Search NASA⌕ Search

SEARCH · Search NASA

Results for “square waves”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14
All sourcesNASA NTRSDOE OSTI
NASA NTRS1987

Resistojet control and power for high frequency ac buses

Resistojets are operational on many geosynchronous communication satellites which all use dc power buses. Multipropellant resistojets were selected for the Initial Operating Capability (IOC) Space Station which will supply 208 V, 20 kHz power. This paper discusses resistojet heater temperature controllers and passive power regulation methods for ac power systems. A simple passive power regulation method suitable for use with regulated sinusoidal or square wave power was designed and tested using the Space Station multipropellant resistojet. The breadboard delivered 20 kHz power to the resistojet heater. Cold start surge current limiting, a power efficiency of 95 percent, and power regulation of better than 2 percent were demonstrated with a two component, 500 W breadboard power controller having a mass of 0.6 kg.

Gruber, Robert P.↗
NASA NTRS1988

A simplified, general-purpose deep-space ranging correlator design

A much-simplified, yet more general-purpose multi-channel deep-space ranging system correlator design that was used in past JPL spacecraft ranging systems is described. The method applies to detection of both single-component and multiple-component ranging codes, in either sequential (mu) or composite (pi) transmitted forms, and using either pseudonoise or square-wave components. Using this design, the Phobos Probe ranging system correlator computational complexity was reduced by over three orders of magnitude in multiply-and-add circuits and 45,000 bits of accumulator storage.

Tausworthe, R. C.↗
NASA NTRS1988

Magnetic fields in the vicinity of pulsed electron beams in space

The electric component of the fields generated by a pulsed electron beam in a magnetized plasma was derived by Harker and Banks (1987). The beam was modeled as an infinite train of square-wave pulses and the radiation was obtained by adding coherently the radiation from each individual electron in the idealized helical trajectory assumed by the beam. Here the analysis is completed by presenting the magnetic components.

Neubert, T.↗
NASA NTRS1988

Universal limiter for transient interpolation modeling of the advective transport equations: The ULTIMATE conservative difference scheme

A fresh approach is taken to the embarrassingly difficult problem of adequately modeling simple pure advection. An explicit conservative control-volume formation makes use of a universal limiter for transient interpolation modeling of the advective transport equations. This ULTIMATE conservative difference scheme is applied to unsteady, one-dimensional scalar pure advection at constant velocity, using three critical test profiles: an isolated sine-squared wave, a discontinuous step, and a semi-ellipse. The goal, of course, is to devise a single robust scheme which achieves sharp monotonic resolution of the step without corrupting the other profiles. The semi-ellipse is particularly challenging because of its combination of sudden and gradual changes in gradient. The ULTIMATE strategy can be applied to explicit conservation schemes of any order of accuracy. Second-order schemes are unsatisfactory, showing steepening and clipping typical of currently popular so-called high resolution shock-capturing of TVD schemes. The ULTIMATE third-order upwind scheme is highly satisfactory for most flows of practical importance. Higher order methods give predictably better step resolution, although even-order schemes generate a (monotonic) waviness in the difficult semi-ellipse simulation. Little is to be gained above ULTIMATE fifth-order upwinding which gives results close to the ultimate for which one might hope.

Leonard, B. P.↗
NASA NTRS1989

Universal limiter for high order explicit conservative advection schemes

A simple method for construction of nonoscillatory, explicit, conservative advection schemes of arbitrarily high accuracy is described. Four test profiles are considered: an isolated sine-squared wave, a unit step function, a semiellipse, and a narrow Gaussian. A universal limiter guarantees monotonic resolution of the step. Sharpness increases uniformly with the order of the base scheme.

Leonard, B. P.↗
NASA NTRS1990

High-Voltage Digital-To-Analog Converter

High-voltage 10-bit digital-to-analog converter operates under computer control to put out voltages up to 500 V at currents up to 35 mA. Circuit includes high-voltage power supply used to generate high-voltage square wave at frequency set by computer at value between 0.2 Hz and 10 Hz. Used to drive 0.02-microfarad, 1-kV capacitor at slewing rate of 1 V/microsecond to provide signal for robotic imaging system.

Huston, Steven W.↗
NASA NTRS1989

Costas loop lock detection in the advanced receiver

The advanced receiver currently being developed uses a Costas digital loop to demodulate the subcarrier. Previous analyses of lock detector algorithms for Costas loops have ignored the effects of the inherent correlation between the samples of the phase-error process. Accounting for this correlation is necessary to achieve the desired lock-detection probability for a given false-alarm rate. Both analysis and simulations are used to quantify the effects of phase correlation on lock detection for the square-law and the absolute-value type detectors. Results are obtained which depict the lock-detection probability as a function of loop signal-to-noise ratio for a given false-alarm rate. The mathematical model and computer simulation show that the square-law detector experiences less degradation due to phase jitter than the absolute-value detector and that the degradation in detector signal-to-noise ratio is more pronounced for square-wave than for sine-wave signals.

Mileant, A.↗
NASA NTRS1990

Analytical study of the origin and behavior of asymmetric vortices

An hypothesis advanced originally to explain computational observations is supported by theoretical considerations: The asymmetric mean flow observed on bodies of revolution at moderate to high angles of attack is the result of a convective instability of an originally symmetric flow to a time-invariant space-fixed disturbance. Additionally, the time-dependent fluctuations characteristic of the flow at higher angles of attack (up to 90 deg) are the result of an absolute instability of an originally steady flow to a small temporal disturbance of finite duration. Within a common domain, the instability mechanisms may coexist. The experimentally confirmed existence of bistable states, wherein the side-force variation with nose roll angle approaches a square-wave distribution, is attributed to the dominant influence of a pair of trailing vortices from the ogival forebody. Their existence is made possible by the appearance of foci of separation in the skin-friction line pattern beyond a critical angle of attack. The extreme sensitivity of the asymmetric flow orientation to nose geometry, demonstrated experimentally, is attributed to the presence of an indeterminate phase in the family of possible solutions for the three-dimensional wave system.

Tobak, Murray↗
NASA NTRS1990

A functional description of the advanced receiver

The breadboard Advanced Receiver 2 (ARX 2) that is currently being built for future use in NASA's Deep Space Network (DSN) is described. The hybrid analog/digital receiver performs multiple functions including carrier, subcarrier, and symbol synchronization. Tracking can be achieved for residual, suppressed, or hybrid carriers and for both sinusoidal and square-wave subcarriers. Other functions such as time-tagged Doppler extraction and monitor/control are also discussed, including acquisition algorithms and lock-detection schemes. System requirements are specified and a functional description of the ARX 2 is presented. The various digital signal-processing algorithms used are also discussed and illustrated with block diagrams.

Hinedi, S.↗
NASA NTRS1990

Validity of the two-level model for Viterbi decoder gap-cycle performance

A two-level model has previously been proposed for approximating the performance of a Viterbi decoder which encounters data received with periodically varying signal-to-noise ratio. Such cyclically gapped data is obtained from the Very Large Array (VLA), either operating as a stand-alone system or arrayed with Goldstone. This approximate model predicts that the decoder error rate will vary periodically between two discrete levels with the same period as the gap cycle. It further predicts that the length of the gapped portion of the decoder error cycle for a constraint length K decoder will be about K-1 bits shorter than the actual duration of the gap. The two-level model for Viterbi decoder performance with gapped data is subjected to detailed validation tests. Curves showing the cyclical behavior of the decoder error burst statistics are compared with the simple square-wave cycles predicted by the model. The validity of the model depends on a parameter often considered irrelevant in the analysis of Viterbi decoder performance, the overall scaling of the received signal or the decoder's branch-metrics. Three scaling alternatives are examined: optimum branch-metric scaling and constant branch-metric scaling combined with either constant noise-level scaling or constant signal-level scaling. The simulated decoder error cycle curves roughly verify the accuracy of the two-level model for both the case of optimum branch-metric scaling and the case of constant branch-metric scaling combined with constant noise-level scaling. However, the model is not accurate for the case of constant branch-metric scaling combined with constant signal-level scaling.

Dolinar, S.↗
NASA NTRS1990

Infrared detector responsivity measured simultaneously at multiple frequencies

The responsivity (the ratio of the output electrical signal to the incident radiation power) of an IR detector is measured at several frequencies simultaneously. A computer-controlled variable frequency chopper is used. Chopper modulation of a blackbody is square-wave-like, hence measurements can be taken not only at the fundamental frequency but also at the harmonics. The technique gives excellent agreement with the classical technique of measuring the fundamental response alone at a set of modulation frequencies. With a small enough aperture and a high enough chopper speed, agreement can be within five percent out to 31 times the fundamental frequency. The technique allows the rapid and automated acquisition of the frequency response of IR detectors, which may then be screened for responsivity, noise, and noise equivalent power.

Brasunas, John C.↗
NASA NTRS1991

Characterization Of Electrical Response Of Photodetector

Fourier analysis is basis of method of characterizing electrical frequency or time response of photodetector. In method, detector stimulated by optical input signal, intensity modulated with square wave or other repetitive waveform of known frequency spectrum, and output of detector recorded. Electro-optical transfer function, which characterizes frequency response of detector, then computed as ratio between discrete Fourier transforms of output and input waveforms.

Hagopian, John G.↗
NASA NTRS1991

High-power converters for space applications

Phase 1 was a concept definition effort to extend space-type dc/dc converter technology to the megawatt level with a weight of less than 0.1 kg/kW (220 lb./MW). Two system designs were evaluated in Phase 1. Each design operates from a 5 kV stacked fuel cell source and provides a voltage step-up to 100 kV at 10 A for charging capacitors (100 pps at a duty cycle of 17 min on, 17 min off). Both designs use an MCT-based, full-bridge inverter, gaseous hydrogen cooling, and crowbar fault protection. The GE-CRD system uses an advanced high-voltage transformer/rectifier filter is series with a resonant tank circuit, driven by an inverter operating at 20 to 50 kHz. Output voltage is controlled through frequency and phase shift control. Fast transient response and stability is ensured via optimal control. Super-resonant operation employing MCTs provides the advantages of lossless snubbing, no turn-on switching loss, use of medium-speed diodes, and intrinsic current limiting under load-fault conditions. Estimated weight of the GE-CRD system is 88 kg (1.5 cu ft.). Efficiency of 94.4 percent and total system loss is 55.711 kW operating at 1 MW load power. The Maxwell system is based on a resonance transformer approach using a cascade of five LC resonant sections at 100 kHz. The 5 kV bus is converted to a square wave, stepped-up to a 100 kV sine wave by the LC sections, rectified, and filtered. Output voltage is controlled with a special series regulator circuit. Estimated weight of the Maxwell system is 83.8 kg (4.0 cu ft.). Efficiency is 87.2 percent and total system loss is 146.411 kW operating at 1 MW load power.

Park, J. N.↗
NASA NTRS1990

Light weight, high power, high voltage dc/dc converter technologies

Power-conditioning weight reductions by orders of magnitude will be required to enable the megawatt-power-level space systems envisioned by the Strategic Defense Initiative, the Air Force, and NASA. An interagency program has been initiated to develop an 0.1-kg/kW dc/dc converter technology base for these future space applications. Three contractors are in the first phase of a competitive program to develop a megawatt dc/dc converter. Researchers at NASA Lewis Research Center are investigating innovative converter topology control. Three different converter subsystems based on square wave, resonant, and super-resonant topologies are being designed. The components required for the converter designs cover a wide array of technologies. Two different switches, one semiconductor and the other gas, are under development. Issues related to thermal management and material reliability for inductors, transformers, and capacitors are being investigated in order to maximize power density. A brief description of each of the concepts proposed to meet the goals of this program is presented.

Kraus, Robert↗
NASA NTRS1991

Theory of the resonance line shape in velocity-modulation spectroscopy

Velocity-modulation spectroscopy is often used to obtain absorption spectra of ions in discharges. However, there have been few studies of the line shape. The resonance line shape in velocity-modulation spectroscopy is derived in the present work. Both sinusoidal modulation and square-wave modulation are treated, and the differences in the resulting line shapes are emphasized. The results are relevant to measurements of ion mobilities, resolved with respect to the internal state of the ion.

Farley, John W.↗
NASA NTRS1992

Emissions Tests Of Two Dc-To-Dc Converters

Report describes tests to characterize unwanted electric and magnetic fields, at frequencies up to few megahertz, radiated by two dc-to-dc converters, one 20-kHz square-wave converter; the other, a 33-kHz sine-wave converter. Part of effort to develop "quiet" power converter for use aboard spacecraft. Converter required to interfere minimally with delicate instruments measuring electric and magnetic fields.

Mclyman, W. T.↗
NASA NTRS1992

Behavior Of Costas Loop In Reception Of Telemetry

Report presents study of behavior of Costas loop in reception of binary non-return-to-zero telemetry signal phase-shift-modulated onto sinusoidal or square-wave subcarrier signal in turn phase-modulated onto carrier signal. Equations describe degradation of performance of Costas loop in terms of phase jitter, conditions causing loss of lock, and other effects. Costas loop used to track telemetry signal with residual carrier in presence of Doppler shift. Performance optimized by suitable choice of bit rate, waveform and frequency of subcarrier, and noise bandwidth of filters in arms of Costas loop.

Nguyen, Tien Manh↗
NASA NTRS1992

Testing of the anemometer circuit: Data report

The following text discusses results from the electronic step testing and the beginning of velocity step testing in the shock tube. It should be kept in mind that frequency response is always measured as the time from the beginning of the event to the minimum (positive inflection) of the 'bucket' that immediately follows the response. This report is not a complete account of the results from square wave testing. Some data is still in the process of being analyzed and efforts are being made to fit the data to both Freymuth's third order theory and modelled responses from SPICE circuit simulation software.

Moen, Michael J.↗