Search NASA⌕ Search

SEARCH · Search NASA

Results for “Measured Response”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14

Viking Mars lander 1975 dynamic test model/orbiter developmental test model forced vibration test

The Viking Mars Lander 1975 dynamic test model and orbiter developmental test model were subjected to forced vibration sine tests. Flight acceptance (FA) and type approval (TA) test levels were applied to the spacecraft structure in a longitudinal test configuration using a 133,440-N (30,000-lb) force shaker. Testing in the two lateral axes (X, Y) was performed at lower levels using four 667-N (150-lb) force shakers. Forced vibration qualification (TA) test levels were successfully imposed on the spacecraft at frequencies down to 10 Hz. Measured responses showed the same character as analytical predictions, and correlation was reasonably good. Because of control system test tolerances, orbiter primary structure generally did not reach the design load limits attained in earlier static testing. A post-test examination of critical orbiter structure disclosed no apparent damage to the structure as a result of the test environment.

Fortenberry, J.↗

Exploratory flight investigation of aircraft response to the wing vortex wake generated by the augmentor wing jet STOL research aircraft

A brief exploratory flight program was conducted at Ames Research Center to investigate the vortex wake hazard of a powered-lift STOL aircraft. The study was made by flying an instrumented Cessna 210 aircraft into the wake of the augmentor wing jet STOL research aircraft at separation distances from 1 to 4 n.mi. Characteristics of the wake were evaluated in terms of the magnitude of the upset of the probing aircraft. Results indicated that within 1 n.mi. separation the wake could cause rolling moments in excess of roll control power and yawing moments equivalent to rudder control power of the probe aircraft. Subjective evaluations by the pilots of the Cessna 210 aircraft, supported by response measurements, indicated that the upset caused by the wake of the STOL aircraft was comparable to that of a DC-9 in the landing configuration.

Jacobsen, R. A.↗

A Monte Carlo analysis of the effects of instrumentation errors on aircraft parameter identification

An output error estimation algorithm was used to evaluate the effects of both static and dynamic instrumentation errors on the estimation of aircraft stability and control parameters. A Monte Carlo analysis, using simulated cruise flight data, was performed for a high performance military aircraft, a large commercial transport, and a small general-aviation aircraft. The effects of variations in the information content of the flight data, resulting from two different choices of control input maneuvers, were also determined. The results indicate that unmodeled instrumentation errors can cause inaccuracies in the estimated parameters which are comparable to their nominal values. Control input errors and angular accelerometer lags were found to be most significant of the instrumentation errors evaluated, and the perturbations they produce are much larger than those arising from the combined effects of static errors and white noise in the output response measurements.

Bryant, W. H.↗

Direct solar energy conversion for large scale terrestrial use

Various techniques to increase the open circuit voltage are being explored. It had been previously observed that cells made on CdS deposited from a single source gave a consistently higher V sub oc. Further tests have now shown that this effect may in fact relate to differences in source and substrate temperatures. The resulting differences in CdS structure and crystallinity are being documented. Deposits of mixed CdS and ZnS are being produced and will be initially made into cells using the conventional barriering technique. Analysis of I-V characteristics at temperatures between 25 and 110 C is being perfected to provide nondestructive analysis of the Cu2S. Changes due to vacuum heat treatments and exposure to oxygen are also being monitored by the same technique. Detailed spectral response measurements are being made.

Boeer, K. W.↗

Calibration of a universal indicated turbulence system

Theoretical and experimental work on a Universal Indicated Turbulence Meter is described. A mathematical transfer function from turbulence input to output indication was developed. A random ergodic process and a Gaussian turbulence distribution were assumed. A calibration technique based on this transfer function was developed. The computer contains a variable gain amplifier to make the system output independent of average velocity. The range over which this independence holds was determined. An optimum dynamic response was obtained for the tubulation between the system pitot tube and pressure transducer by making dynamic response measurements for orifices of various lengths and diameters at the source end.

Chapin, W. G.↗

Model verification of large structural systems

A methodology was formulated, and a general computer code implemented for processing sinusoidal vibration test data to simultaneously make adjustments to a prior mathematical model of a large structural system, and resolve measured response data to obtain a set of orthogonal modes representative of the test model. The derivation of estimator equations is shown along with example problems. A method for improving the prior analytic model is included.

Lee, L. T.↗

A laser based characterization facility for silicon photocell studies

A computer controlled laser based characterization facility used for detailed studies of silicon photodetectors and spectral response measurement on silicon solar cell is described. The power in the laser beam is measured with respect to electrical standards using an electrically calibrated pyroelectric radiometer.

Geist, J.↗

Space shuttle pogo studies

Topics covered include: (1) pogo suppression for main propulsion subsystem operation; (2) application of quarter-scale low pressure oxidizer turbopump transfer functions; (3) pogo stability during orbital maneuvering subsystem operation; and (4) errors in frequency response measurements.

Coppolino, R. N.↗

Dip-coating process: Silicon sheet growth development for the large-area silicon sheet task of the low-cost silicon solar array project

The objective of this research program is to investigate the technical and economic feasibility of producing solar-cell-quality sheet silicon by coating one surface of carbonized ceramic substrates with a thin layer of large-grain polycrystalline silicon from the melt. The past quarter demonstrated significant progress in several areas. Seeded growth of silicon-on-ceramic (SOC) with an EFG ribbon seed was demonstrated. Different types of mullite were successfully coated with silicon. A new method of deriving minority carrier diffusion length, L sub n from spectral response measurements was evaluated. ECOMOD cost projections were found to be in good agreement with the interim SAMIS method proposed by JPL. On the less positive side, there was a decrease in cell performance which we believe to be due to an unidentified source of impurities.

Zook, J. D.↗

Investigation of steady and fluctuating pressures associated with the transonic buffeting and wing rock of a one-seventh scale model of the F-5A aircraft

A wind tunnel test of a 1/7 scale F-5A model is described. The pressure, force, and dynamic response measurements during buffet and wing rock are evaluated. Effects of Mach number, angle of attack, sideslip angle, and control surface settings were investigated. The mean and fluctuating static pressure data are presented and correlated with some corresponding flight test data of a F-5A aircraft. Details of the instrumentation and the specially designed support system which allowed the model to oscillate in roll to simulate wing rock are also described. A limit cycle mechanism causing wing rock was identified from this study, and this mechanism is presented.

Hwang, C.↗

A model for the pilot's use of motion cues in roll-axis tracking tasks

Simulated target-following and disturbance-regulation tasks were explored with subjects using visual-only and combined visual and motion cues. The effects of motion cues on task performance and pilot response behavior were appreciably different for the two task configurations and were consistent with data reported in earlier studies for similar task configurations. The optimal-control model for pilot/vehicle systems provided a task-independent framework for accounting for the pilot's use of motion cues. Specifically, the availability of motion cues was modeled by augmenting the set of perceptual variables to include position, rate, acceleration, and accleration-rate of the motion simulator, and results were consistent with the hypothesis of attention-sharing between visual and motion variables. This straightforward informational model allowed accurate model predictions of the effects of motion cues on a variety of response measures for both the target-following and disturbance-regulation tasks.

Levison, W. H.↗

Determination of subcritical frequency and damping from B-1 flight flutter test data

The application of the time-lag products correlation/frequency analysis procedure to determine subcritical frequency and damping from structural response measurements made during flight flutter test of the B-1 prototype airplane is described. The analysis procedure, the test airplane, and flight test procedures are discussed. Summary frequency and damping results are presented for six transonic flight conditions. Illustrative results obtained by applying various options and variations of the analysis method are included for one flight condition.

Dobbs, S. K.↗

The Space Shuttle Ground Terminal Delta Modulation System

Shuttle voice processing uses a Variable Slope Delta Modulation scheme which is a variant of the ABATE algorithm. This paper summarizes the ground terminal subsystem which processes the multiplexed voice and telemetry data digital sequence in the downlink processing and digitizes the voice signal in the uplink processing. The Delta Modulation System (DMS) performance characteristics are given in terms of an intelligibility test score and in terms of time and frequency responses measured on a production system developed for NASA Goddard Space Flight Center. Implementation details of the encoder and decoder algorithms are given in terms of the circuit logic used to implement them.

Auger, R. L.↗

Lunar interaction with the solar wind - Effects on lunar electrical conductivity estimates

The lunar electromagnetic response, measured at very low frequencies with the moon in the solar wind, is used to evaluate interior electrical conductivity at great depth and to determine limits on the size of possible lunar core. A theory is developed wherein compression of the magnetic field in the lunar tail cavity caused by inflowing plasma at the lunar limbs and in the lunar wake, bends the magnetic field in the lunar interior and thereby alters the tangential component of magnetic field observed on the dayside surface. This theory strongly indicates that cavity fringing cannot explain the enhanced East-West fluctuations. It is proposed that the East-West fluctuations might be due to diamagnetic currents caused by lunar surface photoelectrons in the lunar terminator region.

Goldstein, B. E.↗

Response of defects to illumination in silicon solar cells

The enhancement of diffusion length with intensity was examined using spectral response measurements in solar cells based on Silso silicon and EFG silicon ribbon. Local diffusion length variations at defect sites were investigated as a function of illumination level using a scanning electron microscope operated in the electron beam induced current mode. An increase of diffusion length was observed at defect sites as the intensity level was increased. The diffusion length improvements are explained on the basis of saturation of minority carrier traps in these materials. The trap distribution in Silso silicon is shown to be peaked near (Ec - 0.7)eV. EFG silicon ribbon shows a broad, Gaussian distribution of traps located near (Ec - 0.5)eV.

Hari Rao, C. V.↗

Thin n-i-p radiation-resistant solar cell feasibility study

Silicon solar cells were fabricated to verify the predictions that: (1) thin n(+)pp(+) cells can provide high values of open circuit voltage even when high resistivity base material ( 1000 omega-cm) is used; (2) cells with good p(+) back contacts will display an increase in open circuit voltage with decreasing cell thickness; and (3) high quality, thin, high resistivity, solar cells can be made using processing compatible with conventional practice. Analysis of I-V and spectral response measurements of these cells confirmed theoretical predictions and thereby pointed to voltages beyond the near 600 mV obtained in this study.

Allison, J. F.↗

Procedure M - An advanced procedure for stratified area estimation using Landsat

Procedure M is a systematic approach to processing multispectral scanner data for classification and acreage estimation. The procedure incorporates a statistically robust mechanism for estimation while utilizing component technologies that are based on the physically expected or measured responses of the canopy, atmosphere and sensor. This paper describes Procedure M in the context of large-area agricultural applications, emphasizing three specific configurations: for winter wheat, spring small grains, and corn and soybeans.

Holmes, Q. A.↗

Recent progress in picosecond pulse generation from semiconductor lasers

This paper reviews the recent progress in producing picosecond optical pulses from semiconductor laser diodes. The discussion concentrates on the mode-locking of a semiconductor laser diode in an external resonator. Transform-limited optical pulses ranging from several picoseconds to subpicosecond durations have been observed with active and passive mode-locking. Even though continuing research on the influence of impurities and defects on the mode-locking process is still needed, this technique has good promise for being utilized in fiber-optic communication systems. Alternative methods of direct electrical and optical excitation to produce ultrashort laser pulses are also described. They can generate pulses of similar widths to those obtained by mode-locking. The pulses generated will find applications in laser ranging and detector response measurement.

Auyeung, J. C.↗