Search NASA⌕ Search

SEARCH · Search NASA

Results for “ion correlations”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14

L -Value and Energy Dependence of 0.1–50 keV O + , He + , and H + Ions for CME and CIR Storms Over the Entire Van Allen Probes Era

Our studies report the first observation of L -value and energy sorted correlation of differential fluxes of 0.1–50 keV O + , He + , and H + ions with different geophysical parameters for 29 Coronal Mass Ejected (CME) and 40 Corotating Interaction Region (CIR)-driven geomagnetic storms during the entire Van Allen Probes era. For both solar wind drivers, ions with ≥1 keV energies show more variability in response to the solar wind changes, while the lower energy (<1 keV) ions are relatively stable. During the in-storm interval, O + ions show maximum flux enhancement and become further prominent during CME storms. O + ion (≥10 keV) fluxes show good correlation with – $V_{sw}B_z$, and Sym-H index during CME-driven storms in the L ~2.5–5.5. Apart from this, the average duration of persistence ($\langleΔt\rangle$) for enhanced fluxes is higher for CIR-driven storms with $\langleΔt\rangle_{O^+}>\langleΔt\rangle_{He^+}>\langleΔt\rangle_{H^+}$ at E ≤ 50 keV in the L ~2.5–5.5. Moreover, the observed value of $\langleΔt\rangle_i$ (where $\textit{i}$ is O + , H + or He + ) increases with the increasing L . Further, we discuss the plausible mechanisms to provide a comprehensive overview of L -values and energy sorted O + , He + and H + ion dynamics for two different categories of solar wind drivers.

79 ASTRONOMY AND ASTROPHYSICS↗

Entropy-Tailored Fast-Charging Sodium Layered Cathodes

O3-type layered transition metal (TM) oxides are widely used as cathode materials for Na-ion batteries due to their high energy density potential, enabled by the state of charge (SoC)-dependent transition from octahedral (O-type) to prismatic (P-type) structures during Na-ion (de)sodiation. However, the O–P transition is often criticized for compromising the Na-ion mobility and limiting the cycle life. Herein, we reveal the intrinsic correlation between O–P transitions, oxygen behaviors, and Na-ion kinetics. We demonstrate that a compositionally versatile, entropy-tailored approach can promote preferred transitions (characterized by large lattice parameter deviations in the O-type region and rapid O–P biphasic reactions), enhancing Na-ion migration, as revealed by in situ high-energy synchrotron X-ray diffraction (HEXRD). Additionally, irreversible oxygen loss at high SoC is effectively mitigated, while TM migration and surface reconstruction are greatly suppressed, further accelerating Na-ion transport and stabilizing the structure, as confirmed by X-ray absorption spectroscopy (XAS) and theoretical analyses. The result is an exceptionally high rate capability of 88.7 mAh g –1 at 20 C (2.4 A g –1 ) with a superior normalized retention of 72.6%, accompanied by a prolonged lifetime with 74.3% retention after 1000 cycles. In conclusion, this work advances the understanding of the chemistry–property relationships in O3-type layered cathodes and broadens the prospects for fabricating high-power-density electrodes.

36 MATERIALS SCIENCE↗

Why halides enhance heterogeneous metal ion charge transfer reactions

Halide-induced rate enhancements are correlated with the desorption barriers of aqueous metal–anion complexes on electrodes, which can guide electrode and electrolyte selection to enhance redox kinetics of metal ion charge transfer reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Correlative analysis of structure and chemistry of Li x FePO 4 platelets using 4D-STEM and X-ray ptychography

Lithium iron phosphate (Li x FePO 4 ), a cathode material used in rechargeable Li-ion batteries, phase separates upon de/lithiation under equilibrium. The interfacial structure and chemistry within these cathode materials affects Li-ion transport, and therefore battery performance. Here, correlative imaging of Li x FePO 4 was performed using four-dimensional scanning transmission electron microscopy (4D-STEM), scanning transmission X-ray microscopy (STXM), and X-ray ptychography in order to analyze the local structure and chemistry of the same particle set. Over 50,000 diffraction patterns from 10 particles provided measurements of both structure and chemistry at a nanoscale spatial resolution (16.6–49.5 nm) over wide (several micron) fields-of-view with statistical robustness. Li x FePO 4 particles at varying stages of delithiation were measured to examine the evolution of structure and chemistry as a function of delithiation. In lithiated and delithiated particles, local variations were observed in the degree of lithiation even while local lattice structures remained comparatively constant, and calculation of linear coefficients of chemical expansion suggest pinning of the lattice structures in these populations. Partially delithiated particles displayed broadly core–shell-like structures, however, with highly variable behavior both locally and per individual particle that exhibited distinctive intermediate regions at the interface between phases, and pockets within the lithiated core that correspond to FePO 4 in structure and chemistry. The results provide insight into the Li x FePO 4 system, subtleties in the scope and applicability of Vegard’s law (linear lattice parameter-composition behavior) under local versus global measurements, and demonstrate a powerful new combination of experimental and analytical modalities for bridging the crucial gap between local and statistical characterization.

25 ENERGY STORAGE↗

Carbon-Binder Weight Loading Optimization for Improved Lithium-Ion Battery Rate Capability

Battery performance is strongly correlated with electrode microstructure and weight loading of the electrode components. Among them are the carbon-black and binder additives that enhance effective conductivity and provide mechanical integrity. However, these both reduce effective ionic transport in the electrolyte phase and reduce energy density. Therefore, an optimal additive loading is required to maximize performance, especially for fast charging where ionic transport is essential. Such optimization analysis is however challenging due to the nanoscale imaging limitations that prevent characterizing this additive phase and thus quantifying its impact on performance. Herein, an additive-phase generation algorithm has been developed to remedy this limitation and identify percolation threshold used to define a minimal additive loading. Improved ionic transport coefficients from reducing additive loading has been then quantified through homogenization calculation, macroscale model fitting, and experimental symmetric cell measurement, with good agreement between the methods. Rate capability test demonstrates capacity improvement at fast charge at the beginning of life, from 37% to 55%, respectively for high and low additive loading during 6C CC charging, in agreement with macroscale model, and attributed to a combination of lower cathode impedance, reduced electrode tortuosity and cathode thickness.

25 ENERGY STORAGE↗

Enabling fast charging of lithium-ion batteries through secondary- /dual- pore network: Part I - Analytical diffusion model

Battery performance is strongly correlated with electrode microstructural properties. Enabling fast charging of lithium-ion batteries requires improved through-plane ionic diffusion that can be achieved through, among other strategies, structured electrodes with a secondary- or dual-pore network (SPN). In this work, an analytical model investigates the impact of such an SPN on ionic diffusion with a composite electrode, considering various pore-channel geometries and comparing to standard electrodes with identical gravimetric- and volumetric-specific theoretical capacities. Relevant SPN design parameters and tortuosity coefficients are identified according to three optimization objectives that aim to balance the improved overall through-plane diffusion, thanks to the coarse aligned channels, and degraded in-plane diffusion because of the porous matrix densification required to maintain gravimetric- and volumetric-specific theoretical capacities. The model indicates that a relatively low amount of SPN is required and that electrodes with high through-plane tortuosity and low in-plane tortuosity benefit most from such architecture.

25 ENERGY STORAGE↗

Advancing Li-plating detection: Motivating a multi-signal correlation approach

Facilitating fast charging in lithium-ion batteries (LiBs) is often linked to Li-plating, which harms performance, longevity, and safety. Early detection of Li-plating is essential for rapid technological development and for preventing performance deterioration and ensuring safety during operation. Fast and real-time detection, using commonly collected measurements like voltage (V), current (I), temperature (T), and pressure (P), is highly desirable. Existing standalone methods relying on electrochemical and mechanical signatures, using half, smaller, or specially designed cells often operated at lower temperatures, fail to account for real-world fast-charging conditions. These signatures may also have inherent unreliability in aged LiBs, a phenomenon currently not-well understood. All these uncertainties have complicated practical implementation of a robust Li-plating detection technique. This study, through multiple case studies involving real-world fast-charging conditions using automotive-grade 11.6 Ah LiBs, shows that many single signal-based diagnostic techniques may be inadequate to detect Li-plating. Among various signatures, end-of-charge rest pressure, differential pressure-sensing, and end-of-charge rest voltage were identified as particularly useful in detecting Li-plating. Furthermore, A multi-signal-based detection technique is shown to be more robust in detecting Li-plating. Using both fresh and aged cells, the results and analysis highlight how detection capabilities are influenced by various factors, including battery design, size, charging speed, operating temperature, and degradation level. Adopting such a multi-signal Li-plating detection approach may be instrumental in the rapid development of battery technology in laboratories, as well as ensuring the enhanced safety of next-generation LiBs in real-world fast-charging applications.

25 ENERGY STORAGE↗

Machine learning reveals key ion selectivity mechanisms in polymeric membranes with subnanometer pores

Designing single-species selective membranes for high-precision separations requires a fundamental understanding of the molecular interactions governing solute transport. Here, we comprehensively assess molecular-level features that influence the separation of 18 different anions by nanoporous cellulose acetate membranes. Our analysis identifies the limitations of bulk solvation characteristics to explain ion transport, highlighted by the poor correlation between hydration energy and the measured permselectivity (R 2 = 0.37). Entropy-enthalpy compensation, spanning 40 kilojoules per mole, leads to a free-energy barrier (ΔG‡) variation of only ~8 kilojoules per mole across all anions. We apply machine learning to elucidate descriptors for energetic barriers from a set of 126 collected features. Notably, electrostatic features account for 75% of the overall features used to describe ΔG‡, despite the relatively uncharged state of cellulose acetate. Our work presents an approach for studying ion transport across nanoporous membranes that could enable the design of ion-selective membranes.

36 MATERIALS SCIENCE↗

Structural Distortion Induced by Manganese Activation in a Lithium-Rich Layered Cathode

The search for batteries with high energy density has highlighted lithium-rich manganese-based layered oxides due to their exceptionally high capacity. Although it is clear that both cationic and anionic redox are present in the charge compensation mechanism, the microstructural evolution of the Li 2 MnO 3 -like phase during anionic redox and its role in battery performance and structural stability are still not fully understood. Here, we systematically probe microstructural evolution using spatially resolved synchrotron X-ray measurements and reveal an underlying interaction between the Li 2 MnO 3 -like domains and bulk rhombohedral structure. Mn ion activation and a previously unobserved structural distortion are discovered at high voltages, and can be related to structural strain present in the Li 2 MnO 3 -like phase upon substantial lithium ion extraction. Moreover, we elucidate a correlation between this structural distortion and irreversible phase transitions by thermally perturbing delithiated samples. These insights highlight a pathway toward achieving high capacity cathode materials required for future commercial applications.

36 MATERIALS SCIENCE↗

Probing Operando Electrochemical Strain Generation in α-NaFeO 2 Composite Cathodes during Cycling of Na-Ion Batteries

The transition metal oxide (TMO) cathodes in Na-ion batteries suffer from low-capacity retention. Chemo-mechanical instabilities lead to the deterioration of the electrochemical performance of TMO cathodes in Li-ion batteries. However, there is not much known about the chemo-mechanical instabilities in the TMO cathodes for Na-ion batteries. Understanding the governing forces behind the interplay between the electrochemical performance and mechanical stability in TMO cathodes is critical for the development of Na-ion batteries. Here, we synchronize the digital image correlation (DIC) technique with electrochemical analysis to capture the real-time deformation behavior of the α-NaFeO 2 cathodes during cycling. When the charge cutoff voltage is 3.6 V, the cathode experiences reversible deformations (except for the first cycle). There is negative strain (shrinkage) generation during Na extraction and positive strain (expansion) generation during the subsequent Na insertion. A detailed analysis of the potential-dependent strain rate evolution points out complicated phase transformations and nonequilibrium conditions in the α-NaFeO 2 cathodes during cycling. When the charge cutoff voltage was increased to 4.2 V, there was a rapid capacity loss and large plastic deformations in the α-NaFeO 2 cathodes. We provide an in-depth discussion about the possible mechanisms behind the chemo-mechanical instabilities in the α-NaFeO 2 . In conclusion, the correlation is critical to develop material-based strategies to mitigate instability mechanisms in TMO cathodes for Na-ion batteries.

Wable, Minal [University of Maryland Baltimore Cou↗

Nanoscale friction of CVD single-layer MoS 2 with controlled defect formation

Two-dimensional (2D) layered nanomaterials such as graphene, molybdenum disulfide (MoS 2 ), or tungsten disulfide offer a promising solution in areas of solid-state lubrication, due to their excellent mechanical properties as well as low friction. However, defects can influence their friction and reduce their superior tribological properties. Thus, it is crucial to understand the effects of defects on sliding behavior in 2D nanomaterials, to foster a functional strategy for utilizing 2D nanomaterials as solid-state tribological films. In this study, frictional effects of defects, grain boundaries, and atomic-scale structural defects were explored on chemical vapor deposition (CVD) grown single layer MoS 2 . Selective patterning of defects into MoS 2 was accomplished via controlled irradiation of helium ions with varying ion doses. The friction of MoS 2 was characterized by friction force microscopy (FFM) and was found that friction depends on the defect formation controlled by helium ion irradiation. This approach offers a correlation between surface topography, defects and friction. Understanding the relative friction of MoS 2 in the presence of different levels of defects is foundational to studying tribological properties of a single layer MoS 2 at both nanoscales and macroscales.

36 MATERIALS SCIENCE↗

Dynamics of Hydroxyl Anions Promotes Lithium Ion Conduction in Antiperovskite Li 2 OHCl

Li 2 OHCl is an exemplar of the antiperovskite family of ionic conductors, for which high ionic conductivities have been reported, but in which the atomic-level mechanism of ion migration is unclear. The stable phase is both crystallographically defective and disordered, having similar to 1/3 of the Li sites vacant, while the presence of the OH(- )anion introduces the possibility of rotational disorder that may be coupled to cation migration. In this work, complementary experimental and computational methods are applied to understand the relationship between the crystal chemistry and ionic conductivity in Li 2 OHCl , which undergoes an orthorhombic to cubic phase transition near 311 K (approximate to 38 degrees C) and coincides with the more than a factor of 10 change in ionic conductivity (from 1.2 x 10 -5 mS/cm at 37 degrees C to 1.4 x 10 -3 mS/cm at 39 degrees C). X ray and neutron experiments conducted over the temperature range 20-200 degrees C, including diffraction, quasi-elastic neutron scattering (QENS), the maximum entropy method (MEM) analysis, and ab initio molecular dynamics (AIMD) simulations, together show conclusively that the high lithium ion conductivity of cubic Li2OHCl is correlated to "paddlewheel" rotation of the dynamic OH - anion. The present results suggest that in antiperovskites and derivative structures a high cation vacancy concentration combined with the presence of disordered molecular anions can lead to high cation mobility.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Measurement of D 0 -meson + hadron two-dimensional angular correlations in Au + Au collisions at s N N = 200 GeV

Open heavy flavor hadrons provide unique probes of the medium produced in ultra-relativistic heavy-ion collisions. Due to their increased mass relative to light-flavor hadrons, long lifetime, and early production in hard-scattering interactions, they provide access to the full evolution of the partonic medium formed in heavy-ion collisions. This paper reports two-dimensional (2D) angular correlations between neutral D-mesons and unidentified charged particles produced in minimum-bias Au+Au collisions at s N N = 200 GeV. D 0 and D 0 ¯ mesons are reconstructed via their weak decay to K ∓ π ± using the Heavy Flavor Tracker (HFT) in the Solenoidal Tracker at RHIC (STAR) experiment. Correlations on relative pseudorapidity and azimuth (Δη,ΔΦ) are presented for peripheral, mid-central and central collisions with D 0 transverse momentum from 2 to 10 GeV/c. Attention is focused on the 2D peaked correlation structure near the triggered D 0 -meson, the {\em near-side} (NS) peak, which serves as a proxy for a charm-quark containing jet. The correlated NS yield of charged particles per D 0 -meson and the 2D widths of the NS peak increase significantly from peripheral to central collisions. These results are compared with similar correlations using unidentified charged particles, consisting primarily of light-flavor hadrons, at similar trigger particle momenta. Similar per-trigger yields and widths of the NS correlation peak are observed. Here, the present results provide additional evidence that D 0 -mesons undergo significant interactions with the medium formed in heavy-ion collision and show, for the first time, significant centrality evolution of the NS 2D peak in the correlations of particles associated with a heavy-flavor hadron produced in these collisions.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Elucidating the Link Between Alkali Metal Ions and Reaction-Transport Mechanisms in Cathode Electrodes for Alkali-ion Batteries

Our long-term goal is to improve the reliability of electrode materials and their ability to transport and store various metal ions for electrochemical energy storage applications. The main objective of this work was to investigate the intrinsic relationship between the role of alkali metal ions and electrochemically driven mechanical stability and kinetic properties of battery materials. The overall question was “What is the role of alkali metal ions on the electrochemical and mechanical behavior of cathode electrodes? Our guiding hypothesis was that intercalation of larger alkali metal ions (Na and K) inevitably alters the coupled transport-reaction processes during battery operation in organic electrolytes, leading to more intensive chemo-mechanical instabilities in cathode electrodes, resulting in rapid capacity fade. To validate the hypothesis, we experimentally characterized the reaction-transport processes and governing forces driving the instability of electrode materials in different alkali metal-ion environments. The project had three main tasks. The first one was to investigate intercalation-induced strains and associated stress generation, and their impact on structural deformations in composite cathode electrodes. The second task focused on identifying potential-dependent dynamic changes in the electrode-electrolyte interface in alkali metal ion batteries. The last task was focused on determining how larger alkali metal ions with slower diffusivity affect the transport-mechanics coupling at faster scan rates, compared to smaller ions with faster diffusivity in electrodes. We shortly provided the outcome of each task in the accomplishment section. This project produced 10 peer-reviewed publications (9 research papers and one review manuscript) and supported two Ph.D. students, who graduated from Oklahoma State University.

25 ENERGY STORAGE↗

The TAMUTRAP facility: A Penning trap facility at Texas A&M University for weak interaction studies

The Texas A&M University Penning Trap (TAMUTRAP) facility aims to test the standard model of the electroweak interaction by measuring the β-ν correlation parameter, a βν , for β-delayed proton emitters in the atomic mass range 20 < A < 40. Precision measurements of this correlation parameter and, inextricably, the Fierz interference parameter, are a sensitive probe of physics beyond the standard model. Here, using off-line ion sources, the TAMUTRAP facility has been commissioned by demonstrating the ability to manipulate the trapped-ion motions as well as to perform precision mass measurements. Our novel cylindrical Penning trap – the world's largest – differs from typical designs in two key aspects: the electrode structure has an 180-mm inner diameter and an overall length of 334.89 mm leading to a uniquely small length/radius ratio l/r = 3.72; and we do not use the long end cap approximation, instead our short endcap electrodes are closed and capable of being placed at an arbitrary potential. This geometry is optimized for observing β-delayed proton decays, but is also well suited for other in-trap and post-trap precision decay experiments. In addition to presenting an overview of the TAMUTRAP facility, we demonstrate that our unique Penning trap is able to measure masses with a precision similar to typical trap designs.

47 OTHER INSTRUMENTATION↗

Nanoscale dynamics during self-organized ion beam patterning of Si. I. Ar + bombardment

X-ray photon correlation spectroscopy (XPCS) is used to investigate the fluctuation dynamics during self- organized nanopatterning of silicon by Ar + bombardment at 65° polar angle. Rich structure is observed in the development of the correlation dynamics as seen in the evolving correlation time τ(q || ) and fluctuation relaxation exponent n(q || ). Furthermore, on length scales of the ripple structure, local structure becomes ever more long lived as coarsening progresses. In addition, τ (q || ) develops a peak on length scales corresponding to the ripple wavelength. As patterning progresses, correlation times become asymmetric between the positive and negative directions, suggesting the possibility of different dynamics on the slopes facing toward and away from the ion beam. Relaxation exponents show evolution from linear dynamics at early times to compressed exponential relaxation at low wave numbers and stretched exponential relaxation at high wave numbers. Compressed exponential behavior is reminiscent of stress relaxation processes observed in glasses.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Possible octupole deformation of 208 Pb and the ultracentral v 2 to v 3 puzzle

Recent measurements have established the sensitivity of ultracentral heavy-ion collisions to the deformation parameters of nonspherical nuclei. In the case of 129 Xe collisions, a quadrupole deformation of the nuclear profile led to an enhancement of elliptic flow in the most central collisions. In 208 Pb collisions a discrepancy exists in similar centralities, where either elliptic flow is overpredicted or triangular flow is underpredicted by hydrodynamic models; this is known as the v 2 -to-v 3 puzzle in ultracentral collisions. Motivated by low-energy nuclear structure calculations, we consider the possibility that 208Pb nuclei could have a pear-shape deformation (octupole), which has the effect of increasing triangular flow in central PbPb collisions. Using the recent data from ALICE and ATLAS, we reexamine the v 2 -to-v 3 puzzle in ultracentral collisions, including new constraints from recent measurements of the triangular cumulant ratio v 3 {4}/v 3 {2} and comparing two different hydrodynamic models. We find that while an octupole deformation would slightly improve the ratio between v 2 and v 3 , it is at the expense of a significantly worse triangular flow cumulant ratio. In fact, the latter observable prefers no octupole deformation, with β 3 ≲ 0.0375 for 208 Pb, and is therefore consistent with the expectation for a doubly-magic nucleus even at top collider energies. Furthermore, the v 2 -to-v 3 puzzle remains a challenge for hydrodynamic models.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Anisotropic flow and flow fluctuations of identified hadrons in Pb–Pb collisions at $ \sqrt{s_{\textrm{NN}}}$ = 5.02 TeV

The first measurements of elliptic flow of π ± , K ± , p+$\bar{p}$, K$_{S}^{0}$, Λ+$\bar{Λ}$, $\phi$, Ξ – +$\barΞ$ + , and Ω – +$\barΩ$ + using multiparticle cumulants in Pb–Pb collisions at $\sqrt{s_{NN}}$= 5.02 TeV are resented. Results obtained with two- (v 2 {2}) and four-particle cumulants (v 2 {4}) are shown as a function of transverse momentum, p T , for various collision centrality intervals. Combining the data for both v 2 {2} and v 2 {4} also allows us to report the first measurements of the mean elliptic flow, elliptic flow fluctuations, and relative elliptic flow fluctuations for various hadron species. These observables probe the event-by-event eccentricity fluctuations in the initial state and the contributions from the dynamic evolution of the expanding quark–gluon plasma. The characteristic features observed in previous p T -differential anisotropic flow measurements for identified hadrons with two-particle correlations, namely the mass ordering at low p T and the approximate scaling with the number of constituent quarks at intermediate p T , are similarly present in the four-particle correlations and the combinations of v 2 {2} and v 2 {4}. In addition, a particle species dependence of flow fluctuations is observed that could indicate a significant contribution from final state hadronic interactions. The comparison between experimental measurements and CoLBT model calculations, which combine the various physics processes of hydrodynamics, quark coalescence, and jet fragmentation, illustrates their importance over a wide p T range.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗