Search NASA⌕ Search

SEARCH · Search NASA

Results for “exercise”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Quenching-Induced Defects Liberate the Latent Reversible Capacity of Lithium Titanate Anode

Interest in defect engineering for lithium-ion battery (LIB) materials is sparked by its ability to tailor electrical conductivity and introduce extra active sites for electrochemical reactions. However, harvesting excessive intrinsic defects in the bulk of the electrodes rather than near their surface remains a long-standing challenge. Here, a versatile strategy of quenching is demonstrated, which is exercised in lithium titanate (Li 4 Ti 5 O 12 , LTO), a renowned anode for LIBs, to achieve off-stoichiometry in the interior region. In situ synchrotron analysis and atomic-resolution microscopy reveal the enriched oxygen vacancies and cation redistribution after ice-water quenching, which can facilitate the native unextractable Li ions to participate in reversible cycling. Further, the fabricated LTO anode delivers a sustained capacity of 202 mAh g -1 in the 1.0–2.5 V range with excellent rate capability and overcomes the poor cycling stability seen in conventional defective electrodes. The feasibility of tuning the degree of structural defectiveness via quenching agents is also proven, which can open up an intriguing avenue of research to harness the intrinsic defects for improving the energy density of rechargeable batteries.

25 ENERGY STORAGE↗
DOE OSTI2026

Revealing the Defect‐Driven Ferroelectric Mechanisms of Aluminum Nitride

Wurtzite III-nitride compounds are CMOS-compatible with widespread industrial interest to exercise ferroelectricity, despite their polar structure being highly resistant to polarization reversal. Here, we induce and tune ferroelectric properties in w-AlN via direct-write ion-beam processing, using nanoscale patterned defect engineering as a post-growth alternative to conventional cation substitution. Nanometric piezoresponse spectroscopy of the focused He + beam patterned defect concentrations in ferroelectric Al 0.92 B 0.08 N measures a localized 10x enhancement in effective piezoresponse and 40% reduction in switching barrier. The irradiation-induced point defects convert piezoelectric AlN into a ferroelectric system with site-saturated nucleation and raise the dielectric susceptibility, switched polarization, and effective piezoelectric coefficient. Enhanced defect-lattice interactions in AlN increase carrier conduction and phonon scattering loss but preserve long-range crystallinity. Here, based on atomistic analysis of nudged elastic band density functional theory calculations and reactive force field simulations, both nitrogen vacancies and defect complexes disrupt bond ordering, facilitating a line-by-line low-barrier switching of pristine AlN.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Experimental and computational design tools for industrial drying processes: Challenges in process‐limit prediction

Abstract The coating and drying of inks and slurries are important steps to manufacture a plethora of products. Drying processes, particularly, comprise energy‐intensive steps that affect product cost and quality. Prior work has highlighted failures of various multicomponent diffusivity models to conserve mass in dryer modeling and challenges in predicting process limits given variability in published values of key thermodynamic parameters. Herein, we develop a computational model and benchtop drying experiments to investigate these concerns for drying polymer‐laden coatings. Model predictions of process limits in a single‐zone drying oven demonstrate that published variability in Flory–Huggins parameter yields large variations in predicted operating temperatures above which blistering occurs. This indicates that caution should be exercised when choosing approaches to obtain or predict the Flory–Huggins parameter, and that both benchtop drying experiments and a set of additional experiments, such as sorption experiments, are needed to fully characterize and optimize a given drying process.

Parrish, Chance↗
DOE OSTI2023

Design, scaling and cost evaluations of circulating fluidized-bed systems for biomass pyrolysis

To generate updated and transparent capital cost estimates for biomass fast pyrolysis equipment, refinery fluidized catalytic cracking design and sizing principles are examined and extended to pyrolysis of woody biomass. Capital costs for the sized equipment are estimated with process-industry software. A one-dimensional flow simulation with pyrolysis kinetics is leveraged to validate the fluidization conditions and thermal energy balance. After successful sizing and a system cost estimate of $\$$2.8 M (in 2016 US$\$$) at the biorefinery scale of 1000 metric tons per day (MTD), these methods were exercised for even smaller equipment at the distributed pyrolysis scale with modifications to the process design constraints, and not directly comparable with the 1000 MTD case, arriving at capital cost estimates of $\$$1.2 M for a 500 ton/day system and $\$$0.9 M for a 200 ton/day system. Here in this work, It is noted that this work only estimates purchased equipment costs at the ±50% accuracy level; there are significant other custom factors applicable to each installation based on location, maturity, scale, complexities during installation, engineering and licensing costs, etc. that need to be added on to these estimates to derive investment costs.

09 BIOMASS FUELS↗
DOE OSTI2023

A step towards the final frontier: Lessons learned from acceptance testing of the first HPE/Cray EX 3000 system at ORNL

Summary In this article, we summarize the deployment of the Air Force Weather (AFW) HPC11 system at Oak Ridge National Laboratory (ORNL) including the process followed to successfully complete acceptance testing of the system. HPC11 is the first HPE/Cray EX 3000 system that has been successfully released to its user community in a federal facility. HPC11 consists of two identical 800‐node supercomputers, Fawbush and Miller, with access to two independent and identical lustre parallel file systems. HPC11 is equipped with Slingshot 10 interconnect technology and relies on the HPE Performance Cluster Manager software for system configuration. ORNL has a clearly defined acceptance testing process used to ensure that every new system deployed can provide the necessary capabilities to support user workloads. We worked closely with HPE and AFW to develop a set of tests that used the United Kingdom's Meteorological Office's Unified Model and 4‐dimensional variational data assimilation. We also included benchmarks and applications from the Oak Ridge Leadership Computing Facility portfolio to fully exercise the HPE/Cray programming environment and evaluate the functionality and performance of the system. Acceptance testing of HPC11 required parallel execution of each element on Fawbush and Miller. In addition, careful coordination was needed to ensure successful acceptance of the newly deployed lustre file systems alongside the compute resources. In this work, we present test results from specific system components and provide an overview of the issues identified, challenges encountered, and the lessons learned along the way.

Melesse Vergara, Verónica G.↗
DOE OSTI2024

h5bench: A unified benchmark suite for evaluating HDF5 I/O performance on pre‐exascale platforms

Summary Parallel I/O is a critical technique for moving data between compute and storage subsystems of supercomputers. With massive amounts of data produced or consumed by compute nodes, high‐performant parallel I/O is essential. I/O benchmarks play an important role in this process; however, there is a scarcity of I/O benchmarks representative of current workloads on HPC systems. Toward creating representative I/O kernels from real‐world applications, we have created h5bench , a set of I/O kernels that exercise hierarchical data format version 5 (HDF5) I/O on parallel file systems in numerous dimensions. Our focus on HDF5 is due to the parallel I/O library's heavy usage in various scientific applications running on supercomputing systems. The various tests benchmarked in the h5bench suite include I/O operations (read and write), data locality (arrays of basic data types and arrays of structures), array dimensionality (one‐dimensional arrays, two‐dimensional meshes, three‐dimensional cubes), I/O modes (synchronous and asynchronous). In this paper, we present the observed performance of h5bench executed along several of these dimensions on existing supercomputers (Cori and Summit) and pre‐exascale platforms (Perlmutter, Theta, and Polaris). h5bench measurements can be used to identify performance bottlenecks and their root causes and evaluate I/O optimizations. As the I/O patterns of h5bench are diverse and capture the I/O behaviors of various HPC applications, this study will be helpful to the broader supercomputing and I/O community.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2022

On the Sensitivity to Density-Functional Approximations for CO Binding Energies of Single-Atom Catalysts in Nitrogen-Doped Graphene

Density functional theory (DFT) methods are the working horse in screening new catalytic materials. They are widely used to predict trends in binding energies, which are then used to compare the activity of different materials. Here, the binding strength of CO is an important descriptor to the CO 2 reduction catalytic activity of the single transition metal atoms embedded on nitrogen-doped graphene (TM/NG). In this work, however, we show that CO binding strengths in different TM/NG has very different sensitivity to DFT methods. Specifically, Fe/NG CO binding energy changes dramatically with the percentage of exact exchange in the functional; Co/NG does less so, while Ni/NG nearly has no change. Such varying behaviors is a direct result of different local spin configurations, similar to the performance of DFT methods for metal porphyrin complexes. Therefore, caution should be exercised when using DFT binding energies for quantitative predictions in TM/NG single atom catalysis.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2020

Evolution of Electric Sector Water Use Under Alternative Electricity Futures

Increasing competition for water resources in the United States could create future challenges for allocating and using thermal cooling water in the U.S. electric power sector. While thermal power plant retirements and the growth of wind and solar technologies can reduce national aggregate power sector cooling water use, local water constraints and growing demand for agricultural or municipal supply could create greater needs for higher-cost alternative water supplies such as groundwater or recycled wastewater. For some regions, these incentives could change future electricity planning and operational decisions. These relationships and impacts are studied here using the National Renewable Energy Laboratory (NREL) Regional Energy Deployment System (ReEDS), a national electric sector planning model that has recently been upgraded to include a highly detailed representation of thermal cooling water demand and supply. Thermal power technologies are differentiated by both cooling technology and water source type to track and constrain thermal cooling water use in a way that incorporates both physical and legal water considerations in the United States. This capability is exercised under a range of electricity sector futures with alternative technology costs, fuel prices, and water constraints to illustrate ways that U.S. electric sector water use could evolve under uncertain future electric sector drivers. In exploring changes to regional generation and transmission planning and operation, water requirements, and cost, we highlight the environmental and economic impacts of future power sector water decisions.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2024

A fast and sensitive size-exclusion chromatography method for plasma extracellular vesicle proteomic analysis

Extracellular vesicles (EVs) carry diverse biomolecules derived from their parental cells, making their components excellent biomarker candidates. However, purifying EVs is a major hurdle in biomarker discovery since current methods require large amounts of samples, are time-consuming and typically have poor reproducibility. Here we describe a simple, fast, and sensitive EV fractionation method using size exclusion chromatography (SEC) on a fast protein liquid chromatography (FPLC) system. Our method uses a Superose 6 Increase 5/150, which has a bed volume of 2.9 mL. The FPLC system and small column size enable reproducible separation of only 50 µL of human plasma in 15 min. To demonstrate the utility of our method, we used longitudinal samples from a group of individuals who underwent intense exercise. A total of 838 proteins were identified, of which, 261 were previously characterized as EV proteins, including classical markers, such as cluster of differentiation (CD)9 and CD81. Quantitative analysis showed low technical variability with correlation coefficients greater than 0.9 between replicates. The analysis captured differences in relevant EV proteins involved in response to physical activity. Our method enables fast and sensitive fractionation of plasma EVs with low variability, which will facilitate biomarker studies in large clinical cohorts.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2026

Physical Modeling and Design of a Nonvolatile Optically Gated High‐Power Diamond Transistor

In this work, we present the theory and modeling framework of a diamond optically gated junction field‐effect transistor (DOGFET). The device utilizes nitrogen substitutional centers in type‐1b diamond to optically modulate a p‐ boron doped diamond channel. Using sub‐gap lasers with intensities as low as 100 W/cm 2 , electrons are optically excited from substitutional nitrogen sites to the conduction band of the diamond substrate, thus enabling the optical gate to exercise control on modulating the space‐charge region at the junction and therefore the channel conductivity. We show that the device can deliver a current of 7 μA/μm, or equivalently 1750 A/cm 2 , while switching at a frequency greater than 100 kHz, in a form factor of 5 μm 2 . The breakdown voltage is found to be greater than 1850 V, with a breakdown field strength of ~13 MV/cm. Moreover, the device supports nonvolatile operation with a “memory effect” enabling single transistor state retention. The presented simulation framework provides a physically grounded insight into the limits and opportunities of optoelectronic diamond systems.

Engineering - Electronic and electrical engineerin↗
DOE OSTI2024

Implementation and Validation of a Generalized Actuator Disk Parameterization for Wind Turbine Simulations Within the FastEddy Model

ABSTRACT Fast and accurate large‐eddy simulation (LES) of the atmospheric boundary layer plays a crucial role in advancing wind energy research. Long‐duration wind farm studies at turbine‐resolving scales have become increasingly important to understand the intricate interactions between large wind farms and the atmospheric boundary layer. However, the prohibitive computational cost of these turbulence‐ and turbine‐resolving simulations has precluded such modeling to be exercised on a regular basis. To that end, we implement and validate the generalized actuator disk (GAD) model in the computationally efficient, graphics processing unit (GPU)–resident, LES model FastEddy. We perform single‐turbine simulations under three atmospheric stabilities (neutral, unstable, and stable) and compare them against observations from the Scaled Wind Farm Technology (SWiFT) facility and other LES codes from the recent Wakebench turbine wake model benchmark. Our idealized LES results agree well with observed wake velocity deficit and downstream recovery across stability regimes. Turbine response in terms of rotational speed, generated power, torque, and thrust coefficient are well predicted across stability regimes and are consistent with the LES results from the benchmark. The FastEddy simulations are found to be at least two orders of magnitude more efficient than the traditional CPU‐based LES models, opening the door for realistic LES simulations of full wind plants as a viable standard practice.

17 WIND ENERGY↗
DOE OSTI2023

Collaboration and Negotiation

Collaboration and Negotiation is a critical high-level function of an Autonomous Intelligent Cyber-Defense Agent (AICA) that enables communication among agents, central cyber C2, and human operators. Maintaining the Confidentiality, Integrity, and Availability (CIA) triad while achieving mission goals requires stealthy AICA agents to exercise: 1) minimal communication as needed for avoiding detection, 2) verification of information received with possibly limited resources, and 3) active learning during operations to address dynamic conditions. Moreover, negotiations to jointly identify and execute a Course of Action (COA) solution will require building consensus under distributed and/or decentralized multiagent settings with information uncertainties. This chapter presents algorithmic approaches for enabling the collaboration and negotiation function. Strengths and limitations of potential techniques are identified, and a representative example is illustrated. Recommendations for future development are also discussed.

Chatterjee, Samrat↗
DOE OSTI2022

On extraction of twist-two Compton form factors from DVCS observables through harmonic analysis

We investigate the exercise of locally extracting the real and imaginary parts of the four twist-2 Compton form factors (CFFs) {$\mathcal{H,E,\tilde H,\tilde E}$} which arise in the deeply virtual Compton scattering (DVCS) process e + p → e + p + y. Neglecting dynamical higher-twist contributions, we find that there are a sufficient number of DVCS observables and degrees of freedom to extract all 8 leading quantities model-independently, exploiting the azimuthal dependence of the absolute cross sections across all possible beam and target polarizations at a common kinematical point in {Q, t,x b , y}. As an example, for typical JLab lab-frame kinematics, we simplify the reduced DVCS observables to their dominant terms, providing a sufficient number of equations for local determination of the twist-2 CFFs. We demonstrate the feasibility using harmonic fitting to both cross sections and beam spin asymmetries with both real and pseudo-data.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2021

Covariant color-kinematics duality

We show that color-kinematics duality is a manifest property of the equations of motion governing currents and field strengths. For the nonlinear sigma model (NLSM), this insight enables an implementation of the double copy at the level of fields, as well as an explicit construction of the kinematic algebra and associated kinematic current. As a byproduct, we also derive new formulations of the special Galileon (SG) and Born-Infeld (BI) theory. For Yang-Mills (YM) theory, this same approach reveals a novel structure — covariant color-kinematics duality — whose only difference from the conventional duality is that 1/$\square$ is replaced with covariant 1/D 2 . Remarkably, this structure implies that YM theory is itself the covariant double copy of gauged biadjoint scalar (GBAS) theory and an F 3 theory of field strengths encoding a corresponding kinematic algebra and current. Directly applying the double copy to equations of motion, we derive general relativity (GR) from the product of Einstein-YM and F 3 theory. This exercise reveals a trivial variant of the classical double copy that recasts any solution of GR as a solution of YM theory in a curved background. Covariant color-kinematics duality also implies a new decomposition of tree-level amplitudes in YM theory into those of GBAS theory. Using this representation we derive a closed-form, analytic expression for all BCJ numerators in YM theory and the NLSM for any number of particles in any spacetime dimension. By virtue of the double copy, this constitutes an explicit formula for all tree-level scattering amplitudes in YM, GR, NLSM, SG, and BI.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2020

Development of limited-view tomography for measurement of Spray G plume direction and liquid volume fraction

Abstract The method for direct injection of fuel in the cylinder of an IC engines is important to high-efficiency and low-emission performance. Optical spray diagnostics plays an important role in understanding plume movement and interaction for multi-hole injectors, and providing baseline understanding used for computational optimization of fuel delivery. Traditional planar or line-of-sight diagnostics fail to capture the liquid distribution because of optical thickness concerns. This work proposes a high-speed (67 kHz) extinction imaging technique at various injector rotations coupled to computed tomography (CT) for time-resolved reconstruction of liquid volume fraction in three dimensions. The number of views selected and processing were based on synthetic (modeled) liquid volume fraction data where extinction and CT adequately reconstructed each plume. The exercise showed that for an 8-hole, symmetric-design injector (ECN Spray G), only three different views are enough to reproduce the direction of each plume, and particularly the mean plume direction. Therefore, the number of views was minimized for experiments to save expense. Measurements applying this limited-view technique confirm plume–plume variations also detected with mechanical patternation, while providing better spatial and temporal resolution than achieved previously. Uncertainties due to the limited view within pressurized spray chambers, the droplet size, and optically thick regions are discussed. Graphic abstract

42 ENGINEERING↗
DOE OSTI2023

Towards understanding the robust strengthening of ENSO and more frequent extreme El Niño events in CMIP6 global warming simulations

The El Niño Southern Oscillation (ENSO) has profound impacts on weather patterns across the globe, yet there is no consensus on its response to global warming. Several modelling studies find a stronger ENSO in global warming scenarios, while other studies suggest ENSO weakening. Using a broad range of models from the Coupled Model Intercomparison Project phase 6 (CMIP6) and four types of warming experiments, here we show that the majority of the models predict a stronger ENSO by century-end in Shared Social Pathway (SSP) experiments, and in idealized 1pctCO 2 and abrupt 4xCO 2 experiments. Several models, however, do predict no change or ENSO weakening, especially in the idealized experiments. Critically, the strongest forcing (abrupt-4xCO 2 ) does not induce the strongest ENSO response, while differences between the models are much greater than those between warming scenarios. For the long-term response (over 1000 years) the models disagree even on the sign of change. Furthermore, changes in ENSO sea surface temperature (SST) variability are only modestly correlated with the tropical Pacific mean state change. The highest correlation for ENSO SST amplitude is found with the mean zonal SST gradient in the SSP5-8.5 experiment (R = –0.58). In contrast, changes in ENSO rainfall variability correlate well with changes in the mean state, as well as with changes in ENSO SST variability. When evaluating the Bjerknes Stability Index for a subset of models, we find that it is not a reliable predictor of ENSO strengthening, as this index tends to predict greater stability with warming. We argue that the enhanced ENSO stability is offset by increases in atmospheric noise or/and potential nonlinear effects. However, a robust inter-model mechanism that can explain a stronger ENSO simulated with global warming is still lacking. Therefore, caution should be exercised when considering ENSO changes based on a single model or warming scenario.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Speeding-up fuzzing through directional seeds

Abstract Fuzzing is an automated process for discovering inputs in a program that may trigger unexpected behavior. Today, fuzzing has become a standard practice for the discovery of bugs and security vulnerabilities. However, the main issue with such practices is that the exploration of the input space of programs can often be prohibitively expensive. Therefore, several alternative fuzzing strategies have been introduced during the last few years. Some fuzzing techniques rely on human expertise to provide a plausible set of initial input examples, namely, seeds. However, the process of handcrafting seeds for fuzzing purposes often becomes strenuous for humans as it requires a deeper understanding of the Program-Under-Test (PUT). Also, the use of known inputs to programs often does not trigger vulnerable program behavior or may not reach potentially vulnerable code locations. To address those issues, we propose a seed generation framework that enables Human-In-The-Loop (HITL) directed fuzzing where the human assumes a more active role in the creation of seeds that can penetrate and assess desired locations of the PUT. Our proposed framework uses Symbolic Execution (SE) to generate seeds that exercise paths to target program locations. Moreover, our framework enables the visualization of the explored execution paths in the binary of the PUT for the generated seeds. We evaluated our approach on a set of 12 carefully designed C programs with diverse characteristics that mimic real-world programs. The experimental results show the effectiveness of the proposed approach in improving the performance of standard fuzzing tools such as the American Fuzzy Lop ("Image missing" <#comment/> ). Specifically, our solution can generate seeds that substantially enhance the performance of the fuzzer, achieving speedups ranging from $$1.46\times $$ 1.46 × to $$68.53\times $$ 68.53 × for branch conditions, $$1.39\times $$ 1.39 × to $$254.62\times $$ 254.62 × for branch depths, $$14,879.59\times $$ 14 , 879.59 × to $$30,295.88\times $$ 30 , 295.88 × for branch widths over traditional seeds. Additionally, the speedup increases with the number of target function ranging from $$12,260\times $$ 12 , 260 × to $$22,856.07\times $$ 22 , 856.07 × over traditional seeds while only requiring less than 15 seconds on average for the seed generation step.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2020

Calibration of hyperelastic constitutive models: the role of boundary conditions, search algorithms, and experimental variability

The calibration of hyperelastic constitutive models of soft tissue and tissue surrogates is often treated as an exercise in curve-fitting to the average experimental response, and many of the complicating factors such as experimental boundary conditions and data variability are ignored. Here, we focus on three questions that arise in this area: the ramifications of ignoring the experimental boundary conditions, the use of local optimizers, and the role of data variability. Using data from a uniaxial extension experiment on a tissue surrogate, we study how these three factors affect the calibration of isotropic hyperelastic constitutive models. Our results show that even with the simplest of constitutive models, it is necessary to look beyond a "good fit" to the average.

60 APPLIED LIFE SCIENCES↗