Search NASA⌕ Search

SEARCH · Search NASA

Results for “Implementation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14

Evaluation of a Regional Crop Model Implementation for Sub-National Yield Assessments in Kenya

CONTEXT: Cropping system models can be used to both assess regional food security and to monitor and predict agricultural drought. Agriculture in Kenya is extremely important to both the economy and food security of the country. OBJECTIVE: This study evaluated a regional implementation of a widely used crop model, the Decision Support System for Agrotechnology Transfer (DSSAT), within a coupled modeling framework, the Regional Hydrologic Extremes Assessment System (RHEAS), over Kenya. The goal of this study was to assess the ability of RHEAS to simulate the annual variability of maize yields at the county level and evaluate the uncertainty inherent in the model and inputs. METHODS: The RHEAS system implements a stochastic ensemble approach to account for field scale variabilities in crop management practices and underlying soil and weather conditions. Satellite-derived datasets were used to evaluate the land surface component of the system and seasonally disaggregated yield for 5 years was used to assess the performance of the cropping system model. RESULTS AND CONCLUSIONS: The median correlation between RHEAS and satellite-derived soil moisture and evapotranspiration estimates were 0.78, and 0.51, respectively, indicating that the model is able to capture the key drivers of the hydrological budget. Overall, RHEAS simulated yearly yield variations with a median correlation of 0.7 with reported yields, with the best performance in the short rains season. However, across both seasons, the RHEAS model was positively biased on the order of ~1.6 MT/ha. The overall median unbiased RMSE was 0.66 MT/ha. The RHEAS system shows skill at simulating extreme departures in anomalies, and a majority of the time (62.5%) the reported yields fall within the interquartile range of the simulations. SIGNIFICANCE: One of the most important areas of improvement for the next generation of agricultural data and models is to better understand and communicate the inherent uncertainties. This is especially critical in data-limited regions. Here we present a modeling system and its implementation that begins to address these concerns. We demonstrate the ability to simulate broad trends in yields at the county level for sub-annual yields with skills that commensurate previous national/annual level studies.

Crop model↗

Implementation of Interactive Sea Ice Radiative Transfer into the GISS GCM and Its Impact on Sea Ice Simulation

To improve the representation of solar radiation in sea ice in the Goddard Institute for Space Studies (GISS) climate model (ModelE), we have implemented an advanced radiative transfer (RT) scheme to interactively calculate the surface albedo and transmittance of the ice layer and the solar absorption within. The ice physical properties (temperature, salinity, and density), which are simulated by the thermodynamic module in ModelE, are directly used as the input of the RT scheme to determine the inherent optical properties (IOPs) of brine pockets and air bubbles in the ice layers. This provides a more sophisticated, accurate, and complete treatment of sea ice RT for ModelE. The sea ice RT model is also validated with measured spectral albedo and transmittance for different ice types. Compared with ModelE simulations with current radiative parameterization for sea ice, the new RT implementation will slightly increase the ice surface albedo in the summer in the Arctic and greatly increase the radiative transmittance. Consequently, the ice surface melting is reduced and the base melting is increased but the difference in the simulated ice area is small. The effect of this new RT implementation on the Antarctic ice is negligible. The observed decrease in Arctic sea ice extent is well captured by the ModelE simulation.

Sea ice↗

Field-Programmable Gate Array Implementation of a Single Photon-Counting Receive Modem

We present a field-programmable gate array (FPGA) implementation of a single photon-counting receive modem for a pulse position modulated signal. The modem is compliant with the Consultative Committee for Space Data Systems (CCSDS) High Photon Efficiency (HPE) Optical Communications Coding and Synchronization standard and is capable of a maximum data rate of 267 Mbps. The system is designed on a commercial off-the-shelf FPGA platform and utilizes superconducting nanowire single photon counting detectors, analog to digital converters (ADC s) to sample the detectors, and two FPGAs. Symbol timing recovery, photon counting, convolutional deinterleaving, and codeword synchronization areis performed in the first FPGA. The second FPGA performs iterative decoding on each codeword of the serially concatenated pulse position modulated (SCPPM) signal. A digital filter is included to compensate for timing jitter of the detector, and the decoder throughput can be modified adjusted through reconfigurable parallelization. The decoder also implements a resource-efficient, algorithmic polynomial interleaver and deinterleaver. Both FPGAs can be reconfigured to switch between pulse position modulation (PPM)-16 and PPM-32 with code rates 1/3, 1/2, and 2/3. In this paper, we describe the receiver architecture and FPGA implementation of the timing recovery loop and SCPPM decoder, FPGA utilization for the different modes, and receive modem characterization test results.

Field-programmable Gate Array↗

2022 Through April 2023 Corrective Measures Implementation and Interim Measures Annual Status Report: Summary of Biosparge System Operation and Maintenance, Interim Measures and Monitoring Mobile Launch Platform Rehabilitation Sites / Vehicle Assembly Building Area (Swmu 056) Kennedy Space Center, Florida

This report presents a summary of the Corrective Measures Implementation (CMI) and Interim Measure (IM) implementation activities that occurred from January 2022 through April 2023 at the Mobile Launch Platform Rehabilitation Sites (MLP)/Vehicle Assembly Building (VAB) Area, Solid Waste Management Unit 056 (SWMU 056), located at the John F. Kennedy Space Center, Florida. The following summaries briefly describe areas within SWMU 056 identified by historical site investigation activities where groundwater monitoring and remedial actions have been implemented to date.

VOCs↗

Managing Current Earth Observation Needs through User-Driven Implementation of Upcoming Satellite Needs Working Group (SNWG) Solutions

Since 2016, the Satellite Needs Working Group (SNWG), an initiative of the U.S. Group on Earth Observations (USGEO), has surveyed federal agencies every two years to identify their satellite earth observation needs. For each expressed need, NASA-led assessment teams coordinate with responding agencies to devise remote sensing solutions that benefit multiple partners and span across a number of thematic areas including, but not limited to, Atmospheric Composition, Carbon Cycle and Ecosystems, Earth Surface and Interior, and Oceans and Cryosphere. Solutions can comprise existing or modified data products as well as the construction of new data products and technologies: since 2016, a multitude of SNWG activities have been theorized and developed, reaching a wide range of users in the science community. Due to an increase in survey responses in 2020 and to assure solution delivery to users within five years of budget appropriations, the SNWG Management Office was established to oversee the assessment of agency needs and the implementation and operations of solution development. The SNWG MO’s unique implementation strategy creates multiple touchpoints with agencies during solution development helping fulfill Earth Science to Action priorities (the 2024 NASA Earth Science Division strategic plan) and ensuring solutions are accessible, usable, and support decision-making for their intended audience. This presentation will outline the ways in which SNWG supports complementary goals of the Decadal Survey, with specific attention on the SNWG MO’s renewed user-centric implementation strategy for upcoming SNWG solutions.

Jenny Wood↗

Interim Land Use Control Implementation Plan

This Interim Land Use Control Implementation Plan (LUCIP) has been prepared to inform current and potential future users of the Kennedy Space Center (KSC) Contractors Road Heavy Equipment (CRHE) Area (SWMU 055; "the Site") of institutional controls that have been implemented at the Site1. Although there are no current unacceptable risks to human health or the environment associated with the CRHE Area, an interim institutional land use control (LUC) is necessary to prevent human health exposure to volatile organic compound (VOC)-affected groundwater at the Site. Controls will include periodic inspection, condition certification, and agency notification.

Implementation↗

Contact Multigraph Routing: Overview and Implementation

In Delay Tolerant Networking (DTN), the standard routing algorithm used to navigate time-varying networks has been Contact Graph Routing (CGR). In CGR, a globally distributed list of contacts, periods during which two DTN nodes may communicate, is used to construct a contact graph, in which contacts are vertices. A version of Dijkstra’s algorithm can then be used to find paths through this model of the timevarying network. However, since contact graphs may be large compared to the network, potentially growing with the square of the number of network nodes and linearly with the time interval represented, the resulting algorithm does not scale well with the size of the network or time. Any improvement to the routing algorithm will bring significant returns to scale. In a previous paper, we briefly introduced an alternative to the contact graph model for routing. This alternative model is based on a multigraph (a graph in which there may be multiple edges between a pair of vertices) where vertices represent network nodes instead of contacts. A version of Dijkstra’s algorithm in these multigraph models reduces the time needed to perform the same routing computations done in the existing CGR algorithm. Moreover, a modified version of Yen’s algorithm for multigraphs is included. Our variation of CGR, which we call Contact Multigraph Routing (CMR), provides an in-line replacement for the previously used pathfinding algorithms. This paper describes an implementation created based on the CMR approach, and experimental comparisons to traditional CGR are given. In addition, we explore some additional modifications to the routing pipeline traditionally assumed in CGR. These modifications range from the theoretical to the practical in terms of size and scope. We step forward our understanding of sheaftheoretic networking and describe how to model the routing pipeline using sheaves. We detail some enhanced route selection criteria that addresses some of the added complexity of DTNbased systems. We also include a future works section on future improvements and implementations that would be of service to the broader DTN community.

contact graph routing↗

Safety margins in the implementation of planetary quarantine requirements

The formulation of planetary quarantine requirements, and their implementation as determined by a risk allocation model, is discussed. The model defines control safety margins with particular emphasis on utility in achieving the desired minimization of excessive margins, and their effect on implementation procedures.

Schalkowsky, S.↗

Digital receiver study and implementation

Computer software was developed which makes it possible to use any general purpose computer with A/D conversion capability as a PSK receiver for low data rate telemetry processing. Carrier tracking, bit synchronization, and matched filter detection are all performed digitally. To aid in the implementation of optimum computer processors, a study of general digital processing techniques was performed which emphasized various techniques for digitizing general analog systems. In particular, the phase-locked loop was extensively analyzed as a typical non-linear communication element. Bayesian estimation techniques for PSK demodulation were studied. A hardware implementation of the digital Costas loop was developed.

Fogle, D. A.↗

Study of V/STOL aircraft implementation. Volume 1: Summary

A high density short haul air market which by 1980 is large enough to support the introduction of an independent short haul air transportation system is discussed. This system will complement the existing air transportation system and will provide relief of noise and congestion problems at conventional airports. The study has found that new aircraft, exploiting V/STOL and quiet engine technology, can be available for implementing these new services, and they can operate from existing reliever and general aviation airports. The study has also found that the major funding requirements for implementing new short haul services could be borne by private capital, and that the government funding requirement would be minimal and/or recovered through the airline ticket tax. In addition, a suitable new short haul aircraft would have a market potential for $3.5 billion in foreign sales. The long lead times needed for aircraft and engine technology development will require timely actions by federal agencies.

Portenier, W. J.↗

Implementation and evaluation of ILLIAC 4 algorithms for multispectral image processing

Data concerning a multidisciplinary and multi-organizational effort to implement multispectral data analysis algorithms on a revolutionary computer, the Illiac 4, are reported. The effectiveness and efficiency of implementing the digital multispectral data analysis techniques for producing useful land use classifications from satellite collected data were demonstrated.

Swain, P. H.↗

Social cost considerations and legal constraints in implementing modular integrated utility systems

Social costs associated with the design, demonstration, and implementation of the Modular Integrated Utility System are considered including the social climate of communities, leadership patterns, conflicts and cleavages, specific developmental values, MIUS utility goal assessment, and the suitability of certian alternative options for use in a program of implementation. General considerations are discussed in the field of socio-technological planning. These include guidelines for understanding the conflict and diversity; some relevant goal choices and ideas useful to planners of the MIUS facility.

Lede, N. W.↗

Implementation of hydrologic models at Goddard Space Flight Center

Major watershed simulation models were implemented on the computer system at NASA Goddard Space Flight Center, and their operation was verified. Historical and physiographic data were acquired for two Maryland river basins (Monocasy River above Jug Bridge and Patuxent River near Laurel, Maryland) and the models were calibrated to simulate them. GSFC personnel were instructed in model operation after the models were implemented.

Source record↗

Viking planetary quarantine procedures and implementation

Some of the techniques and methodology that were used on Viking to implement planetary quarantine requirements are reported. Special attention was given to techniques and approaches used to implement sterilization of the Viking probe. Quarantine procedures for unmanned planetary missions and procedures for microbiological contamination of space hardware are included. A probability of contamination of the biological instruments onboard by terrestrial organisms was examined.

Howell, R.↗

MIRADS-2 Implementation Manual

The Marshall Information Retrieval and Display System (MIRADS) which is a data base management system designed to provide the user with a set of generalized file capabilities is presented. The system provides a wide variety of ways to process the contents of the data base and includes capabilities to search, sort, compute, update, and display the data. The process of creating, defining, and loading a data base is generally called the loading process. The steps in the loading process which includes (1) structuring, (2) creating, (3) defining, (4) and implementing the data base for use by MIRADS are defined. The execution of several computer programs is required to successfully complete all steps of the loading process. This library must be established as a cataloged mass storage file as the first step in MIRADS implementation. The procedure for establishing the MIRADS Library is given. The system is currently operational for the UNIVAC 1108 computer system utilizing the Executive Operating System. All procedures relate to the use of MIRADS on the U-1108 computer.

Source record↗

Implementing technology assessments

Five case studies of specific technology assessments and the ways in which they influenced (or did not influence) the development of the assessed technology are discussed. Automotive air pollution and problems of implementing technology assessment are considered. The assessment-acceptance-implementation process is discussed in detail using the five case studies as examples.

Kasper, R. G.↗

Spacelab user implementation assessment study (software requirements analysis). Volume 1: Executive study

The primary objective of this study was to develop an integrated approach for the development, implementation, and utilization of all software that is required to efficiently and cost-effectively support advanced technology laboratory flight and ground operations. It was recognized that certain aspects of the operations would be mandatory computerized services; computerization of other aspects would be optional. Thus, the analyses encompassed not only alternate computer utilization and implementations but trade studies of the programmatic effects of non-computerized versus computerized approaches to the operations. A general overview of the study is presented.

Source record↗