Search NASA⌕ Search

SEARCH · Search NASA

Results for “Profiling optimization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Site B - NREL ASSIST (SN11) Thermodynamic Retrievals TROPoe / Derived Data

This dataset contains daily files with thermodynamic profiles retrieved with the optimal estimation physical retrieval TROPoe v0.12 (Turner and Löhnert 2014; Turner and Blumberg 2019; Turner and Löhnert 2021). The profiles are retrieved every 10 minutes from instantaneous observations from the NREL ASSIST-II (SN 11) infrared spectrometer. Observations are noise-filtered but not averaged in time to minimize errors due to non-uniform clouds. Additional input data in TROPoe are cloud base height (CBH), which is a combined data product that uses data from ceilometers at sites A1 and H and scanning lidars from ARM sites C1 and E37. The CBH is weighted inversely proportionally to the distance to the respective site to take into account the spatial variability of clouds (see https://github.com/StefanoWind/ASSIST_analysis/blob/main/awaken_processing/combine_cbh.py). The full pipeline for running the retrieval is available at https://github.com/StefanoWind/TROPoe_processor. Met data was not ingested. In addition to these temporally resolved input data, TROPoe requires an a priori dataset (prior) that provides mean climatological estimates of thermodynamic profiles and specifies how temperature and humidity covary with height as an input (for details see, e.g., Djalalova et al. 2022). The prior is a key component of the retrieval and provides a constraint on the ill-posed inversion problem. A monthly prior was computed from operational radiosonde launches at ARM SGP, OK.

17 WIND ENERGY↗
DOE OSTI2025

Site G - NREL ASSIST (SN10) Thermodynamic Retrievals TROPoe / Derived Data

This dataset contains daily files with thermodynamic profiles retrieved with the optimal estimation physical retrieval TROPoe v0.12 (Turner and Löhnert 2014; Turner and Blumberg 2019; Turner and Löhnert 2021). The profiles are retrieved every 10 minutes from instantaneous observations from the NREL ASSIST-II (SN 10) infrared spectrometer. Observations are noise-filtered but not averaged in time to minimize errors due to non-uniform clouds. Additional input data in TROPoe are cloud base height (CBH), which is a combined data product that uses data from ceilometers at sites A1 and H and scanning lidars from ARM sites C1 and E37. The CBH is weighted inversely proportionally to the distance to the respective site to take into account the spatial variability of clouds (see https://github.com/StefanoWind/ASSIST_analysis/blob/main/awaken_processing/combine_cbh.py). The full pipeline for running the retrieval is available at https://github.com/StefanoWind/TROPoe_processor. Met data was not ingested. In addition to these temporally resolved input data, TROPoe requires an a priori dataset (prior) that provides mean climatological estimates of thermodynamic profiles and specifies how temperature and humidity covary with height as an input (for details see, e.g., Djalalova et al. 2022). The prior is a key component of the retrieval and provides a constraint on the ill-posed inversion problem. A monthly prior was computed from operational radiosonde launches at ARM SGP, OK.

17 WIND ENERGY↗
DOE OSTI2025

Site C1a - NREL ASSIST (SN12) Thermodynamic Retrievals TROPoe / Derived Data

This dataset contains daily files with thermodynamic profiles retrieved with the optimal estimation physical retrieval TROPoe v0.12 (Turner and Löhnert 2014; Turner and Blumberg 2019; Turner and Löhnert 2021). The profiles are retrieved every 10 minutes from instantaneous observations from the NREL ASSIST-II (SN 12) infrared spectrometer. Observations are noise-filtered but not averaged in time to minimize errors due to non-uniform clouds. Additional input data in TROPoe are cloud base height (CBH), which is a combined data product that uses data from ceilometers at sites A1 and H and scanning lidars from ARM sites C1 and E37. The CBH is weighted inversely proportionally to the distance to the respective site to take into account the spatial variability of clouds (see https://github.com/StefanoWind/ASSIST_analysis/blob/main/awaken_processing/combine_cbh.py). The full pipeline for running the retrieval is available at https://github.com/StefanoWind/TROPoe_processor. Met data was not ingested. In addition to these temporally resolved input data, TROPoe requires an a priori dataset (prior) that provides mean climatological estimates of thermodynamic profiles and specifies how temperature and humidity covary with height as an input (for details see, e.g., Djalalova et al. 2022). The prior is a key component of the retrieval and provides a constraint on the ill-posed inversion problem. A monthly prior was computed from operational radiosonde launches at ARM SGP, OK.

17 WIND ENERGY↗
DOE OSTI2025

Rhode Island Site - NREL ASSIST Thermodynamic Retrievals TROPoe v0.19 / Derived Data

This dataset contains daily files with thermodynamic profiles retrieved with the optimal estimation physical retrieval TROPoe v0.19 (Turner and Löhnert, 2014; Turner and Blumberg, 2019; Turner and Löhnert, 2021). The profiles are retrieved every 10 minutes from instantaneous observations from the NREL ASSIST-II (SN 12) infrared spectrometer. Observations are noise-filtered but not averaged in time to minimize errors due to non-uniform clouds. Additional input data in TROPoe are cloud base height from the collocated NREL upgraded Galion lidar (Newsom et al., 2019), and surface temperature, relative humidity, and pressure from the collocated PNNL met tower. The full pipeline to run the retrieval is available at https://github.com/StefanoWind/TROPoe_processor. In addition to these temporally resolved input data, TROPoe requires an a priori dataset (prior) that provides mean climatological estimates of thermodynamic profiles and specifies how temperature and humidity covary with height as an input (for details see, e.g., Djalalova et al., 2022). The prior is a key component of the retrieval and provides a constraint on the ill-posed inversion problem. A monthly prior was computed from operational radiosonde launches at Upton, NY.

17 WIND ENERGY↗
DOE OSTI2026

FC Site 4.0 - NLR Thermodynamic profiler (ASSIST II-11) Thermodynamic Retrievals TROPoe

This dataset contains daily files with thermodynamic profiles retrieved with the optimal estimation physical retrieval TROPoe v0.19 (Turner and Löhnert 2014; Turner and Blumberg 2019; Turner and Löhnert 2021). The profiles are retrieved every 10 minutes from instantaneous observations from the NLR ASSIST II infrared spectrometer. Observations are noise-filtered but not averaged in time to minimize errors due to non-uniform clouds. Additional input data in TROPoe are cloud base height (CBH) from co-located scanning lidar. The full pipeline for running the retrieval is available at https://github.com/StefanoWind/TROPoe_processor. Met data was not ingested. In addition to these temporally resolved input data, TROPoe requires an a priori dataset (prior) that provides mean climatological estimates of thermodynamic profiles and specifies how temperature and humidity covary with height as an input (for details see, e.g., Djalalova et al. 2022). The prior is a key component of the retrieval and provides a constraint on the ill-posed inversion problem. A monthly prior was computed from operational radiosonde launches in Denver, CO.

17 WIND ENERGY↗
DOE OSTI2026

Integrative SP3 Workflow for Multi-PTM Proteomics Profiling (TZ-DP0)

The goal of the experiment was to demonstrate that the optimized multiplexed multi-PTM profiling workflow can comprehensively and quantitatively capture dynamic changes in protein abundance, cysteine oxidation, phosphorylation, and acetylation in cytokine-induced inflammatory stress in mouse pancreatic ß-cells. Global proteomic, redox proteomic, phosphoproteomic, and acetylomic were data collected from mouse Beta-TC-6 pancreatic Beta-cells, untreated (mock) and cytokine-treated Beta-cells at 4, 8, and 24 hours with 4 biological replicates. Samples were digested with trypsin and Lys-C, then analyzed by LC-MS/MS. Data were searched with MS-GF+, MASIC, and MaxQuant using PNNL's DMS processing pipeline.

59 BASIC BIOLOGICAL SCIENCES↗
NASA NTRS1977

Application of numerical optimization to the design of supercritical airfoils without drag-creep

Recent applications of numerical optimization to the design of advanced airfoils for transonic aircraft have shown that low-drag sections can be developed for a given design Mach number without an accompanying drag increase at lower Mach numbers. This is achieved by imposing a constraint on the drag coefficient at an off-design Mach number while the drag at the design Mach number is the objective function. Such a procedure doubles the computation time over that for single design-point problems, but the final result is worth the increased cost of computation. The ability to treat such multiple design-point problems by numerical optimization has been enhanced by the development of improved airfoil shape functions. Such functions permit a considerable increase in the range of profiles attainable during the optimization process.

Hicks, R. M.↗
DOE OSTI2024

Conceptual Design of Integrated Energy Systems with Market Interaction Surrogate Models

Most integrated energy system (IES) optimization frameworks employ the price-taker approximation, which ignores important interactions with market and can result in overestimated economic values. In this work, we pro-pose a machine learning surrogate-assisted optimization framework to quantify the IES/market interactions and thus go beyond price taker. We use time series clustering to generate representative IES operation profiles for the IES optimization problem and use machine learning surrogate models to predict the IES/market interaction. We quantify the accuracy of the time series clustering and surrogate models in a case study to optimally retrofit a nuclear power plant with polymer electrolyte membrane electrolyzer to co-produce electricity and hydrogen.

Chen, Xinhe↗
NASA NTRS1992

Optimization methods for passive damper placement and tuning

The effectiveness of viscous elements in introducing damping in a structure is a function of several variables, including their number, their location in the structure, and their physical properties. In this paper several optimization problems are posed to optimize these variables. The paper investigates various metrics to define the optimization problem, and compares the damping profiles that are obtained. Both discrete and continuous optimization problems are formulated and solved, corresponding, respectively, to the problems of placement of damping elements and to the tuning of their parameters. The paper particularly emphasizes techniques to make feasible the large scale problems resulting from the optimization formulations. Numerical results involving a lightly damped tested structure are presented.

Milman, M. H.↗
DOE OSTI2025

Spent Nuclear Fuel Receipt Rate Analysis within an Integrated Waste Manage-ment System Architecture that Includes Consolidated Interim Storage

A key parameter in analyzing the performance of an integrated waste management system (IWMS) architecture for the disposition of spent nuclear fuel (SNF) is the SNF receipt rate from reactor and other custodian sites. The introduction of one or more federal consolidated interim storage facilities (CISFs) into the IWMS architecture can enable the receipt rate profile as a function of time to be accelerated relative to system architectures without a CISF. The question then arises as to what an optimal SNF receipt rate profile for an IWMS architecture might be in view of practical constraints and desired system performance attributes and associated metrics. This paper describes a sensitivity study on SNF receipt rates and the associated results for a selected set of IWMS scenarios aimed an in-forming near-term planning for interim storage capabilities and transportation assets. Two different strategies are compared, one that fills an initial CISF quickly and then idles the transportation system while a disposal system is prepared, and a second strategy that aims to provide a more continuous use of transportation assets and receipt capabilities at the IWMS while the disposal system is readied for SNF receipt. Cost considerations and other factors such as impact on timing of clearing reactor sites of SNF, efficient use of capital assets, and other metrics, including those which may be important to a CISF host community, are examined. Based on the analysis, an initial approach is presented targeting a continuous receipt strategy while having the flexibility to step up receipt capabilities to a reasonable degree when needed and beneficial within overall system constraints.

11 - NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2024

Simultaneous control of the electron temperature and safety factor profiles in DIII-D using model-based optimal control techniques

Future tokamak power plants will likely operate using a single, well-defined plasma scenario, either in steady state or for very long pulse lengths. In order to enhance the robustness of the scenario, feedback controllers for a variety of plasma properties will be necessary to counteract any disturbances and ensure safe operation. However, only a limited set of actuators will be available to control many different quantities. Because of this, it is necessary to develop controllers that are able to regulate multiple plasma properties using a limited set of actuators. To this end, a controller has been developed for the simultaneous regulation of both the electron temperature and safety factor profiles in DIII-D. This algorithm uses a linear quadratic integral control synthesis approach based on a linearized model of the dynamics of the two profiles. Two neural network surrogate models, NubeamNet and MMMnet, are included to improve the fidelity of the model. Furthermore, the controller has been tested in simulation using COTSIM, and has demonstrated the ability to simultaneously track changes in both the electron temperature and safety factor targets, including changes in both the magnitude and the shape of the profiles.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS2011

Improvement of OMI Ozone Profile Retrievals in the Troposphere and Lower Troposphere by the Use of the Tropopause-Based Ozone Profile Climatology

An advance algorithm based on the optimal estimation technique has beeen developed to derive ozone profile from GOME UV radiances and have adapted it to OMI UV radiances. OMI vertical resolution : 7-11 km in the troposphere and 10-14 km in the stratosphere. Satellite ultraviolet measurements (GOME, OMI) contain little vertical information for the small scale of ozone, especially in the upper troposphere (UT) and lower stratosphere (LS) where the sharp O3 gradient across the tropopause and large ozone variability are observed. Therefore, retrievals depend greatly on the a-priori knowledge in the UTLS

Bak, Juseon↗
DOE OSTI2026

BLOC Site - ASSIST Thermodynamic Retrievals TROPoe v0.18 / Derived Data

This dataset contains daily files with thermodynamic profiles retrieved with the optimal estimation physical retrieval TROPoe (Turner and Löhnert 2014; Turner and Blumberg 2019; Turner and Löhnert 2021). This is a post-processed dataset and recommended for use. The profiles are retrieved every 10 minutes from instantaneous radiances observed with an Atmospheric Sounder Spectrometer by Infrared Spectral Technology (ASSIST, Michaud-Belleau et al. 2025) operated by NOAA Physical Sciences Laboratory (PSL) on Block Island for WFIP3. The spectral bands used in the retrieval are in the wavenumber range from 612 - 905.4 cm-1 and are specified in Turner and Löhnert (2021). Additional input data in TROPoe are cloud base height from a collocated ceilometer operated by NOAA GML and temperature, water vapor mixing ratio, and pressure from a collocated surface tower operated by NOAA PSL. In addition to these temporally resolved input data, TROPoe requires an a priori dataset (prior) that provides mean climatological estimates of thermodynamic profiles and specifies how temperature and humidity covary with height as an input (for details see, e.g., Djalalova et al. 2022). The prior is a key component of the retrieval and provides a constraint on the ill-posed inversion problem. A monthly prior was computed from operational radiosonde launches at Upton, NY. The TROPoe docker container (version 0.18) is available from Docker Hub at https://hub.docker.com/r/davidturner53/tropoe/tags, and the source code code is available in the GitHub repository https://github.com/OAR-atmospheric-observations/TROPoe.

17 WIND ENERGY↗
DOE OSTI2026

NANT Site - ASSIST Thermodynamic Retrievals TROPoe v0.18 / Derived Data

This dataset contains daily files with thermodynamic profiles retrieved with the optimal estimation physical retrieval TROPoe (Turner and Löhnert 2014; Turner and Blumberg 2019; Turner and Löhnert 2021). This is a post-processed dataset and recommended for use. The profiles are retrieved every 10 minutes from instantaneous radiances observed with an Atmospheric Sounder Spectrometer by Infrared Spectral Technology (ASSIST, Michaud-Belleau et al. 2025) operated by NOAA Physical Sciences Laboratory (PSL) on Nantucket Island for WFIP3. The spectral bands used in the retrieval are in the wavenumber range from 612 - 905.4 cm-1 and are specified in Turner and Löhnert (2021). Additional input data in TROPoe are cloud base height from a collocated ceilometer operated by NOAA GML and temperature, water vapor mixing ratio, and pressure from a collocated surface tower operated by NOAA PSL. In addition to these temporally resolved input data, TROPoe requires an a priori dataset (prior) that provides mean climatological estimates of thermodynamic profiles and specifies how temperature and humidity covary with height as an input (for details see, e.g., Djalalova et al. 2022). The prior is a key component of the retrieval and provides a constraint on the ill-posed inversion problem. A monthly prior was computed from operational radiosonde launches at Upton, NY. The TROPoe docker container (version 0.18) is available from Docker Hub at https://hub.docker.com/r/davidturner53/tropoe/tags, and the source code code is available in the GitHub repository https://github.com/OAR-atmospheric-observations/TROPoe.

17 WIND ENERGY↗
DOE OSTI2024

Development of an Optical Library for Coevaporated CdSe x Te 1– x

The conversion efficiency of CdTe solar cells may be improved by bandgap engineering, i.e., changing the bandgap value through the addition of Se in the absorber. The Se alloying enables a short-circuit current density improvement, as it leads to a bandgap energy value decrease. Furthermore, it has been associated with increased minority carrier lifetimes, assuring high open-circuit voltage values. An Se gradient profile control can further optimize the solar cell performance. Thus, an optical model baseline of the CdSe x Te 1–x (CST) compound was developed. Spectroscopic ellipsometry measurements were conducted to accurately extract the optical constants of ten CST layers deposited through coevaporation with x varying from 0 to 1. Using the measured dielectric function spectra from the discrete CST layers with varying x, and considering the composition-induced shift in the critical point energies, an energy-shift model was employed to develop the accurate optical library for the CST compound for any x value to provide data for future modeling and optimization. Furthermore, the library accuracy was validated through optical simulations of the quantum efficiency of a graded CST solar cell using the finite-difference time-domain method by replicating the Se profile in the absorber layer measured through secondary ion mass spectrometry.

14 SOLAR ENERGY↗
DOE OSTI2021

Reconstructions from randomly generated longitudinal electron bunch profiles with Gaussian envelopes using the Gerchberg–Saxton algorithm

Knowledge of longitudinal electron bunch profiles is vital to optimize the performance of plasma wakefield accelerators and x-ray free electron laser linacs. Because of their importance to these novel applications, noninvasive frequency domain techniques are often employed to reconstruct longitudinal bunch profiles from coherent synchrotron, transition, or undulator radiation measurements. In this paper, we detail several common reconstruction techniques involving the Kramers–Kronig phase relationship and Gerchberg–Saxton algorithm. Additionally, through statistical analysis, we draw general conclusions about the accuracy of these reconstruction techniques and the most suitable candidate for reconstructing well-isolated longitudinal bunch profiles from spectroscopic data.

47 OTHER INSTRUMENTATION↗
DOE OSTI2020

Optimizing the hypre solver for manycore and GPU architectures

The solution of large-scale combustion problems with codes such as Uintah on modern computer architectures requires the use of multithreading and GPUs to achieve performance. Uintah uses a low-Mach number approximation that requires iteratively solving a large system of linear equations. The Hypre iterative solver has solved such systems in a scalable way for Uintah, but the use of OpenMP with Hypre leads to at least slowdown due to OpenMP overheads. The proposed solution uses the MPI Endpoints within Hypre, where each team of threads acts as a different MPI rank. This approach minimizes OpenMP synchronization overhead and performs as fast or (up to 1.44) faster than Hypre's MPI-only version, and allows the rest of Uintah to be optimized using OpenMP. The profiling of the GPU version of Hypre shows the bottleneck to be the launch overhead of thousands of micro-kernels. The GPU performance was improved by fusing these micro-kernels and was further optimized by using Cuda-aware MPI, resulting in an overall speedup of 1.16—1.44 compared to the baseline GPU implementation. The above optimization strategies were published in the International Conference on Computational Science 2020 [1]. This work extends the previously published research by carrying out the second phase of communication-centered optimizations in Hypre to improve its scalability on large-scale supercomputers. Additionally, this includes an efficient non-blocking inter-thread communication scheme, communication-reducing patch assignment, and expression of logical communication parallelism to a new version of the MPICH library that utilizes the underlying network parallelism [2]. The above optimizations avoid communication bottlenecks previously observed during strong scaling and improve performance by up to 2 on 256 nodes of Intel Knight's Landing processor.

97 MATHEMATICS AND COMPUTING↗