Search NASA⌕ Search

SEARCH · Search NASA

Results for “Nuclear data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Nuclear data for reactor production of 131 Ba and 133 Ba

The newest radioisotope for brachytherapy treatment of prostate cancer is 131 Cs (t 1/2 = 9.69 d, 100% EC). Generated via electron capture decay of 131 Ba (t 1/2 = 11.6 d, 100% EC), 131 Cs has been used in brachytherapy for prostate cancer since 2004. The 131 Ba parent is produced through neutron capture of enriched 130 Ba in a nuclear reactor. For large-scale production of 131 Ba, an accurate knowledge of production and burnup cross sections of 131 Ba are essential. Here, we report two group cross sections (thermal and resonance integrals) for 130 Ba and 131 Ba and a new measure of the half-life of 131 Ba. Targets consisting of milligram quantities of enriched 130Ba (~35%) were irradiated in Oak Ridge National Laboratory's High Flux Isotope Reactor at thermal and resonance neutron fluxes of (1.9–2.1) × 10 15 and (5.8–7.0) × 10 13 neutrons·cm -2 s -1 , respectively, for durations ranging from 3 to 26 days. In addition, cadmium covered samples of 130 Ba were irradiated for 1 hour at 12.6% full reactor power (10.7 MW). The yield of 131 Ba approaches a saturation value of ~60 GBq (~1.6 Ci) per mg of 130 Ba for 20 days irradiation at a thermal neutron flux of 1.8 × 10 15 n·s -1 ·cm -2 , with a thermal/epithermal ratio of ~30. Under the above experimental conditions, the two group cross sections of 130 Ba are 6.9 ± 0.5 b (thermal, σ 0 ) and 173 ± 7 b (resonance, I 0 ). These values represent the sum of cross sections to metastable and ground states of 131 Ba. For 131 Ba, the empirically measured thermal cross section is 200 ± 50 b assuming an I 0 /σ 0 of 10. This cross section is reported for the first time. Further, the half-life of 131 Ba was remeasured to be 11.657 ± 0.008 d. Lastly, this study also resulted in the co-production of 133 Ba (t 1/2 = 10.52 y, 100% EC). The experimental yield of 133 Ba is ~370 MBq (~10 mCi) per mg of 132 Ba (thin target) for one cycle irradiation in the High Flux Isotope Reactor, and measured two-group 132 Ba cross sections are 7.2 ± 0.2 b and 39.9 ± 1.3 b. These values also represent the sum of cross sections to metastable and ground states of 133 Ba.

62 RADIOLOGY AND NUCLEAR MEDICINE↗
DOE OSTI2023

Nuclear Data Sheets for A=251

Here, the experimental reaction and decay studies producing nuclei in the A=251 mass chain have been reviewed. Data on elements from uranium (Z=92) to nobelium (Z=102) are included, and level and decay schemes are presented for these nuclides. This work supersedes the previous evaluation for this mass chain (2013Br09).

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2021

Overview of the NCSP Nuclear Data Program [Slides]

The mission of the NCSP is to provide sustainable expert leadership, direction and the technical infrastructure necessary to develop, maintain and disseminate the essential technical tools, training and data required to support safe, efficient fissionable material operations within the Department of Energy. The vision of the NCSP is to create a continually improving, adaptable and transparent program that communicates and collaborates globally to incorporate technology, practices and programs to be responsive to the essential technical needs of those responsible for developing, implementing and maintaining nuclear criticality safety.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2020

Nuclear Data Sheets for A=233

The present evaluation of the known A=233 nuclides ( 233 Fr, 233 Ra, 233 Ac, 233 Th, 233 Pa, 233 U, 233 Np, 233 Pu, 233 Am, 233 Cm) and 233 Bk represents an update and revision, after 15 years of the previous evaluation of A=233 published by B. Singh and J.K. Tuli (2005Si15). Laboratory identification of 233 Bk nuclide is still considered as tentative. Various decay and reaction data are evaluated and compared. Adopted data, levels, gammas, level half-lives, spins, parities, and configuration assignments are provided. For 233 Fr, 233 Ra, 233 Ac, 233 Pu, 233 Am and 233 Cm, information is available for the respective ground states only. The decay schemes from β - decays of 233 Fr and 233 Ra, and from ε decay of 233 Am and 233 Cm are unknown, while those from β - decay of 233 Ac, and from ε decay of 233 Np are considered incomplete. The α decay of 237 Np to 233 Pa has been studied in detail by many investigators, yet the decay scheme is considered incomplete as several very low-energy transitions are involved, without the knowledge of their intensities, resulting in mismatch of directly measured α feedings and those deduced from γ-transition intensity balances. The decay schemes from α decays of 237 Am, 237 Cm and 237 Cf to respective A=233 daughters are considered incomplete. Particle-transfer and high-spin data are available for 233 Th, 233 Pa and 233 U nuclei, which remain the most extensively studied in this mass chain. However, data for half-lives for the excited states are available only for one level in 233 Pa, and for five levels in 233 U, thus limiting the knowledge of reduced transition probabilities in this mass chain.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2020

Nuclear Reaction Data Evaluations for Nuclear Applications Physics and modeling [Slides]

This presentation provides an evaluation workflow scheme for the project. It also discusses nuclear data libraries, including an overview of worldwide nuclear data libraries and current funding agencies. The presentation also discusses the theoretical framework commonly used in the evaluated work, including the R-matrix theory (≈ up to a few keVs for heavy nuclei) as well as pre-equilibrium (PE) and Hauser-Feshbach (HF) theory (⪆1 MeV for medium/heavy nuclei). Inclusion of experimental effects are also discussed. Examples of evaluated work, including theory, experiments, and applications are discussed, specifically n+ 28,29,30 Si evaluation (direct capture component), n+ 53 Cr evaluation (strong multiple scattering effects), n+ 239 Pu(n,γf) reaction (fluctuations in neutron multiplicities), and α+ 17,18 O evaluations (emerging neutron spectra).

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2023

Nuclear Data Evaluations in the Resolved Resonance Region and Proposed Updates to R­matrix Modeling in the SAMMY Code [Slides]

This detailed presentation starts off with an evaluation workflow scheme along with observables definition. Provided next are typical cases of explicit experimental effects and the basic quantities for reproducibility. Lastly the presentation mentions the Inverse channel, Complex radius, and the level­ dependent boundary condition. A visual workflow scheme is provided.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2026

Integral Nuclear Data and Benchmarking Needs for Fusion Energy Systems

Fusion energy systems are currently being designed and optimized using radiation transport codes. To deal with the unique environment inside a fusion-based system, many of these designs incorporate novel materials able to withstand the high radiation fields, ensure adequate cooling and thermal protection, and produce tritium. Validation plays a vital role in building trust in the predictive power of these models and computational methods. Validation of a code consists of modeling documented real-world experiments and comparing the code-predicted response to the measured response. Adequate validation requires measured responses from real-world experiments, also known as integral data, that mimic the system being designed, including materials, impinging radiation, and temperature, among other variables. The most trusted integral data are experimental responses that have been through a rigorous benchmarking process that develops a recommended computational model and evaluates all experimental uncertainties. Finally, there are a few research groups around the world that have been producing integral data for fusion applications, but a substantial investment is needed to address the unique validation needs of the fusion community.

Fusion↗
DOE OSTI2019

Generation of Multigroup Multiband Nuclear Data

Historically, deterministic pre-processing methods have been used for generating multigroup (MG) and multigroup multiband (MGMB) cross sections. These deterministic methods require an assumption of the shape for the scalar ux. There has been increasing interest in utilizing Monte Carlo transport as a method to generate these cross sections since the energy self-shielding and resonance overlap are fully accounted for. The purpose of this project is to implement and test the capability of generating these cross sections in Mercury.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗