Search NASA⌕ Search

SEARCH · Search NASA

Results for “Metal Surfaces”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14
All sourcesNASA NTRSDOE OSTI
NASA NTRS1991

Sapphire fiber interferometer for microdisplacement measurements at high temperatures

We report the use of a short-length, multimode sapphire rod as an extension to a Michelson configuration, but operated as a low-finesse Fabry-Perot cavity. We demonstrate the performance of such a device as an interferometric sensor, where the interference between the reflections from the sapphire-air interface and an air-metallic surface is observed for microdisplacement of the metallic surface which is placed close to the sapphire endface. We describe in detail the fabrication procedure and present results obtained from the detection of temperature changes, applied strain, and surface acoustic waves.

Murphy, Kent A.↗
DOE OSTI2023

Interplay between Facets and Defects during the Dissociative and Molecular Adsorption of Water on Metal Oxide Surfaces

Both surface terminations and defects play a central role in determining how water interacts with metal oxides, thereby setting important properties of the interface that govern reactivity such as the type and distribution of hydroxyl groups. However, the interconnections between facets and defects remain poorly understood, limiting the usefulness of conventional notions such as that hydroxylation is controlled by metal cation exposure at the surface. Here, using hematite (α-Fe 2 O 3 ) as a model system, we show how oxygen vacancies overwhelm surface cation-dependent hydroxylation behavior. Synchrotron-based ambient-pressure X-ray photoelectron spectroscopy was used to monitor the adsorption of molecular water and its dissociation to form hydroxyl groups in situ on (001), (012), or (104) facet-engineered hematite nanoparticles. Supported by density functional theory calculations of the respective surface energies and oxygen vacancy formation energies, the findings show how oxygen vacancies are more prone to form on higher energy facets and induce surface hydroxylation at extremely low relative humidity values of 5 x10 - 5 %. Further, when these vacancies are eliminated, the extent of surface hydroxylation across the facets is as expected from the areal density of exposed iron cations at the surface. These findings help answer fundamental questions about the nature of reducible metal oxide-water interfaces in natural and technological settings and lay the groundwork for rational design of improved oxide-based catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Capturing the Coverage Dependence of Aromatics’ Adsorption through Mean-Field Models

To capture the dominant interactions (surface-mediated and through-space steric) in catalytic hydrodeoxygenation systems, coverage-dependent mean-field models of aromatic adsorption are developed on Pt(111) and Ru(0001). We derive three key insights from this work: (1) we can universally apply mean-field models to capture the coverage-dependent behavior of oxygenated aromatics on transition metal surfaces, (2) we can deconvolute surface-mediated and throughspace steric interactions from the mean-field model, and (3) we can develop relatively accurate models that predict the adsorption energy of aromatics on transition metal surfaces for the full coverage range using the work function at lowest modeled coverage. In conclusion, our approach enables the rapid prediction of coverage-dependent behavior of oxygenated aromatics on transition metal surfaces, reducing the computational cost associated with these studies by an order of magnitude.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Engineering metal–metal oxide surfaces for high-performance oxygen reduction on Ag–Mn electrocatalysts

Understanding fundamental material–property relationships in mixed-element catalyst systems is crucial to advancing the viability of renewable electrochemical energy technologies, an important part of creating a more sustainable future. Herein, we report our insight on the nature and dynamics of highly active silver–manganese oxide (Ag–MnOx) catalyst surfaces for the oxygen reduction reaction (ORR) via a combined experimental–theoretical approach. Experimentally, we synthesize well-mixed Ag–Mn co-deposited thin films that are measurably flat and smooth, despite Mn surface migration and oxidation upon air exposure and electrochemical measurements. Cyclic voltammetry in 0.1 M KOH demonstrates up to 10-fold specific activity enhancements over pure Ag at 0.8 V vs. RHE for Ag-rich films (70–95% Ag in bulk). To further understand the Ag–Mn system, separate samples were synthesized with small amounts of Mn sequentially deposited onto the surface of a pure Ag thin film (Mn@Ag), ranging from partial to full surface coverage (down to 0.3 nm Mn $cm^{-2}_{geo}$ ~ 0.2 μg Mn $cm^{-2}_{geo}$). These sequentially deposited Mn@Ag films show analogous performance to their co-deposited counterparts indicating similar enhanced active sites. With density functional theory (DFT), we calculate that this enhancement arises from the tuned d-band of these material surfaces owing to the optimal hybridization of the electronic structures in specific Ag and MnO x geometries. Together, electrochemical measurements, DFT calculations, X-ray absorption spectroscopy, and valence-band X-ray photoelectron spectroscopy suggest synergistic electronic interactions between Ag and MnOx yield enhanced oxygen adsorption, and thus ORR activity, with DFT highlighting the Ag–MnO x interface sites as the most enhanced. This work demonstrates how combined experimental–theoretical methods can help design electrocatalysts with enhanced electrocatalytic properties and understand the nature of complex mixed metal–metal oxide surfaces.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Structural and Catalytic Properties of Isolated Pt 2+ Sites in Platinum Phosphide (PtP 2 )

This article describes the synthesis and catalytic properties of supported, 2-3 nm platinum phosphide (PtP 2 ) nanoparticles (NPs). Depending on the P loading, two PtP 2 structures are formed, that is, a PtP 2 surface on a (metallic) Pt core (Pt@PtP 2 ) and single-phase PtP 2 NPs. The structures were determined using extended X-ray absorption fine structure , in situ synchrotron X-ray diffraction, and scanning transmission electron microscopy. In PtP 2 NPs, Pt 2+ ions are geometrically isolated by P 2 2- ions, at a Pt-Pt distance of 4.02 Å, which is much longer than 2.78 Å in (metallic) Pt NPs. The oxidation state of Pt in PtP 2 NPs was determined by in situ X-ray absorption near-edge structure and in situ X-ray photoelectron spectroscopy and was found to be consistent with Pt 2+ ions even after treatment in H 2 at 550 °C. Unlike Pt NPs, which are highly active for propylene hydrogenation at room temperature, PtP 2 NPs are not active below about 150 °C, suggesting the absence of metallic surface Pt. In contrast to metallic Pt, which is poorly selective for acetylene hydrogenation, PtP 2 NPs display high selectivity toward ethylene. PtP 2 , also has high olefin selectivity for propane dehydrogenation, although the rate per g Pt is about 7 times lower than that of metallic Pt NPs of the same size. In situ resonant inelastic X-ray scattering spectroscopy shows that the energy of the filled Pt 5d valence orbitals is 1.5 eV lower than that of metallic Pt, which leads to weaker adsorbate binding consistent with its catalytic properties. Here, a H 2 -stable Pt 2+ site suggests different catalytic applications for these catalysts as compared to Pt NPs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Electroanalytical Sensors for Liquid Fueled Fluoride Molten Salt Reactor

ThorCon is developing a thermal thorium / uranium molten salt fueled reactor that uses a fuel salt consisting of NaF - BeF 2 - ThF 4 - UF 4 - UF 3 , which uses 19.75% enriched uranium. It is not a breeder reactor but requires regular additions of fissile material. On-site fuel processing is limited to adding make-up fuel, and adding beryllium to maintain redox balance in the fuel salt. The fluoride salt is an excellent flux that will strip the protective oxygen away from all metal surfaces it contacts. In order to protect the metal surfaces in the primary loop, no free fluorine is allowed. Maintaining a ratio of UF 4 to UF 3 provides a chemical buffer that can absorb any free fluorine released during the fission process before it can harm the structure. Periodic additions of metallic beryllium to the fuel salt will react with UF 4 to form BeF 2 and UF 3 , which will maintain the desired UF 4 /UF 3 ratio. A means to measure the UF 4 /UF 3 ratio is important to maintain the fuel salt in a non-corrosive state and could also provide additional insight into the corrosion behavior and chemical constitution of the system. A promising measurement technique is based on electrochemistry.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
NASA NTRS2006

Material Interactions with Solar Wind Ion Environments

Solar wind composition is dominated by hydrogen (approx.96%) and helium (approx.3 to 4%) with a minor fraction (less than or equal to 1%) of heavy ions. Hydrogen (helium) ions impact spacecraft surfaces with energies from 0.5 to 5 keV (1.8 to 21 keV) due to variations in solar wind velocity from 300 km/s to 1000 km/sec with extremes of a few 10 s keV during periods of extremely high solar wind velocity exceeding 1000 km/sec. Mean impact energies are typically on the order of approximately 1 keV and 4 keV for hydrogen ions and helium ions, respectively. These energies are typically of the peak of the energy dependent light ion sputter yields for hydrogen and helium on many metals. In addition, light ions with kilovolt energies have been shown to produce blister (or exfoliation) damage to metal surfaces due to formation of high pressure gas bubbles within the materials when exposed to ion fluences on the order of 10(exp 16 to (10(exp 17 ions/sq cm. A number of spacecraft designs for current and future missions include gossamer polymer structures with thin metallic reflection coatings to shield instruments from the Sun or solar sail propulsion systems for use in a variety of locations in the inner solar system from 0.5 to 1 AU. In addition, there is interest in designing spacecraft for solar physics missions requiring operations as close to the Sun as 0.16 to 0.2 AU. Integrity of the metallic coatings is critical in many of these applications since degradation will result in modification of material thermal properties or exposure of polymers to solar UV photons which can compromise mission requirements. This paper will evaluate the relative contributions of sputtering and blister formation to material degradation in solar wind environments over a range of radial distances from the Sun to demonstrate where solar wind environments become important for materials selection. We will first review the physics and results from laboratory measurements of light ion sputtering, blistering, and exfoliation of metallic surfaces to establish the order of magnitude ion fluence required for significant surface damage. Solar wind ion fluence environments will then be evaluated due to variations in solar wind conditions as a function of solar cycle for varying distances from the Sun using models for radial variations in solar wind ion number density, temperature, and velocity to determine where sputtering and blistering is most likely to be an issue. Finally, ion fluence statistics for varying radial distances from the Sun will be shown to establish the mission duration and radial distances from the Sun where missions will encounter sufficient ion fluence to exhibit damage to metallic surfaces.

Minow, Joseph I.↗
NASA NTRS1982

Method of bonding plasticized elastomer to metal and articles produced thereby

Plasticized elastomer was securely bonded to a metal surface by interposing between the adhesive-coated metal surface and the elastomer sheet of material obtained by combining adhesive with a portion of the elastomer that was treated to remove plasticizers therefrom and heating the assembly in a mold under pressure. The sheet material is made up by dissolving a portion of the plasticized elastomer in an organic solvent, casting the solution, exposing it to a vacuum to remove the solvent and plasticizers, dissolving the deplasticized material in liquid adhesive and casting and drying the resulting liquid.

White, W. T.↗
DOE OSTI2020

Photonic Doppler velocimetry of ohmically exploded aluminum surfaces

Photonic Doppler Velocimetry (PDV) was used to measure the exploding surface of coated metal driven by lineal current density increasing at 3 × 10 15 A/m/s. Here, aluminum-6061 rods were coated with three thicknesses (5, 17, and 41 μm) of Parylene-N and driven to 850 kA in approximately 100 ns, with the metal thicker than the skin depth. According to PDV, the metal surface melts at 85 ± 13 T and expands with a constant acceleration. Then, at surface magnetic field 140-180 T, the metal acceleration begins to increase in time. Later, plasma forms on, and is correlated with PDV signal loss from, uncoated aluminum rods, 5-μm-coated rods, and 17-μm-coated rods, while no evidence suggests plasma forms on 41-μm-coated metal.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS1988

X-ray fluorescence surface contaminant analyzer: A feasibility study

The bonding of liner material to the inner metal surfaces of solid rocket booster cases is adversely affected by minute amounts of impurities on the metal surface. Suitable non-destructive methods currently used for detecting these surface contaminants do not provide the means of identifying their elemental composition. The feasibility of using isotopic source excited energy dispersive X-ray fluorescence as a possible technique for elemental analysis of such contaminants is investigated. A survey is made of the elemental compositions of both D-6ac steel, a common construction material for the booster cases, and Conoco HD-2 grease, a common surface contamination. Source and detector choices that maximize signal to noise ratio in a Recessed Source Geometry are made. A Monte Carlo simulation is then made of the optimized device incorporating the latest available X-ray constants at the energy of the chosen source to determine the device's response to a D-6ac steel surface contained with Conoco HD-2 grease.

Eldridge, Hudson B.↗
DOE OSTI2020

Roles of Carburization and Oxidation on Transition-Metal Catalyzed Surface Reactions

Many industrial chemical transformation processes are based on reactions catalyzed by transition metals. In some cases the nano-size particles used as catalysts are synthesized simultaneously or right before the initiation of the main catalytic reaction. Synthesis treatments involve complex processes such as reductions followed by calcinations in oxygenated environments coupled to the presence of gases used for the main reaction. Synthesis details are crucial because they have important consequences on the catalyst shape, size, and chemical composition, and may also affect the structure and composition of the catalyst support. All these effects may alter the main catalyzed reaction in unexpected ways. This work focuses on the synthesis of the overall catalytic system that includes catalyst and support taking place in parallel with the initial stages of the main catalyzed reaction. Two important processes are characterized: carburization and oxidation of the transition metal catalyst during synthesis or initial stages of the main reaction. The objective is to understand how the coking mechanism coupled to surface oxidation and changes in the substrate influence the dry reforming of methane taken as a model reaction. The approach uses first principles computational methods to investigate the catalyst synthesis and characterization and catalytic reaction mechanisms. These studies are complemented with experimental characterization done by the group of Dr. Renu Sharma at the National Institute of Standards and Technology (unfunded collaborator) using high resolution transmission electron microscopy. Specific goals are to identify the role of the synthesis process on the initial nanocatalyst structure and composition, and to determine how that structure and composition may evolve after being exposed to the reactants atmosphere. These studies facilitate a systematic analysis of conditions where the nanoparticle composition can be optimized regarding activity and stability. Moreover, the fundamental study of catalyst/support interactions yields valuable insights for other catalytic processes and is a first step toward controlled nanocatalyst synthesis.

36 MATERIALS SCIENCE↗
NASA NTRS2010

Optical Structural Health Monitoring Device

This non-destructive, optical fatigue detection and monitoring system relies on a small and unobtrusive light-scattering sensor that is installed on a component at the beginning of its life in order to periodically scan the component in situ. The method involves using a laser beam to scan the surface of the monitored component. The device scans a laser spot over a metal surface to which it is attached. As the laser beam scans the surface, disruptions in the surface cause increases in scattered light intensity. As the disruptions in the surface grow, they will cause the light to scatter more. Over time, the scattering intensities over the scanned line can be compared to detect changes in the metal surface to find cracks, crack precursors, or corrosion. This periodic monitoring of the surface can be used to indicate the degree of fatigue damage on a component and allow one to predict the remaining life and/or incipient mechanical failure of the monitored component. This wireless, compact device can operate for long periods under its own battery power and could one day use harvested power. The prototype device uses the popular open-source TinyOS operating system on an off-the-shelf Mica2 sensor mote, which allows wireless command and control through dynamically reconfigurable multi-node sensor networks. The small size and long life of this device could make it possible for the nodes to be installed and left in place over the course of years, and with wireless communication, data can be extracted from the nodes by operators without physical access to the devices. While a prototype has been demonstrated at the time of this reporting, further work is required in the system s development to take this technology into the field, especially to improve its power management and ruggedness. It should be possible to reduce the size and sensitivity as well. Establishment of better prognostic methods based on these data is also needed. The increase of surface roughness with fatigue is closely connected to the microstructure of the metal, and ongoing research is seeking to connect this observed evidence of the fatigue state with microstructural theories of fatigue evolution to allow more accurate prognosis of remaining component life. Plans are also being discussed for flight testing, perhaps on NASA s SOFIA platform.

Buckner, Benjamin D.↗
DOE OSTI2021

Site 2 of the Yersinia pestis substrate-binding protein YfeA is a dynamic surface metal-binding site

The substrate-binding protein YfeA (also known as YPO2439 or y1897) is a polyspecific metal-binding protein that is crucial for nutrient acquisition and virulence in Yersinia pestis, the causative microbe of plague. YfeA folds into a monomeric c-clamp like other substrate-binding proteins and has two metal-binding sites (sites 1 and 2). Site 2 is a bidentate surface site capable of binding Zn and Mn atoms and is a unique feature of YfeA. Occasionally, the site 2 residues of two YfeA molecules will cooperate with the histidine tag of a third YfeA molecule in coordinating the same metal and lead to metal-dependent crystallographic packing. Here, three crystal structures of YfeA are presented at 1.85, 2.05 and 2.25 Å resolution. A comparison of the structures reveals that the metal can be displaced at five different locations ranging from ~4 to ~16 Å away from the canonical site 2. These observations reveal different configurations of site 2 that enable cooperative metal binding and demonstrate how site 2 is dynamic and freely available for inter-protein metal coordination.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2025

An impermeable copper surface monolayer with high-temperature oxidation resistance

Despite numerous efforts involving surface coating, doping, and alloying, maintaining surface stability of metal at high temperatures without compromising intrinsic properties has remained challenging. Here, we present a pragmatic method to address the accelerated oxidation of Cu, Ni, and Fe at temperatures exceeding 200 °C. Inspired by the concept that oxygen (O) itself can effectively obstruct the pathway of O infiltration, this study proposes the immobilization of O on the metal surface. Through extensive calculations considering various elements (C, Al, Si, Ge, Ga, In, and Sn) to anchor O on Cu surfaces, Si emerges as the optimal element. The theoretical findings are validated through systematic sputtering deposition experiments. The introduction of anchoring elements to reinforce Cu–O bonds enables the formation of an atomically thin barrier on the Cu surface, rendering it impermeable to O even at high temperatures (400 °C) while preserving its intrinsic conductivity. This oxidation resistance, facilitated by the impermeable atomic monolayer, opens promising opportunities for researchers and industries to overcome limitations associated with the use of oxidizable metal films.

36 MATERIALS SCIENCE↗
NASA NTRS1972

Diffusion bonding and its application to manufacturing

In its simplest form diffusion bonding is accomplished by placing clean metal surfaces together under a sufficient load and heating. The natural interatomic attractive force between atoms transforms the interface into a natural grain boundary. Therefore, in principle, the properties of the bond area are identical to those of the parent metal. Other advantages of diffusion bonding over conventional methods of bonding include freedom from residual stresses, excessive deformation, foreign metals, or changed crystal structures. Stainless steels, nickel-base superalloys, and aluminum alloys have all been successfully joined. Complex hardware, including integrated flueric devices, jet engine servovalves, and porous woven structures have been fabricated. The processing involved is discussed, along with such theoretical considerations as the role of metal surfaces, the formation of metal contact junctions, and the mechanisms of material transport in diffusion bonding.

Spurgeon, W. M.↗
DOE OSTI2024

2D Metal/Graphene and 2D Metal/Graphene/Metal Systems for Electrocatalytic Conversion of CO 2 to Formic Acid

Abstract Efficiently transforming CO 2 into renewable energy sources is crucial for decarbonization efforts. Formic acid (HCOOH) holds great promise as a hydrogen storage compound due to its high hydrogen density, non‐toxicity, and stability under ambient conditions. However, the electrochemical reduction of CO 2 (CO 2 RR) on conventional carbon black‐supported metal catalysts faces challenges such as low stability through dissolution and agglomeration, as well as suffering from high overpotentials and the necessity to overcome the competitive hydrogen evolution reaction (HER). In this study, we modify the physical/chemical properties of metal surfaces by depositing metal monolayers on graphene (M/G) to create highly active and stable electrocatalysts. Strong covalent bonding between graphene and metal is induced by the hybridization of sp and d orbitals, especially the sharp , , and orbitals of metals near the Fermi level, playing a decisive role. Moreover, charge polarization on graphene in M/G enables the deposition of another thin metallic film, forming metal/graphene/metal (M/G/M) structures. Finally, evaluating overpotentials required for CO 2 reduction to HCOOH, CO, and HER, we find that Pd/G, Pt/G/Ag, and Pt/G/Au exhibit excellent activity and selectivity toward HCOOH production. Our novel 2D hybrid catalyst design methodology may offer insights into enhanced electrochemical reactions through the electronic mixing of metal and other p‐block elements.

Cho, Jinwon↗
DOE OSTI2024

2D Metal/Graphene and 2D Metal/Graphene/Metal Systems for Electrocatalytic Conversion of CO 2 to Formic Acid

Efficiently transforming CO 2 into renewable energy sources is crucial for decarbonization efforts. Formic acid (HCOOH) holds great promise as a hydrogen storage compound due to its high hydrogen density, non-toxicity, and stability under ambient conditions. However, the electrochemical reduction of CO 2 (CO 2 RR) on conventional carbon black-supported metal catalysts faces challenges such as low stability through dissolution and agglomeration, as well as suffering from high overpotentials and the necessity to overcome the competitive hydrogen evolution reaction (HER). In this study, we modify the physical/chemical properties of metal surfaces by depositing metal monolayers on graphene (M/G) to create highly active and stable electrocatalysts. Strong covalent bonding between graphene and metal is induced by the hybridization of sp and d orbitals, especially the sharp $d_{z^2}$, $d_{yz}$, $d_{xz}$ orbitals of metals near the Fermi level, playing a decisive role. Moreover, charge polarization on graphene in M/G enables the deposition of another thin metallic film, forming metal/graphene/metal (M/G/M) structures. Finally, evaluating overpotentials required for CO 2 reduction to HCOOH, CO, and HER, we find that Pd/G, Pt/G/Ag, and Pt/G/Au exhibit excellent activity and selectivity toward HCOOH production. Our novel 2D hybrid catalyst design methodology may offer insights into enhanced electrochemical reactions through the electronic mixing of metal and other p-block elements.

2D Electrocatalysts↗