Search NASA⌕ Search

SEARCH · Search NASA

Results for “REFRACTORY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15

A refractory glass chondrule in the Vigarano chondrite

Vigarano, a type 3 carbonaceous chondrite, contains a chondrule composed of highly refractory Ca- and Al-rich glass with minor spinel. The chondrule formed from material similar to the Ca-, Al-, Ti-rich aggregates that are common in Vigarano and other type 3 chondrites and formation of these refractory aggregates must predate formation of some Vigarano chondrules. Experiments with synthetic analogs and a comparison with studies in the system CaO-MgO-Al2O3-SiO2 indicate a temperature for formation of the chondrule at or above 1700 C followed by very rapid cooling.

Reid, A. M.↗

Effects of high temperature and e-beam irradiation on the stability of refractory thin films

Refractory thin films of Al2O3, ZrO2, MgO, ThO2, and BN have been investigated in situ in an UHV transmission electron microscope. The electron transparent refractory films were prepared by electron-beam evaporation, anodization, RF sputtering, and thinning of bulk crystal materials. The study concentrates on monitoring the thermal and mechanical stability of the films, phase and structural changes, and electron irradiation effects as a function of film-preparation conditions. With increasing temperatures, five different crystallographic phases were observed for both anodized and electron-beam-evaporated alumina films. Zirconia films exhibited two phase transitions upon heating to 1200 C and electron-irradiation-induced crystallization of ZrO2 even at room temperature. MgO, ThO2, and BN films did not undergo any noticeable phase transformation but ruptured due to sintering below 1200 C.

Lee, E. H.↗

Compatibility Studies of Various Refractory Materials in Contact with Molten Silicon

The production of low cost, efficient solar cells for terrestrial electric power generation involves the manipulation of molten silicon with a present need for noncontaminating, high temperature refractories to be used as containment vessels, ribbon-production dies, and dip-coated substrates. Studies were conducted on the wetting behavior and chemical/physical interactions between molten silicon and various refractory materials.

Odonnell, T.↗

Fibrous refractory composite insulation

A refractory composite insulating material was prepared from silica fibers and aluminosilicate fibers in a weight ratio ranging from 1:19 to 19:1, and about 0.5 to 30% boron oxide, based on the total fiber weight. The aluminosilicate fiber and boron oxide requirements may be satisfied by using aluminoborosilicate fibers and, in such instances, additional free boron oxide may be incorporated in the mix up to the 30% limit. Small quantities of refractory opacifiers, such as silicon carbide, may be also added. The composites just described are characterized by the absence of a nonfibrous matrix.

Leiser, D. B.↗

Refractory-element-rich inclusions in CM meteorites

Refractory-element-rich inclusions of a variety of types occur in CM meteorites. Based on detailed study of Murchison and more limited investigations of Murray, Nogoya, Cold Bokkeveld and Mighei, the most common of these inclusions are small spinel-hibonite bodies rimmed with diopside. Bulk chemical compositions are estimated to be approximately 67% Al2O3, 21% MgO, 5.5% CaO, 5.5% TiO2, and 1% SiO2. Although this chemical composition does not agree closely with current theoretically predicted compositions of early condensate assemblages, the inclusions have many features which suggest that they are indeed early condensates. These include texture, mineralogical composition, sequence of minerals and magnesium isotopic composition of hibonite. The CM refractory inclusions exhibit several differences from those observed in Allende and other CV meteorites. These probably record variations in time, place or physical conditions of origin for the two cases.

Macdougall, J. D.↗

Primordial refractory metal particles in the Allende meteorite

Refractory metal particles containing Os, Re, W, Mo, Ir, and Ru were observed in a Ca-Al-rich inclusion in the Allende meteorite. These particles are the closest to unaltered primordial metal condensates from a nebula yet reported, and appear to have been isolated from the nebula before the condensation of refractories was complete. Computer calculations of condensation indicate that the temperature of isolation appears to be close to the calculated temperature of first formation of oxides (about 1620 K at 0.0001 atm) indicating that isolation may have been effected by coating of the particles by oxides.

Blander, M.↗

Prolonging the Life of Refractory Fillers

Useful life of refractory glass-cloth gap filler is increased by coating it with a suspension of silicon carbide in butanol and polyethylene. Coating is applied to refractory-fiber cloth filler that seals gaps between insulating tiles on Space Shuttle orbiter. Tests showed that cloth fibers would be embrittled by extreme temperatures encountered on reentry into Earth's atmosphere and that only 25 percent of the thousands of fillers would be reusable after a mission. With coating, 85 percent of fillers would be reusable.

Schomburg, C.↗

Prolonging the Life of Refractory Fillers

Useful life of a refractory glass cloth gap filler is increased by coating it with a suspension of silicon carbide in butanol and polyethylene. Coating is applied to the refractory filler that seals gaps between insulating tiles on the Space Shuttle orbiter. Silicon carbide coating prevents embrittlement at high temperatures such as those encountered on reentry into Earth's atmosphere.

Schomburg, C.↗

Refractory spherules in the Murchison meteorite - Are they condrules

The textural and mineralogical features of refractory spherules found in the Murchison meteorite are examined in relation to their probable origin. Based on a study of 12 samples it is found that the refractory spherules, with hibonite-bearing or spinel or spinel-perovskite cores surrounded by an iron-rich silicate layer, have compositions similar to those of coexisting irregular inclusions. The shape and internal textures of the spherules, however, suggest formation from a liquid. It is proposed that the spherules may be melted equivalents of the irregular inclusions, and thus may be properly termed chondrules. It is noted that such melting would have involved very high temperatures.

Macdougall, J. D.↗

Reliability study of refractory gate gallium arsenide MESFETS

Refractory gate MESFET's were fabricated as an alternative to aluminum gate devices, which have been found to be unreliable as RF power amplifiers. In order to determine the reliability of the new structures, statistics of failure and information about mechanisms of failure in refractory gate MESFET's are given. Test transistors were stressed under conditions of high temperature and forward gate current to enhance failure. Results of work at 150 C and 275 C are reported.

Yin, J. C. W.↗

Abundances of refractory elements in quasars

A comparison of previous and new observations of iron, silicon, aluminum, magnesium and carbon lines in quasars with theoretical models shows that the gas-phase abundances of these refractory elements cannot be much less than solar, and that they do not show the order-of-magnitude depletions that are found in planetary nebulae and the interstellar medium. In light of this lack of refractory element depletions, it is suggested that the broad emission-line clouds must be devoid of dust.

Gaskell, C. M.↗

Method of repairing surface damage to porous refractory substrates

A damaged porous refractory material coated with a glass coating is repaired by applying hydrolyzed tetraethyl orthosilicate to the damaged area and curing it. A pliable filler comprised of hydrolyzed tetraethyl orthosilicate and powdered refractory substrate is then applied to the area which is then heated.

Ecord, G. M.↗

Influence of deflocculant on the isoelectric point of refractory powders: Considerations on the action of deflocculant

Isoelectric point changes in suspensions of refractory materials vis-a-vis the role of deflocculants used in monolithic refractories were investigated by considering the mineral compositions and adsorbed ions in four kinds of clay. Three types of curves represented the relation between the isoelectric point and the deflocculant. The surface charge of clay particles in the suspensions became negative as a result of the deflocculant, since the isoelectric point of suspensions decreased as the deflocculant was added. The isoelectric point changes of calcined alumina were also compared with those of the clays, and a similar phenomenon was observed, except that the deflocculant dispersed the calcined alumina better than it did the clays. A simple model was used to analyze the results.

Naruse, Y.↗

Chemical compositions of refractory inclusions in the Murchison C2 chondrite

Neutron activation has been used to analyze samples from ten refractory inclusions in Murchison for 36 elements. Two inclusions, BB-5 and MUCH-1, have large negative Yb anomalies unaccompanied by correspondingly large and negative Eu anomalies; six inclusions have group II or III patterns, or variants of such patterns. The frequency of highly fractionated REE patterns, and the absence of group I patterns, suggest that refractory inclusions in Murchison stopped equilibrating with the nebular gas at higher temperatures than most Allende coarse grained inclusions. Murchison inclusions tend to be lower in nonrefractory elements than Allende coarse grained inclusions, further suggesting that, on average, the former underwent less severe secondary alteration than the latter.

Ekambaram, V.↗

Does nucleation theory apply to the formation of refractory circumstellar grains?

It is pointed out that kinetic factors inherent in cosmic systems will prevent the attainment of an approximate equilibrium precondensation cluster distribution, and that therefore such systems will violate one of the most fundamental assumptions of nucleation theory. More importantly, it is shown that of the 11 refractory metal/metal oxide systems which have been studied experimentally none are consistent with the predictions of either classical nucleation theory or the Lothe-Pound modification. Since no valid method is known by which these deficiencies can be circumvented, it is concluded that nucleation theory cannot be made to work in expanding circumstellar shells. However, a stochastic, kinetic treatment which makes use of experimental and theoretical data for specific refractory systems does appear to be feasible.

Donn, B.↗

The need for isotopic data on refractory elements in the solar wind

The Sun accounts for the bulk of material in the solar system. Information on the isotopic composition of elements in the solar wind is therefore essential for an understanding of the contribution made by each nucleogenetic component that has been identified in meteorites. Recent work suggests that isotopic data on the solar wind may also help us to understand the physical process that is concentrating light elements at the solar surface. Refractory and volatile elements would behave alike under the conditions of solar fractionation. Prolonged exposure of foils at 1AU from the sun would be a relatively inexpensively way to collect the quantity of solar wind implanted refractory elements needed to test this hypothesis.

Manuel, O. K.↗

The abundance and relative volatility of refractory trace elements in Allende Ca,Al-rich inclusions - Implications for chemical and physical processes in the solar nebula

The relative volatilities of lithophile refractory trace elements (LRTE) were determined using calculated 50-percent condensation temperatures. Then, the refractory trace-element abundances were measured in about 100 Allende inclusions. The abundance patterns found in Allende Ca,Al-rich inclusions (CAIs) and ultrarefractory inclusions were used to empirically modify the calculated LRTE volatility sequence. In addition, the importance of crystal-chemical effects, diffusion constraints, and grain transport for the origin of the trace-element chemistry of Allende CAIs (which have important implications for chemical and physical processes in the solar nebula) is discussed.

Kornacki, Alan S.↗

Refractory minerals in interplanetary dust

A newly studied interplanetary dust particle contains a unique set of minerals that closely resembles assemblages in the refractory, calcium- and aluminum-rich inclusions in carbonaceous chondrite meteorites. The set of minerals includes diopside, magnesium-aluminum spinel, anorthite, perovskite, and fassaite. Only fassaite has previously been identified in interplanetary dust particles. Diopside and spinel occur in complex symplectic intergrowths that may have formed by a reaction between condensed melilite and the solar nebula gas. The particle represents a new link between interplanetary dust particles and carbonaceous chondrites; however, the compositions of its two most abundant refractory phases, diopside and spinel, differ in detail from corresponding minerals in calcium- and aluminum-rich inclusions.

Christoffersen, Roy↗