Search NASA⌕ Search

SEARCH · Search NASA

Results for “surface parameters”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14

Surface Microhardness of Parts Machined by Asymmetric Uninterrupted Lapping

To improve the wear resistance of high-precision machine parts, a new technology has been developed: asymmetric uninterrupted lapping. The influence of its basic parameters on the surface microhardness is investigated. The optimal parameter values corresponding to maximum surface microhardness are determined.

42 ENGINEERING↗

Colloid Transport in Saturated Porous Media: Elimination of Attachment Efficiency in a New Colloid Transport Model

A new colloid transport model is introduced that is conceptually simple but captures the essential features of complicated attachment and detachment behavior of colloids when conditions of secondary minimum attachment exist. This model eliminates the empirical concept of collision efficiency; the attachment rate is computed directly from colloid filtration theory. Also, a new paradigm for colloid detachment based on colloid population heterogeneity is introduced. Assuming the dispersion coefficient can be estimated from tracer behavior, this model has only two fitting parameters: (1) the fraction of colloids that attach irreversibly and (2) the rate at which reversibly attached colloids leave the surface. These two parameters were correlated to physical parameters that control colloid transport such as the depth of the secondary minimum and pore water velocity. Given this correlation, the model serves as a heuristic tool for exploring the influence of physical parameters such as surface potential and fluid velocity on colloid transport. This model can be extended to heterogeneous systems characterized by both primary and secondary minimum deposition by simply increasing the fraction of colloids that attach irreversibly.

Landkamer, Lee L.↗

A New Approach to Predict Hydrogeological Parameters Using Shear Waves from the Multichannel Analysis of Surface Waves Method

For near-surface contaminant characterization, the accurate prediction of hydrogeological parameters in anisotropic and heterogeneous environments has been a challenge since the last decades. However, recent advances in near-surface geophysics have facilitated the use of geophysical data for hydrogeological characterization in the last few years. A pseudo 3-D high resolution P-wave shallow seismic reflection survey was performed at the P Reactor Area, Savannah River Site, South Carolina in order to delineate and predict migration pathways of a large contaminant plume including trichloroethylene. This contaminant plume originates from the northwest section of the reactor facility that is located within the Upper Atlantic Coastal Plain. The data were collected with 40 Hz geophones, an accelerated weight-drop as seismic source and 1 m receiver spacing with near- and far-offsets of 0.5 and 119.5 m, respectively. In such areas with near-surface contaminants, a detailed subsurface characterization of the vadose zone hydraulic parameters is very important. Indeed, an inexpensive method of deriving such parameters by the use of seismic reflection surveys is beneficial, and our approach uses the relationship between seismic velocity and hydrogeological parameters together with empirical observations relating porosity to permeability and hydraulic conductivity. Shear wave velocity ( V s ) profiles were estimated from surface wave dispersion analysis of the seismic reflection data and were subsequently used to derive hydraulic parameters such as porosity, permeability, and hydraulic conductivity. Additional geophysical data including core samples, vertical seismic profiling, surface electrical resistivity tomography, natural gamma and electrical resistivity logs allowed for a robust assessment of the validity and geological significance of the estimated V s and hydrogeological models. The results demonstrate the usefulness of this approach for the upper 15 m of shallow unconsolidated sediments even though the survey design parameters were not optimal for surface wave analysis due to the higher than desired frequency geophones.

Engineering↗

A Study on the Surface Composition and Migration of Materials and Their Effect on Surface Microhardness during Micro-EDM of Ti-6Al-4V

This study aims to investigate the effect of machining parameters on the surface topography and composition of Ti-6Al-4V after micro-EDM as well as the effect of elemental composition on the surface microhardness. The surface topography has been studied in terms of quality of machined surface, crater sizes, and the presence of surface defects. Statistical analysis was carried out to study the influence of micro-EDM process parameters, i.e., voltage, capacitance, discharge energy, electrode rotational speed, and the electrode coating, on the elemental composition of the machined surface. It was found that the crater size, and hence the surface finish, was dependent on the electrical parameters only, with more pronounced effect of capacitance over voltage. The 60 V and 30 pF combination resulted in crater size as small as 1 µm, whereas crater size of 12 µm was obtained using a combination of 4700 pF and 112 V. Although smaller capacitance resulted in smaller crater sizes, it also increased the chances of defects or deposition of debris on the machined surface. There was migration of material from the tool electrode, dielectric oil, and atmosphere to the workpiece surface, which influenced the surface topography, crater sizes, and surface microhardness. The effects of non-electrical parameters on the relative percentage of various elements were found to be statistically insignificant. The surface microhardness was found to increase slightly due to the surface modification after EDM. The reason for increase in surface microhardness was identified as the migration of tungsten from the tool electrode and carbon from the dielectric. The maximum surface microhardness of 455 HV was obtained at a surface composition after micro-EDM containing 7.96% C and 9.69% W, where non-machined Ti-6Al-4V surface does not have any carbon or tungsten on the surface.

36 MATERIALS SCIENCE↗

Local synthesis of 3D magnetic surfaces

Local synthesis of nested 3D toroidal magnetic surfaces is carried out on the basis of the general theory of surfaces by using magnetic coordinates (generally unknown a priori). An equilibrium magnetic surface is calculated by specifying two functions on the surface (the absolute value of the magnetic field and the distance to the nearest magnetic surface) and three parameters (the rotational transform, pressure gradient, and poloidal current). The choice of the parameters is restricted by the requirement that the surface should be closed toroidally. A method of synthesis of a closed magnetic surface is proposed when two functions—the absolute value of the magnetic field and the major radius—are specified. A set of harmonics of a new type of poloidally preudosymmetric configuration (a toroidal mirror with a large mirror ratio and small rotational transform) is obtained.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Data Assimilative Optimization of WSA Source Surface and Interface Radii using Particle Filtering

TheWang-Sheeley-Arge (WSA) model estimates solar wind speed and interplanetary magnetic field polarity in the inner heliosphere using global photospheric magnetic field maps. WSA employs the Potential Field Source Surface (PFSS) and Schatten Current Sheet (SCS) models to determine the Sun's global coronal magnetic field. The PFSS and SCS models are connected through two radial parameters, the source surface and interface radii, which specify the overlap region between the inner SCS and outer PFSS models. Though both radii values are adjustable, they have typically been fixed to 2.5 solar radii. Our work highlights how solar wind predictions improve when the radii are allowed to vary over time. Data assimilation using particle filtering (sequential Monte Carlo) is used to infer optimal values over a fixed time window. Solar wind model predictions and satellite observations are compared with a newly developed quality-of-agreement prediction metric. The agreement metric between the model and observations is assumed to correspond to the probability of the two key WSA model parameters, the source surface and interface radii, where the highest metric value implies the optimal radii.We find that the optimal particle filter values of solar radii can perform twice as well as standard values for an exploratory period during Carrington Rotation 1901, with these values also reducing nonphysical kinking effects seen in solar magnetic field lines. Data assimilation choices of input realization and time frame have implications for variation in the solar wind over time. We present this work's theoretical context and practical applications for prediction accuracy.

79 ASTRONOMY AND ASTROPHYSICS↗

Janus Membranes via Diffusion-Controlled Atomic Layer Deposition

The first use of atomic layer deposition (ALD) to produce Janus membranes is reported, with an example system consisting of a compositional gradient ranging from hydrophilic Al 2 O 3 on one face to hydrophobic poly(propylene) on the opposite face. Alternating pulses of trimethyl aluminum and water vapor lead to the growth of covalently bonded Al 2 O 3 conforming to the membrane pore surfaces. Precise control of ALD parameters significantly affects the surface wetting of the modified membrane face and the depth of Al 2 O 3 infiltration into the porosity. This depth control derives from slow precursor diffusion through the 200 nm membrane pores compared to much faster ALD surface reactions. For a given precursor exposure and purge time, increasing the number of ALD cycles decreases the water contact angle at the modified surface from hydrophobic to hydrophilic, until the water droplet is completely imbibed by the membrane. To demonstrate the utility of these Janus membranes, a hydrophilic/superaerophobic Janus treatment is shown to greatly reduce the size of air bubbles generated through the membrane, enabling faster mixing. This technique represents the first application of vapor-deposited covalently bonded metal oxides to form Janus membranes. Further opportunities are afforded by the ability to laterally pattern Al 2 O 3 across the membrane surface via physical masking.

36 MATERIALS SCIENCE↗

Development of attenuation and diffraction corrections for linear and nonlinear Rayleigh surface waves radiating from a uniform line source

In recent studies with nonlinear Rayleigh surface waves, harmonic generation measurements have been successfully employed to characterize material damage and microstructural changes, and found to be sensitive to early stages of damage process. A nonlinearity parameter of Rayleigh surface waves was derived and frequently measured to quantify the level of damage. The accurate measurement of the nonlinearity parameter generally requires making corrections for beam diffraction and medium attenuation. These effects are not generally known for nonlinear Rayleigh waves, and therefore not properly considered in most of previous studies. In this paper, the nonlinearity parameter for a Rayleigh surface wave is defined from the plane wave displacement solutions. We explicitly define the attenuation and diffraction corrections for fundamental and second harmonic Rayleigh wave beams radiated from a uniform line source. Attenuation corrections are obtained from the quasilinear theory of plane Rayleigh wave equations. To obtain closed-form expressions for diffraction corrections, multi-Gaussian beam (MGB) models are employed to represent the integral solutions derived from the quasilinear theory of the full two-dimensional wave equation without parabolic approximation. Diffraction corrections are presented for a couple of transmitter-receiver geometries, and the effects of making attenuation and diffraction corrections are examined through the simulation of nonlinearity parameter determination in a solid sample.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Novel fractal-textured solar absorber surfaces for concentrated solar power

The solar absorptance of a thermal receiver surface significantly affects the photothermal conversion efficiency of concentrated solar power (CSP) plants. The development of low-cost Gen3 CSP systems calls for increasing the solar absorptance of the thermal receivers at operating temperatures above 750 °C. This study presents an innovative approach to the fractal, multiscale texturing of absorber surfaces to significantly enhance solar energy absorption for Gen3 CSP applications. The absorber surface is described in terms of its fractal parameters that are uniquely determined from surface profile measurements. The interaction of solar radiation with the fractal surface is numerically simulated by solving the governing Maxwell’s equations for electromagnetic wave propagation to investigate the effect of texturing on the absorptance of the surfaces. It is shown that absorption of the solar spectrum increases with an increase in the fractal dimension and the multiscale asperity height of the surface texturing. Here, the theoretical model is demonstrated to be in close agreement with experimental measurements of spectral absorptance of electrodeposited copper (Cu), copper mono-oxide (CuO), and copper-manganese oxide (CuMnO) surfaces that are textured to produce a range of fractal parameters by tailoring the deposition parameters. Fractal surface texturing is shown to reduce reflectance by over one order of magnitude, yielding an absorptance of greater than 0.985 for CuMnO. For the first time, the study presents a significant effective means of increasing solar absorptance and a fundamental theoretical description of the underlying physics.

14 SOLAR ENERGY↗

Sensitivity of Near-Surface Variables in the RUC Land Surface Model in the Weather Research and Forecasting Model

In this study, we investigate the parametric sensitivity of near-surface variables, such as sensible heat flux, latent heat flux, ground heat flux, hub-height wind speed and land surface temperature, to the parameters used in the Rapid Update Cycle (RUC) land surface model (LSM) during a wintertime and summertime period. The model simulations are compared with observations collected from the second Wind Forecast Improvement Project (WFIP2) field campaign. The results suggest that parameters related to snow/ice and thermal processes can have significant impact on the simulated near-surface variables. Out of the 11 examined parameters, only 6 of them have considerable influences on the model behaviors and explain about 60 ~ 80 % of the estimated total variance of the simulated variables. In addition, the magnitude of the parametric sensitivity varies with season. For instance, parameters associated with snow/ice processes are dominant during the wintertime whereas those associated with thermal processes are more important during the summertime. Furthermore, the impact of the identified parameters on the simulated variables is highly related to the topography. There is a high degree of sensitivity to the parameter values over the slope region. This points out the importance of collecting field observations over steep areas to better quantity the appropriate values of key parameters. Overall, our findings provide a better understanding of the RUC LSM behavior associated with parameter uncertainties and can be used to improve the forecasting skill of land surface processes via calibration of the most uncertain model parameters.

17 WIND ENERGY↗

Metal Organic Frameworks for Xenon Storage Applications

The demand for cheap and convenient xenon storage continues to rise due to its wide spectrum of applications. It is expected that solid-state adsorbents can provide significant advantages over the current isolated stainless-steel tank-based storage technologies. In this context, we investigated metal organic frameworks for use as adsorbents for xenon. Initially, three representative MOFs were synthesized and characterized in terms of Xe storage. The results were used to validate a computational modeling approach, which was later extended to a larger set of materials. The collected results allowed us to rationalize the key parameters (pore volume, surface area, void fraction etc.), which are important for good performance and selection of the best materials for xenon storage

Noble gas, Storage, MOFs↗

The Onset of Nucleate Boiling Prediction in a Mini Channel with the Eulerian Multiphase Flow

The prediction of boiling incipience is a critical issue for a reactor. Vapor lock causes operating instability and undesirable temperature rise, especially for small channels. This study uses the Eulerian multiphase flow boiling model to predict the onset of nucleate boiling in a millimeter scale rectangular channel. Two wall boiling models, namely the RPI (Rensselaer Polytechnic Institute) and the non-equilibrium sub cooled model are applied. Computational fluid dynamics is employed for this study to investigate the impact of operating conditions like liquid flow rate, operating pressure, heat flux, velocity profile, turbulence model, and inlet liquid temperature. Here, the effect of fundamental boiling parameters on the surface wall temperature and vapor volume fraction is also studied. The parameters under consideration are the bubble departure diameter, bubble departure frequency, nucleate site density, quenching time period, and interface heat transfer coefficients. A series of CFD calculations is conducted by varying the considered variables systematically in a wide range of flow conditions covering laminar, transition, and turbulent flows. The sub-component heat fluxes like the liquid convective, the vapor convective, the evaporative, and the quenching terms are monitored to infer the boiling dynamics in the transition region from the single-phase flow to the nucleate boiling zone. It is found that the CFD approach to detecting the boiling incipience point agrees reasonably with available experimental data. However, its limitations, like inaccuracy for lower flow rates and early transition to boiling flow, are also noticed due to the nature of the considered RPI model.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Experimental determination of the thermodynamic parameters affecting the adsorption behaviour and dispersion effectiveness of PCE superplasticizers

For adsorption of three different allylether-based PCE superplasticizers on CaCO{sub 3} surface, the thermodynamic parameters DELTAH, DELTAS and DELTAG were determined experimentally. The GIBBS standard free energy of adsorption DELTAG{sub 0ads}, the standard enthalpy of adsorption DELTAH{sub 0ads} and the standard entropy of adsorption DELTAS{sub 0ads} applying to an unoccupied CaCO{sub 3} surface were obtained via a linear regression of ln K (equilibrium constant) versus 1 / T (VAN'T HOFF plot). Additionally, the thermodynamic parameters characteristic for a CaCO{sub 3} surface loaded already with polymer (isosteric conditions) were determined using a modified CLAUSIUS-CLAPEYRON equation. For all PCE molecules, negative DELTAG values were found, indicating that adsorption of these polymers is energetically favourable and a spontaneous process. Adsorption of PCEs possessing short side chains is mainly instigated by electrostatic attraction and a release of enthalpy. Contrary to this, adsorption of PCEs with long side chains occurs because of a huge gain in entropy. The gain in entropy results from the release of counter ions attached to the carboxylate groups of the polymer backbone and of water molecules and ions adsorbed on the CaCO{sub 3} surface. With increased surface loading, however, DELTAG{sub isosteric} decreases and adsorption ceases when DELTAG becomes 0. The presence of Ca{sup 2+} ions in the pore solution strongly impacts PCE adsorption, due to complexation of carboxylate groups and a reduced anionic charge amount of the molecule. In the presence of Ca{sup 2+}, adsorption of allylether-based PCEs is almost exclusively driven by a gain in entropy. Consequently, PCEs should produce a strong entropic effect upon adsorption to be effective cement dispersants. Molecular architecture, anionic charge density and molecular weight as well as the type of anchor groups present in a superplasticizer determine whether enthalpy or entropy is the dominant force for superplasticizer adsorption.

36 MATERIALS SCIENCE↗

Better practices for inferring ecosystem water use strategy from eddy covariance data

Eddy covariance data are critical for inferring ecosystem water use strategies. Yet, such inferences are sensitive to a range of assumptions applied across studies, hindering our understanding of water use strategies within and across eddy covariance sites. A recent analysis across 151 FLUXNET2015 and AmeriFlux-FLUXNET datasets found that poor model performance was the key driver of non-robust inferences of ecosystem water use strategies. Here, we leverage this previous analysis to (i) identify the specific assumptions that improve inference model performance across most sites, (ii) explain the mechanisms behind the performance improvements, and (iii) check whether better performance improves water use inference. We find that the common practice of fitting a model to canopy conductance (G c ) derived from the evapotranspiration (ET) observations, rather than to observed ET itself, artificially amplifies data errors and degrades the model performance. Next, accounting for vegetation dynamics by applying a growing season filter or incorporating satellite LAI data improves performance, but the former practice may remove soil water stress periods. Lastly, using the leaf-to-air vapor pressure deficit (VPD l ) derived from ET observations as a model input may artificially inflate performance. Based on these results, we recommend selecting observed ET (rather than derived G c ) as the response variable, carefully accounting for vegetation dynamics, and avoiding derived VPD l as a model input; these best practices improve model performance by c. 20% and robustness by c. 80% across all eddy covariance sites. Nevertheless, the performance improvements do not always correspond to more robust inference of water use strategies, as model parameter selection and surface energy budget closure corrections still strongly influence the ecosystem water use parameter estimation in a site-specific manner.

AmeriFlux↗

Fractal Model for Drag Reduction on Multiscale Nonwetting Rough Surfaces

Rough surfaces in contact with a flow of fluid exhibit alternating no-slip and free shear boundary conditions at the solid–liquid and air–liquid interfaces, respectively, thereby potentially offering drag reduction benefits. The balance between the dynamic pressure in the flow and the restoring capillary pressure in the interasperity spaces determines the stability of the Cassie state of wettability and is a function of the relative extent of no-slip and free shear regions per unit surface area. In the present study, using a fractal representation of rough surface topography, an analytical model is developed to quantify the stability of the Cassie state of wettability as well as drag reduction and the friction factor for laminar flow in a rectangular channel between nonwetting multiscale rough surfaces. A systematic study is conducted to quantify the effects of fractal parameters of the surfaces and the flow Reynolds number on drag reduction and the friction factor. The studies are used to develop friction factor curves extending the classical Moody diagram to hydrophobic and superhydrophobic surfaces. On the basis of the studies, regime maps are derived for estimating the extent of drag reduction offered by hydrophobic and superhydrophobic surfaces, revealing that superhydrophobic surfaces do not always offer the best drag reduction performance. The application of the fractal model to practical topographies of nonwetting surfaces of copper, aluminum, and zinc oxide fabricated via electrodeposition and etching is also discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Dependence of high- Z redeposition on the field-to-surface pitch angle and other sheath parameters in tokamaks

Accurately predicting redeposition is vital for high-Z plasma-facing component (PFC) survivability in magnetic confinement fusion. In this study, we categorize high-Z redeposition into three mechanisms: geometric-driven (prompt), sheath-driven (local), and scrape-off-layer-driven (far) redeposition. To investigate these mechanisms, we employ Monte Carlo transport codes to simulate azimuthally symmetric tungsten source erosion and redeposition in a tokamak. By iteratively analyzing critical parameters, we evaluate redeposition scaling for each mechanism. Specifically, we investigate the impact of magnetic-field-to-PFC pitch angle assumptions on PFC losses into the scrape-off layer. Our findings reveal significant pitch angle sensitivity due to an asymmetric prompt vs local redeposition trade-off. These results enhance our understanding of redeposition phenomena in fusion plasma environments.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗