solution temperature (LCST). This phase behavior has been leveraged for applications ranging from forward osmosis (FO) desalination, where the IL acts as a draw solute, to refrigeration and dehumidification cycles, where the IL acts as a liquid desiccant. While significant effort has been devoted to characterizing the thermodynamic and thermophysical properties of LCST ILs, their phase separation kinetics have not been investigated. In this work, we describe the macroscale phase separation kinetics (phase separation time) by gleaning insight into the microscale colloidal behavior of aqueous mixtures of four different materials, P 4444 TFA (tetrabutylphosphonium-2,4-trifluoroacetate), P 4444 DMBS (tetrabutylphosphonium-2,4-dimethyl-benzenesulfonate), N 4444 Sal (tetrabutylammonium salicylate), and P 4444 Sal (tetrabutylphosphonium salicylate) as a function of IL concentration at a separation temperature of 70 °C. We report the discontinuous microscale size distributions for each material and correlate their theoretical settling velocities to experimental phase separation times. The results indicate that a simple Stokes' law model can predict the phase separation time within reasonable accuracy. Overall, this work lays the foundation for understanding the micro- to macroscale phase separation behavior and kinetics of LCST ILs for various water-energy applications.

LCST↗

DOE OSTI2025

A temperature-induced hysteretic behavior of resistivity and magnetoresistance of electrodeposited bismuth microbridges for X-ray transition-edge sensor absorbers

This study investigates the temperature-induced hysteretic behavior of resistivity and magnetoresistance in electrodeposited bismuth films, with a focus on their application as absorbers in transition-edge sensors (TESs) for X-ray detection. Through a series of resistivity versus temperature measurements from room temperature to a few Kelvin, we explore the change in the conductive behavior of bismuth electrodeposited on various substrates. Our findings show for the first time both hysteretic and irreversible changes in resistivity as a function of temperature. Further, magnetoresistance measurements reveal notable variations in resistance behavior under different magnetic fields, highlighting the impact of magnetic fields on these films’ electronic transport properties, with an indication of potential weak anti-localization effects at the lowest temperatures. This study not only provides a deeper understanding of bismuth’s conductivity characteristics at low temperatures but also sheds light on the practical implications for developing more effective TESs for synchrotron X-ray facilities.

42 ENGINEERING↗