Search NASA⌕ Search

SEARCH · Search NASA

Results for “MATERIALS PROCESSING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15

Real time monitoring of the chemistry of hydroxylamine nitrate and iron as surrogates for nuclear materials processing

The separation of actinides in aqueous solution often involves changes in redox chemistry achieved by reagents such as hydroxylamine nitrate (HAN). As a result, in situ monitoring of the chemistry of HAN in contact with plutonium and neptunium in concentrated nitric acid at 35°C is important for the efficacy of Pu-238 extraction. A spectroscopic method of following the chemistry of HAN in contact with iron (as a simulant for plutonium) was developed, using a quantum cascade laser-attenuated total reflectance (QCL-ATR) system. The mid-infrared (3.67–12.5 μm) was chosen for its ability to distinguish the molecular vibrations of analytes and exclude the background absorption of the concentrated HNO 3 matrix. The concentrations of chemical species found in the reaction were drawn from the collected QCL power data using Beer’s law after a baseline correction. These data were qualitatively compared to a kinetic rate model based on a simplified reaction mechanism. The QCL-ATR method can help assess the areas of stability of HAN, nitrate/nitrite interactions, and assist process control of actinide separations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Actinide Material Processing & Power (AMPP) Newsletter: November 2019

AMPP is known for excellence in our NNSA and DOE missions as well as our operations that support those missions. Excellence in mission operations requires the execution of sustained operations that are reliable and responsive to mission needs across all work being performed in AMPP. For all of us here at TA-55, adherence to the Principles of Conduct of Operations is essential to achieving a safe and productive environment that enables excellence across the board. AMPP is a complex organization, with hazards ranging from radiological to electrical to chemical, and a footprint that extends to other areas of the Laboratory outside of TA-55. Excellence in mission operations is essential to the success of all of our programs. Highlights of our outstanding operational work that benefit our ability to deliver on mission are featured in this issue.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Energy Efficient Material Processing through Automated Process Monitoring and Controls

Smart manufacturing is bound to play a crucial role in reducing global energy consumption while accelerating economic development. This phenomenon is evident in advanced sensing technology developments, data analytics and machine learning/AI, automated controls, cloud computing, etc. The immediate opportunity for smart manufacturing is to improve the energy efficiency of manufacturing operations through innovations in processes and controls. The manufacturing industry still consumes about 30% of total global energy production, which is significant. This program focused on the recommendation of heterogeneous sensors to monitor the Chemical Vapor Infiltration (CVI) process parameters, states, and key performance indices and utilize cloud computing to sort and analyze the real-time data. Learning through data analytics helps guide the control parameters affecting energy usage. The target process in the program is the CVI process at the Honeywell South Bend facility, which is one of the most energy-intensive manufacturing industries.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Assessment of Potential Ergonomic Injury Risk in the Nuclear Material Processing Glovebox Environment [Capstone Project]

Gloveboxes are isolation barriers that are used within many different industries such as pharmaceuticals, electronic parts fabrication, nuclear, and biological. The research on glovebox ergonomics is currently limited with few ergonomic professionals that focusing exclusively on glovebox working environments. There is existing documentation on occupational injuries, such as musculoskeletal disorders (MSD), sustained as a direct result of working in gloveboxes. The main elements that pose ergonomic risks to glovebox workers are operational repetition, duration, force, vibration, lifting heavy (more than 15lbs with two hands) objects, and awkward postures. This paper examines a small sample of the potential causal or risk factors that lead to the ergonomic injuries. A meta-analysis utilizing a random effect model is used to examine data from several studies which focus on, dexterity and strength changes as result of glove thickness, and robotic assistive technology as a means to improve postural mechanics. With the meta-analysis technique, similar data sets from different research studies can be coalesced into a single weighted, statistically significant result for subsequent consideration. The results from the analysis show that increased glove thickness results in decreased dexterity for operators thus increasing ergonomic risk factors such as task duration. It is also shown that glove thickness decreases grip strength but a similar decrease in pinch strength is not definitively demonstrated. With decreased grip strength, operators will need to exert more force (a known ergonomic risk factor) on processing tools, etc. during operations thus increasing the risk of ergonomic injury. The use of robotic assistive technology as a means to improve operator posture (risk factor) was also examined. Although it may be intuitively assumed that human-robotic collaboration would be beneficial in reducing risk factors, the result from this study’s analysis was not statistically significant. It is inferred that with additional directed research on this topic another study/analysis could be statistically significant demonstrating the benefits of the technology.

99 GENERAL AND MISCELLANEOUS↗

Toward Automated Plasma Focus Ion Beam Instrument Calibration for Materials Processing [Poster]

To accelerate the transition to autonomous focused ion beam (FIB) microscopy, we require an objective figure of merit (FOM) for assessing calibration. For our purposes, these FOMs related to beam astigmatism, quad, and focus. Intelligent calibration integrated into scripted workflows will enable fully automated sample preparation workflows that produce higher quality samples with less operator time.

97 MATHEMATICS AND COMPUTING↗

Methods of measurement for semiconductor materials, process control, and devices

Significant accomplishments include development of a procedure to correct for the substantial differences of transistor delay time as measured with different instruments or with the same instrument at different frequencies; association of infrared response spectra of poor quality germanium gamma ray detectors with spectra of detectors fabricated from portions of a good crystal that had been degraded in known ways; and confirmation of the excellent quality and cosmetic appearance of ultrasonic bonds made with aluminum ribbon wire. Work is continuing on measurement of resistivity of semiconductor crystals; study of gold-doped silicon, development of the infrared response technique; evaluation of wire bonds and die attachment; and measurement of thermal properties of semiconductor devices, delay time and related carrier transport properties in junction devices, and noise properties of microwave diodes.

Bullis, W. M.↗

Research study of materials processing in space Experiment M512

Ground based studies of two proposed experiments which were to be conducted aboard the Skylab Laboratory are reported; metals melting experiment, and sphere forming experiment. These studies were conducted with the objectives of clarifying the effects of gravity and optimizing the experiments within the constraints of existing hardware. All process phenomena were considered, with particular attention given to adhesion-cohesion studies with emphasis on the fluid dynamics of the molten metal. Detailed thermal histories were generated for three-dimensional specimen geometry including radiation, conduction and vaporization losses with allowances for variable properties. In addition quantitative techniques were used to establish the gravitational level (magnitude and direction) for KC-135 aircraft flights and the actual Skylab mission for both experiments.

Brashears, M. R.↗

Research study on materials processing in space experiment M512

A study program was conducted to clarify the role of gravity in the fluid mechanics of certain molten metal processes of potential significance to manufacturing in space. In particular, analyses were conducted of the M551 Metals Melting Experiment and the M553 Sphere Forming Experiment to be conducted in the M512 Facility onboard Skylab. The M551 experiment consisted of a study of electron beam welding of various metals, and the M553 experiment studied the formation of molten metal spheres by free-floating in a near zero-gravity environment. The analyses of these experiments and a comparison with ground-based and KC135 experimental results are presented.

Brashears, M. R.↗

Research study on materials processing in space, M566 experiment

Specimens of the aluminum-33 wt% copper eutectic partially melted and resolidified in the low effective gravity of the orbiting Skylab were examined and characterized with respect to microstructural defects and thermal conductivity values. The results obtained were compared with similar evaluations of ground-based simulation melt-resolidification experiments and as-prepared unidirectionally solidified specimens. Thermal conductivity data and electrical resistivity data at temperatures from 25 C to 400 C did not show significant differences between ground and space processed specimens. A methology of evaluating the defects in the Al-Al2Cu structure was implemented. A specimen from Skylab 3 showed signs of instability in growth and several grains were found in the ingot. The specimen from Skylab 4 did not show such marked instability in growth and was found to contain fewer defects than the ground-processed specimens. This agrees with data from Georgia Institute of Technology which showed that there were fewer defects in both their Skylab 3 and 4 specimens than in ground processed specimens.

Douglas, F. C.↗

Research study on materials processing in space Skylab experiment M553 - sphere forming

A research program was conducted to study the solidification of metals in the form of small spheres both in the one gravity environment of the earth laboratory and the low gravity environment of KC-135 trajectory flights and the Skylab 1/2 mission. The program had three phases. The details of the results of this program are contained in interim reports prepared at the conclusion of each of the three phases. This final report is intended to summarize the efforts and results described in detail in each of these interim reports, with particular emphasis on the differences observed between the ground-based and Skylab flight specimens.

Johnson, P. C.↗

Materials processing in space M512, phase B report

The metallographic characterization, analysis, and property measurement of ground samples for comparison with those processed on Skylab are described. Experiments on metals melting and exothermic brazing are summarized, and results are presented.

Pattee, H. E.↗

Research study on materials processing in space experiment M512

A study program was conducted to clarify the role of gravity in the fluid mechanics of certain molten metal processes of potential significance to manufacturing in space. In particular, analyses were conducted of the M551 Metals Melting Experiment and the M553 Sphere Forming Experiment to be conducted in the M512 Facility onboard Skylab. The M551 experiment consisted of a study of electron beam welding of various metals, and the M553 experiment studied the formation of molten metal spheres by free-floating in a near zero-gravity environment. The analyses of these experiments and a comparison with ground-based and KC135 experimental results are presented.

Brashears, M. R.↗