Search NASA⌕ Search

SEARCH · Search NASA

Results for “interlayer”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13

Role of Mg interlayers in Fe/Mg/MgO/Fe and Fe/Mg/MgO/Mg/Fe magnetic tunnel junctions

-Fe(001)/Mg/MgO/Fe- and -Fe(001)/Mg/MgO/Mg/Fe- magnetic tunnel junctions (MTJs) with Mg interlayers are studied by first-principles calculation. An important role of the Mg interlayer is identified to be preserving the preferential transmission of the majority-spin states with \Delta_1 symmetry, which dominate the spin-dependent electron transport of MTJs with MgO barrier. One layer of Mg at the electrode/barrier interface does not decrease the tunneling magnetoresistance (TMR) ratio nearly as much as one layer of oxide. At certain Mg thickness case the TMR could be strongly influenced by the resonance tunneling states in minority-spin channel, these states are mainly raised from the quantum-well states formed in the Mg interlayer and coupled with interfacial resonance states which are very sensitive to the interface structures.

36 MATERIALS SCIENCE↗

Structure and energetics of interlayer dislocations in bilayer graphene

We present a general hybrid model based upon the continuum generalized Peierls-Nabarro model (with density functional theory parametrization) to describe interlayer dislocations in bilayer systems. In this model, the bilayer system is divided into two linear elastic 2D sheets. The strains in each sheet can be relaxed by both elastic in-plane deformation and out-of-plane buckling; this deformation is described via classical linear elastic thin plate theory. The interlayer bonding between these two sheets is described by a three-dimensional generalized stacking-fault energy (GSFE) determined from first principle calculations and based upon the relative displacement between the sheets. The structure and energetics of various interlayer dislocations in bilayer graphene was determined by minimizing the elastic and bonding energy with respect to all displacements. The dislocations break into partials, and pronounced buckling is observed at the partial dislocation locations to relax the strain induced by their edge components. Here, the partial dislocation core width is reduced by buckling. An analytical model is also developed based upon the results obtained in numerical simulation. We develop an analytical model for the bilayer structure and energy and show that these predictions are in excellent agreement with the numerical results.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Theory of optical absorption by interlayer excitons in transition metal dichalcogenide heterobilayers

In this paper, we present a theory of optical absorption by interlayer excitons in a heterobilayer formed from transition metal dichalcogenides. The theory accounts for the presence of small relative rotations that produce a momentum shift between electron and hole bands located in different layers, and a moire pattern in real space. Because of the momentum shift, the optically active interlayer excitons are located at the moire Brillouin zone's corners, instead of at its center, and would have elliptical optical selection rules if the individual layers were translationally invariant. We show that the exciton moire potential energy restores circular optical selection rules by coupling excitons with different center of mass momenta. A variety of interlayer excitons with both senses of circular optical activity, and energies that are tunable by twist angle, are present at each valley. The lowest energy exciton states are generally localized near the exciton potential energy minima. Finally, we discuss the possibility of using the moire pattern to achieve scalable two-dimensional arrays of nearly identical quantum dots.

36 MATERIALS SCIENCE↗

Interlayer Pairing Symmetry of Composite Fermions in Quantum Hall Bilayers

Here, we study the pairing symmetry of the interlayer paired state of composite fermions in quantum Hall bilayers. Based on the Halperin-Lee-Read (HLR) theory, the effect of the long-range Coulomb interaction and the internal Chern-Simons gauge fluctuation is analyzed with the random-phase approximation beyond the leading order contribution in small momentum expansion, and we observe that the interlayer paired states with a relative angular momentum $l=+1$ are energetically favored for filling ν=$\frac{1}2$+$\frac{1}2$ and $\frac{1}4$+$\frac{1}4$. The degeneracy between states with $±l$ is lifted by the interlayer density-current interaction arising from the interplay of the long-range Coulomb interaction and the Chern-Simons term in the HLR theory.

36 MATERIALS SCIENCE↗

Infrared Interlayer Exciton Emission in MoS 2 / WSe 2 Heterostructures

Here, we report light emission around 1 eV (1240 nm) from heterostructures of MoS 2 and WSe 2 transition metal dichalcogenide monolayers. We identify its origin in an interlayer exciton (ILX) by its wide spectral tunability under an out-of-plane electric field. From the static dipole moment of the state, its temperature and twist-angle dependence, and comparison with electronic structure calculations, we assign this ILX to the fundamental interlayer transition between the K valleys in this system. Our results gain access to the interlayer physics of the intrinsically incommensurate MoS 2 /WSe 2 heterostructure, including moiré and valley pseudospin effects, and its integration with silicon photonics and optical fiber communication systems operating at wavelengths longer than 1150 nm.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Interlayer magnetism in Fe 3-x GeTe 2

Fe 3 - x GeTe 2 is a layered van der Waals magnetic material with a relatively high ordering temperature and large anisotropy. While most studies have concluded the interlayer ordering to be ferromagnetic, there have also been reports of interlayer antiferromagnetism in Fe 3 - x GeTe 2 . In this work, we investigate the interlayer magnetic ordering by neutron diffraction experiments, scanning tunneling microscopy (STM) and spin-polarized STM measurements, density functional theory plus U calculations, and STM simulations. We conclude that the layers of Fe 3 - x GeTe 2 are coupled ferromagnetically and that in order to capture the magnetic and electronic properties of Fe 3 - x GeTe 2 within density functional theory, Hubbard U corrections need to be taken into account.

2-dimensional systems↗

Tuning the interlayer coupling in La 0.7 Sr 0.3 Mn 0.95 Ru 0.05 O 3 / LaNiO 3 multilayers with perpendicular magnetic anisotropy

In ferromagnetic oxide epitaxial multilayers, magnetic properties and interlayer coupling are determined by a variety of factors. Beyond the contribution of interlayer exchange coupling, strain and interfacial effects, such as structural reconstructions or charge transfer, play significant roles, resulting in complex magnetic behavior. In this study, the interlayer coupling of ferromagnetic La 0.7 ⁢Sr 0.3⁢ Mn 0.95 ⁢Ru 0.05 ⁢O 3 (LSMRO) layers (8 nm thick) was investigated, when separated by epitaxial spacers of paramagnetic metallic LaNiO 3 (LNO), in stacks exhibiting perpendicular magnetic anisotropy. By varying the thickness of the spacer, it was found that the coupling between two LSMRO layers changes from antiferromagnetic (with a 4-unit-cell-thick LNO spacer) to ferromagnetic (with a 6-unit-cell-thick LNO spacer). For multilayers comprising five LSMRO layers and a 4-unit-cell-thick LNO spacer, the antiferromagnetic coupling was preserved. However, the effective magnetic anisotropy changed, causing the magnetization to cant more towards the in-plane direction. Further, this behavior was corroborated by X-ray magnetic circular dichroism (XMCD) investigations at the Mn and Ni L 3 edges. The XMCD results indicated that the 4-unit-cell-thick LNO spacer in the multilayer become magnetically ordered, closely following the magnetization of adjacent LSMRO layers.

36 MATERIALS SCIENCE↗

Optical absorption of interlayer excitons in transition-metal dichalcogenide heterostructures

Interlayer excitons, electron-hole pairs bound across two monolayer van der Waals semiconductors, offer promising electrical tunability and localizability. Because such excitons display weak electron-hole overlap, most studies have examined only the lowest-energy excitons through photoluminescence. Here, we directly measured the dielectric response of interlayer excitons, which we accessed using their static electric dipole moment. We thereby determined an intrinsic radiative lifetime of 0.40 nanoseconds for the lowest direct-gap interlayer exciton in a tungsten diselenide/molybdenum diselenide heterostructure. We found that differences in electric field and twist angle induced trends in exciton transition strengths and energies, which could be related to wave function overlap, moiré confinement, and atomic reconstruction. Through comparison with photoluminescence spectra, this study identifies a momentum-indirect emission mechanism. Characterization of the absorption is key for applications relying on light-matter interactions.

42 ENGINEERING↗

Superconducting current in hybrid structures with an antiferromagnetic interlayer

It is shown experimentally that the superconducting current density in Nb/Au/Ca{sub 1-x}Sr{sub x}CuO{sub 2}/YBa{sub 2}Cu{sub 3}O{sub 7-{delta}} hybrid superconducting heterostructures with a Ca{sub 1-x}Sr{sub x}CuO{sub 2} anti-ferromagnetic (AF) cuprate interlayer is anomalously high for interlayer thicknesses d{sub M} = 10-50 nm and the characteristic damping length for superconducting correlations is on the order of 10 nm. The experimental results are explained on the basis of theoretical analysis of a junction of two superconductors (S' and S) connected by a magnetic multilayer with the AF ordering of magnetization in the layers. It is shown that with such a magnetization ordering, anomalous proximity effect determined by the singlet component of the condensate wavefunction may take place. As a result, the critical currents in S'/I/AF/S and S'/I/N/S structures (I denotes an insulator, and N, the normal metal) may coincide in order of magnitude even when the thickness of the AF interlayer considerably exceeds the decay length of the condensate wavefunction in ferromagnetic layers.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Porous Interlayers that Getter Surface-Segregating Species for Improved Silver Wetting, Adhesion, and Electrical Contact on Stainless Steel SOFC Components

Here, porous nickel interlayers or porous platinum interlayers were shown to promote the wetting, spreading, and adhesion of silver on alumina-forming ferritic stainless steel (AFFSS) and chromia-forming ferritic stainless steel (CFFSS). These interlayers resulted in dense, crack-free AFFSS|Ag-Ni|CFFSS and AFFSS|Ag-Pt|CFFSS braze joints that, after 300 h in 650 °C air, displayed shear strengths up to 70 MPa similar to, or larger than, those of AFFSS|Ag-CuO|CFFSS or AFFSS|Ag|CFFSS joints subjected to identical treatment. Similarly, after exposure to 25 cycles of (50 switches between) 12 h of 650 °C air and 12 h of 650 °C 4%H 2 –96%N 2 , AFFSS|Ag-Ni|CFFSS and AFFSS|Ag-Pt|CFFSS braze joints displayed shear strengths significantly larger than those of AFFSS|Ag-CuO|CFFSS or AFFSS|Ag|CFFSS joints subjected to identical treatment. In addition, nickel and platinum were found to chemically getter surface-segregating steel constituents, particularly Al from the AFFSS. As a result, Ag-Ni and Ag-Pt electrical contact resistances on AFFSS and CFFSS substrates were several orders of magnitude lower than those of conventional Ag-CuO reactive air brazes or Heraeus C8710 Ag contact pastes. Together, these results suggest that Ag-Pt and especially Ag-Ni may be useful for the fabrication of durable joints, seals, and/or electrical contacts in electrical/electrochemical devices exposed to high temperatures and/or variable oxygen partial pressure environments.

36 MATERIALS SCIENCE↗

Stabilization of Ni-YSZ Anodes in Solid Oxide Fuel Cells using an ALD-Grown Aluminum Titanate Interlayer

The effect of an Al 2 TiO 5 (ALT) interlayer between Ni and YSZ on enhancing the thermal stability of Ni-YSZ solid oxide fuel cell was examined. Atomic layer deposition (ALD) was used to provide precise control of the structure and thickness of the ALT interlayer. The study's findings demonstrate that a 2 nm thick ALT interlayer deposited by ALD does not adversely affect the cell's ohmic resistance and effectively prevents Ni sintering and the loss of active area during high-temperature heat treatments. ALT layers thicker than 2 nm, although they enhanced Ni stability, were found to impede oxygen ion transport in the electrode and significantly increase the ohmic resistance of the cell, leading to a decline in performance.

25 ENERGY STORAGE↗

Joining of materials with engineered interlayers

A reliable method to join a variety of different materials is developed which uses engineered coatings to produce strong bonds by solid-state techniques at low temperatures (300-400 C). The strong bonds are capable of accommodating the strains created between Si and most substrates due to differences in thermal expansion coefficients. The approach encompasses two phases: noble metal compliant interlayers and functionally gradient interlayer bonding. Preliminary results are presented and the Ag interlayer bonds are microstructurally characterized confirming that the planar magnetron sputtered coatings/bonds are fully dense and metallurgically sound.

Challenger, Kenneth D.↗

TEM Observation of the Ti Interlayer Between SiC Substrates During Diffusion Bonding

Diffusion bonding was carried out to join SiC to SiC substrates using titanium interlayers. In this study, 10 m and 20 m thick physical vapor deposited (PVD) Ti surface coatings, and 10 and 20 m thick Ti foils were used. Diffusion bonding was performed at 1250 C for PVD Ti coatings and 1200 C for Ti foil. This study investigates the microstructures of the phases formed during diffusion bonding through TEM and selected-area diffraction analysis of a sample prepared with an FIB, which allows samples to be taken from the reacted area. In all samples, Ti3SiC2, Ti5Si3Cx and TiSi2 phases were identified. In addition, TiC and unknown phases also appeared in the samples in which Ti foils were used as interlayers. Furthermore, Ti3SiC2 phases show high concentration and Ti5Si3Cx formed less when samples were processed at a higher temperature and thinner interlayer samples were used. It appears that the formation of microcracks is caused by the presence of intermediate phase Ti5Si3Cx, which has anisotropic thermal expansion, and by the presence of an unidentified Ti-Si-C ternary phase with relatively low Si content.

Tsuda, Hiroshi↗

TEM Analysis of Interfaces in Diffusion-Bonded Silicon Carbide Ceramics Joined Using Metallic Interlayers

Silicon Carbide (SiC) is a promising material for thermo-structural applications due to its excellent high-temperature mechanical properties, oxidation resistance, and thermal stability. However, joining and integration technologies are indispensable for this material in order to fabricate large size and complex shape components with desired functionalities. Although diffusion bonding techniques using metallic interlayers have been commonly utilized to bond various SiC ceramics, detailed microstructural observation by Transmission Electron Microscopy (TEM) of the bonded area has not been carried out due to difficulty in preparing TEM samples. In this study, we tried to prepare TEM samples from joints of diffusion bonded SiC ceramics by Focused Ion Beam (FIB) system and carefully investigated the interfacial microstructure by TEM analysis. The samples used in this study were SiC fiber bonded ceramics (SA-Tyrannohex: SA-THX) diffusion bonded with metallic interlayers such as Ti, TiMo, and Mo-B. In this presentation, the result of microstructural analysis obtained by TEM observations and the influence of metallic interlayers and fiber orientation of SA-THX on the joint microstructure will be discussed.

Silicon Carbide↗

Controlled wetting and spreading of metals on substrates using porous interlayers and related articles

The disclosure generally relates to a method of creating patterned metallic circuits (e.g., silver circuits) on a substrate (e.g., a ceramic substrate). A porous metal interlayer (e.g., porous nickel) is applied to the substrate to improve wetting and adhesion of the patterned metal circuit material to the substrate. The substrate is heated to a temperature sufficient to melt the patterned metal circuit material but not the porous metal interlayer. Spreading of molten metal circuit material on the substrate is controlled by the porous metal interlayer, which can itself be patterned, such as having a defined circuit pattern. Thick-film silver or other metal circuits can be custom designed in complicated shapes for high temperature/high power applications. The materials designated for the circuit design allows for a low-cost method of generating silver circuits other metal circuits on a ceramic substrate.

Nicholas, Jason Dale↗

Phase-Transition Interlayer Enables High-Performance Solid-State Sodium Batteries with Sulfide Solid Electrolyte

All-solid-state sodium (Na) batteries (ASSSBs) using sulfide-based solid electrolytes (SEs) have attracted intensive attention due to their superior safety, high energy density and low cost. However, interfacial issue is one of the biggest challenges to achieve high-performance sulfide-based ASSSBs due to the serious reactions between active Na metal and sulfide SEs at the interface. To address the interfacial challenges, we propose in this paper a simple and efficient approach by introducing a polymer electrolyte as an interlayer to stabilize the interface. Na 3 SbS 4 as a model sulfide SE is used to demonstrate the interlayer strategy to stabilize the interface by preventing the detrimental reactions and inhibiting Na dendrites. As a result, stable Na plating/stripping was observed in Na symmetric cells under the current density of 0.1 mA cm –2 . Moreover, ASSSBs with Na metal and TiS 2 electrode delivered long-term stability over 300 cycles remaining a specific capacity above 100 mAh g –1 , and FeS 2 ||Na cells exhibited an impressive specific capacity of up to 200 mAh g –1 after the 20th cycles. This work demonstrates an efficient strategy to address interfacial challenges between sulfide SEs and Na metal, which contributes to the development of ASSSBs in next-generation energy storage systems.

25 ENERGY STORAGE↗

Interfacial Characteristics of Efficient Bulk Heterojunction Solar Cells Fabricated on MoOx Anode Interlayers

The role of the interface between an MoOx anode interlayer and a polymer:fullerene bulk heterojunction is investigated. Processing differences in the MoOx induce large variations in the vertical stratification of the bulk heterojunction films. These variations are found to be inconsistent in predicting device performance, with a much better gauge being the quantity of polymer chemisorbed to the anode interlayer.

14 SOLAR ENERGY↗

Doped Interlayers for Improved Selectivity in Bulk Herterojunction Organic Photovoltaic Devices

Poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) is less selective for holes in inverted-architecture organic photovoltaic (OPV) than it is in a conventional-architecture OPV device due differences between the interfacial-PSS concentration at the top and bottom of the PEDOT:PSS layer. In this work, thin layers of polysulfonic acids are inserted between the P3HT:ICBA bulk heterojunction (BHJ) active layer and PEDOT:PSS to create a higher concentration of acid at this interface and, therefore, mimic the distribution of materials present in a conventional device. Upon thermal annealing, this acid layer oxidizes P3HT, creating a thin p-type interlayer of P3HT+/acid- on top of the BHJ. Using x-ray absorption spectroscopy, Kelvin probe and ellipsometry measurements, this P3HT+/acid- layer is shown to be insoluble in water, indicating it remains intact during the subsequent deposition of PEDOT:PSS. Current density - voltage measurements show this doped interlayer reduces injected dark current while increasing both open-circuit voltage and fill factor through the creation of a more hole selective BHJ-PEDOT:PSS interface.

14 SOLAR ENERGY↗