SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
JPL is developing a continuous hydrogen sorption cryocooler for the ESA Planck mission, which will measure the anisotropy in the cosmic microwave background.
Intermetallic metal hydrides are critical materials for hydrogen storage applications, however, metal hydrides with greater storage capacities are still needed. Within metal hydrides, the volumetric storage capacities are limited by the number of hydrogen-accommodating interstitial sites which can be simultaneously occupied given a minimum hydride nearest-neighbor distance of ~2.1 A, according to the Switendick-Westlake criterion. To date, violations of this criterion are rare. Perhaps the most well studied compounds violating this criterion are the RNiInHx compounds (R = Ce, La, Nd). Previous neutron diffraction studies on the deuterated species revealed the presence of Ni-D∙∙∙D-Ni-D∙∙∙D-Ni chains with anomalously close D∙∙∙D contacts of ~1.6 A. Yet there are no neutron vibrational spectroscopic investigations reported for these atypical hydrides. Here we use neutron vibrational spectroscopy (NVS) measurements to probe the hydrogen dynamics in LaNiInHx (x = 0.67, 1.6) and CeNiInH 1.4 . For x > 0.67, the presence of close H...H contacts yields two related features in the vibrational spectrum centered near ~90 meV corresponding to the oscillations of paired H atoms simultaneously occupying neighboring R 3 Ni tetrahedra. Notably, these features are energetically distinct from comparable vibrational motions for "unpaired" H atoms when x = 0.67. To compare, we also present powder neutron diffraction and NVS measurements for the newly characterized, chemically similar Sn compounds CeNiSnH, CeNiSnH 2 , and CeNiSnD 2 . These compounds also contain R 3 Ni tetrahedra, however, the H-occupied tetrahedra are well separated from each other with the closest H∙∙∙H distances exceeding 2.1 A, and the Switendick-Westlake criterion is not violated. Consequently, the spectral signature of the close H∙∙∙H contacts is absent in these hydrides.
For several future space applications, long life vibration free collers are needed to cover the temperature range from 60K to about 4K. We describe the development of a novel cryogenic system capable of reaching 18K in coupled resevoirs that provide distributed cooling with small temperature fluctuations.
Here, we derive a new expression for the strength of a hydrogen bond (V HB ) in terms of the elongation of the covalent bond of the donor fragment participating in the hydrogen bond (Δr HB ) and the intermolecular coordinates R (separation between the heavy atoms) and θ (deviation of the hydrogen bond from linearity). The expression includes components describing the covalent D–H bond of the hydrogen bond donor via a Morse potential, the Pauli repulsion, and electrostatic interactions between the constituent fragments using a linear expansion of their dipole moment and a quadratic expansion of their polarizability tensor. We fitted the parameters of the model using ab initio electronic structure results for six hydrogen bonded dimers, namely, NH 3 –NH 3 , H 2 O–H 2 O, HF–HF, H 2 O–NH 3 , HF–H 2 O, and HF–NH 3 , and validated its performance for extended parts of their potential energy surfaces, resulting in a mean absolute error ranging from 0.07 to 0.31 kcal/mol. The derived expression describes the energy–structure relationship in terms of a single structural parameter, namely, the elongation of the donor’s covalent bond (Δr HB ), and suggests the novel relationship of 8.0 kcal/mol pm −1 (or 0.8 kcal/mol per 0.001 Å elongation). This structural parameter is easily obtained from theory and can serve as the single descriptor of the strength of individual hydrogen bonds.
Slush hydrogen fluid characterization and instrumentation analysis
We report the discovery of one super-Earth- (TOI-1749b) and two sub-Neptune-sized planets (TOI-1749c and TOI-1749d) transiting an early M dwarf at a distance of 100 pc, which were first identified as planetary candidates using data from the TESS photometric survey. We have followed up this system from the ground by means of multiband transit photometry, adaptive optics imaging, and low-resolution spectroscopy, from which we have validated the planetary nature of the candidates. We find that TOI-1749b, c, and d have orbital periods of 2.39, 4.49, and 9.05 days, and radii of 1.4, 2.1, and 2.5 R {sub ⊕}, respectively. We also place 95% confidence upper limits on the masses of 57, 14, and 15 M {sub ⊕} for TOI-1749b, c, and d, respectively, from transit timing variations. The periods, sizes, and tentative masses of these planets are in line with a scenario in which all three planets initially had a hydrogen envelope on top of a rocky core, and only the envelope of the innermost planet has been stripped away by photoevaporation and/or core-powered mass-loss mechanisms. These planets are similar to other planetary trios found around M dwarfs, such as TOI-175b,c,d and TOI-270b,c,d, in the sense that the outer pair has a period ratio within 1% of 2. Such a characteristic orbital configuration, in which an additional planet is located interior to a near 2:1 period-ratio pair, is relatively rare around FGK dwarfs.
Explore the source record for details and available documents.
The existing natural gas pipeline system is being considered as a means to distribute blends of clean hydrogen and natural gas as one component of clean hydrogen’s role in enabling a future low-carbon energy system. With nearly three million miles of transmission and distribution lines in the United States, this national asset is uniquely situated as a transition strategy to assist in the decarbonization of the US economy. 1 This report reviews existing data on the effects of hydrogen on polyethylene (PE) natural gas pipeline materials and identifies gaps where additional investigation is required to fully assess deleterious impacts to the polyethylene pipes from exposure to hydrogen. This gap analysis will assist in determining the feasibility of blending hydrogen gas into existing natural gas pipelines.
Fuel cell electrolyte properties - solubility of hydrogen and oxygen in KOH and LiOH, diffusivity of oxygen and hydrogen in KOH, and density and vapor pressure of KOH and LiOH
Vapor phase deposition process forms a heavily doped n-region on a melt-grown p-type gallium antimonide substrate. HCl transports gallium to the reaction zone, where it combines with antimony hydride and the dopant carrier, hydrogen telluride. Temperatures as low as 400 degrees C are required.
Dead ended compartments concentration and current distributions calculation in space hydrogen-oxygen fuel cells, using mathematical model with convective diffusion equation
A process for preparing large diameter carbon-boron monofilament was developed. The process involves chemical vapor depositing a carbon-boron alloy monofilament from a BCl3, CH4, and H2 gas mixture onto a carbon substrate. Amorphous alloys were formed when gaseous mixtures containing greater than 20 percent methane (80 percent BCl3) were used. The longest uninterrupted lengths of carbon-boron monofilament were produced using a CH4/BCl3 gas ratio of 2.34. It was found that the properties of the carbon-boron alloy monofilament improved when the carbon substrate was precleaned in chlorine. The highest strength monofilament was attained when a CH4/BCl3 gas volume ratio of 0.44 was 28 million N/sq cm (40 million psi). While the highest strengths were attained in this run, the 0.44 gas ratio and other CH4/BCl3 ratios less than 2.34 would not yield long runs. Runs using these ratios were usually terminated because of a break in the monofilament within the reactor. It is felt better process control could probably be achieved by varying the amount of hydrogen; the BCl3/H2 ratio was kept constant in these studies.
Experimental demonstration of the possibility to gain access to sublayers of uncombined titanium through an inhibiting surface film in titanium bulk sublimator pumping by adding a thin layer of titanium to an apparently occluded surface. Though most of the work described was directed toward more effective utilization of titanium in bulk sublimation pumping for small positive-ion accelerators, the results presented should be of interest to others concerned with hydrogen pumping in general and the problems associated with inhibiting films.
Experimental results are reported for torsional fatigue specimens of high-strength steel 4370 and tensile bars of mild steel A-106 which present evidence of a hydrogen-induced strain-aided hardening effect. These results are consistent with the postulate that hydrogen suppresses ductile processes required for crack initiation at large plastic strains.
A two-dimensional, closed-form model originally developed by Batteh and Keefer (1974) is modified and applied to the absorption of laser radiation by a hydrogen plasma. The model is used to predict the power absorbed by plasmas at one- and ten-atmosphere pressure as a function of laser beam radius. Predicted isotherms are given for one- and ten-atmosphere plasmas, together with thermal loading of the absorption chamber wall. The model is also used in predicting the laser power required to sustain a hydrogen plasma as a function of the absorption coefficient.
We present measurements of the spallation cross sections of carbon, oxygen, and iron in helium and hydrogen, at beam energies from 540 to 1600 MeV/nucleon, performed by exposing liquid helium, CH2, and C targets. Charge changing cross sections are reported for fragments down to Ne for Fe + alpha and Fe + p reactions, and down to B for O + alpha, O + p, C + alpha, and C + p reactions. Alpha- to p-induced cross section ratios (sigma(sub alpha)/sigma(sub p)) are determined at the same energy per nucleon. From these measurements an empirical formula for the (sigma(sub alpha)/sigma(sub p)) ratios is derived and is found in good agreement with available isotopic cross sections data from radioactivity and radiochemical techniques. These results are applied to the propagation of heavy charged cosmic rays in an interstellar medium with a helium to hydrogen abundance ratio of 0.10. It is shown that the Sc-Mn/Fe ratio prediction is decreased relative to the B/C ratio when compared to propagation calculations in a pure hydrogen interstellar medium.
Supernova 1993J in the nearby galaxy M81 is one of the closest - and hence brightest - supernovae to be witnessed this century. The early spectrum of SN1993J showed the characteristic hydrogen signature of type II supernovae, but its subsequent evolution is atypical for this class of supernova. Here we present optical and infrared spectra of SN1993J up to 43 days after outburst, which reveal the onset of the helium absorption and emission features more commonly associated with hydrogen-free type Ib supernovae. Corresponding model spectra show that the progenitor star must have possessed an unusually thin (for type II supernovae) hydrogen-rich envelope overlying a helium-rich mantle. Moreover, the supernova ejecta must have remained compositionally stratified, with little transport of the hydrogen-rich material down into the underlying helium layer or mixing of heavier elements outwards. SN1993J therefore represents a transition object between hydrogen-dominated type II supernovae, and hydrogen-free, helium-dominated type Ib supernovae.
Control of impurities, fuel recycling and hydrogen content by lithium evaporative coatings and real-time lithium powder injection (LPI) in EAST are studied for high performance H-mode discharges of up to ~100 s. The results show that the lithium evaporative coatings significantly reduced both the low-Z impurity carbon and high-Z impurity tungsten as well as molybdenum concentration in the plasmas, and the impurities concentration significantly reduced with the accumulated lithium coatings and maintained well afterwards. Specifically the high-Z tungsten core impurity concentration was maintained between 3 ppm–15 ppm during the 101 s H-mode discharge, which is acceptable for the long pulse operation. In addition, real-time wall conditioning via LPI successfully reduced the core high-Z metal impurities by 50% during ~35 s long pulse H-mode discharge, exhibiting strong compatibility between real-time LPI with long pulse discharges. In addition, evaporative lithium coatings demonstrated fuel recycling control, with fuel recycling obviously reducing with lithium coatings and maintaining well afterwards. Also, the lithium evaporative coatings reduced the hydrogen minority species content, represented by the density ratio H/(H + D), from ~50% down to ~5% with accumulated lithium coatings; low hydrogen fraction improved the ICRF minority heating efficiency. Finally the real-time LPI reduced the recycling coefficient R global from 0.95 to 0.82. With these wall conditionings help, the plasma density controlled well during the 101 s long pulse H-mode discharge. Furthermore, these results provide valuable references on impurities, fuel recycling and hydrogen content control for future longer pulse high performance H-mode operation (≥400 s) in EAST and future fusion devices.