Search NASA⌕ Search

SEARCH · Search NASA

Results for “GOALS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14
All sourcesNASA NTRSDOE OSTI
NASA NTRS2022

Charging Experiments and Filtration Testing on Facemask Materials: Towards Goals of Full Performance Restoration of Used N95 Masks and Enhancement of Common-Fabric Facemasks

Different techniques have been developed for sanitizing N95 masks while retaining whatever charge remains on them. However, these sanitizing methods do not address the fact that the electrical charge, filtration efficacy, and breathability of such masks may be expected to degrade during long-term use based on mechanisms known in the literature. In this study, approaches to electrically (re)charging facemask filter materials were explored in response to the COVID-19 induced shortage of N95 masks. The effort consisted of charging experiments followed by filtration testing conducted at the coupon level during a month-long period (May 2020). The main focus of the work was to develop a recharging technique which could eventually be adapted and used as part of a broader full-performance restoration process for used N95 masks, e.g., which might employ simple washing by alcohol or soapy water as a preceding step for sanitization and declogging. Most tested coupons were therefore nonwoven meltblown fibrous polypropylene (PP) filter media extracted from decades old N95 masks. Keeping in mind commonly used cloth facemasks, limited trials were also performed with some commercially available fabrics. Charging was done at elevated temperature and was followed by cooling to freeze in the applied charges produced from corona discharges using different electrode configurations and parameter combinations, or from triboelectric rubbing. Charging was also focused on using potentially scalable equipment, e.g., Van de Graaff generators or consumer ionic hair products. Some degree of success was achieved with one of the fabrics and the PP filter media which was first purposefully discharged to have typical filtration efficiency (FE) of ~35%. Numerous attempts at corona charging discharged media resulted in filtration efficiency (FE) ≥ 80 – 85%. Some measure of charge robustness was also established via stable performance during loading testing. However, results where FE ≥ 90% were not reliably repeatable and no results met the FE ≥ 95% goal due to shortcomings of the charging process. The best three trials for PP media statistically met the FE ≥ 90% criteria, amounted to a small percentage of the trials relying on an ionic hair dryer, and are attributed to good embedding of charges via aerodynamic force. Triboelectric charging significantly enhanced the viability of one of the polyester fabrics –measured FE increased from 19% up to 46% while maintaining a reasonably low pressure drop.

N95↗
NASA NTRS2020

Monitoring Water-Related Ecosystems with Earth Observation Data in Support of Sustainable Development Goal (SDG) 6 Reporting

Lack of national data on water-related ecosystems is a major challenge to achieving the Sustainable Development Goal (SDG) 6 targets by 2030. Monitoring surface water extent, wetlands, and water quality from space can be an important asset for many countries in support of SDG 6reporting. We demonstrate the potential for Earth observation (EO) data to support country reporting for SDG Indicator 6.6.1, ‘Change in the extent of water-related ecosystems over time’ and identify important considerations for countries using these data for SDG reporting. The spatial extent of water-related ecosystems, and the partial quality of water within these ecosystems is investigated for seven countries. Data from the Moderate Resolution Imaging Spectroradiometer (MODIS) and Landsat 5, 7, and 8 with Shuttle Radar Topography Mission (SRTM) are used to measure surface water extent at 250 m and 30 m spatial resolution, respectively, in Cambodia, Jamaica, Peru, the Philippines, Senegal, Uganda, and Zambia. The extent of mangroves is mapped at 30 m spatial resolution using Landsat 8 Operational Land Imager (OLI), Sentinel-1, and SRTM data for Jamaica, Peru, and Senegal. Using Landsat 8 and Sentinel 2A imagery, total suspended solids and chlorophyll-a are mapped overtime for a select number of large surface water bodies in Peru, Senegal, and Zambia. All of the EO datasets used are of global coverage and publicly available at no cost. The temporal consistency and long time-series of many of the datasets enable replicability over time, making reporting of change from baseline values consistent and systematic. We find that statistical comparisons between different surface water data products can help provide some degree of confidence for countries during their validation process and highlight the need for accuracy assessments when using EO-based land change data for SDG reporting. We also raise concern that EO data in the context of SDG Indicator 6.6.1reporting may be more challenging for some countries, such as small island nations, than others to use in assessing the extent of water-related ecosystems due to scale limitations and climate variability. Country-driven validation of the EO data products remains a priority to ensure successful data integration in support of SDG Indicator 6.6.1 reporting. Multi-country studies such as this one can be valuable tools for helping to guide the evolution of SDG monitoring methodologies and provide a useful resource for countries reporting on water-related ecosystems. The EO data analyses and statistical methods used in this study can be easily replicated for country-driven validation of EO data products in the future.

Raha Hakimdavar↗
NASA NTRS2022

Science Goals and New Mission Concepts for Future Exploration of Titan’s Atmosphere, Geology and Habitability: Titan POlar Scout/orbitEr and in Situ Lake Lander and DrONe Explorer (POSEIDON)

In response to ESA’s “Voyage 2050” announcement of opportunity, we propose an ambitious L-class mission to explore one of the most exciting bodies in the Solar System, Saturn’s largest moon Titan. Titan, a “world with two oceans”, is an organic-rich body with interior-surface-atmosphere interactions that are comparable in complexity to the Earth. Titan is also one of the few places in the Solar System with habitability potential. Titan’s remarkable nature was only partly revealed by the Cassini-Huygens mission and still holds mysteries requiring a complete exploration using a variety of vehicles and instruments. The proposed mission concept POSEI-DON (Titan POlar Scout/orbitEr and In situ lake lander DrONe explorer) would perform joint orbital and in situ investigations of Titan. It is designed to build on and exceed the scope and scientific/technological accomplishments of Cassini-Huygens, exploring Titan in ways that were not previously possible, in particular through full close-up and in situ coverage over long periods of time. In the proposed mission architecture, POSEIDON consists of two major elements: a spacecraft with a large set of instruments that would orbit Titan, preferably in a low-eccentricity polar orbit, and a suite of in situ investigation components, i.e. a lake lander, a “heavy” drone (possibly amphibious) and/or a fleet of mini-drones, dedicated to the exploration of the polar regions. The ideal arrival time at Titan would be slightly before the next northern Spring equinox (2039), as equinoxes are the most active periods to moni-tor still largely unknown atmospheric and surface seasonal changes. The exploration of Titan’s northern latitudes with an orbiter and in situ element(s) would be highly complementary in terms of timing (with possible mission timing overlap), locations, and science goals with the upcoming NASA New Frontiers Dragonfly mission that will provide in situ exploration of Titan’s equatorial regions, in the mid-2030s.

Sebastien Rodriguez↗
NASA NTRSDate not supplied

The Search for Extant Life on Mars as a Focusing Scientific Goal for Future Human Exploration Missions

A search for evidence of extant life on Mars provides a focusing goal for human exploration missions that are planned for the 2030s. Finding an example of extant life beyond Earth would be one of the greatest scientific discoveries of all time. Human exploration brings extraordinary improvements over robotic missions in both payload and analytical capability. Environments that may be habitable for modern life on Mars include salts and brines, ground ice, caves, and deep subsurface aquifers [Carrier et al. 2020]. The habitability case for each environment is reviewed as well as how human missions may enable the search. It is important to determine if life exists on Mars prior to human exploration activities to prevent both the risk to Earth of inadvertently bringing potentially harmful organisms from Mars, risks to astronaut health, and the complication of recognizing Mars life once terrestrial contamination has occurred.

C.R. Stoker↗
NASA NTRSDate not supplied

Scope and Goals of NASA's Quesst Community Test Campaign with the X-59 Aircraft

In its mission to expand knowledge and improve aviation, NASA conducts research to address sonic boom noise, the prime barrier to overland supersonic flight. For half a century, civilian aircraft have been required to fly slower than the speed of sound when over land to prevent sonic boom disturbances to communities under the flight path. However, lower noise levels may be achieved via new aircraft shaping techniques that reduce the merging of shockwaves generated during supersonic flight. As part of its Quesst mission, NASA is building a piloted, experimental aircraft called the X-59 to demonstrate low noise supersonic flight. After initial flight testing to ensure the aircraft performs as designed, NASA will begin a national campaign of supersonic flights over communities to collect data on how people perceive the sounds from this new design. The data collected will support the efforts of national and international noise regulators to develop new standards that would allow supersonic flight over land at low noise levels. This paper provides an update on the planned experimental scope and key goals of the community test campaign.

sonic boom↗
NASA NTRSDate not supplied

Scope and Goals of the NASA Quesst Community Test Campaign With the X-59 Aircraft

In its mission to expand knowledge and improve aviation, NASA conducts research to address sonic boom noise, the prime barrier to overland supersonic flight. For half a century, civilian aircraft have been required to fly slower than the speed of sound when over land to prevent sonic boom disturbances to communities under the flight path. However, lower noise levels may be achieved via new aircraft shaping techniques that reduce the merging of shockwaves generated during supersonic flight. As part of its Quesst mission, NASA is building a piloted, experimental aircraft called the X-59 to demonstrate low noise supersonic flight. After initial flight testing to ensure the aircraft performs as designed, NASA will begin a national campaign of supersonic flights over communities to collect data on how people perceive the sounds from this new design. The data collected will support the efforts of national and international noise regulators to develop new standards that would allow supersonic flight over land at low noise levels. This paper provides an update on the planned experimental scope and key goals of the community test campaign.

sonic boom↗
DOE OSTI2020

Leveraging Bond Financing to Support Energy Efficiency and Renewable Energy Goals: A Resource Summary for State and Local Governments

This resource summary is for state, local, and K-12 energy professionals and non-finance experts seeking to understand how bonds can be used to pay for energy efficiency and renewable energy projects and initiatives. The objective of the resource summary is to inform energy professionals, so they can more confidently and efficiently discuss bond financing with public finance officers and executive leadership as an option for supporting energy goals.

Energy Savings Performance Contracting, Revolving ↗
DOE OSTI2022

Overview of Integrated Pathway Analyses to Meet the Hydrogen Energy Earthshot Goal

This slide deck was presented at the 2021 DOE Hydrogen Shot Summit on Aug. 31, 2021. The presentation describes two ongoing NETL system analysis efforts: "Comparison of Commercial, State-of-the-Art, Fossil-Based Hydrogen Production Technologies" (nearing completion), and "Hydrogen Energy Earthshot Initiative Screening Analysis" (which has recently started). The former study will detail costs and greenhouse gas emissions profiles of current commercial technologies (e.g., reforming and gasification routes). The latter will focus on our efforts to identify pathways that may meet the goal of the DOE Hydrogen Energy Earthshot Initiative (i.e., $1/kg H2 by 2030) as well as low carbon emissions.

Lewis, Eric↗
DOE OSTI2022

Achieving 50% Energy Savings in Chicago Homes: A Case Study for Advancing Equity and Climate Goals

Since 2019, the National Renewable Energy Laboratory (NREL) and Elevate have collaborated to identify pathways to deep energy retrofits in Chicago's housing stock, document equity implications and co-benefits of this transition, and validate the findings by implementing retrofits in real Chicago homes. This document summarizes our analysis process to model advanced retrofit packages that lead to greater than 50% energy savings in Chicago homes. Based on these findings, we have also developed a roadmap with the City to guide implementation, and are deploying the recommended retrofit packages in real Chicago homes to realize these energy savings. This work was developed in collaboration with two key stakeholders - the City of Chicago and Commonwealth Edison (ComEd) - and funded by the U.S. Department of Energy (DOE). NREL's Residential Buildings team maintains the best-in-class ResStock™ energy model of the U.S. residential building stock. For this work, we calibrated ResStock to Chicago's unique local housing stock to accurately simulate energy use in Chicago homes both for current conditions and with various retrofit scenarios. We simulated a wide range of potential building retrofits covering all aspects of residential energy use and then grouped these into packages based on energy and utility bill savings. ResStock can model diverse building types and housing characteristics, so we're able to observe the range of outcomes that might occur when these upgrades are deployed across the entire housing stock. We can then estimate potential energy savings from an advanced retrofit program on Chicago's housing stock by comparing the modeled energy use before versus after a retrofit. This novel version of ResStock, calibrated to Chicago with data from Elevate, can help City officials, ComEd, and other partners plan for community-scale decarbonization via residential retrofits. Specifically, this work contributes the following project goals: Develop a building retrofit prioritization strategy for Chicago single-family and 2- to 4-unit buildings; Identify neighborhoods and home types that have the highest potential for savings from electrification; and Assess the impact of advanced building retrofits on energy use, utility bills, and CO2 emissions at the city and building level. Although this study is specific to Chicago, its methods and learnings are applicable across the United States. These findings are especially notable for heat pumps and electrification retrofits in cold climates.

building energy modeling↗
DOE OSTI2025

A note on the reliability of goal-oriented error estimates for Galerkin finite element methods with nonlinear functionals

Here, we consider estimating the discretization error in a nonlinear functional J (u) in the setting of an abstract variational problem: find u ϵ $\mathscr{V}$ such that B (u, φ) = L (φ) ∀φ ϵ $\mathscr{V}$, as approximated by a Galerkin finite element method. Here, $\mathscr{V}$ is a Hilbert space, B (. , .) is a bilinear form, and L (∙) is a linear functional. We consider well-known error estimates η of the form J (u) - J (u h ) ≈ η = L (z) - B (u h , z), where u h denotes a finite element approximation to u, and z denotes the solution to an auxiliary adjoint variational problem. We show that there exist nonlinear functionals for which error estimates of this form are not reliable, even in the presence of an exact adjoint solution z. An estimate η is said to be reliable if there exists a constant C ϵ $\mathbb{R}$ >0 independent of u h such that |J (u) - J (u h )| ≤ C|η|. We present several example pairs of bilinear forms and nonlinear functionals where reliability of η is not achieved.

A posteriori↗