Search NASA⌕ Search

SEARCH · Search NASA

Results for “Glass crystallization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Hydroesterification of Polycyclooctene to Access Linear Ethylene Ethyl Acrylate Copolymers as a Step Toward Polyolefin Functionalization

To advance a strategy of polymer-to-polymer upcycling of waste polyolefin by dehydrogenation then functionalization, we report successful hydroesterification of polycyclooctene (PCOE), an analogue for partially unsaturated polyethylene. Here, we convert PCOE to a linear analog for poly(ethylene-co-ethyl acrylate) (EEA) across a range of ethyl acrylate incorporations (0 to 18 mol % of ethylene units). The ester incorporation was well controlled by reaction time, and the remaining C=C bonds were subsequently hydrogenated. Here, the bulky ethyl acrylate groups did not incorporate into orthorhombic PE crystals, decreasing the crystallinity, crystallite size, and melting temperature with increasing functionalization. Additionally, hydroesterification tuned the dynamic mechanical properties, decreasing both the glass transition temperature and the storage modulus in the rubbery regime with greater functionalization. The linear EEA analogs reported here achieve remarkable extensibility (strain > 4000%) and high toughness, comparable to commercial random and branched EEA. Ultimately, we demonstrate successful conversion of an analogue to dehydrogenated PE to a linear EEA with favorable mechanical properties.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Structural transitions of 4:1 methanol–ethanol mixture and silicone oil under high pressure

A 4:1 (volume ratio) methanol–ethanol (ME) mixture and silicone oil are two of the most widely used liquid pressure-transmitting media (PTM) in high-pressure studies. Their hydrostatic limits have been extensively studied using various methods; however, the evolution of the atomic structures associated with their emerging nonhydrostaticity remains unclear. Here, we monitor their structures as functions of pressure up to ∼30 GPa at room temperature using in situ high-pressure synchrotron x-ray diffraction (XRD), optical micro-Raman spectroscopy, and ruby fluorescence spectroscopy in a diamond anvil cell. No crystallization is observed for either PTM. The pressure dependence of the principal diffraction peak position and width indicates the existence of a glass transition in the 4:1 ME mixture at ∼12 GPa and in the silicone oil at ∼3 GPa, beyond which a pressure gradient emerges and grows quickly with pressure. There may be another liquid-to-liquid transition in the 4:1 ME mixture at ∼5 GPa and two more glass-to-glass transitions in the silicone oil at ∼10 GPa and ∼16 GPa. By contrast, Raman signals only show peak weakening and broadening for typical structural disordering, and Raman spectroscopy seems to be less sensitive than XRD in catching these structural transitions related to hydrostaticity variations in both PTM. These results uncover rich pressure-induced transitions in the two PTM and clarify their effects on hydrostaticity with direct structural evidence. The high-pressure XRD and Raman data on the two PTM obtained in this work could also be helpful in distinguishing between signals from samples and those from PTM in future high-pressure experiments.

Chen, Xiehang (ORCID:0000000168541506)↗
DOE OSTI2021

Bulk photovoltaic effect in hexagonal LuMnO 3 single crystals

Hexagonal manganites, such as h-LuMnO 3 , are ferroelectric and have a narrow electronic band gap of ≈1.5eV. Here we report on the photoresponse of h-LuMnO 3 single crystals. It is found that the short circuit photocurrent density (J sc ) and the open circuit voltage (V oc ) are dependent on the direction of the polarization plane of a linearly polarized impinging light. Its angular dependence indicates the contribution of bulk photovoltaic effect to the short circuit photocurrent (J BPE ). It is also observed that a switchable drift photocurrent, originating from the depoling field of the ferroelectric and thus tunable(<10%) by its polarization direction, also contributes to J sc . Although its presence precludes accurate determination of the bulk photovoltaic tensor elements and Glass coefficients, some bounds can be established. The Glass coefficients are found to be significantly larger than those obtained in BiFeO 3 . We argue that the smaller band gap of h-LuMnO 3 , its distinctive bipyramidal crystal field, and electronic configuration (3d 4 vs 3d 5 ), account for the difference and suggest a path towards ferroelectrics of higher photoconversion efficiency.

14 SOLAR ENERGY↗
DOE OSTI2023

Metallization and spin fluctuations in Cu-doped lead apatite

An electronic structure and magnetic properties analysis of the recently proposed Cu-doped lead apatite is performed. Here, we show that electronic structures of differently Cu-substituted structures are characterized by localized molecular Cu-O bands at or near the Fermi level. The Cu substitutions can happen at both Pb1 and Pb2 sites, leading to metallic and semiconducting systems differently. The electronic systems in these bands are highly unstable magnetically and form clusters of rigidly ferromagnetically coupled magnetic moments on Cu and neighboring oxygen atoms with a total moment of about 1µ B . The ground state of uniformly Cu-doped lead apatite appears to be magnetic and semiconducting. The nonuniform distribution of two Cu atoms at the nearest Pb2 sites leads to an antiferromagnetic semiconducting state with formation energy close to uniformly distributed Cu configurations. The inclusion of quantum spin fluctuations confirms the stability of magnetic Cu-O clusters. Our calculations revealed the absence of the long-range magnetic order between uniformly distributed Cu-O clusters, creating the spin glass type of system.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Vacuum deposition of χ(2) nonlinear organic single crystal films on silicon

Integrating second order nonlinear (χ(2)) optical materials on chip is an ongoing challenge for Si photonics. Noncentrosymmetric molecular crystals have the potential to deliver high χ(2) nonlinearity with good thermal stability, but so far have been limited to growth from solution or the melt, which are both difficult to control and scale up in manufacturing. Here, we show that large (>100 μm) single crystal domains of the nonlinear molecule 2-[3-(4-hydroxystyryl)-5,5-dimethylcyclohex-2-enylidene] malononitrile (OH1) can be grown monolithically on either glass or Si via vacuum evaporation, followed by a short thermal annealing step. The crystallites are tens of nanometer thick and exhibit strong second harmonic generation with their primary χ(2) tensor component lying predominantly in plane. Remarkably, we find that a single domain can grow uninterrupted through nearby channels etched on a Si wafer, which may provide a path to integrate OH1 on Si or Si3N4 waveguides for a broad range of χ(2)-based photonic integrated circuit functionality.

Physics↗
DOE OSTI2021

Empty perovskites as Coulomb floppy networks: Entropic elasticity and negative thermal expansion

Floppy networks (FNs) provide valuable insight into the origin of anomalous mechanical and thermal properties in soft matter systems, from polymers, rubber, and biomolecules to glasses and granular materials. Here, we use the same FN concept to construct a quantitative microscopic theory of empty perovskites, a family of crystals with ReO 3 structure, which exhibit a number of unusual properties. One remarkable example is ScF 3 , which shows a near-zero-temperature structural instability and large negative thermal expansion (NTE). Furthermore, we trace these effects to an FN-like crystalline architecture formed by strong nearest-neighbor bonds, which is stabilized by net electrostatic repulsion that plays a role similar to osmotic pressure in polymeric gels. NTE in these crystalline solids, which we conceptualize as Coulomb floppy networks, emerges from the tension effect of Coulomb repulsion combined with the FN's entropic elasticity and has the same physical origin as in gels and rubber. Our theory provides an accurate, quantitative description of phonons, thermal expansion, compressibility, and structural phase diagram, all in excellent agreement with experiments. The entropic stabilization of critical soft modes, which play only a secondary role in NTE, explains the observed phase diagram. Significant entropic elasticity resolves the puzzle of a marked, ≈50% discrepancy between the experimentally observed bulk modulus and ab initio calculations. The Coulomb FN approach is potentially applicable to other important materials with markedly covalent bonds, from perovskite oxides to iron chalcogenides, whose anomalous vibrational and structural properties are still poorly understood.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Spin-glass dynamics in the presence of a magnetic field: exploration of microscopic properties

The synergy between experiment, theory, and simulations enables a microscopic analysis of spin-glass dynamics in a magnetic field in the vicinity of and below the spin-glass transition temperature T g . The spin-glass correlation length, ξ(t, t w ; T), is analysed both in experiments and in simulations in terms of the waiting time t w after the spin glass has been cooled down to a stabilised measuring temperature T < T g and of the time t after the magnetic field is changed. This correlation length is extracted experimentally for a CuMn 6 at. % single crystal, as well as for simulations on the Janus II special-purpose supercomputer, the latter with time and length scales comparable to experiment. The non-linear magnetic susceptibility is reported from experiment and simulations, using ξ(t, t w ; T) as the scaling variable. Previous experiments are reanalysed, and disagreements about the nature of the Zeeman energy are resolved. The growth of the spin-glass magnetisation in zero-field magnetisation experiments, M ZFC (t, t w ; T), is measured from simulations, verifying the scaling relationships in the dynamical or non-equilibrium regime. Lastly, our preliminary search for the de Almeida–Thouless line in D = 3 is discussed.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Hopping crossover and high-temperature superspin glass behavior in Ni films deposited on MoS 2

Realizing the potential of MoS 2 and other two-dimensional semiconductors in spintronic devices requires a fundamental understanding of their interaction with ferromagnetic metals. We have investigated the transport and magnetic properties of thin Ni films grown on single-crystal MoS 2 substrates. The Ni is found to have a granular morphology with an average grain size of approximately 2 nm. Like previously investigated granular Ni/insulator composites below the percolation threshold, transport is found to proceed via hopping. However, our Ni/MoS 2 sample exhibits a dual crossover: activated hopping to 𝑇−1/2 variable-range hopping at a higher temperature and then a transition to power-law behavior at a lower temperature. The magnetoresistance was used as a novel probe for uncovering superspin-glass-like behavior above room temperature in the Ni/MoS 2 nanostructure, which also exhibits a collective ferromagnetic state at very low temperatures, reminiscent of superferromagnetism.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Effect of annealing on the tribological behavior of Zr-based bulk metallic glass

Bulk Metallic Glasses (BMGs) are promising materials for several applications owing to their high elastic limit and resistance to permanent deformation. However, BMGs have lower wear resistance than their crystalline counterparts during dry sliding. The formation of a composite material with crystalline phases dispersed in the BMG matrix through devitrification and partial crystallization at elevated temperatures has recently been proposed as an effective way to improve the wear resistance. However, our understanding of the origin of the improved wear behavior of annealed BMGs is still elusive. Here, a systematic evaluation of the effect of annealing temperature (from temperatures lower than the BMG glass transition temperature to temperatures higher than the BMG recrystallization temperature) on the friction and wear response of a Zr-based BMG, namely Vit105 (Zr 52.5 Cu 17.9 Ni 14.6 Al 10 Ti 5 ), was performed. The results indicate that annealing Vit105 improves its wear resistance while also reducing the steady-state friction response when the annealing temperature is close to the glass transition temperature. Notably, the formation of a transfer film on the sapphire countersurface is highly dependent on the applied normal load and sliding time. Finally, the wear mechanism was found to be strongly dependent on the annealing temperature as a transition from a predominantly adhesive wear mechanism to an abrasive-dominated one was observed as the annealing temperature crossed the glass transition temperature. Altogether, the results of this work aid to our understanding of the tribological behavior of Zr-based BMGs in general, while also providing clues to strategies for the effective use of BMGs in tribological applications.

Lien, Hsu-Ming [Univ. of Texas, Austin, TX (United↗
DOE OSTI2020

Changes in short- and medium-range order in metallic liquids during undercooling

It has been widely speculated that dominant motifs, such as short-range icosahedral order, can influence glass formation and the properties of glasses. Experimental data on both fragile and strong undercooled liquids demonstrate corresponding changes in their thermophysical properties consistent with increasing development of a network of interconnect motifs based on molecular dynamics. Describing these regions of local order, how they connect, and how they are related to property changes have been challenging issues, both computationally and experimentally. Yet the consensus is that metallic liquids develop interconnected medium-range order consisting of some regions with lower mobility with deeper undercooling. Less well understood is how these motifs (or “crystal genes”) in the liquid can inhibit nucleation in the deeply undercooled liquid or influence phase selection upon devitrification. These motifs tend to have local packing unlike stable compounds with icosahedral order tending to dominate the best glass formers. The underlying kinetic and thermodynamic forces that guide the formation of these motifs and how they interconnect during undercooling remain open questions.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Determining the three-dimensional atomic structure of an amorphous solid

Amorphous solids such as glass, plastics and amorphous thin films are ubiquitous in our daily life and have broad applications ranging from telecommunications to electronics and solar cells 1-4 . However, owing to the lack of long-range order, the three-dimensional (3D) atomic structure of amorphous solids has so far eluded direct experimental determination 5-15 . Here we develop an atomic electron tomography reconstruction method to experimentally determine the 3D atomic positions of an amorphous solid. Using a multi-component glass-forming alloy as proof of principle, we quantitatively characterize the short- and medium-range order of the 3D atomic arrangement. We observe that, although the 3D atomic packing of the short-range order is geometrically disordered, some short-range-order structures connect with each other to form crystal-like superclusters and give rise to medium-range order. We identify four types of crystal-like medium-range order-face-centred cubic, hexagonal close-packed, body-centred cubic and simple cubic-coexisting in the amorphous sample, showing translational but not orientational order. These observations provide direct experimental evidence to support the general framework of the efficient cluster packing model for metallic glasses 10,12-14,16 . Finally, we expect that this work will pave the way for the determination of the 3D structure of a wide range of amorphous solids, which could transform our fundamental understanding of non-crystalline materials and related phenomena.

74 ATOMIC AND MOLECULAR PHYSICS↗
DOE OSTI2026

Thermoelectric Behavior of Structurally Disordered Lanthanide and Actinide Silicides

Lanthanide and actinide intermetallic materials exhibit intriguing electronic, structural, and magnetic properties arising from their partially filled f orbitals. Strong f-electron correlations can significantly modify the electronic density of states, carrier scattering, and transport behavior, making these systems promising candidates for unconventional thermoelectric materials. In previous studies, single crystals of A1.33T4Al8Si2 (A = Ce, Th, U, Np; T = Co, Ni) were synthesized. This structure consists of ordered TAl2 corrugated double layers separated by disordered An–Si monolayers. The inherent disorder within the An–Si layers has been linked to unusual magnetic behavior, such as spin-glass phenomena, and is expected to strongly influence phonon scattering and charge-carrier transport relevant to thermoelectric performance. However, the thermoelectric properties of this material family have not previously been explored. In this work, DFT calculations were performed to evaluate the electronic density of states, band structures, and thermoelectric properties, including the effects of doping. To validate these predictions, Ce1.33Co4Al8Si2 single crystals were grown and experimentally characterized. Additionally, a new Yb1.33Co4Al8Si2 phase was synthesized and characterized using single-crystal XRD, SEM-EDS, magnetization measurements, and thermoelectric measurements. These results provide insight into structure–property relationships governing thermoelectric behavior in f-electron intermetallics and offer guidance for future thermoelectric materials.

37 - INORGANIC, ORGANIC, PHYSICAL AND ANALYTICAL C↗
DOE OSTI2025

Gas Hydrate Film Growth in Microfluidic Channels for Carbon Dioxide Capture and Sequestration Applications

Gas or clathrate hydrates are a solid, crystalline compound composed of water and guest molecules that typically form at high pressure and low temperature conditions. Carbon dioxide (CO2) hydrates may be involved in several carbon dioxide capture and sequestration (CCS) applications, including CO2 pipeline transportation and CO2 offshore sequestration. Within these applications, the formation mechanism and kinetics must be well understood to manage the CCS processes, either by preventing or promoting hydrate formation. In this work, a high-pressure glass microfluidic reactor is used in tandem with visual microscopy and in-situ Raman spectroscopy to study both the morphological and kinetic behavior of gas hydrate crystals. Subcooling, pressure, and CO2 flow rate are investigated for their impact on the thickening behavior of pure CO2 hydrates, with flow rate being the only parameter to have a significant effect. Visual and Raman spectroscopy evidence show that both a dense hydrate layer and a porous hydrate layer form, and the latter may provide a path for mass transfer to continue hydrate crystallization. A first principles mass transfer model is developed to describe CO2 hydrate crystal thickening at the interface between gas and water. The impacts of gas impurities and channel wettability are also studied. This method is further applied to investigate the conversion of methane hydrate to CO2 hydrate for combined energy recovery and methane hydrate formation. The authors acknowledge the US Department of Energy Basic Energy Science award # DE-SC0022162.

Wadsworth, Lindsey [Colorado School of Mines, Gold↗
DOE OSTI2020

Relation Between the Defect Interactions and the Serration Dynamics in a Zr-Based Bulk Metallic Glass

For this study, the effects of thermal annealing and compressive strain rate on the complexity of the serration behavior in a Zr-based bulk metallic glass (BMG) was investigated. Here, as-cast and thermally-annealed (300 °C, 1 week) Zr 52.5 Cu 17.9 Ni 14.6 Al 10 Ti 5 BMG underwent room-temperature compression tests in the unconstrained condition at strain rates of 2 × 10 -5 s -1 and 2 × 10 -4 s -1 . The complexity of the serrated flow was determined, using the refined composite multiscale entropy technique. Nanoindentation testing and X-ray diffraction characterization were performed to assess the changes in the microstructure and mechanical properties of the BMG that occurred during annealing. The results indicated that the BMG did not crystallize during annealing in the prescribed heating condition. Nanoindentation tests revealed that annealing led to a significant increase in the depth-dependent nanoindentation hardness and Young’s modulus, which were attributed to the structural relaxation in the glass. Furthermore, both annealing and an increased strain rate resulted in a marked enhancement in the complexity of the serrated flow during compression. It was concluded that the increase in the sample entropy with increasing strain rate is related to an increase in the number of defect interactions during the serrated flow.

36 MATERIALS SCIENCE↗
DOE OSTI2021

First-principles study of an S = 1 quasi one-dimensional quantum molecular magnetic material

We use density functional theory to study the structural, magnetic, and electronic structures of the organometallic quantum magnet NiCl 2-4 SC (NH 2 ) 2 (DTN). Recent work has demonstrated the quasi one-dimensional nature of the molecular crystal and studied its quantum phase transitions at low temperatures. The system includes a magnetoelectric (ME) coupling and, when doped with Br, the presence of an exotic Bose-glass state. Using the generalized gradient approximation with inclusion of a van der Waals term to account for weak intermolecular forces and by introducing a Hubbard U term to the total energy, we systematically show that our calculations reproduce the magnetic anisotropy, the intermolecular exchange coupling strength, and the magnetoelectric effect in DTN, which have been observed in previous experiments. Further analysis of the electronic structure gives insight into the underlying magnetic interactions, including what mechanisms may be causing the ME effect. Using this computationally efficient model, we predict what effect applying an electric field might have on the magnetic properties of this quantum magnet.

1-dimensional spin chains↗
DOE OSTI2023

No detectable redox exchange between sulfur and iron during rapid cooling of basalts

The valence states of iron and sulfur in mantle-derived melts influence and respond to the composition of the mantle as well as the subsequent evolution of those melts in Earth's crust. Characterizing the valence states of iron and sulfur in silicate melts that have quenched to form glasses is therefore critical to understanding the composition of the mantle and the magmatic processes that take place before and during volcanic eruptions. Glasses quenched from silicate melts offer the opportunity to precisely measure sulfur and iron valence states, but whether the transition from melt to glass affects the valence state of sulfur and iron is uncertain. Here, we use the glassy margins of two pillow basalts, one from a mid-ocean ridge and one from a back-arc basin, as a natural experiment to test the effect of quench rate on sulfur and iron valence states. We report micro-X-ray Absorption Near Edge Structure (XANES) measurements of S 6+ /ΣS (S 6+ /[S 6+ +S 2- ]) and Fe 3+ /ΣFe (Fe 3+ /[Fe 2+ +Fe 3+ ]) along transects from the rapidly quenched rims of the pillows down into the slowly cooled crystal-rich interiors. The range of average quench rates estimated for our selected analysis areas range from 1.2 x 10 5 °C/sec at the pillow margin to 1.1 °C/sec in the interior and span quench rates experienced by natural and experimental glasses. On average, S6+/ΣS = 0.09 ± 0.01 and Fe 3+ /ΣFe = 0.147 ± 0.002 in the mid-ocean ridge sample and S 6+ /ΣS = 0.21 ± 0.01and Fe 3+ /ΣFe = 0.153 ± 0.004 in the back-arc sample, where the quoted uncertainty is the 1σ standard deviation of n= 9-16 analyses. We find that the S 6+ /ΣS and Fe 3+ /ΣFe values along transects in each sample show no systematic changes with depth, and by proxy, no systematic changes with quench rate. In each pillow, all measured S 6+ /ΣS and Fe 3+ /ΣFe ratios are within the absolute uncertainty of each technique. We propose that these observations are consistent with either sluggish reaction kinetics between sulfur and iron, or an insignificant temperature effect on sulfur-iron redox exchange equilibria. These observations demonstrate that sulfur and iron valence states in glasses with varying quench rates can be directly compared, and that changes in sulfur and iron valence during quench are below the limits of detection with XANES.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Low-Voltage Haze Tuning with Cellulose-Network Liquid Crystal Gels

Being key components of the building envelope, glazing products with tunable optical properties are in great demand because of their potential for boosting energy efficiency and privacy features while enabling the main function of allowing natural light indoors. However, windows and skylights with electric switching of haze and transparency are rare and often require high voltages or electric currents, as well as not fully meet the stringent technical requirements for glazing applications. Here, by introducing a predesigned gel material we describe an approach dubbed “Haze-Switch” that involves low-voltage tuning of the haze coefficient in a broad range of 2–90% while maintaining high visible-range optical transmittance. The approach is based on a nanocellulose fiber gel network infiltrated by a nematic liquid crystal, which can be switched between polydomain and monodomain spatial patterns of optical axis via a dielectric coupling between the nematic domains and the applied external electric field. By utilizing a nanocellulose network of nanofibers ~10 nm in diameter we achieve <10 V dielectric switching and <2% haze in the clear state, as needed for applications in window products. Finally, we characterize physical properties relevant to window and smart glass technologies, like the color rendering index, haze coefficient, and switching times, demonstrating that our material and envisaged products can meet the stringent requirements of the glass industry, including applications such as privacy windows, skylights, sunroofs, and daylighting.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗