SEARCH · Search NASA

Results for “binary cycle”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15

All sources NASA NTRS DOE OSTI

DOE OSTI2019

Tin Nitride Atomic Layer Deposition Using N2H4

There is substantial lag in the development of atomic layer deposition (ALD) processes for nitrides compared to the high-quality, conformal oxides for which ALD has become the standard. A major factor in this disparity is the ready availability of highly reactive oxygen sources (mainly H2O, O2, and H2O2). High-energy nitrogen precursors are similarly required for the efficient incorporation of nitrogen in a film. Ammonia has often been used in conjunction with metal chlorides but requires relatively high temperatures for thermal ALD. Plasma-enhanced ALD can utilize molecular nitrogen as a precursor but can reduce film conformality on complex supports and damage the underlying substrate. Hydrazine (N2H4) is an alternative precursor which has been rarely explored for the fabrication of nitrides in ALD, but which is experiencing a surge in popularity due to its high reactivity, which enables the deposition of nitrides as-yet undemonstrated by ALD.(1) The added reactivity and volatility of liquid hydrazine may enable new reaction mechanisms, lower deposition temperatures, and conformality for high aspect ratio applications. Sn3N4 is a metastable semiconductor which shares a crystal structure with its analog, Si3N4; unlike Si3N4, Sn3N4 has only recently been grown by ALD,(2) being synthesized much more often through reactive sputtering.(3) As a binary, Sn3N4 has applications as a battery anode material, for photoelectrochemistry, and optoelectronic devices. We will report progress on the deposition of SnxNy films from tetrakis(dimethylamido) tin (TDMASn) and N2H4. Growth per cycle of this material (determined by x-ray reflectivity) is 0.4 A at 200 C, similar to the sole report of Sn3N4 from PE-ALD,(2) despite films being substantially Sn-rich. Identification of ALD growth window and self-limiting deposition characteristics are underway; initial testing indicates a competing chemical vapor deposition process which can be eliminated with adequate tuning of pulse/purge characteristics. A comparison of film conductivity and optical absorption at different growth temperatures will be presented. General issues of N2H4 purity and routes to prevent or control oxynitride formation will be discussed. (1) Du, L., et al. The First Atomic Layer Deposition Process for FexN Films. Chem. Comm., 2019, ASAP. DOI: 10.1039/C8CC10175B. (2) Stewart, D. M., et al. Tin Oxynitride Anodes by Atomic Layer Deposition for Solid-State Batteries. Chem. Mater. 2018, 30, 2526-34. (3) Caskey, C. M., et al. Semiconducting Properties of Spinel Tin Nitride and Other IV3N4 Polymorphs. J. Mater. Chem. C 2015, 3, 1389-96.

14 SOLAR ENERGY↗

DOE OSTI2024

Significant Improvements to Si Calendar Lifetime Using Rapid Electrolyte Screening via Potentiostatic Holds

Silicon-based lithium-ion batteries exhibit severe time-based degradation resulting in poor calendar lives. This has been identified as the major impediment towards commercialization with cycle life considered a solved issue through nanosizing and protective coatings allowing over 1000 cycles of life to be achieved. In this work, rapid screening of sixteen electrolytes for calendar life extension of Si-rich systems (70 wt% Si) is performed using the voltage hold (V-hold) protocol. V-hold significantly shortens the testing duration over the traditional open circuit voltage reference performance test allowing us to screen electrolytes within a span of two months. We find a novel ethylene carbonate (EC) free electrolyte formulation containing lithium hexafluorophosphate (LiPF 6 ) salt, and binary solvent mix of fluoroethylene carbonate (FEC), ethyl methyl carbonate (EMC) that extends calendar life of Si cells as compared to conventional EC based electrolyte. Our coupled experimental-theoretical analysis framework provides a decoupling of the parasitic currents during V-hold, allowing us to extrapolate the capacity loss to predict semiquantitative calendar lifetimes. Subsequently, cycle aging and oxidative stability tests of the EC free system also show enhanced performance over baseline electrolyte.

25 ENERGY STORAGE↗

NASA NTRS1973

Regulated dc-to-dc converter for voltage step-up or step-down with input-output isolation

A closed loop regulated dc-to-dc converter employing an unregulated two winding inductive energy storage converter is provided by using a magnetically coupled multivibrator acting as duty cycle generator to drive the converter. The multivibrator is comprised of two transistor switches and a saturable transformer. The output of the converter is compared with a reference in a comparator which transmits a binary zero until the output exceeds the reference. When the output exceeds the reference, the binary output of the comparator drives transistor switches to turn the multivibrator off. The multivibrator is unbalanced so that a predetermined transistor will always turn on first when the binary feedback signal becomes zero.

Feng, S. Y.↗

DOE OSTI2018

A model suite of green algae within the Scenedesmaceae for investigating contrasting desiccation tolerance and morphology

ABSTRACT Microscopic green algae inhabiting desert microbiotic crusts are remarkably diverse phylogenetically, and many desert lineages have independently evolved from aquatic ancestors. Here we worked with five desert and aquatic species within the family Scenedesmaceae to examine mechanisms that underlie desiccation tolerance and release of unicellular versus multicellular progeny. Live cell staining and time-lapse confocal imaging coupled with transmission electron microscopy established that the desert and aquatic species all divide by multiple (rather than binary) fission, although progeny were unicellular in three species and multicellular (joined in a sheet-like coenobium) in two. During division, Golgi complexes were localized near nuclei, and all species exhibited dynamic rotation of the daughter cell mass within the mother cell wall at cytokinesis. Differential desiccation tolerance across the five species, assessed from photosynthetic efficiency during desiccation/rehydration cycles, was accompanied by differential accumulation of intracellular reactive oxygen species (ROS) detected using a dye sensitive to intracellular ROS. Further comparative investigation will aim to understand the genetic, ultrastructural and physiological characteristics supporting unicellular versus multicellular coenobial morphology, and the ability of representatives in the Scenedesmaceae to colonize ecologically diverse, even extreme, habitats.

Cardon, Zoe G. (ORCID:0000000187257842)↗

DOE OSTI2026

High-spectral-resolution X-Ray Observations of the Evolved Supermassive Stellar Binary System η Carinae: Fe K α Band Profile Revealed with XRISM

The supermassive binary system, η Carinae, is experiencing enormous wind-driven mass loss at a rate unparalleled in the rest of the Galaxy. Their wind–wind collision (WWC) continuously produces shock heated, X-ray-emitting plasmas. The XRISM X-ray observatory observed the system in 2023 and 2024 when the X-ray emission began to increase toward periastron passage in 2025. This paper reports unprecedentedly high-resolution X-ray spectra in the Fe Kα band between 6.2 and 7.1 keV, obtained with the Resolve X-ray microcalorimeter. The hydrogen-like (Lyα) and helium-like (Heα) lines reveal three velocity components. Two of them are broadened with maximum velocities of 2000–3000 km s −1 , likely originating from the postshock companion wind. The other is relatively narrow, with a Gaussian broadening of only ∼290 km s −1 in 1σ, which may originate from the postshock companion wind at the WWC stagnation point or penetrating the primary wind. The Fe fluorescent lines exhibit a moderate blueshift and broadening with velocities at 100–200 km s −1 , consistent with the primary wind’s velocity field. The spectra also confirm a Compton shoulder of the Heα line complex for the first time. Both fluorescing and scattering spectral profiles indicate that the binary system is seen from the companion side during these observations. The flux ratio of the Compton-scattering emission to the fluorescent line suggests substantial hydrogen depletion of the primary wind, expected from CNO-cycled hydrogen nuclear fusion gas.

79 ASTRONOMY AND ASTROPHYSICS↗

DOE OSTI2024

Mixed and membrane-separated culturing of synthetic cyanobacteria-yeast consortia reveals metabolic cross-talk mimicking natural cyanolichens

Metabolite exchange mediates crucial interactions in microbial communities, significantly impacting global carbon and nitrogen cycling. Understanding these chemically-mediated interactions is essential for elucidating natural community functions and developing engineered synthetic communities. This study investigated membrane-separated bioreactors (mBRs) as a novel tool to identify transient metabolites and their producers/consumers in mixed microbial communities. We compared three co-culture methods (direct mixed, 2-chamber mBR, and 3-chamber mBR) to grow a synthetic binary community of the cyanobacterium Synechococcus elongatus PCC 7942 and the fungus Rhodotorula toruloides NBRC 0880, as well as axenic S. elongatus. Despite not being natural lichen constituents, these organisms exhibited interactions resembling those in cyanolichens. S. elongatus fixed CO 2 into sugars as the primary shared metabolite, while R. toruloides secreted various biochemicals, predominantly sugar alcohols, mirroring the metabolite exchange observed in natural lichens. The mBR systems successfully captured metabolite gradients and revealed rapidly consumed compounds, including TCA cycle intermediates and amino acids. Our approach demonstrated that the 2-chamber mBR optimally balanced metabolite exchange and growth dynamics. This study provides insights into cross-species metabolic interactions and presents a valuable tool for investigating and engineering synthetic microbial communities with potential applications in biotechnology and environmental science.

59 BASIC BIOLOGICAL SCIENCES↗

DOE OSTI2017

Insights into the structural effects of layered cathode materials for high voltage sodium-ion batteries

Cathode materials are critical to the energy density, power density and safety of sodium-ion batteries (SIBs). Herein, we performed a comprehensive study to elucidate and exemplify the interplay mechanism between phase structures, interfacial microstrain and electrochemical properties of layered-structured Na x Ni 1/3 Co 1/3 Mn 1/3 O 2 cathode materials for high voltage SIBs. The electrochemical test results showed that Na x Ni 1/3 Co 1/3 Mn 1/3 O 2 with an intergrowth P2/O3/O1 structure demonstrates better electrochemical performance and better thermal stability than Na x Ni 1/3 Co 1/3 Mn 1/3 O 2 with P2/O3 binary-phase integration and Na x Ni 1/3 Co 1/3 Mn 1/3 O 2 where only the P phase is dominant. This result is caused by the distinct interfacial microstrain development during the synthesis and cycling of the P2/O3/O1 phase. In operando high energy X-ray diffraction further revealed that the intergrowth P2/O1/O3 cathode can inhibit the irreversible P2–O2 phase transformation and simultaneously improve the structure stability of the O3 and O1 phases during cycling. Here, we believe that interfacial microstrain can serve as an indispensable bridge to guide future design and synthesis of high performance SIB cathode materials and other high energy battery materials.

25 ENERGY STORAGE↗

DOE OSTI2019

Fatigue-resistant high-performance elastocaloric materials made by additive manufacturing

Elastocaloric cooling, a solid-state cooling technology, displays the latent heat released and absorbed by stress-induced phase transformations. Hysteresis associated with transformation, however, is detrimental to efficient energy conversion and functional durability. Here, we have created thermodynamically efficient, low-hysteresis elastocaloric cooling materials by means of additive manufacturing of nickel-titanium. The utilization of a localized molten environment and near-eutectic mixing of elemental powders has led to the formation of nanocomposite microstructures composed of a nickel-rich intermetallic compound interspersed among a binary alloy matrix. The microstructure allowed extremely small hysteresis in quasi-linear stress-strain behaviors—enhancing the materials efficiency by a factor of four to seven—and repeatable elastocaloric performance over 1 million cycles. Implementing additive manufacturing to elastocaloric cooling materials enables distinct microstructure control of high-performance metallic refrigerants with long fatigue life.

36 MATERIALS SCIENCE↗

NASA NTRS1984

Discovery of a 7.1 hour period and eclipses from MXB 1659-29

A 7.1 hr period has been discovered in the X-ray emission from the 'transient' X-ray burst source MXB 1659-29. Erratic variations in X-ray flux are seen during approximately 25 percent of the 7.1 hr cycle; at the end of this period, a stable dip in the flux occurs. Further analysis indicates that this dip is, in all probability, an eclipse by the companion star in the low-mass binary system. The short (about 15 minute) eclipse duration is used to refine the period determination (7.114104 + or - 0.000168 hr) and to constrain the companion star mass and binary system parameters. The companion star is found to be in the range 0.25-0.9 solar mass; probabilistic arguments and observations of cataclysmic variables with comparable periods indicate that the companion star is most likely less massive than the standard theories would indicate.

Cominsky, L. R.↗

DOE OSTI2023

A reversible perovskite air electrode for active and durable oxygen reduction and evolution reactions via the A-site entropy engineering

The performance of reversible solid oxide electrochemical cells (R-SOECs) is largely hindered by the insufficient electroactivity and poor durability of the bifunctional air electrodes, where the oxygen reduction and evolution reactions (ORR and OER) occur. Here, we report our findings in boosting the electrochemical activity and durability of an air electrode with Pr 0.2 Ba 0.2 Sr 0.2 La 0.2 Ca 0.2 CoO 3-δ (PBSLCC) via an A-site entropy engineering. The PBSLCC electrode shows enhanced oxygen reaction activity and excellent durability compared to binary and ternary double perovskites (PrBaCo 2 O 5+δ and Pr 0.8 Ba 0.8 Ca 0.4 Co 2 O 5+δ , respectively). A low and nearly unchanged area-specific resistance of 0.042Ωcm 2 is achieved at 750 °C during the 225-h stability test. La 0.9 Sr 0.1 Ga 0.8 Mg 0.2 O 3-δ electrolyte-supported cells with the PBSLCC air electrode show remarkable performance at 800 °C, demonstrating a peak power density of 1.2Wcm -2 in the fuel cell mode, and a current density of -1.1 Acm -2 at 1.3 V in the electrolysis mode while maintaining the excellent cycling durability of 228 h at ±0.5 Acm -2 under humidified H 2 (10% H 2 O). A bulk oxygen p-band center model is applied to verify that tailoring of the A-site entropy strongly influences the surface exchange coefficients (k* chem ), leading to higher oxygen reaction activity of PBSLCC than the binary and ternary perovskites. Finally, this study opens a new class of high-entropy perovskites for the rational design of air electrodes for R-SOECs with high activity and durability.

30 DIRECT ENERGY CONVERSION↗

DOE OSTI2025

Fine‐Tuning Li‐Ion Solvation Structure by Enhanced Solvent‐Diluent Interactions for Long‐Cycling Lithium Metal Batteries

Achieving durable lithium (Li) metal anodes in liquid electrolytes remains challenging, primarily due to the instability of the formed solid-electrolyte interphases (SEIs). Modulating the Li-ion solvation structures is pivotal in forming a stable SEI for stabilizing Li metal anodes. Here a strategy is developed to fine-tune the Li-ion solvation structures through enhanced dipole–dipole interactions between the Li-ion-coordinated solvent and the non-Li-ion-coordinating diluent, for creating a stable SEI in the developed binary salt electrolyte. The enhanced dipole–dipole interactions weaken the coordination between Li-ions and the solvents while strengthening the interaction between Li-ions and dual anions, thereby facilitating the Li-ion transport and a robust anion-derived SEI with a distinct bilayer structure. Consequently, the developed electrolyte exhibited exceptional electrochemical performance in high energy-density Li||LiNi 0.8 Mn 0.1 Co 0.1 O 2 (NMC811) cells, with long calendar life, stable cyclability at 1 C, and reliable operation between 25 and −20 °C, and it also demonstrat remarkable cycling stability for a Li||NMC811 pouch cell with projected energy density of 402 Wh kg −1 , maintaining 80% capacity retention over 606 cycles under practical conditions.

25 ENERGY STORAGE↗

DOE OSTI2025

Ternary Potassium‐Bismuth‐Telluride Intermetallic Support Promotes Electrochemical Stability in Potassium Metal Anodes

We employed accumulative roll bonding to fabricate self‐standing metallurgical composite of in situ formed alkaline potassium‐bismuth‐telluride intermetallic K 2 (Bi 2/6 Te 3/6 Vac 1/6 ) embedded in potassium metal. This newly discovered thermodynamically stable potassiophilic crystal, termed “KBT”, is fcc antifluorite with K 2 Te archetype. Symmetric cells achieve 880 h of cycling at 0.5 mA cm −2 and 0.5 mAh cm −2 . Potassium metal battery (KMB) with Prussian blue (PB) cathode in carbonate electrolyte retains 80% capacity after 200 cycles at 1C. In ether‐based electrolyte with organic cathode, it achieves 80% retention after 900 cycles at 2C. Combined synchrotron X‐ray nano‐tomography, cryogenic‐focused ion beam microscopy (Cryo‐FIB) and sputter‐down X‐ray photoelectron spectroscopy (XPS) demonstrate uniform electrodeposits, versus baseline of potassium filaments intermixed with pores and coarse SEI. Binary K 3 Bi‐K and K 2 Te‐K intermetallic supports also provide improved electrochemical performance, albeit to lesser extent. Multiscale simulation provides insight into role of support structure in adatom energetics, film nucleation, early‐stage SEI morphology and interfacial stability.

36 MATERIALS SCIENCE↗

NASA NTRS1976

Orbital precession in Hercules X-1

It is noted that the 35-day X-ray high-low cycle of Her X-1 could be explained in terms of periodic obscuration of the source by a tilted and precessing 'slaved' accretion disk, which would require precession of the mass-shedding star and, consequently, a precessing binary orbit. Four months of Uhuru data obtained in 1972 are analyzed to determine whether the orbital precession can be detected as a Doppler modulation in the arrival times of the 1.24-sec X-ray pulsations. The precession geometry is examined, the test for precession is outlined, and a marginally significant indication of orbital precession in the Hz Her/Her X-1 system is obtained. Possible biases in the analysis are evaluated, and the spin-axis misalignment of HZ Her is estimated from the measured tilt of the orbit.

Deeter, J. E.↗

NASA NTRS1993

The discovery of pulsed iron line emission from Centaurus X-3

We present the first discovery of pulsed iron line emission from an X-ray binary, namely Cen X-3. Compared with the continuum pulsations, the iron line pulsations are shallow (50 percent change in amplitude), smeared (the profile is a single-peaked sinusoid) and phase-shifted (by about half a cycle). We also discuss the constraints on the origin of the line imposed by this discovery and by other observations.

Day, C. S. R.↗

NASA NTRS2017

Precipitation Strengthenable NiTiPd High Temperature Shape Memory Alloys

In binary NiTi alloys, it has long been known that Ni-rich alloys can be heat treated to produce precipitates which both strengthen the matrix against dislocations and improve the behavior of the material under thermal and mechanical cycling. Within recent years, the same effect has been observed in Ni-rich NiTiHf high temperature shape memory alloys and heat treatment regimens have been defined which will reliably produce improved properties. In NiTiPd alloys, precipitation has also been observed, but studies are still underway to define reliable heat treatments and compositions which will provide a balance of strengthening and good thermomechanical properties. For this study, a series of NiTi-32 at.Pd alloys was produced to determine the effect of changing nickeltitanium content on the transformation behavior and heat treatability of the material. Samples were aged at temperatures between 350C and 450C for times up to 100 hours. Actuation type behavior was evaluated using uniaxial constant force thermal cycling (UCFTC) to determine the effect of composition and aging on the material behavior. TEMSEM was used to evaluate the microstructure and determine the types of precipitates formed. The correlation between composition, heat treat, microstructure, and thermomechanical behavior will be addressed and discussed.

Transformation strain↗

DOE OSTI2018

Hybrid component and configuration model for combined-cycle units in unit commitment problem

This letter proposes a novel hybrid component and configuration model for combined-cycle gas turbines (CCGTs) participating in independent system operator (ISO) markets. The proposed model overcomes the inaccuracy issues in the current configuration-based model while retaining its simple and flexible bidding framework of configuration-based models. The physical limitations - such as minimum online/offline time and ramping rates - are modeled for each component separately, and the cost is calculated with the bidding curves from the configuration modes. This hybrid mode can represent the current dominant bidding model in the unit commitment problem of ISOs while treating the individual components in CCGTs accurately. The commitment status of the individual components is mapped to the unique configuration mode of the CCGTs. The transitions from one configuration mode to another are also modeled. Finally, no additional binary variables are added, and numerical case studies demonstrate the effectiveness of this model for CCGT units in the unit commitment problem.

25 ENERGY STORAGE↗

NASA NTRS1989

An interpretation of the line profile variations in the IUE spectrum of the Wolf-Rayet binary Gamma(2) Velorum

An analysis of the variable profiles of the high-temperature resonance lines of Si IV in the IUE spectrum of gamma(2) Vel has made it possible to describe these profiles as a superposition of two different profiles, namely, a P Cygni profile that remains practically stationary throughout the orbital cycle and an absorption profile that moves back and forth with phase. To these two profiles is added a very sharp, strong absorption that ought to arise in the layers of the extended gaseous envelope that merge with the interstellar medium. The absorption that moves back and forth during the system's orbital revolution has been interpreted as suggesting a stream going away from the system at an angle of some 110 deg from the direction of the radius vector joining the Wolf-Rayet star with its companion. Such a stream seems to project upon a dense concentration of matter that is located somewhere in the volume between the two stars and moves away at some -700 km/s, and should result from the collision of the winds from the two components. The high-temperature resonance lines of N V and C IV very likely behave similarly to Si IV.

Brandi, Estela↗

DOE OSTI2017

CO 2 capture in lignin-derived and nitrogen-doped hierarchical porous carbons

Here, nitrogen-doped and hierarchical porous carbons were synthesized from lignin precursor by KOH and NH 3 activation with BET surface area of 1631–2922 m 2 /g. X-ray photoelectron spectroscopy (XPS) revealed 5.6–7.1 at.% nitrogen with predominantly pyridinic, amino and pyrrolic/pyridonic type of functionality. Maximum CO 2 adsorption capacity at 298 K and 273 K and pressure upto 760 torr (1 bar) was found to be 5.48 and 8.6 mmol/g respectively, which is higher than that of majority of nitrogen-doped carbons, reported in literature. Ideal Adsorbed Solution Theory (IAST)-based selectivity for CO 2 /N 2 revealed that selectivity increases with the increase in nitrogen content. IAST calculations were also employed to calculate the binary adsorption isotherms to simulate mixed gas adsorption for CO 2 and N 2 as a function of total pressure and mole fraction of CO 2 in the gas mixture. Continuous CO 2 adsorption-desorption studies for 10 cycles revealed that all the nitrogen-doped carbons retained its working capacity at the end of the cycles. Finally, a breakthrough study for (10/90) CO 2 /N 2 mixture in a dynamic column experiment confirmed a physical separation of the two components. The overall results suggest that nitrogen-doped carbons from lignin can be used as potential adsorbents for CO 2 capture purposes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗