Search NASA⌕ Search

SEARCH · Search NASA

Results for “planetary data systems”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14
All sourcesNASA NTRSDOE OSTI
NASA NTRS1991

Goldstone solar system radar

This task provides for the planning, experiment design, and coordination of the data acquisition and engineering activities in support of all Goldstone planetary radar astronomy. Activities related to up-grades of the receiver systems, transmitter systems, and data processing support systems are currently intense. Also, the hardware and software maintenance of the data processing facility used by many of the Goldstone Solar System Radar investigators are covered.

Jurgens, Raymond F.↗
NASA NTRS2022

A Detailed Analysis of the Gl 486 Planetary System

Context . The Gl 486 system consists of a very nearby, relatively bright, weakly active M3.5V star at just 8 pc with a warm transiting rocky planet of about 1.3 R ⨁ and 3.0 M ⨁ . It is ideal for both transmission and emission spectroscopy and for testing interior models of telluric planets. Aims . To prepare for future studies, we aim to thoroughly characterise the planetary system with new accurate and precise data collected with state-of-the-art photometers from space and spectrometers and interferometers from the ground. Methods . We collected light curves of seven new transits observed with the CHEOPS space mission and new radial velocities obtained with MAROON-X at the 8.1m Gemini North telescope and CARMENES at the 3.5m Calar Alto telescope, together with previously published spectroscopic and photometric data from the two spectrographs and TESS. We also performed near-infrared interferometric observations with the CHARA Array and new photometric monitoring with a suite of smaller telescopes (AstroLAB, LCOGT, OSN, TJO). This extraordinary and rich data set was the input for our comprehensive analysis. Results . From interferometry, we measure a limb-darkened disc angular size of the star Gl 486 at θ LDD = 0.390 ± 0.018 mas. Together with a corrected Gaia EDR3 parallax, we obtain a stellar radius R * = 0.339 ± 0.015 R ⨀ . We also measure a stellar rotation period at P rot = 49.9 ± 5.5 days, an upper limit to its XUV (5–920 Å) flux informed by new Hubble/STIS data, and, for the first time, a variety of element abundances (Fe, Mg, Si, V, Sr, Zr, Rb) and C/O ratio. Moreover, we imposed restrictive constraints on the presence of additional components, either stellar or sub-stellar, in the system. With the input stellar parameters and the radial-velocity and transit data, we determine the radius and mass of the planet Gl 486 b at R p = 1.343 +0.063 -0.062 R ⨀ and M p = 3.00 +0.13 -0.13 M ⨁ , with relative uncertainties of the planet radius and mass of 4.7% and 4.2%, respectively. From the planet parameters and the stellar element abundances, we infer the most probable models of planet internal structure and composition, which are consistent with a relatively small metallic core with respect to the Earth, a deep silicate mantle, and a thin volatile upper layer. With all these ingredients, we outline prospects for Gl 486 b atmospheric studies, especially with forthcoming James Webb Space Telescope (Webb) observations.

Planetary systems↗
NASA NTRS2018

The Planetary Materials Database

NASA provides funds for a variety of research programs whose principal focus is to collect and analyze terrestrial analog materials. These data are used to (1) understand and interpret planetary geology; (2) identify and characterize habitable environments and pre-biotic/biotic processes; (3) interpret returned data from present and past missions; and (4) evaluate future mission and instrument concepts prior to selection for flight. Data management plans are now required for these programs, but the collected data are still not generally available to the community. There is also little possibility to re-analyze the collected materials by other techniques, since there is no requirement to archive collected samples. The Planetary Materials Database (PMD) is a central, high-quality, long-term data repository, which aims to promote the field of astrobiology and increase scientific returns from NASA funded research by enabling data sharing, collaboration and exposure of non-NASA scientists to NASA research initiatives and missions. The PMD is a linked collection of databases developed using the Open Data Repository (ODR) system. The PMD will include detailed descriptions of terrestrial analog planetary materials as well as data from the instruments used in their analysis. The goal is to provide example patterns/spectra/analyses, etc. and background information suitable for use by the Space Science community. An early example showing the utility of these databases (although not in the ODR format) is the RRUFF mineral database. RRUFF, comprising 4,000+ pure mineral standards, is the most popular and widely used dataset of minerals and receives more than 180,000 queries per week from geologists and mineralogists worldwide. The PMD will be patterned after the CheMin database [3], a resource that contains all of the data collected by the MSL CheMin XRD instrument on Mars. Raw and processed CheMin data can be viewed, downloaded, reprocessed and reanalyzed using cloud-based “applications” linked to the data.

Blake, David↗
DOE OSTI2021

Self-calibrating the look-elsewhere effect: fast evaluation of the statistical significance using peak heights

In experiments where one searches a large parameter space for an anomaly, one often finds many spurious noise-induced peaks in the likelihood. This is known as the look-elsewhere effect, and must be corrected for when performing statistical analysis. Here, this paper introduces a method to calibrate the false alarm probability (FAP), or p-value, for a given dataset by considering the heights of the highest peaks in the likelihood. Specifically, we derive an equation relating the global p-value to the rank and height of local maxima. In the simplest form of self-calibration, the look-elsewhere-corrected $\chi^2$ of a physical peak is approximated by the $\chi^2$ of the peak minus the $\chi^2$ of the highest noise-induced peak, with accuracy improved by considering lower peaks. In contrast to alternative methods, this approach has negligible computational cost as peaks in the likelihood are a byproduct of every peak-search analysis. We apply to examples from astronomy, including planet detection, periodograms, and cosmology.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRS2004

Human Support Technology Research, Development and Demonstration

The Human Support Technology research, development, and demonstration program address es the following areas at TRL: Advanced Power and Propulsion. Cryogenic fluid management. Closed-loop life support and Habitability. Extravehicular activity systems. Scientific data collection and analysis. and Planetary in-situ resource utilization.

Joshi, Jitendra↗
NASA NTRS2005

Science Alert Demonstration with a Rover Traverse Science Data Analysis System

The Onboard Autonomous Science Investigation System (OASIS) evaluates geologic data gathered by a planetary rover. This analysis is used to prioritize the data for transmission, so that the data with the highest science value is transmitted to Earth. In addition, the onboard analysis results are used to identify science opportunities. A planning and scheduling component of the system enables the rover to take advantage of the identified science opportunity. OASIS is a NASA-funded research project that is currently being tested on the FIDO rover at JPL for the use on future missions.

Castano, R.↗
NASA NTRS2017

The Use of MERRA-2 Near Surface Meteorology to Understand the Behavior of Planetary Boundary Layer Heights Derived from Wind Profiler Data over the US Great Plains

The atmospheric general circulation model (GCM) that underlies the MERRA-2 reanalysis includes a suite of physical parameterizations that describe the processes that occur in the planetary boundary layer (PBL). The data assimilation system assures that the atmospheric state variables used as input to these parameterizations are constrained to the best fit to all of the available observations. Many studies, however, have shown that the GCM-based estimates of MERRA-2 PBL heights are biased high, and so are not reliable for application related to constituent transport or the carbon cycle. A new 20-year record of PBL heights was derived from Wind Profiler (WP) backscatter data measured at a wide network of stations throughout the US Great Plains and has been validated against independent estimates. The behavior of these PBL heights shows geographical and temporal variations that are difficult to attribute to particular physical processes without additional information that are not part of the observational record. In the present study, we use information on physical processes from MERRA-2 to understand the behavior of the WP derived PBL heights. The behavior of the annual cycle of both MERRA-2 and WP PBL heights shows three classes of behavior: (i) canonical, where the annual cycle follows the annual cycle of the sun, (ii) delayed, where the PBL height reaches its annual maximum after the annual maximum of the solar insolation, and (iii) double maxima, where the PBL height begins to rise with the solar insolation but falls sometimes during the summer and then rises again. Although the magnitude of these types of variations is described by the WP PBL record, the explanation for these behaviors and the relationship to local precipitation, temperature, hydrology and sensible and latent heat fluxes is articulated using information from MERRA-2.

MERRA↗
NASA NTRS2018

The Use of MERRA-2 Near Surface Meteorology to Understand the Behavior of Planetary Boundary Layer Heights Derived from Wind Profiler Data over the US Great Plains

The atmospheric general circulation model (GCM) that underlies the MERRA-2 reanalysis includes a suite of physical parameterizations that describe the processes that occur in the planetary boundary layer (PBL). The data assimilation system assures that the atmospheric state variables used as input to these parameterizations are constrained to the best fit to all of the available observations. Many studies, however, have shown that the GCM-based estimates of MERRA-2 PBL heights are biased high, and so are not reliable for boundary layer studies.A 20-year record of PBL heights was derived from Wind Profiler (WP) backscatter data measured at a wide network of stations throughout the US Great Plains and has been validated against independent estimates. The behavior of these PBL heights shows geographical and temporal variations that are difficult to attribute to particular physical processes without additional information that are not part of the observational record.In the present study, we use information on physical processes from MERRA-2 to understand the behavior of the WP derived PBL heights. The behavior of the annual cycle of both MERRA-2 and WP PBL heights shows four classes of behavior: (i) canonical, characterized by a monthly progression in PBL height that follows the solar insolation, (ii) double peak, characterized by canonical behavior that is interrupted by a minimum in July, (iii) late peak, characterized by a suppressed heights in May and June, and return to canonical in July and August, and (iv) early peak where the PBL height rises with solar insolation but is suppressed later in the summer. The explanation for these behaviors and the relationship to local precipitation, temperature, sensible and latent heat fluxes, net radiation and aerosol load is articulated using information from MERRA-2.

Salmun, Haydee↗
NASA NTRS2001

Communication System Architecture for Planetary Exploration

Future human missions to Mars will require effective communications supporting exploration activities and scientific field data collection. Constraints on cost, size, weight and power consumption for all communications equipment make optimization of these systems very important. These information and communication systems connect people and systems together into coherent teams performing the difficult and hazardous tasks inherent in planetary exploration. The communication network supporting vehicle telemetry data, mission operations, and scientific collaboration must have excellent reliability, and flexibility.

Braham, Stephen P.↗
NASA NTRS2003

Solar System Test of Gravitational Theories

We are engaged in testing gravitational theory, mainly using observations of objects in the solar system and mainly on the interplanetary scale. Our goal is either to detect departures from the standard model (general relativity) - if any exist within the level of sensitivity of our data - or to place tighter bounds on such departures. For this project, we have analyzed a combination of observational data with our model of the solar system, including primarily planetary radar ranging, lunar laser ranging, and spacecraft tracking, but also including both pulsar timing and pulsar VLBI measurements. In the past year, we have included new data in the analysis, primarily tracking data from the Mars Pathfinder mission. Although these data are relatively few in number, they extend the time span of high-precision tracking on the surface of Mars from six years to over 20. As a result, the statistical standard deviation of our estimate of Mars precession rate has nearly halved, and the rest of the parameters in our solar-system model have experienced a corresponding, albeit smaller, improvement (about 20% for t,he relevant asteroid masses, 10% for the semimajor axis of Mars orbit, and smaller amounts for most other parameters). In the coming year, we plan to continue adding data to our set, as available. Ne 2 expect to use these data and improved models to obtain estimates of the gravitational- theory parameters and to publish these results.

Shapiro, Irwin I.↗
NASA NTRS1984

Goldstone R/D High Speed Data Acquisition System

A digital data acquisition system that meets the requirements of several users (initially the planetary radar program) is planned for general use at Deep Space Station 14 (DSS 14). The system, now partially complete, is controlled by VAX 11/780 computer that is programmed in high level languages. A DEC Data Controller is included for moderate-speed data acquisition, low speed data display, and for a digital interface to special user-provided devices. The high-speed data acquisition is performed in devices that are being designed and built at JPL. Analog IF signals are converted to a digitized 50 MHz real signal. This signal is filtered and mixed digitally to baseband after which its phase code (a PN sequence in the case of planetary radar) is removed. It may then be accumulated (or averaged) and fed into the VAX through an FPS 5210 array processor. Further data processing before entering the VAX is thus possible (computation and accumulation of the power spectra, for example). The system is to be located in the research and development pedestal at DSS 14 for easy access by researchers in radio astronomy as well as telemetry processing and antenna arraying.

Deutsch, L. J.↗
NASA NTRS2005

Unified Planetary Coordinates System: A Searchable Database of Geodetic Information

Over the past 40 years, an enormous quantity of orbital remote sensing data has been collected for Mars from many missions and instruments. Unfortunately these datasets currently exist in a wide range of disparate coordinate systems, making it extremely difficult for the scientific community to easily correlate, combine, and compare data from different Mars missions and instruments. As part of our work for the PDS Imaging Node and on behalf of the USGS Astrogeology Team, we are working to solve this problem and to provide the NASA scientific research community with easy access to Mars orbital data in a unified, consistent coordinate system along with a wide variety of other key geometric variables. The Unified Planetary Coordinates (UPC) system is comprised of two main elements: (1) a database containing Mars orbital remote sensing data computed using a uniform coordinate system, and (2) a process by which continual maintainance and updates to the contents of the database are performed.

Becker, K. J.a↗
NASA NTRS1967

Systems analysis

Selenodesy experiment, data compression, Mars and Venus mass data, Earth-Moon mass ratio, orbits for three-body problem, and unbraked impact time for lunar landing mission - systems analyses

THREE-BODY PROBLEM↗
NASA NTRS1965

Planetary structure.

Probable interior structure of planets in solar system and Moon, based on data relative to terrestrial theory

SOLAR SYSTEM↗
NASA NTRS1995

Incorporating CCSDS telemetry standards and philosophy on Cassini

The Cassini project at the Jet Propulsion Laboratory (JPL) is implementing a spacecraft telemetry system based on the Consultative Committee for Space Data Systems (CCSDS) packet telemetry standards. Resolving the CCSDS concepts with a Ground Data System designed to handle time-division-multiplexed telemetry and also handling constraints unique to a deep-space planetary spacecraft (such as fixed downlink opportunities, small downlink rates and requirements for on-board data storage) have resulted in spacecraft and ground system design challenges. Solving these design challenges involved adapting and extending the CCSDS telemetry standards as well as changes to the spacecraft and ground system designs. The resulting spacecraft/ground system design is an example of how new ideas and philosophies can be incorporated into existing systems and design approaches without requiring significant rework. In addition, it shows that the CCSDS telemetry standards can be successfully applied to deep-space planetary spacecraft.

Day, John C.↗
NASA NTRS1995

Incorporating CCSDS Telemetry Standards and Philosophy on Cassini

The Cassini project at the Jet Propulsion Laboratory (JPL) is implementing a spacecraft telemetry system based on the Consultative Committee for Space Data Systems (CCSDS) packet telemetry standards. Resolving the CCSDS concepts with a Ground Data System designed to handle time-division-multiplexed telemetry and also handling constraints unique to a deep-space planetary spacecraft (such as fixed downlink opportunities, small downlink rates and requirements for on-board data storage) have resulted in spacecraft and ground system design challenges. Solving these design challenges involved adapting and extending the CCSDS telemetry standards as well as changes to the spacecraft and ground system designs. The resulting spacecraft/ground system design is an example of how new ideas and philosophies can be incorporated into existing systems and design approaches without requiring significant rework. In addition, it shows that the CCSDS telemetry standards can be successfully applied to deep-space planetary spacecraft.

CCSDS↗