SEARCH · Search NASA

Results for “MASS RATIO”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15

All sources NASA NTRS DOE OSTI

NASA NTRS1987

Analysis of laser extracted volatiles in carbonaceous chondrites

It is scientifically important to understand the composition of volatile compounds from interplanetary dust particles (IDPs) because they may be related to the primordial inventory of planetary materials which were necessary to provide environments conducive to the formation of life. The use of a laser microprobe to measure volatiles in IDPs was evaluated. Because primitive meteorites are thought to be closely related to IDPs, carbonaceous chondrites were used for the evaluation. Three sets of experiments were performed to determine the volatiles released from potential substrate materials, to analyze the volatiles released from matrices of bulk samples of carbonaceous chondrites, and to analyze volatiles released from approx. 100 to 200 micron meteorite particles to simulate IDPs. Aluminum appeared to be the best choice of substrate material. Mass ratios between carbonaceous chondrite matrices of Allende and Murchison show fair reproducibility with somewhat high uncertainties. Particles from the Orgueil, Murchison, and Allende meteorites produced measurable quantities of volatiles that appear to have mass spectra comparable to the bulk matrices.

Blanford, George E.↗

NASA NTRS1989

The shape of the mass distribution in M31 from its globular cluster system

The velocity dispersion and rotation velocity of the M31 globular cluster system depend on the relative division of mass between the flat disk and a spherically symmetric halo. Using the tensor virial theorem, it is shown in detail how the mass ratio can be constrained. Radial velocities have been collected for 149 globular clusters in M31. With no assumptions about the isotropy of the velocity distribution, the globular cluster kinematics are consistent with the mass distribution inferred by the rotation curve but otherwise place no strong constraints on the relative division of the mass. If the velocity distribution is isotropic, models with the disk mass ranging between 1/2 and 1 times its maximum possible value are marginally favored.

Kent, Stephen M.↗

NASA NTRS1990

Ion optics system incorporating radio frequency mass separation

Results of an experimental study are presented. They show that an RF mass discriminator, based on a Bennett mass spectrometer concept, can be used to discriminate between two species of ions with about a 2-to-1 charge-to-mass ratio. Such a device would be useful for separating monatomic and diatomic oxygen ions in a system designed to simulate the environment that spacecraft encounter in low earth orbit. The influence of changing mass discriminator parameters - such as the spacing of its grids, the amplitude and frequency of RF voltage signals applied to it and the current density of ions incident upon it - on its species discrimination capabilities is discussed. Experimental results are also compared to the results of a simple theoretical model to gain insight into the processes occurring in the discriminator. These results are shown to be in good agreement.

Anderson, John R.↗

NASA NTRS2019

OGLE-2018-BLG-1011Lb,c: Microlensing Planetary System with Two Giant Planets Orbiting a Low-mass Star

We report a multiplanetary system found from the analysis of microlensing event OGLE-2018-BLG-1011, for which the light curve exhibits a double-bump anomaly around the peak. We find that the anomaly cannot be fully explained by the binary-lens or binary-source interpretations and its description requires the introduction of an additional lens component. The 3L1S (three lens components and a single source) modeling yields three sets of solutions, in which one set of solutions indicates that the lens is a planetary system in a binary, while the other two sets imply that the lens is a multiplanetary system. By investigating the fits of the individual models to the detailed light curve structure, we find that the multiple-planet solution with planet-to-host mass ratios ∼9.5 X 10(exp −3) and ∼15 X 10(eap −3) are favored over the other solutions. From the Bayesian analysis, we find that the lens is composed of two planets with masses 1.8 (sup +3.4, sub -1.1) M(J) and 2.8 (sup +5.8, sub -1.7) M(J) around a host with a mass 0.18 (sup +0.33,sub - 0.10) M(ʘ) and located at a distance 7.1(sup +1.1, sub -1.5) kpc. The estimated distance indicates that the lens is the farthest system among the known multiplanetary systems. The projected planet–host separations are a(⊥,2) = 1.8 (sup +2.1, sub -1.5)au (0.8 (sup +0.9,sub -0.6 au) and a(⊥,3) = 0.8 (sup +0.9, sub -0.6)au , where the values of a(⊥,2) inside and outside the parenthesis are the separations corresponding to the two degenerate solutions, indicating that both planets are located beyond the snow line of the host, as with the other four multiplanetary systems previously found by microlensing.

Cheongho Han↗

NASA NTRS1993

Masses and densities of Pluto and Charon

We have analyzed HST Wide Field Camera CCD images of Pluto, Charon, and a background star to observe Pluto's barycentric motion and to determine the individual masses and bulk densities of Pluto and Charon. The most fundamental new result was an accurate solution for a previously undetermined parameter, the Charon/Pluto mass ratio q; the new solution is q = 0.0837 +/- 0.0147. Significant accuracy improvements by almost a factor of two were obtained for Charon's orbital semimajor axis, a = 19,405 +/- 86 km and the Pluto system mass of 1.401 +/- 0.019 x 10 exp 8 inverse solar masses. The Pluto and Charon masses were (13.10 +/- 0.24) x 10 exp 24 g and (1.10 +/- 0.18) x 10 exp 24 g, respectively. Computed densities depend strongly on the assumed radius values. The density of Pluto is 2.13 +/- 0.04 g/cu cm and that of Charon is 1.30 +/- 0.23 g/cu cm.

Null, G. W.↗

NASA NTRS1994

Resonantly driven nonlinear density waves in protostellar disks

Recent observations of binary, pre-main-sequence, solar-type stars provide evidence that such systems may coexist with circumstellar disks. The binary disk systems, besides being of general interest for the study of star formation, potentially provide useful tests of companion-disk interaction theories prominent in current hypotheses of planet formation. In this paper, we apply an asymptotic analysis of the nonlinear, resonant interaction of a stellar companion with a disk to understand the dependence of such interactions on the properties of the system: the binary mass ratio, the physical properties of the disk, and the effective dissipation (treated herein as viscosity). The method is based on a WKBJ approximation and exploits the conditions that the disk is thin and much less massive than the primary, but does not require that the companion-induced disturbance be small. Both isothermal and adiabatic responses are treated. Only circular orbit resonances are considered in this paper. It is demonstrated that the temperature of the disk as well as the relative mass of the companion affects the degree of nonlinearity, and that nonlinearity promotes high wave compression ratios, long wavelengths, and increased propagation distances. Nevertheless, the total torque exerted between the companion and the disk is well represented by linear theory. The amplitudes of density disturbances are reduced by viscosity and nonisothermality. Because resonant interactions are generally strong and capable of driving rapid evolution, one might expect observations of systems undergoing strong, resonant-driven evolution to be rare. In this connection, it is pointed out that the m = 1 resonance is distinguished by being anomalously weaker than the others and is therefore of observational interest. It is speculated that, in conditions of intrinsically small dissipation, the propagation of resonant-driven density waves is limited by the tendency of their wavelength to diminish with distance, and that the propagation distance (and therefore the region of the disk to which angular momentum is redistributed) is set by the distance at which the wavelength becomes comparable to the disk thickness.

Yuan, Chi↗

NASA NTRS1967

Systems analysis

Selenodesy experiment, data compression, Mars and Venus mass data, Earth-Moon mass ratio, orbits for three-body problem, and unbraked impact time for lunar landing mission - systems analyses

THREE-BODY PROBLEM↗

NASA NTRS1998

"CHON" particles: The interstellar component of cometary dust

Interstellar dust is characterized by strong absorption in the ultraviolet and the mid-IR. Current models of interstellar dust are based on three chemically distinct components: a form of carbon (usually graphite), a silicate, and a blend of polycyclic aromatic hydrocarbons or other carbonaceous material. Previous work using effective medium theories to understand the optical properties of cometary dust suggested that an amalgam of materials could reproduce the observed interstellar and cometary dust features. Recently, Lawler and Brownlee (1992) re-analyzed the PIA and PUMA-1 data sets from the Giotto flyby of P/Halley and discovered that the so-called "CHON" particles were actually composed of a blend of carbon-bearing and silicon-bearing materials. Based on effective medium theories, the absorption spectrum of such a material would display the spectral features of each of the components - strong UV absorption from the carbonaceous component and strong absorption in the IR from the silicate component. To test this idea, vapor-deposited samples were created using two different deposition techniques: sputtering with an argon RF magnetron and deposition from an argon plasma torch. Two different compositions were tested: a blend of graphite and silica in a 7:1 ratio and an amalgam of materials whose approximate composition matches the "CHON"-silicate abundances for the uncompressed PIA data set of Lawler and Brownlee: graphite, iron oxide, magnesium oxide, ammonium sulfate, calcium carbonate, and silica in mass ratios of 6:4.3:4:2.2:1:9. The samples were finely ground and pressed into 2" diameter disks using a 40 ton press. In all, four different experiments were performed: one with each of the compositions (C:SiO and "CHON") in both the RF magnetron and the plasma torch chambers. The RF magnetron created a uniform dark thin film on the substrate surface, and the plasma torch created a coating of small (<100 micron) diameter grey particles. The spectra of all four samples show a strong, broad absorption feature at around 220 nm as well as a strong but narrower absorption peak near 10 microns. The RF magnetron sputtered samples showed some sub-structure in the UV, and the peak of the absorption was shifted toward longer wavelengths. The UV absorption in the plasma torch deposited samples have no sub-structure, and the peak absorption is very near 220 nm. Strong absorption near 9 microns is seen in the spectra from both sample preparation techniques, and is consistent with the IR spectra of some terrestrial silicates. Other features, particularly at 6.2 and 8.6 microns, are seen in the interstellar medium. A strong feature near 2 microns is due to absorbed water in the sample. Based on the results of these experiments, there is evidence that a material with a composition similar to that detected in "CHON" particles in the coma of P/Halley have a spectral signature which reproduces the main absorption features of interstellar dust. This suggests that the "CHON" particles could be the interstellar component of cometary dust.

Lien, David J.↗

NASA NTRS2005

Nanoactuators Based on Electrostatic Forces on Dielectrics

Nanoactuators of a proposed type would exploit the forces exerted by electric fields on dielectric materials. As used here, "nanoactuators" includes motors, manipulators, and other active mechanisms that have dimensions of the order of nanometers and/or are designed to manipulate objects that have dimensions of the order of nanometers. The underlying physical principle can be described most simply in terms of the example of a square parallel-plate capacitor in which a square dielectric plate is inserted part way into the gap between the electrode plates (see Figure Typically, the force is small from our macroscopic human perspective. The above equation shows that the force depends on the ratio between the capacitor dimensions but does not depend on the size. In other words, the force remains the same if the capacitor and the dielectric slab are shrunk to nanometer dimensions. At the same time, the masses of all components are proportional to third power of their linear dimensions. Therefore the force-to-mass ratio (and, consequently, the acceleration that can be imparted to the dielectric slab) is much larger at the nanoscale than at the macroscopic scale. The proposed actuators would exploit this effect. The upper part of Figure 2 depicts a simple linear actuator based on a parallel- plate capacitor similar to Figure 1. In this case, the upper electrode plate would be split into two parts (A and B) and the dielectric slab would be slightly longer than plate A or B. The actuator would be operated in a cycle. During the first half cycle, plate B would be grounded to the lower plate and plate A would be charged to a potential, V, with respect to the lower plate, causing the dielectric slab to be pulled under plate A. During the second half cycle, plate A would be grounded and plate B would be charged to potential V, causing the dielectric slab to be pulled under plate B. The back-and-forth motion caused by alternation of the voltages on plates A and B could be used to drive a nanopump, for example. A rotary motor, shown in the middle part of Figure 2, could include a dielectric rotor sandwiched between a top and a bottom plate containing multiple electrodes arranged symmetrically in a circle. Voltages would be applied sequentially to electrode pairs 1 and 1a, then 2 and 2a, then 3 and 3a in order to attract the dielectric rotor to sequential positions between the electrode pairs.

Wang, Yu↗

NASA NTRSDate not supplied

Statistical Approach on Utilizing Ground-based Experiments to Model Break-up Events

Two laboratory-based impact tests have been conducted to develop and extend the capability of NASA satellite breakup models. The first experiment, the Satellite Orbital Debris Characterization Impact Test (SOCIT), was conducted by the U.S. Department of Defense and NASA in 1992. It employed a fully functional U.S. Navy Transit spacecraft, fabricated from materials commonly used in the 1960s. SOCIT fragmentation data formed the basis of the current NASA Standard Satellite Breakup Model (SSBM). A second experiment, DebriSat, was conducted in 2014 by the DebriSat consortium: the NASA Orbital Debris Program Office; the United States Space Force Space Systems Command, formerly the Air Force Space and Missile Systems Center, the Air Force Arnold Engineering Development Complex, and the University of Florida. This impact test was performed on a high-fidelity mock-up satellite assembled from modern components. Data from both experiments are expected to contribute to the next-generation models for on-orbit breakup analyses, long-term environment predictions, and debris risk assessment. This paper uses the direct statistical sampling of the SOCIT and DebriSat data ensembles to model an on-orbit breakup event, rather than the analytic expressions estimated from the samples as with as with the NASA SSBM and its predecessor. This direct method involves drawing fragments (i.e., sampling with replacement) from each fragmentation data-subset containing mass, shape category, material density, characteristic length, mass, and cross-sectional area. As part of the sampling process, the properties of sampled fragment data (e.g., area-to-mass ratios) are numerically checked to ensure they do not contain unrealistic quantities. The process to simulate a breakup cloud composed of fragments from SOCIT and DebriSat datasets is discussed. The methodology for ensuring that conservation of overall mass of the sampled fragment cloud under this sampling approach is highlighted. Finally, the results are compared with simulated clouds generated from SSBM for specific historical breakup events.

Andrew Vavrin↗

NASA NTRS2023

Statistical Approach on Utilizing Ground-Based Experiments to Model Break-Up Events

Two laboratory-based impact tests have been conducted to develop and extend the capability of NASA satellite breakup models. The first experiment, the Satellite Orbital Debris Characterization Impact Test (SOCIT), was conducted by the U.S. Department of Defense and NASA in 1992. It employed a fully functional U.S. Navy Transit spacecraft, fabricated from materials commonly used in the 1960s. SOCIT fragmentation data formed the basis of the current NASA Standard Satellite Breakup Model (SSBM). A second experiment, DebriSat, was conducted in 2014 by the DebriSat consortium: the NASA Orbital Debris Program Office, the United States Space Force Space Systems Command, formerly the Air Force Space and Missile Systems Center, the Air Force Arnold Engineering Development Complex, and the University of Florida. This impact test was performed on a high-fidelity mock-up satellite assembled from modern components. Data from both experiments are expected to contribute to the next-generation models for on-orbit breakup analyses, long-term environment predictions, and debris risk assessment. This paper uses the direct statistical sampling of the SOCIT and DebriSat data ensembles to model an on-orbit breakup event, rather than the analytic expressions estimated from the samples in the SSBM and its predecessor. This direct method involves drawing fragments (i.e., sampling with replacement) from each fragmentation data-subset containing mass, shape category, material density, characteristic length, mass, and cross-sectional area. As part of the sampling process, the properties of sampled fragment data (e.g., area-to-mass ratios) are numerically checked to ensure they do not contain unrealistic quantities. The process to simulate a breakup cloud composed of fragments from SOCIT and DebriSat datasets is discussed. The methodology for ensuring that conservation of overall mass of the sampled fragment cloud under this sampling approach is highlighted. Finally, the results are compared with simulated clouds generated from SSBM for specific historical breakup events.

Andrew Vavrin↗

NASA NTRS1992

The hot subdwarf in the eclipsing binary HD 185510

High-resolution spectroscopic measurements of radial velocity are employed to characterize the eclipsing binary HD 185510 in terms of masses and evolutionary status. The IUE is used to obtain the radial velocities which indicate a large mass ratio Mp/Ms of 7.45 +/- 0.15, and Teff is given at 25,000 +/- 1000 K based on Ly alpha and UV spectrophotometry. Photometric observations are used to give an orbital inclination of between 90 and 70 deg inclusive, leading to masses of 0.31-0.37 and 2.3-2.8 solar mass for the hot star and the K star, respectively. The surface gravity of HD 185510B is shown to be higher than those values for sdB stars suggesting that the object is a low-mass white dwarf that has not reached its fully degenerate configuration. The object is theorized to be a low-mass helium main-sequence star or a nascent helium degenerate in a post-Algol system.

Jeffery, C. S.↗

NASA NTRS1995

Multi-Criterion Preliminary Design of a Tetrahedral Truss Platform

An efficient method is presented for multi-criterion preliminary design and demonstrated for a tetrahedral truss platform. The present method requires minimal analysis effort and permits rapid estimation of optimized truss behavior for preliminary design. A 14-m-diameter, 3-ring truss platform represents a candidate reflector support structure for space-based science spacecraft. The truss members are divided into 9 groups by truss ring and position. Design variables are the cross-sectional area of all members in a group, and are either 1, 3 or 5 times the minimum member area. Non-structural mass represents the node and joint hardware used to assemble the truss structure. Taguchi methods are used to efficiently identify key points in the set of Pareto-optimal truss designs. Key points identified using Taguchi methods are the maximum frequency, minimum mass, and maximum frequency-to-mass ratio truss designs. Low-order polynomial curve fits through these points are used to approximate the behavior of the full set of Pareto-optimal designs. The resulting Pareto-optimal design curve is used to predict frequency and mass for optimized trusses. Performance improvements are plotted in frequency-mass (criterion) space and compared to results for uniform trusses. Application of constraints to frequency and mass and sensitivity to constraint variation are demonstrated.

Wu, K. Chauncey↗

NASA NTRS2009

Precision Measurement of Complete Black Hole Binary Inspiral-Merger-Ringdown Signals with LISA

Until recently, only the inspiral and ringdown phases of black hole binary (131-113) coalescences had been modeled. The merger signals, which were expected to be the most luminous portion of the total signal, were unavailable due to the technical difficulty of calculating the behavior of a BHB in this highly dynamical and non-linear regime. Advancements in the field of numerical relativity make it possible to include the merger segment of 131113 coalescence in the search for and characterization of gravitational wave signals. The implications for LISA include an increase in the event rate due to the increase in achievable signal-to-noise ratio, as well as potentially improved accuracy regarding the extraction of the source parameters. We investigate the degree to which mergers improve parameter estimation, by studying the impact of including mergers on achievable parameter accuracy over a significant range of masses and mass ratios for nonspinning systems, and its impact on LISA science.

McWilliams, Sean T.↗

NASA NTRS2018

Two-Dimensional Planetary Surface Landers

We proposed to develop a new landing approach that significantly reduces development time and obviates the most complicated, most expensive, and highest-risk phase of a landing mission. The concept is a blanket- or carpet-like two-dimensional (2D) lander (~1-m × 1-m surface area and <1-cm thick) with a low mass/drag ratio, which allows the lander to efficiently shed its approach velocity and provide a more robust structure for landing integrity. The form factor of these landers allows dozens to be stacked on a single spacecraft for transport and distributed en masse to the surface. Lander surfaces will be populated on both sides by surface-mount, low-profile sensors and instruments, surface-mount telecom, solar cells, batteries, processors, and memory. Landers will also incorporate thin flexible electronics, made possible in part by printable electronics technology. The mass and size of these highly capable technologies further reduces the required stiffness and mass of the lander structures to the point that compliant, lightweight, robust landers capable of passive landings are possible. This capability avoids the costly, complex use of rockets, radar, and associated structure and control systems. This approach is expected to provide an unprecedented science payload mass to spacecraft mass ratio of approximately 80% (estimated based on current knowledge). This compared to ~1% for Pathfinder, ~17% for MER, and 22% for MSL rovers. Clearly, one difference is rovers vs. a lower capability lander. An outcome of the Phase I study is a clear roadmap for near-term demonstration and long-term technology development.

Landers↗

NASA NTRSDate not supplied

Multicriterion Design Methods for Aerospace Systems

taguchi methods↗

NASA NTRS1985

Optical and UV spectroscopy of the peculiar RS CVn system, RT Lacertae

Spectra in the H-alpha and H-beta regions of the peculiar double-lined RS CVn binary, RT Lacertae, were obtained in the fall of 1984. Limited International Ultraviolet Explorer (IUE) long wavelength low and high resolution spectra were obtained concurrently. The ground based spectra have shown an asymmetry with orbital phase in the H-alpha profile. The H-beta profiles were consistent with the same effect. One hemisphere showed excess emission and the other excess absorption, with a broad Gaussian emission component superposed upon the excess H-alpha line. An improved radial velocity curve, giving a better determined mass ratio and geometry was derived. This combined with the radii implied by the rotational broadening of the spectra, showed one component to be 80 to 90% filling the equilibrium Roche surface. The two-faced nature is, therfore, very likely due to mass transfer from the contact component impacting upon its companion. Low resolution ultraviolet data showed that the supposed cooler component is bluer than its companion. High resolution ultraviolet data taken during secondary eclipse showed Mg II emission strength which decreased more slowly than the area visible. The phase behavior of the low resolution data support the former situation, indicating traditional chromospheric activity.

Huenemoerder, D. P.↗

NASA NTRS2003

The Growth of Central Black Hole and the Ionization Instability of Quasar Disk

A possible accretion model associated with the ionization instability of quasar disks is proposed to address the growth of the central black hole harbored in the host galaxy. The evolution of quasars in cosmic time is assumed to change from a highly active state to a quiescent state triggered by the S-shaped ionization instability of the quasar accretion disk. For a given external mass transfer rate supplied by the quasar host galaxy, ionization instability can modify accretion rate in the disk and separates the accretion flows of the disk into three different phases, like a S-shape. We suggest that the bright quasars observed today are those quasars with disks in the upper branch of S-shaped instability, and the faint or 'dormant' quasars are simply the system in the lower branch. The middle branch is the transition state which is unstable. We assume the quasar disk evolves according to the advection-dominated inflow-outflow solutions (ADIOS) configuration in the stable lower branch of S-shaped instability, and Eddington accretion rate is used to constrain the accretion rate in each phase. The mass ratio between black hole and its host galactic bulge is a nature consequence of ADIOS. Our model also demonstrates that a seed black hole (BH) similar to those found in spiral galaxies today is needed to produce a BH with a final mass 2 x 10(exp 8) solar mases.

Lu, Ye↗