Search NASA⌕ Search

SEARCH · Search NASA

Results for “FRETTING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15
All sourcesNASA NTRSDOE OSTI
DOE OSTI2018

Investigation of the Effect of Residual Stress Gradient on the Wear Behavior of PVD Thin Films

The control of residual stresses has been seldom investigated in multilayer coatings dedicated to improvement of wear behavior. Here, we report the preparation and characterization of superposed structures composed of Cr, CrN and CrAlN layers. Nano-multilayers CrN/CrAlN and Cr/CrN/CrAlN were deposited by Physical Vapor Deposition (PVD) onto Si (100) and AISI4140 steel substrates. The Cr, CrN and CrAlN monolayers were developed with an innovative approach in PVD coatings technologies corresponding to deposition with different residual stresses levels. Composition and wear tracks morphologies of the coatings were characterized by scanning electron microscopy, high-resolution transmission electron microscopy, atomic force microscopy, x-ray photoelectron spectroscopy, energy-dispersive x-ray spectroscopy, x-ray diffraction and 3D-surface analyzer. The mechanical properties (hardness, residual stresses and wear) were investigated by nanoindentation, interferometry and micro-tribometry (fretting-wear tests). Observations suggest that multilayer coatings are composed mostly of nanocrystalline. The residual stresses level in the films has practically affected all the physicochemical and mechanical properties as well as the wear behavior. Consequently, it is demonstrated that the coating containing moderate stresses has a better wear behavior compared to the coating developed with higher residual stresses. The friction contact between coated samples and alumina balls shows also a large variety of wear mechanisms. In particular, the abrasive wear of the coatings was a combination of plastic deformation, fine microcracking and microspallation. The application of these multilayers will be wood machining of green wood.

36 MATERIALS SCIENCE↗
DOE OSTI2019

DLC-coating Application to Improve the Durability of Ceramic Tools

The work is devoted to the experimental study of the efficiency of Arc-PVD and PACVD industrial technologies for the application of diamond-like carbon (DLC) coatings on ceramic cutting plates based on Al{sub 2}O{sub 3} + TiC to increase the wear resistance of the tool when turning of bearing hardened steel 102Cr6. The authors conducted a set of studies and tests as the study of the structure of DLC coatings (correlation between sp{sup 3} and sp{sup 2} bonds) using photoelectron spectroscopy; evaluation of roughness, microhardness and adhesive bond strength of DLC coatings with the ceramic base; study of coated ceramics wear under fretting conditions; and experimental evaluation of the effect of DLC coatings on the resistance of ceramic plates during turning of hardened steel. The durability of ceramic plates was increased by 1.6 times by applying PACVD DLC coatings. A slightly smaller effect in 1.4 times was achieved by applying DLC coatings using Arc-PVD technology.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Enhanced Mechanical Properties and Wear Resistance of FeCrAl Alloys at ~ 300°C and Higher Temperatures

Abstract Worldwide, light water reactors (LWRs) have been using zirconium (Zr)-based alloys for the cladding of the uranium dioxide fuel for more than 6 decades. Zr alloys oxidize rapidly in the presence of water and steam at temperatures > 450°C; therefore, they do not respond well to scenarios of loss of coolant accidents. There is a global effort by nuclear materials technologists to find more robust or stronger cladding materials for LWRs. One option is to use an iron-chromium-aluminum (FeCrAl) alloy since they have excellent resistance to high temperature oxidation and superior mechanical properties at LWR operation temperatures. Results show that (1) FeCrAl alloys have better mechanical properties than Zr alloy and are orders of magnitude more resistant to creep at temperatures higher than LWR normal operation conditions. (2) FeCrAl alloys have better resistance to fretting wear than Zr alloys at the normal operation conditions of LWRs.

Materials Science↗
DOE OSTI2014

Mechanism of the Rpn13-induced activation of Uch37

Uch37 is a de-ubiquitinating enzyme that is activated by Rpn13 and involved in the proteasomal degradation of proteins. The full-length Uch37 was shown to exhibit low iso-peptidase activity and is thought to be auto-inhibited. Structural comparisons revealed that within a homodimer of Uch37, each of the catalytic domains was blocking the other’s ubiquitin (Ub)-binding site. This blockage likely prevented Ub from entering the active site of Uch37 and might form the basis of auto-inhibition. To understand the mode of auto-inhibition clearly and shed light on the activation mechanism of Uch37 by Rpn13, we investigated the Uch37-Rpn13 complex using a combination of mutagenesis, biochemical, NMR, and smallangle X-ray scattering (SAXS) techniques. Our results also proved that Uch37 oligomerized in solution and had very low activity against the fluorogenic substrate ubiquitin-7-amino-4-methylcoumarin (Ub-AMC) of de-ubiquitinating enzymes. Uch37Δ Hb,Hc,KEKE , a truncation removal of the C-terminal extension region (residues 256– 329) converted oligomeric Uch37 into a monomeric form that exhibited iso-peptidase activity comparable to that of a truncation-containing the Uch37 catalytic domain only. We also demonstrated that Rpn13C (Rpn13 residues 270– 407) could disrupt the oligomerization of Uch37 by sequestering Uch37 and forming a Uch37-Rpn13 complex. Uch37 was activated in such a complex, exhibiting 12-fold-higher activity than Uch37 alone. Time-resolved SAXS (TR-SAXS) and FRET experiments supported the proposed mode of auto-inhibition and the activation mechanism of Uch37 by Rpn13. Rpn13 activated Uch37 by forming a 1:1 stoichiometric complex in which the active site of Uch37 was accessible to Ub.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2021

Determination of affinities of lanthanide-binding proteins using chelator-buffered titrations

The recent discoveries of the first proteins that bind lanthanides as part of their biological function not only are relevant to the emerging field of lanthanide-dependent biology, but also hold promise to revolutionize the technologically critical rare earths industry. Although protocols to assess the thermodynamics of metal–protein interactions are well established for “traditional” metal ions in biology, the characterization of lanthanide-binding proteins presents a challenge to biochemists due to the lanthanides' Lewis acidity, propensity for hydrolysis, and high-affinity complexes with biological ligands. These properties necessitate the preparation of metal stock solutions with very low buffered “free” metal concentrations (e.g., femtomolar to nanomolar) for such determinations. Here in this paper we describe several protocols to overcome these challenges. First, we present standardization methods for the preparation of chelator-buffered solutions of lanthanide ions with easily calculated free metal concentrations. We also describe how these solutions can be used in concert with analytical methods including UV–visible spectrophotometry, circular dichroism spectroscopy, Förster resonance energy transfer (FRET), and sensitized terbium luminescence, in order to accurately determine dissociation constants (K d s) of lanthanide–protein complexes. Finally, we highlight how application of these methods to lanthanide-binding proteins, such as lanmodulin, has yielded insights into selective recognition of lanthanides in biology. We anticipate that these protocols will facilitate discovery and characterization of additional native lanthanide-binding proteins, will motivate the understanding of their biological context, and will prompt their applications in biotechnology.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2012

Interaction of Berberine derivative with protein POT1 affect telomere function in cancer cells

Highlights: Black-Right-Pointing-Pointer The protein POT1 plays an important role in telomere protection. Black-Right-Pointing-Pointer Functional POT1 was overexpressed in Escherichia coli for the first time, and purified. Black-Right-Pointing-Pointer Compound Sysu-00692 was found to be the first POT1-binding ligand. Black-Right-Pointing-Pointer Sysu-00692 could interfere with the binding activity of POT1 in vivo. Black-Right-Pointing-Pointer Sysu-00692 had inhibition on telomerase and cell proliferation. -- Abstract: The protein POT1 plays an important role in telomere protection, which is related with telomere elongation and cell immortality. The protein has been recognized as a promising drug target for cancer treatment. In the present study, we cloned, overexpressed in Escherichia coli for the first time, and purified recombinant human POT1. The protein was proved to be active through filter binding assay, FRET and CD experiments. In the initial screening for protein binding ligands using SPR, compound Sysu-00692 was found to bind well with the POT1, which was confirmed with EMSA. Its in vivo activity study showed that compound Sysu-00692 could interfere with the binding between human POT1 and the telomeric DNA through chromatin immunoprecipitation. Besides, the compound showed mild inhibition on telomerase and cell proliferation. As we know, compound Sysu-00692 is the first reported POT1-binding ligand, which could serve as a lead compound for further improvement. This work offered a potentially new approach for drug design for the treatment of cancers.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2013

Rac1 and Cdc42 GTPases regulate shear stress-driven β-catenin signaling in osteoblasts

Highlights: •Shear stress increased TCF/LEF activity and stimulated β-catenin nuclear localization. •Rac1, Cdc42, and RhoA displayed distinct dynamic activity patterns under flow. •Rac1 and Cdc42, but not RhoA, regulate shear stress-driven TCF/LEF activation. •Cytoskeleton did not significantly affect shear stress-induced TCF/LEF activation. -- Abstract: Beta-catenin-dependent TCF/LEF (T-cell factor/lymphocyte enhancing factor) is known to be mechanosensitive and an important regulator for promoting bone formation. However, the functional connection between TCF/LEF activity and Rho family GTPases is not well understood in osteoblasts. Herein we investigated the molecular mechanisms underlying oscillatory shear stress-induced TCF/LEF activity in MC3T3-E1 osteoblast cells using live cell imaging. We employed fluorescence resonance energy transfer (FRET)-based and green fluorescent protein (GFP)-based biosensors, which allowed us to monitor signal transduction in living cells in real time. Oscillatory (1 Hz) shear stress (10 dynes/cm{sup 2}) increased TCF/LEF activity and stimulated translocation of β-catenin to the nucleus with the distinct activity patterns of Rac1 and Cdc42. The shear stress-induced TCF/LEF activity was blocked by the inhibition of Rac1 and Cdc42 with their dominant negative mutants or selective drugs, but not by a dominant negative mutant of RhoA. In contrast, constitutively active Rac1 and Cdc42 mutants caused a significant enhancement of TCF/LEF activity. Moreover, activation of Rac1 and Cdc42 increased the basal level of TCF/LEF activity, while their inhibition decreased the basal level. Interestingly, disruption of cytoskeletal structures or inhibition of myosin activity did not significantly affect shear stress-induced TCF/LEF activity. Although Rac1 is reported to be involved in β-catenin in cancer cells, the involvement of Cdc42 in β-catenin signaling in osteoblasts has not been identified. Our findings in this study demonstrate that both Rac1 and Cdc42 GTPases are critical regulators in shear stress-driven β-catenin signaling in osteoblasts.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2015

Interactions of a potent cyclic peptide inhibitor with the light chain of botulinum neurotoxin A: insights from x-ray crystallography

The seven antigenically distinct serotypes (A to G) of botulinum neurotoxin (BoNT) are responsible for the deadly disease botulism. BoNT serotype A (BoNT/A) exerts its lethal action by cleaving the SNARE protein SNAP-25, leading to inhibition of neurotransmitter release, flaccid paralysis and autonomic dysfunction. BoNTs are dichain proteins: the heavy chain is responsible for neurospecific binding, internalization and translocation, and the light chain is responsible for substrate cleavage. Because of their extreme toxicity and prior history of weaponization, the BoNTs are considered to be potential bioterrorism agents. No post-symptomatic therapeutic interventions are available for BoNT intoxication other than critical care; therefore it is imperative to develop specific antidotes against this neurotoxin. To this end, a cyclic peptide inhibitor (CPI-1) was synthesized and found to inhibit BoNT/A light chain (Balc) with high affinity. When tested in a cell-free Förster resonance excitation transfer (FRET) assay, CPI-1 was found to have a K i of 13.9 nM using full-length Balc448 and 42.1 nM using a truncated crystallizable form of light chain (Balc424). Co-crystallization of CPI-1 with Balc424 revealed that in the Balc-CPI-1 complex, the inhibitor adopts a helical conformation, occupies a high percentage of the active site cavity and interacts in an amphipathic manner with critical active site residues. The data suggest that CPI-1 prevents SNAP-25 from accessing the Balc active site by blocking both the substrate binding path at the surface and the Zn 2+ binding region involved in catalysis. This is in contrast to linear peptide inhibitors described to date which block only the latter

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2021

Point-localized, site-specific membrane potential optical recording by single fluorescent nanodiscs

Nanodisc technology was implemented as a platform for voltage nanosensors. A fluorescence (Förster) resonance energy transfer (FRET)-based voltage-sensing scheme employing fluorescent nanodiscs and the hydrophobic ion dipicrylamine was developed and utilized to optically record membrane potentials on the single-nanodisc level. Ensemble and single-nanosensor recordings were demonstrated for HEK293 cells and primary cortical neuron cells. Conjugation of nanodiscs to anti-GABA A antibodies allowed for site-specific membrane potential measurements from postsynaptic sites.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2020

Nanoscale serration characteristics of additively manufactured superalloys

Structural elements made of nickel-based superalloys usually operate at high temperatures. Many surface failure mechanisms such as creep, fatigue, fretting fatigue, corrosion, and stress corrosion cracking start from the surface. Thus, studying the surface mechanical properties and deformation behavior of materials is vital in order to draw a correlation between the surface properties and failures. Herein, a nanoindentation technique was implemented to characterize surface properties of a widely used additively manufactured (AM) superalloy, i.e., Inconel 625. The specimens were tested in a range of temperatures in a vacuum chamber. Serrated plastic flow characterized by pop-in events during nanoindentation, known as Portevin-Le Chatelier (PLC) effect, was observed in all three tested elevated temperatures. This phenomenon depicts itself as bursts of plasticity in the loading section of the load-displacement curves. These bursts were studied comprehensively to explore incipient plasticity. Hertzian contact mechanics were implemented to extract the maximum shear stress beneath the indenter from the pop-in loads. The results show that the initial pop-in load increases as the temperature increases. The average initial pop-in load increases by almost four times from 300 °C to 650 °C. This was attributed to the formation of strengthening precipitates. The average size of the serrations and the magnitude of dislocation nucleation increase from 300 °C to 500 °C and decrease from 500 °C to 650 °C. Finally, the serrations are attributed to the dislocation generation and movement as well as their interaction with the solute atoms and precipitates.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Development of high-affinity nanobodies specific for Na V 1.4 and Na V 1.5 voltage-gated sodium channel isoforms

Voltage-gated sodium channels, Na V s, are responsible for the rapid rise of action potentials in excitable tissues. Na V channel mutations have been implicated in several human genetic diseases, such as hypokalemic periodic paralysis, myotonia, and long-QT and Brugada syndromes. Here, we generated high-affinity anti-NaV nanobodies (Nbs), Nb17 and Nb82, that recognize the Na V 1.4 (skeletal muscle) and Na V 1.5 (cardiac muscle) channel isoforms. These Nbs were raised in llama (Lama glama) and selected from a phage display library for high affinity to the C-terminal (CT) region of Na V 1.4. The Nbs were expressed in Escherichia coli, purified, and biophysically characterized. Development of high-affinity Nbs specifically targeting a given human Na V isoform has been challenging because they usually show undesired crossreactivity for different Na V isoforms. Our results show, however, that Nb17 and Nb82 recognize the CTNa V 1.4 or CTNa V 1.5 over other CTNav isoforms. Kinetic experiments by biolayer interferometry determined that Nb17 and Nb82 bind to the CTNa V 1.4 and CTNa V 1.5 with high affinity (K D ~ 40–60 nM). In addition, as proof of concept, we show that Nb82 could detect Na V 1.4 and Na V 1.5 channels in mammalian cells and tissues by Western blot. Furthermore, human embryonic kidney cells expressing holo Na V 1.5 channels demonstrated a robust FRET-binding efficiency for Nb17 and Nb82. Our work lays the foundation for developing Nbs as anti-Na V reagents to capture Na V s from cell lysates and as molecular visualization agents for Na V s.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Activation dynamics of a water-soluble human mu-opioid receptor

The mu-opioid receptor (MOR), a class A G protein-coupled receptor mediates opioid analgesia and remains a central target for pain therapeutics. While crystal structures of MOR exist, they provide limited insight into the receptor’s dynamic conformational landscape underlying function. Here, we engineered a thermostable water-soluble MOR variant (wsMOR) that retains native-like ligand-binding and activation dynamics. This variant enables high-yield production and detailed solution-phase structural studies that are challenging with membrane-embedded MOR, providing a valuable tool for studying receptor activation and aqueous-phase drug screening. Using a combined computational and experimental approach, we performed long-timescale all-atom molecular dynamics simulations together with neutron scattering and single-molecule FRET, revealing a structurally stable receptor with a diverse ensemble of conformations at different temporal resolutions. In the ligand-free state, wsMOR displayed high conformational flexibility, which decreased upon agonist binding, particularly in transmembrane helix 6, a hallmark of G protein-coupled receptor activation. Positive allosteric modulation and G protein binding further stabilized active-like states. These findings highlight wsMOR’s conformational plasticity across picosecond to millisecond timescales and provide a foundation for structure-guided development of next-generation opioid ligands with improved efficacy and safety.

E, Agyemang [University of Tennessee Knoxville]↗
DOE OSTI2012

Measurement and modeling of strain fields in zirconium hydrides precipitated at a stress concentration

Hydrogen adsorption into zirconium, as a result of corrosion in aqueous environments, leads to the precipitation of a secondary brittle hydride phase. These hydrides tend to first form at stress concentrations such as fretting flaws or cracks in engineering components, potentially degrading the structural integrity of the component. One mechanism for component failure is a slow crack growth mechanism known as Delayed Hydride Cracking (DHC), where hydride fracture occurs followed by crack arrest in the ductile zirconium matrix. The current work employs both an experimental and a modeling approach to better characterize the effects and behavior of hydride precipitation at such stress concentrations. Strains around stress concentrations containing hydrides were mapped using High Energy X-ray Diffraction (HEXRD). These studies highlighted important differences in the behavior of the hydride phase and the surrounding zirconium matrix, as well as the strain associated with the precipitation of the hydride. A finite element model was also developed and compared to the X-ray strain mapping results. This model provided greater insight into details that could not be obtained directly from the experimental approaches, as well as providing a framework for future modeling to predict the effects of hydride precipitation under varied conditions.

08 HYDROGEN↗
DOE OSTI2015

A comparative study on the wear behaviors of cladding candidates for accident-tolerant fuel

Accident-tolerant fuels are expected to have considerably longer coping time to respond to the loss of active cooling under severe accidents and, at the same time, have comparable or improved fuel performance during normal operation. The wear resistance of accident tolerant fuels, therefore, needs to be examined to determine the applicability of these cladding candidates to the current operating PWRs because the most common failure of nuclear fuel claddings is still caused by grid-to-rod fretting during normal operations. In this study, reciprocating sliding wear tests on three kinds of cladding candidates for accident-tolerant fuels have been performed to investigate the tribological compatibilities of selfmated cladding candidates and to determine the direct applicability of conventional Zirconium-based alloys as supporting structural materials. The friction coefficients of the cladding candidates are strongly influenced by the test environments and coupled materials. The wear test results under water lubrication conditions indicate that the supporting structural materials for the cladding candidates of accident-tolerant fuels need to be replaced with the same cladding materials instead of using conventional Zirconium-based alloys.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2021

Comprehensive review of photophysical parameters (ε, Φ f , τ s ) of tetraphenylporphyrin (H 2 TPP) and zinc tetraphenylporphyrin (ZnTPP) – Critical benchmark molecules in photochemistry and photosynthesis

Tetraphenylporphyrin (H 2 TPP) and zinc tetraphenylporphyrin (ZnTPP) are widely used benchmark molecules in diverse photochemical studies given facile synthetic access, rich visible-region spectra, and broad structural analogy to chlorophylls. Yet the literature values for each key photophysical parameter – the molar absorption coefficient (ε), fluorescence quantum yield (Φ f ), and also singlet excited-state lifetime (τ S ) – vary over an astonishing range. Here, a comprehensive literature review (~1940–September 2020) encompassing 871 publications is reported for these essential parameters. Each parameter is determined by measurement with distinct instrumentation and suffers idiosyncratic sources of error. The best values for H 2 TPP are ε = 460,000 cm -1 ·M -1 , Φ f = 0.090, and τ S = 12.8 ns in Ar- purged toluene (Φf = 0.070, τS = 9.9 ns in toluene in air); the best values for ZnTPP are ε = 560,000 cm -1 ·M -1 , Φf = 0.030, and τ S = 2.1 ns in Ar-purged toluene (Φ f = 0.029, τ S = 2.0 ns in toluene in air). The choice of values for such parameters has far-reaching consequences in photochemistry ranging from fluorescence (or Förster) resonance energy transfer (FRET) processes to assessments of molecular brightness.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2018

Synergistic role of carbonaceous reinforcements on multi length scale tribology of electrophoretically deposited nickel-boron nitride coatings

Highlights: • Electrophoretic deposition of Ni-BN coating. • Reinforcement of Ni-BN with carbon allotropes (diamond, carbon nanotubes and graphene). • Enhanced hardness and elastic modulus in Ni-BN-D than Ni-BN-CNT and Ni-BN-Gr. • High wear resistance (0.45 × 10{sup −8} m{sup 3}) from fretting and micro-scratch testing of Ni-BN-D. • High compressive stress (−601 MPa) exist in Ni-BN-D coating which restricts wear. - Abstract: Electrophoretically deposited Ni-BN composite coating was strengthened with graphene (Ni-BN-Gr), carbon nanotubes (Ni-BN-CNT) and diamond (Ni-BN-D) carbonaceous reinforcements. Highest hardness (2.0 GPa) and elastic modulus (133.5 GPa) of Ni-BN-D coating than Ni-BN-CNT (1.96 GPa and 102.1 GPa, respectively), Ni-BN-Gr (1.94 GPa and 92.0 GPa respectively) and also from Ni-BN (1.89 GPa and 91.5 GPa, respectively) coatings was linked through high compressive stress (−601 MPa), dislocation density (8.9 × 10{sup 15} m{sup −2}) and yield strength (4.4 GPa). The micro-scratching damage was contributed by ploughing and adhesion components, which were compared with that of experimental frictional values. Addition of graphene, CNT and diamond in Ni-BN composite showed a decrease in wear volume (from 1.66 × 10{sup −8} m{sup 3} to 0.45 × 10{sup −8} m{sup 3}) due to the synergetic lubricating effect of BN and carbonaceous reinforcements. Thus, Ni-BN-D restrict inception of multiscale wear and can be a potential three phase metal-ceramic coating for engineering and industrial applications.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Prognostic model and failure mechanisms of steam generators in Sodium-Cooled fast reactors

This paper presents a prognostic model for sodium-cooled fast reactor (SFR) steam generators (SGs). Here, the purpose of the model is to estimate the remaining useful life of SFR SGs and thus to support the decision-making of autonomous control. SFR SGs are of great interest for plant integrity due to their harsh operation environment. They operate at higher temperatures and higher coolant-to-steam pressure differences than those of current light water reactors (LWR). The severity of the SFR SG failure consequences, which include water-sodium contact, is another reason. Understanding its failure mechanisms is important for the development of its prognostic model. Based on our literature review and physics-based analysis, we concluded that creep would be a dominant degradation mode of SFR SGs due to SFR’s high-temperature and high-pressure environment. Thus, creep is the focus of the prognostic model. Various other failure modes were also investigated in this study. The mechanical fatigue due to flow-induced vibration is usually observed in early developmental phases and would not be an important issue during normal operation. The thermal fatigue due to thermal stripping is occasionally observed in other components in SFRs but does not affect SG integrity. Pure water stress corrosive crack, fretting, and so on are commonly observed in LWR SGs but are significantly less important in SFR SGs because of the high temperatures, high pressure differences, and chemical properties of liquid sodium. Based on these investigations, a prognostic model focusing on creep failures was developed. It estimates the failure probability profile by sampling the Larson-Miller parameter (LMP) and temperature and associated uncertainties through Monte Carlo methods. Two case studies were presented. The first one demonstrated the model’s capability to calculate the failure probability for a new specimen within a given time. If the tube is working under temperatures of 500C ± 3 and pressures of 15.2 MPa, which leads to LMP of 20,100 ± 50, the failure probabilities within 50, 70, and 90 years are approximately 0.1 %, 3.2 %, and 17.5 %. The second demonstrated how adjusting the workload can help to protect the integrity of the component. For an old tube reaching 99 % of its lifespan, continuing to run at temperatures of 500C ± 3 and LMP of 20,100 ± 50 leads to a failure probability of about 29.0 % within a year. If the temperature is reduced by 5C, the failure probability can be reduced to 2.5 %, and, if the pressure is also reduced such that the LMP is increased by 100, the failure probability can further be reduced to 0.12 %.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗