Search NASA⌕ Search

SEARCH · Search NASA

Results for “Electrical propertied and parameters”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Validation of a comprehensive first-principles-based framework for predicting the performance of future stellarators

This paper presents the validation of the GENE-KNOSOS-Tango framework for recovering both the steady-state plasma profiles in the considered radial domain and selected turbulence trends in a stellarator. This framework couples the gyrokinetic turbulence code GENE, the neoclassical transport code KNOSOS, and the transport solver Tango in a multi-timescale simulation feedback loop. Ion-scale kinetic-electron and electron-scale adiabatic-ion flux-tube simulations were performed to evolve the density and temperature profiles for four OP1.2b W7-X scenarios. The simulated density and temperature profiles showed good agreement with the experimental data using a reasonable set of boundary conditions. Equally important was the reproduction of observed trends for several turbulence properties, such as density fluctuations and turbulent heat diffusivities. Key effects were also touched upon, such as electron-scale turbulence and the neoclassical radial electric field shear. The validation of the GENE-KNOSOS-Tango framework enables credible predictions of physical phenomena in stellarators and reactor performance based on a given set of edge parameters.

Gyrokinetic simulations↗
DOE OSTI2020

Advancing PV material performance using nanoscale opto-electrical characterization

The purpose of this program was to improve the efficiency of photovoltaics by characterizing their optoelectronic properties at the nanoscale. We investigated Copper Indium Gallium Selenide (CIGS) materials produced by Dow. We modified an atomic force microscope (AFM) to work with a highly controlled environment under controlled illumination at the probe to study the main power conversion efficiency determining parameters for photovoltaics of open circuit voltage, short circuit current, carrier lifetime and diffusion length, and band alignment at interfaces and defects with sub 10nm spatial resolution of their device materials.

14 SOLAR ENERGY↗
DOE OSTI2022

Single-Crystalline Ni-Rich LiNi x Mn y Co 1– x – y O 2 Cathode Materials: A Perspective

To drive electrical vehicles for long-range, the energy density of Li-ion batteries must be further enhanced, which requires high-energy cathode materials. Among them, Ni-rich LiNi x Mn y Co 1–x–y O 2 (x > 0.5, NMC) is one of the most promising candidates. However, traditional poly-crystal (PC) NMC materials, whose particles are secondary clusters consisting of many primary crystalline particles, are susceptible to pulverization along the inter grain/particle boundaries, resulting in poor cycle stability. Recently, single crystal (SC)-NMC cathodes are proposed as they are believed to have several merits such as high structural integrity, lower interface with electrolyte, and potentially better energy storage performance. Nevertheless, several queries, such as the merits of SC structure and the mechanism for their structure degradation, are still controversial and required to be addressed. Here, in this study, the synthesis parameters, properties, energy storage as well as safety of SC- and PC-NMC cathodes with various Ni contents are critically reviewed, for clarifying the merits and drawbacks of SC. Furthermore, the study focuses on the recent advances of insight mechanisms and strategies for stabilizing the structure/interface by doping, morphology engineering, surface coating, and composition tailoring. The remaining challenges, safety concerns, and perspectives to enhance the electrochemical performance of SC-NMC cathodes for electric vehicle application are followed.

25 ENERGY STORAGE↗
DOE OSTI2020

Effects of various parameters of different porous transport layers in proton exchange membrane water electrolysis

Porous transport layers (PTLs) play an important role in proton exchange membrane water electrolysis (PEMWE) cells. The PTL facilitates water and gas transport, as well as thermal and electrical conduction, and is required to sustain good contact with adjacent components. It is expected that using PTLs with variations in material properties such as structure, composition, thickness and wettability results in performance changes of the PEMWE. Here, a general mathematical PEMWE model is developed that separates and analyzes the contributions of ohmic, activation, diffusion and Nernst potentials. For model validation, three inherently different anode PTL structures (carbon paper, sintered titanium particles, and titanium felt) are operated over a range of conditions. Additionally, the effects of PTL wettability were used to verify the model using Polytetrafluoroethylene (PTFE) treated Toray papers with PTFE loading ranging from 0% to 20%. The modeling results of both PTFE treated and untreated materials show good agreement with the experimental data. Mass transport or diffusion loss is the primary reason for performance differences between PTFE treated and untreated PTLs. Sintered titanium PTLs with thicknesses above 1 mm suffer from up to 33% increased ohmic losses without indicating any obvious changes in activation and diffusion losses when compared to untreated PTLs. The losses of the cell increase when using PTFE treated Toray paper. Individual contributions are quantified and assigned to increased ohmic, activation, and diffusion losses. In conclusion, the proposed model offers insights into the overpotential contributions of a PEMWE. It is a useful tool for predicting performance of various PTL materials and can be applied for PTL development and optimization efforts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Electro-Thermal Characterization of Dynamical VO 2 Memristors via Local Activity Modeling

We report translating the surging interest in neuromorphic electronic components, such as those based on nonlinearities near Mott transitions, into large-scale commercial deployment faces steep challenges in the current lack of means to identify and design key material parameters. These issues are exemplified by the difficulties in connecting measurable material properties to device behavior via circuit element models. Here, the principle of local activity is used to build a model of VO 2 /SiN Mott threshold switches by sequentially accounting for constraints from a minimal set of quasistatic and dynamic electrical and high-spatial-resolution thermal data obtained via in situ thermoreflectance mapping. By combining independent data sets for devices with varying dimensions, the model is distilled to measurable material properties, and device scaling laws are established. The model can accurately predict electrical and thermal conductivities and capacitances and locally active dynamics (especially persistent spiking self-oscillations). The systematic procedure by which this model is developed has been a missing link in predictively connecting neuromorphic device behavior with their underlying material properties, and should enable rapid screening of material candidates before employing expensive manufacturing processes and testing procedures.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Electronic Topological Transition as a Route to Improve Thermoelectric Performance in Bi 0.5 Sb 1.5 Te 3

The electronic structure near the Fermi surface determines the electrical properties of the materials, which can be effectively tuned by external pressure. Bi0.5Sb1.5Te3 is a p-type thermoelectric material which holds the record high figure of merit at room temperature. Here it is examined whether the figure of merit of this model system can be further enhanced through some external parameter. With the application of pressure, it is surprisingly found that the power factor of this material exhibits λ behavior with a high value of 4.8 mW m –1 K –2 at pressure of 1.8 GPa. Such an enhancement is found to be driven by pressure-induced electronic topological transition, which is revealed by multiple techniques. Together with a low thermal conductivity of about 0.89 W m –1 K –1 at the same pressure, a figure of merit of 1.6 is achieved at room temperature. The results and findings highlight the electronic topological transition as a new route for improving the thermoelectric properties.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Resonant interactions involving local vibrational modes in crystals

When an impurity with a light mass is inserted into a crystal, it can undergo a high-frequency oscillation referred to as a local vibrational mode (LVM). A Fermi resonance may occur between the LVM and lower-frequency modes of the defect. The LVM may also interact with phonons or the electromagnetic field. Understanding these interactions can help model and control diffusion, defect reactions, and thermal conductivity. LVMs have been probed in semiconductors using pressure and alloying as experimental parameters, resulting in anticrossing between localized and extended vibrational modes. Furthermore, these types of vibrational interactions could play an important role in the stability and thermal properties of organic–inorganic hybrid semiconductors. The coupling between an LVM and electromagnetic wave yields an “LVM polariton,” an excitation that has significant vibrational and electric-field amplitudes.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2021

Coupling of Spark Plasma Sintering with Advanced Modeling to Enable Process Scale-Up: LDRD Final Project Poster

Electric-field assisted sintering (EFAS) manufacturing techniques reduce energy usage requirements, fabricate near-net-shape parts, and produce bulk nanostructured materials through rapid heating and cooling rates achievable through Joule heating. Process parameters of pulsed DC voltage and constant pressure are applied through stainless steel rams and graphite tooling to the ceramic yttrium oxide powder to be sintered. Our high-fidelity modeling code application advances manufacturing for extreme environments by enabling process-informed design and improving microstructure consistency through multiphysics multiscale process-structure-property-performance correlation simulations.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Soft sample deformation, damage and induced electromechanical property changes in contact- and tapping-mode atomic force microscopy

Probe-induced soft sample damage in atomic force microscopy (AFM), as well as the resulting alteration of local mechanical and electrical properties of the material are explored, specifically comparing contact-mode and intermittent-contact-mode imaging methods. In our experiments, performed on conductive polymer films, induced changes are present in contact-mode imaging while they are negligible or absent in tapping-mode imaging. Here, to understand this result, a viscoelastic parameter extraction is performed, which suggests that permanent sample deformation can readily occur for tip-sample interactions with a duration on the timescale of contact-mode interactions. Using the extracted viscoelastic parameters, a dynamic AFM simulation is conducted, which suggests that the material responds more elastically with reduced or absent sample damage in tapping-mode AFM, due to the higher rate of mechanical deformation and shorter timescales.

42 ENGINEERING↗
DOE OSTI2024

Combination of Counterion Size and Doping Concentration Determines the Electronic and Thermoelectric Properties of Semiconducting Polymers

In both chemical and electrochemical doping of organic semiconductors (OSCs), a counterion, either from the electrolyte or ionized dopant, balances the charge introduced to the OSC. Despite the large influence of this counterion on OSC optical and electronic response, there remains substantial debate on how a fundamental parameter, ion size, impacts these properties. Here, this work resolves much of this debate by accounting for two doping regimes. In the low-doping regime, the Coulomb binding energies between charge carriers on the OSC and the counterions are significant, and larger counterions lead to decreased Coulomb interactions, more delocalized charge carriers, and higher electrical conductivities. In the high-doping regime, the Coulomb binding energies become negligible due to the increased dielectric constant of the films and a smoothing of the energy landscape; thereby, the electrical conductivities depend primarily on the extent of morphological disorder in the OSC. Moreover, in regioregular poly(3-hexylthiophene), rr-P3HT, smaller counterions lead to greater bipolaron concentrations in the low-doping regime due to the increased Coulomb interactions. Emphasizing the impact of the counterion size, it is shown that larger counterions can lead to increased thermoelectric power factors for rr-P3HT.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Elucidating Design Rules toward Enhanced Solid-State Charge Transport in Oligoether-Functionalized Dioxythiophene-Based Alternating Copolymers

This study investigates the solid-state charge transport properties of the oxidized forms of dioxythiophene-based alternating copolymers consisting of an oligoether-functionalized 3,4-propylenedioxythiophene (ProDOT) copolymerized with different aryl groups, dimethyl ProDOT (DMP), 3,4-ethylenedioxythiophene (EDOT), and 3,4-phenylenedioxythiophene (PheDOT), respectively, to yield copolymers P(OE3)-D, P(OE3)-E, and P(OE3)-Ph. At a dopant concentration of 5 mM FeTos 3 , the electrical conductivities of these copolymers vary significantly (ranging between 9 and 195 S cm –1 ) with the EDOT copolymer, P(OE3)-E, achieving the highest electrical conductivity. UV–vis–NIR and X-ray spectroscopies show differences in both susceptibility to oxidative doping and extent of oxidation for the P(OE3) series, with P(OE3)-E being the most doped. Wide-angle X-ray scattering measurements indicate that P(OE3)-E generally demonstrates the lowest paracrystallinity values in the series, as well as relatively small π–π stacking distances. The significant (i.e., order of magnitude) increase in electrical conductivity of doped P(OE3)-E films versus doped P(OE3)-D or P(OE3)-Ph films can therefore be attributed to P(OE3)-E exhibiting both the highest carrier ratios in the P(OE3) series, along with good π–π overlap and local ordering (low paracrystallinity values). Furthermore, these trends in the extent of doping and paracrystallinity are consistent with the reduced Fermi energy level and transport function prefactor parameters calculated using the semilocalized transport (SLoT) model. Observed differences in carrier ratios at the transport edge (c t ) and reduced Fermi energies [η(c)] suggest a broader electronic band (better overlap and more delocalization) for the EDOT-incorporating P(OE3)-E polymer relative to P(OE3)-D and P(OE3)-Ph. Ultimately, we rationalize improvements in electrical conductivity due to microstructural and doping enhancements caused by EDOT incorporation, a structure–property relationship worth considering in the future design of highly electrically conductive systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Evaluation of Phase Change Plaster/Paste Composites for Building Envelopes

Thermal energy storage (TES) materials increase a building’s thermal mass and provide the flexibility to shave and time-shift energy use. These materials are needed to enable grid-interactive efficient buildings, allowing building occupants to lower costs by leveraging free ambient heating/cooling as well as shifting consumption to cheaper electricity periods. Phase change materials (PCMs) that store heat through a solid-liquid/solid-solid transformation are of particular interest for TES because of their ability to store large amounts of energy across a constant temperature or very small temperature range. Furthermore, previous studies on PCM building envelopes evaluated products that may only be incorporated as part of new construction and are not easily applicable to existing, energy-intensive buildings. In this work, we leverage laboratory PCM characterization and whole-building energy simulation to study the energy and cost savings of PCM plaster/paste coatings, which can be applied post construction to both new builds and retrofits of existing buildings (about 40% of residential buildings in the United States fall into the retrofit category). We evaluated the energy impact of PCM plaster/paste composites for a single-family residential building in the United States, including layer design (location and thickness), composite properties (phase change temperature, energy density, and shape of the enthalpy curve), and U.S. climate zone. The enthalpy curve shape of PCM shows that phase change temperature and energy density are not the only two parameters that must be considered for PCM selection. Maximizing the energy density amid the effective TES zone is key to boosting energy savings. We also studied PCM price targets with the aim of achieving reasonable payback periods based on both block and time-of-use electricity rates. Moreover, we developed an empirical equation to provide a rough estimate of the energy savings potential of incorporating PCM without the need to perform detailed simulations. These results will help guide the selection and design of PCM plaster/paste composite elements for residential building envelopes.

ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATION↗
DOE OSTI2021

Cost-Performance Trade-off in thermoelectric air conditioning system with graded and constant material properties

Thermoelectric (TE) air cooling is a solid-state technology that has the potential to replace conventional vapor compression-based air conditioning. In this paper, we present a detailed system-level modeling for thermoelectric air conditioning system with position-dependent (graded) and constant material properties. Strategies for design optimization of the system are provided in terms of cost-performance trade-off. Realistic convection heat transfer at both sides of the system are taken into account in our modeling. Here, the effects of convection heat transfer coefficients, air flowrate, and thermoelectric material properties are investigated with varying key parameters such as TE leg thickness, module fill factor, and input current. Both constant material properties and graded properties are considered for the TE materials, and they are compared in terms of the degree of cooling, coefficient of performance (COP), and power consumption. For graded materials, we employ one-dimensional finite element methods to solve the coupled electrical and thermal current equations with arbitrary profile of material properties varying with position along the TE legs. We find that graded materials can enhance the degree of cooling, but only at the expense of COP, compared to the case of constant property materials. With constant material properties of ZT = 1 and relatively low electric current, the power consumption of TE coolers can be lower than those of conventional air conditioners at an equivalent cooling capacity. Considering additional advantages such as demand-flexible operation, low noise, and high scalability, thermoelectric cooling could be a competitive technology for future air conditioning applications.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2021

Charge density wave and superconductivity in the disordered Holstein model

The interplay between electron-electron correlations and disorder has been a central theme of condensed matter physics over the past several decades, with particular interest in the possibility that interactions might cause delocalization of an Anderson insulator into a metallic state, and the disrupting effects of randomness on magnetic order and the Mott phase. In this work, we extend this physics to explore electron-phonon interactions and show, via exact quantum Monte Carlo simulations, that the suppression of the charge density wave correlations in the half-filled Holstein model by disorder can stabilize a superconducting phase. Our simulations thus capture qualitatively the suppression of charge ordered phases and emergent superconductivity recently seen experimentally.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Static and dynamical properties of the spin-$\frac{5}{2}$ nearly ideal triangular lattice antiferromagnet $\mathrm{Ba_3}$ $\mathrm{MnSb_2}$ $\mathrm{O_9}$

Here, we study the ground state and spin excitations in Ba 3 MnSb 2 O 9 , an easy-plane S = 5/2 triangular lattice antiferromagnet. By combining single-crystal neutron scattering, electric spin resonance (ESR), and spin wave calculations, we determine the frustrated quasi-two-dimensional spin Hamiltonian parameters describing the material. While the material has a slight monoclinic structural distortion, which could allow for isosceles-triangular exchanges and biaxial anisotropy by symmetry, we observe no deviation from the behavior expected for spin waves in the in-plane $120$° state. Even the easy-plane anisotropy is so small that it can only be detected by ESR in our study. In conjunction with the quasi-two-dimensionality, our study establishes that Ba 3 MnSb 2 O 9 is a nearly ideal triangular lattice antiferromagnet with the quasiclassical spin S = 5/2, which suggests that it has the potential for an experimental study of Z- or Z 2 -vortex excitations.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2020

A phenomenological rate of injection model for predicting fuel injection with application to mixture formation in light-duty diesel engines

Fuel injection rate laws are one of the most important pieces of information needed when modeling engine combustion with computational fluid dynamics. In this study, a simple phenomenological model of a common-rail injector was developed and calibrated for the Bosch CRI2.2 platform. The model requires three tunable parameter fits, making it relatively easy to calibrate and suitable for injector modeling when high-fidelity information about the internal injector’s geometry and electrical circuit details are not available. Each injection pulse is modeled as a sequence of up to four stages: an injection needle mechanical opening transient, a full-lift viscous flow inertial transient, a Bernoulli steady-state stage, and a needle descent transient. Parameters for each stage are obtained as polynomial fits from measured injection rate properties. The model enforces total injected mass, and the intermediate stages are only introduced if the injection pulse duration is long enough. Experimental rates of injection from two separate campaigns on the same injector were used to calibrate the model. The model was first validated against measured injection rate laws featuring pilot injections, short partially premixed combustion pulses, and conventional diesel combustion injection strategies. Then, it was employed as an input to engine computational fluid dynamics simulations, which were run to simulate experiments of mixture formation in an optically accessible light-duty diesel engine. It was found that, though simple, this model is capable of predicting both pilot and main injection pulse mass flow rates well: the simulations yielded accurate predictions of in-cylinder equivalence ratio distributions from injection strategies for both partially premixed combustion and pilot injections. Also, once calibrated, the model produced appropriate results for a wide range of injected mass and rail pressure values. Finally, it was observed that usage of such a relatively simple model can be a good choice when high-fidelity injection rate input and highly detailed information of the injector’s geometry and operation are not available, particularly as noticeable discrepancies can be present also among different experimental campaigns on similar hardware.

42 ENGINEERING↗
DOE OSTI2021

Influence of magnetic angle on the E × B drift in a magnetic presheath

In this work, we provide experimental measurements of the E X B flow above a non-magnetic, absorbing boundary in a magnetized plasma. Measurements are taken as a function of the angle between the background magnetic field and the boundary normal. The measurements are compared to computational predictions for oblique magnetic fields based on Chodura's model. Ion flow measurements were obtained with laser induced fluorescence and the presheath potential structure was measured with an emissive probe. The ions were found to accelerate to nearly 30% of the sound speed parallel to the boundary at oblique angles of the magnetic field (~80°) and the ion speed at the electrostatic sheath edge was found to decrease with angle. The edge of the magnetic presheath has been experimentally determined based on the appearance of the E X B drift and is found to be independent of the angle of the magnetic field. We also demonstrate that laser induced fluorescence is suitable as a non-perturbative diagnostic to measure the electric field in a magnetized sheath.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2024

Reversible Phasonic Control of a Quantum Phase Transition in a Quasicrystal

Periodic driving can tune the quasistatic properties of quantum matter. A well-known example is the dynamical modification of tunneling by an oscillating electric field. Here we show experimentally that driving the phasonic degree of freedom of a cold-atom quasicrystal can continuously tune the effective quasidisorder strength, reversibly toggling a localization-delocalization quantum phase transition. Measurements agree with fit-parameter-free theoretical predictions, and illuminate a fundamental connection between Aubry-André localization in one dimension and dynamic localization in the associated two-dimensional Harper-Hofstadter model. These results open up new experimental possibilities for dynamical coherent control of quantum phase transitions.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗