Search NASA⌕ Search

SEARCH · Search NASA

Results for “metallic cobalt”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Metal–Organic Framework-derived Atomic Metal Sites Promoting Sulfur Cathode for All-Solid-State Lithium–Sulfur Batteries

All-solid-state lithium–sulfur batteries (ASSLSBs) offer high energy density and intrinsic safety; however, they still face major challenges, including sluggish redox kinetics and poor sulfur utilization. Incorporating conductive materials into sulfur cathodes is an effective strategy to mitigate these limitations. Here, a highly conductive cobalt–nitrogen–doped carbon (Co–NC) derived from a metal–organic framework (MOF) is introduced to accelerate charge transfer and promote reversible sulfur conversion. Co−NC provides atomically dispersed Co–N sites and conductive carbon pathways that correlate with improved charge transfer, sulfur utilization, and rate capability. Co–NC@S cathode delivers 1499 mAh g–1 at C/20 with a high sulfur loading (5 mg cm–2) and retains 1292 mAh g–1 after five cycles (vs 443 mAh g–1 without Co–NC). Moreover, Co–NC derived ASSLSB achieves 903 mAh g–1 at 5C at 60 °C. This work provides a practical and effective approach to develop high energy, high-rate ASSLSBs.

25 ENERGY STORAGE↗
DOE OSTI2020

Entangled Electrons Drive a Non-superexchange Mechanism in a Cobalt Quinoid Dimer Complex

A central theme in chemistry is the understanding of the mechanisms that drive chemical transformations. A well-known, highly cited mechanism in organometallic chemistry is the superexchange mechanism in which unpaired electrons on two or more metal centers interact through an electron pair of the bridging ligand. We use a combination of novel synthesis and computation to show that such interactions may in fact occur by a more direct mechanism than superexchange that is based on direct quantum entanglement of the two metal centers. Specifically, we synthesize and experimentally characterize a novel cobalt dimer complex with benzoquinoid bridging ligands and investigate its electronic structure with the variational two-electron reduced density matrix method using large active spaces. The result draws novel connections between inorganic mechanisms and quantum entanglement, thereby opening new possibilities for the design of strongly correlated organometallic compounds whose magnetic and spin properties have applications in superconductors, energy storage, thermoelectrics, and spintronics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Hydride and Seek: Comparing Crystallographic Hydride Placement Techniques with an Open-Shell Cobalt Complex

Locating hydrides is crucial in organometallic chemistry but difficult to do accurately using X-ray diffraction. Electron diffraction has been proposed as a way to overcome this problem but has not been systematically compared to neutron diffraction and to quantum crystallography (Hirshfeld atom refinement, HAR) to test this hypothesis. Here, we present a comparative analysis of methods for a terminal cobalt hydride complex by comparing a single-crystal neutron diffraction reference structure to results from single-crystal X-ray diffraction with and without Hirshfeld atom refinement (HAR, NoSpherA2), density functional theory (DFT), and electron diffraction (3D-ED/MicroED) refined under kinematical and dynamical formalisms. Conventional X-ray diffraction gives lower precision than neutron diffraction as expected. Despite expected improvements, HAR gives systematic deviation from the neutron benchmark. Interestingly, optimized DFT equilibrium geometries are closer to the neutron value than the value from HAR. On the other hand, electron diffraction with a high-quality data set coupled with dynamical refinement localizes the hydride in difference maps and gives excellent agreement with the neutron data. Dynamical refinement is crucial, as kinematical refinement does not allow assignment of a hydride peak. This cross-modal comparison defines the conditions under which 3D-ED/MicroED delivers high-precision metal–hydride distances for this open-shell cobalt hydride.

anions↗
DOE OSTI2024

Chemo-Mechanical Instabilities in Lithium Cobalt Oxide at Higher State-Of-Charge in Li-Ion Batteries

Transition metal oxide cathodes are widely used in commercial Li-ion batteries. However, their practical charge capacity is limited due to severe chemo-mechanical instabilities at higher charge voltage, and state-of-charge condition. Here, in situ stress and strain measurements were synchronized to probe mechanical deformations in the lithium cobalt oxide (LCO) cathode via a multi-beam stress sensor and digital image correlation, respectively. In situ mechanical measurements revealed how Li removal from the electrode structure induces deformations on the LCO composite cathodes during cycling. The structure and morphology of the LCO cathodes were further investigated by X-ray diffraction (XRD) and scanning electron microscopy (SEM) studies. Two distinct electrochemical and mechanical behaviors were identified when the LCO was charged up to 4.65 V. The LCO undergoes a compressive stress generation when charged up to 4.2 V and surface fractures on the LCO particles were detected by SEM. LCO cathode experienced significantly large contractions (negative strains) when charged up to 4.65 V, where intergranular crack formation and phase transformation were detected on the LCO particles via SEM and XRD, respectively. Overall, the study bridges complicated structural deformations with in situ analysis of mechanical degradations in LCO cathodes charged at higher voltages. The correlation is vital to understanding instability mechanisms in transition metal oxides at high voltages for alkali metal ion batteries.

higher state-of-charge↗
NASA NTRS1992

Size of metallic and polyethylene debris particles in failed cemented total hip replacements

Reports of differing failure rates of total hip prostheses made of various metals prompted us to measure the size of metallic and polyethylene particulate debris around failed cemented arthroplasties. We used an isolation method, in which metallic debris was extracted from the tissues, and a non-isolation method of routine preparation for light and electron microscopy. Specimens were taken from 30 cases in which the femoral component was of titanium alloy (10), cobalt-chrome alloy (10), or stainless steel (10). The mean size of metallic particles with the isolation method was 0.8 to 1.0 microns by 1.5 to 1.8 microns. The non-isolation method gave a significantly smaller mean size of 0.3 to 0.4 microns by 0.6 to 0.7 microns. For each technique the particle sizes of the three metals were similar. The mean size of polyethylene particles was 2 to 4 microns by 8 to 13 microns. They were larger in tissue retrieved from failed titanium-alloy implants than from cobalt-chrome and stainless-steel implants. Our results suggest that factors other than the size of the metal particles, such as the constituents of the alloy, and the amount and speed of generation of debris, may be more important in the failure of hip replacements.

Non-NASA Center↗
DOE OSTI2020

Structural and Electrochemical Impacts of Mg/Mn Dual Dopants on the LiNiO 2 Cathode in Li-Metal Batteries

Doping chemistry has been regarded as an efficient strategy to overcome some fundamental challenges facing the “no-cobalt” LiNiO 2 cathode materials. By utilizing the doping chemistry, we evaluate the battery performance and structural/chemical reversibility of a new no-cobalt cathode material (Mg/Mn-LiNiO 2 ). The unique dual dopants drive Mg and Mn to occupy the Li site and Ni site, respectively. We report the Mg/Mn-LiNiO 2 cathode delivers smooth voltage profiles, enhanced structural stability, elevated self-discharge resistance, and inhibited nickel dissolution. As a result, the Mg/Mn-LiNiO 2 cathode enables improved cycling stability in lithium metal batteries with the conventional carbonate electrolyte: 80% capacity retention after 350 cycles at C /3, and 67% capacity retention after 500 cycles at 2 C (22 °C). We then take the Mg/Mn-LiNiO 2 as the platform to investigate the local structural and chemical reversibility, where we identify that the irreversibility takes place starting from the very first cycle. The highly reactive surface induces the surface oxygen loss, metal reduction reaching the subsurface, and metal dissolution. Our data demonstrate that the dual dopants can, to some degree, mitigate the irreversibility and improve the cycling stability of LiNiO 2 , but more efforts are needed to eliminate the key challenges of these materials for battery operation in the conventional carbonate electrolyte.

25 ENERGY STORAGE↗
DOE OSTI2023

Synthesis, structure and canted antiferromagnetism of layered cobalt hydroxide sorbate

Layered hybrid organic–inorganic compounds of the transition metal hydroxides, in which part of the hydroxide ions are exchanged for organic ligands that act as spacers of the 2-dimensional inorganic layers, elicit new or enhanced properties. The interlayer ligands enable fine-tuning of the physicochemical properties of the metal hydroxide layers, including their magnetism. Specifically, within the Co(OH) 2 family of transition ion hydroxides, this approach has been leveraged to stabilize antiferromagnetic and ferrimagnetic ground states for pillared and layered complexes, respectively. Here, in this work, we further investigate the effects of changing dimensionality, local Co coordination, and interlayer spacing on the magnetic ground state of brucite-like β-Co(OH) layered complexes. We report the hydrothermal synthesis of a new crystalline material, Co(OH)(sorb), where the inorganic layers are spaced by monotopic, doubly unsaturated sorbate ligands (sorb = [C 6 H 7 O 2 ] – ). The material was structurally characterized using powder X-ray and neutron diffraction measurements and the crystal structure was solved ab initio from powder diffraction data and refined using the Rietveld method. The magnetic susceptibility and magnetization measurements reveal canted antiferromagnetic ordering with T N = 41.7 K. This report augments our understanding of tuning magnetism through dimensionality in layered complexes and represents a step forward in the design of new 2D layered hybrid compounds.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Interfacial Charge Transfer and Substrate-Dependent Oxidation States Drive SMSI Enhancements in Cobalt Oxide Films

Here, we investigated the mechanisms underlying strong metal-support interactions in CO oxidation using model systems where noble metal crystals support reducible, monolayer-thick CoO x films. The effect of the Co oxidation state, film thickness, and substrate identity were studied in varying reaction conditions using ambient pressure X-ray photoelectron spectroscopy. At low O 2 pressures, the same oxide phase forms on both Pt(111) and Au(111) surfaces. But when heated at higher O 2 pressures, the oxide phase depends on the substrate. We found that CoO x /Pt is more active for the CO oxidation reaction than CoO x /Au, even when both surfaces stabilize the same oxide phase. DFT calculations on these and related noble-metal-supported CoO x films reveal an SMSI-induced reactivity enhancement that strongly depends on the oxide film thickness and which is mediated by charge transfer between the metal and oxide. Charge transfer is also found to correlate with the reaction energy and activation barrier for CO oxidation. This effect was found to be greatest for oxide films on Pt, decreasing on other noble metal supports in the order Pt > Pd > Au > Ag, in agreement with the experiments. The role of charge transfer in the activation barriers and reaction energies provides insight into the nature of SMSI-induced catalytic activity, and suggests that the noble metal work function can serve as an indicator for the strength of SMSI effects.

36 MATERIALS SCIENCE↗
NASA NTRS1977

Aerothermal and structural performance of a cobalt-base superalloy thermal protection system at Mach 6.6

A flightweight, metallic thermal protection system (TPS) applicable to reentry and hypersonic vehicles was subjected to multiple cycles of both radiant and aerothermal heating in order to evaluate its aerothermal performance and structural integrity. Good structural integrity and thermal performance were demonstrated by the TPS under both a radiant and aerothermal heating environment typical of a shuttle entry. The shingle-slip joints effectively allowed for thermal expansion of the panel without allowing any appreciable hot gas flow into the TPS cavity. The TPS also demonstrated good structural ruggedness.

Sawyer, J. W.↗
DOE OSTI2025

Stepwise impregnation of bimetallic catalysts for carbon nanotube synthesis

Supported bimetallic catalysts are widely used for carbon nanotube (CNT) synthesis, yet the effects of impregnation procedure remain underexplored. Here, we investigated how the sequence of metal impregnation affects CNT synthesis. We prepared cobalt-molybdenum (Co-Mo) bimetallic catalysts on alumina supports via co- and stepwise impregnation, then compared their CNT synthesis performance under identical conditions. Stepwise-impregnated catalysts exhibited higher carbon yields than those prepared by co-impregnation. Notably, impregnating Mo after Co achieved the highest yield despite the lowest BET surface area. Synchrotron X-ray diffraction and visible/UV-Raman spectroscopy revealed that only this catalyst contained Al 2 (MoO 4 ) 3 with a MoO 4 structure. X-ray photoelectron spectroscopy clarified the surface chemistry: the catalyst with the highest CNT productivity exposed Mo entirely as Mo 6+ in Al 2 (MoO 4 ) 3 and CoMoO 4 , whereas the others contained both Mo 4+ and Mo 6+ . The MoO x species like Al 2 (MoO 4 ) 3 is known to suppress Co sintering during CNT synthesis, delaying catalyst deactivation and enhancing the carbon yield. Moreover, an inverse relationship was observed between carbon yield and the CoMoO 4 content. This is attributed to the consumption of catalytically active Co during CoMoO 4 formation, which reduces active sites for CNT growth. ICP-OES further confirmed higher Co and Mo loadings for stepwise catalysts, contributing to superior catalyst performance. The extent of CoMoO 4 formation strongly depended on the metal introduction sequence. In conclusion, this trend is illustrated by considering the relationship between the point of zero charge of support and the pH of the metal precursor solutions.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Task 12 PV Sustainability - Environmental Life Cycle Assessment of Residential PV and Battery Storage Systems

Using a life cycle assessment (LCA), the environmental impacts from generating 1 kWh of electricity for self-consumption via a photovoltaic-battery system are determined. The system includes a 10 kWp multicrystalline-silicon photovoltaic (PV) system (solar irradiation about 1350 kWh/m2/year and annual yield 1000 kWh/kWp), an iron phosphate lithium-ion (LiFePO4) battery, and other components such as the control system, battery housing, and two inverters (one for the PV system and one for the battery system). Three options for the AC-coupled system with changing battery capacities (5, 10, or 20 kWh nominal capacity) are investigated. The environmental impacts are assessed using the indicators greenhouse gas emissions and cumulative energy demand (separated into total and non-renewable cumulative energy demand). In addition, the four most important impact categories for PV electricity - respiratory inorganics (particulate matter), acidification, energy carrier resource use, and minerals and metals resource use - are assessed according to the environmental footprint (EF) method. Data are drawn from the DETEC data DQRv2:2018, recent literature, and product details provided by manufacturers. The results show larger environmental impacts of PV-battery systems with increasing battery capacity; for capacities of 5, 10, and 20 kWh, the cumulative greenhouse gas emissions from 1 kWh of electricity generation for self-consumption via a PV-battery system are 80, 84, and 88 g CO 2- eq/kWh, respectively. The cumulative greenhouse gas emissions of PV electricity consumed directly or fed into the grid are 54 g CO 2 -eq/kWh. The corresponding total cumulative energy demands are 5.27, 5.40, and 5.50 MJ oil-eq/kWh, with non-renewable energy carriers contributing 1.16, 1.22, and 1.29 MJ oil-eq/kWh. In the investigated EF impact categories, we similarly observe a larger environmental burden with increasing battery capacity, except in the use of minerals and metals. Our sensitivity analyses show that using a nickel cobalt manganese oxide (NCM) lithium-ion battery, instead of an LiFePO 4 battery, leads to a comparable environmental impact in terms of greenhouse gas emissions and cumulative energy demand. However, the NCM battery increases the impact in the EF categories of acidification and respiratory inorganics by 7 and 10%, respectively, whereas energy carrier resource use decreases by 4% and minerals and metals resource use decrease by 1%. Using a copper indium selenium (CIS) PV panel instead of a multicrystalline-silicon decreases greenhouse gas emissions by 24%, non-renewable cumulative energy demand by 13%, and particulate matter emissions by 60% (the largest decrease). Furthermore, the calculated environmental impacts are sensitive to the assumed battery lifetime. A decrease from 5000 to 3000 charge cycles increases non-renewable cumulative energy demand by 24% and greenhouse gas emissions by 16%. Increasing from 5000 to 7000 charge cycles decreases the environmental impacts by 6% and 7% in terms of non-renewable cumulative energy demand and greenhouse gas emissions, respectively. A utility-scale battery system case study shows that using batteries to store PV electricity overproduction reduces greenhouse gas emissions compared to using natural gas backup electricity generation.

14 SOLAR ENERGY↗
DOE OSTI2021

In Situ ATR-FTIR Study of the Cathode–Electrolyte Interphase: Electrolyte Solution Structure, Transition Metal Redox, and Surface Layer Evolution

We present a study of the lithium nickel manganese cobalt oxide (LiNi 0.6 Mn 0.2 Co 0.2 O 2 , NMC622) cathode-electrolyte interphase (CEI) during galvanostatic charging and discharging using in situ attenuated total reflectance Fourier transform infrared (ATR-FTIR) methods to investigate the voltage dependent electrolyte solution structure changes at the interface, transition metal (TM) redox chemistry, and cathode/electrolyte interfacial layer evolution. Furthermore, our in situ cell design provides both reliable electrochemical device testing and strong FTIR vibrational absorption signals near the cathode surface. Specifically, advanced spectral analysis elucidates changes of near-surface Li+ ion (de)solvation by solvent molecules during galvanostatic cycling. Moreover, cathode metal-oxygen vibrational absorptions, sensitive to TM redox behaviors and subsequent local structural variations, were correlated to cathode de-lithiation (and lithiation) and electrolyte solution structure changes. In addition, we have detected the formation and evolution of a CEI surface layer on the NMC622 cathode that contributes to the cell's capacity fade.

25 ENERGY STORAGE↗
DOE OSTI2023

Life-cycle analysis of battery metal recycling with lithium recovery from a spent lithium-ion battery

Demand for critical materials (nickel, cobalt, manganese [NCM], and lithium) for use in batteries is increasing rapidly due to the expansion of the battery-electric vehicles market. Battery metal recycling (BMR) is an important technology that can potentially realize environmental and economic benefits in cathode active material (LiNi x Mn y Co z O 2 ) production using recycled materials. While current major battery recycling technologies recover cathode materials (NCM) and other metals (steel, aluminum, copper, etc.) from the spent battery, the lithium (Li) recovery rate is less than 1% in the world. In this study, we analyze the environmental benefits of a BMR process that recovers lithium in the form of lithium hydroxide monohydrate (LiOH∙H 2 O) along with other cathode materials. Using life-cycle analysis (LCA), we evaluate the life-cycle greenhouse gas (GHG) emissions, criteria air pollutant emissions, and water consumption of the new BMR technology in terms of lithium hydroxide production and cathode active material production. The LCA results show that the life-cycle GHG emissions recycled LiOH are 37–72% lower than those of virgin LiOH production from Chilean brine and Australian ore, respectively. In addition, the life-cycle GHG emissions of NCM811 produced using the recycled materials are 40–48% lower compared to virgin cathode active material production. Furthermore, recovering lithium from the spent batteries reduces associated air pollutant emissions and water consumption relative to using the virgin materials or materials from other recycling technologies without LiOH recovery.

25 ENERGY STORAGE↗
DOE OSTI2022

Sequestering Rare Earth Elements and Precious Metals from Seawater Using a Highly Efficient Polymer Adsorbent Derived from Acrylic Fiber

An amidoxime and carboxylate containing polymer adsorbent derived from acrylic fiber has shown extremely high efficiencies for extracting critical materials and precious metals from seawater. Among 50 extractable elements, the lanthanides, cobalt, and palladium were ranked near the top with KD values in the order of 107, about an order of magnitude higher than that of uranium. The KD value of the lanthanides increased linearly with the atomic number indicating charge density is a factor controlling trivalent lanthanide extractability in seawater. The data given in this report provides crucial information regarding the strategies of ocean mining of critical materials and precious metals.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Operation of Layered LiCoO 2 to Higher Voltages with a Localized Saturated Electrolyte

The commercialization of lithium-ion batteries started with the layered LiCoO 2 (LCO) cathode for portable electronics, but only 50% of its theoretical capacity can be used in practical cells due to detrimental surface and bulk degradations when charged to high voltages. Here we demonstrate here that the stability of electrolyte plays a critical role in the performance of LCO at high voltages by employing a localized saturated electrolyte (LSE). With a cutoff voltage of 4.5 V, LCO achieves an initial 1C discharge capacity of 176 mA h g -1 and a capacity retention of 80% over 230 cycles. Even with a cutoff voltage of 4.6 V, LCO with 2% aluminum doping displays an initial discharge capacity of 189 mA h g -1 at 1C rate with 80% capacity retention over 137 cycles. With extensive analytical characterization, we show that the improved cycling stability stems from a suppression of the O3 to H1-3 phase transition as well as a robust inorganic-rich cathode-electrolyte interphase (CEI) facilitated by the LSE. This work highlights the importance of protecting the surface as well as the bulk with appropriate electrolytes for the high-voltage, higher-energy-density operation of LCO.

25 ENERGY STORAGE↗
DOE OSTI2022

Can Cobalt Be Eliminated from Lithium-Ion Batteries?

Following the discovery of LiCoO 2 (LCO) as a cathode in the 1980s, layered oxides have enabled lithium-ion batteries (LIBs) to power portable electronic devices that sparked the digital revolution of the 21st century. Since then, LiNi x Mn y Co z O 2 (NMC) and LiNi x Co y Al z O 2 (NCA) have emerged as the leading cathodes for LIBs in electric vehicle (EV) application and have become crucial components in the fight against global warming. However, the surging demand for LIBs has led to an extremely tight supply. The EV sector has already dominated the LIB market, even though EV sales were only 2–3% of total passenger vehicle sales in 2020. EV sales are expected to grow 10-fold by the end of this decade, and close to 90% of the total LIB demand will come from the EV sector. As a result, LIB manufacturers must aggressively ramp up cell production to keep pace with the immense growth of the EV market, a quest that brings scrutiny to the cost and sustainability of current LIB manufacturing practices. Here, cathodes are a critical component that largely determines the energy density and 40–50% of the total cell cost in LIBs. Rigorous consideration of the cathode performance and material cost is crucial in sustaining EV adoption. In this Viewpoint, we discuss why using cobalt in cathodes is unsustainable in the long run and highlight the features of cobalt-free cathodes.

25 ENERGY STORAGE↗
DOE OSTI2023

Ab initio study of short-range ordering in vanadium-based disordered rocksalt structures

Disordered rocksalt Li-excess (DRX) compounds are attractive new cathode materials for Li-ion batteries as they contain resource-abundant metals and do not require the use of cobalt or nickel. Understanding the delithiation process and cation short-range ordering (SRO) in DRX compounds is essential to improve these promising cathode materials. Herein, we use first-principles calculations along with the cluster-expansion approach to model the disorder in DRX Li 2-x VO 3 , 0 < x < 1. We discuss the SRO of Li in tetrahedral and octahedral sites, and the order in which Li delithiates and V oxidizes with respect to local environments. We reveal that the number of nearest-neighbor V dictates the order of delithiation from octahedral sites and that V is oxidized in a manner that minimizes the electrostatic interactions among V. In conclusion, our results provide valuable insight for tailoring the performance of V-based DRX cathode materials in general by controlling the SRO features that reduce energy density.

36 MATERIALS SCIENCE↗