SEARCH · Search NASA

Results for “future of computing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15

All sources NASA NTRS DOE OSTI

DOE OSTI2023

Experiences readying applications for Exascale

The advent of Exascale computing invites an assessment of existing best practices for developing application readiness on the world's largest supercomputers. This work details observations from the last four years in preparing scientific applications to run on the Oak Ridge Leadership Computing Facility's (OLCF) Frontier system. This paper addresses a range of topics in software including programmability, tuning, and portability considerations that are key to moving applications from existing systems to future installations. A set of representative workloads provides case studies for general system and software testing. We evaluate the use of early access systems for development across several generations of hardware. Finally, we discuss how best practices were identified and disseminated to the community through a wide range of activities including user-guides and trainings. We conclude with recommendations for ensuring application readiness on future leadership computing systems.

Gottiparthi, Kalyan↗

NASA NTRS1978

Future requirements and roles of computers in aerodynamics

While faster computers will be needed to make solution of the Navier-Stokes equations practical and useful, most all of the other aerodynamic solution techniques can benefit from faster computers. There is a wide variety of computational and measurement techniques, the prospect of more powerful computers permits extension and an enhancement across all aerodynamic methods, including wind-tunnel measurement. It is expected that, as in the past, a blend of methods will be used to predict aircraft aerodynamics in the future. These will include methods based on solution of the Navier-Stokes equations and the potential flow equations as well as those based on empirical and measured results. The primary flows of interest in aircraft aerodynamics are identified, the predictive methods currently in use and/or under development are reviewed and two of these methods are analyzed in terms of the computational resources needed to improve their usefulness and practicality.

Gregory, T. J.↗

NASA NTRS1984

Application of supercomputers to computational aerodynamics

Computers are playing an increasingly important role in the field of aerodynamics such that they now serve as a major complement to wind tunnels in aerospace research and development. Factors pacing advances in computational aerodynamics are identified, including the amount of computational power required to take the next major step in the discipline. Example results obtained from the successively refined forms of the governing equations are discussed, both in the context of levels of computer power required and the degree to which they either further the frontiers of research or apply to problems of practical importance. Finally, the Numerical Aerodynamic Simulation (NAS) Program - with its 1988 target of achieving a sustained computational rate of 1 billion floating point operations per second and operating with a memory of 240 million words - is discussed in terms of its goals and its projected effect on the future of computational aerodynamics.

Peterson, V. L.↗

DOE OSTI2023

GPU-acceleration of tensor renormalization with PyTorch using CUDA

We show that numerical computations based on tensor renormalization group (TRG) methods can be significantly accelerated with PyTorch on graphics processing units (GPUs) by leveraging NVIDIA's Compute Unified Device Architecture (CUDA). Here we find improvement in the runtime and its scaling with bond dimension for two-dimensional systems. Our results establish that the utilization of GPU resources is essential for future precision computations with TRG.

97 MATHEMATICS AND COMPUTING↗

DOE OSTI2024

Empowering Scientific Innovation Through An Integrated Research Infrastructure: The Role of the Advanced Computing Ecosystem

As the landscape of computational science evolves, the Department of Energy (DOE) is reimagining the roles of its large-scale computing facilities to meet emerging research challenges. The Integrated Research Infrastructure (IRI) program aims to transform how experiments are designed, conducted, and shared, with significant impacts on all stakeholders. In response, the Oak Ridge Leadership Computing Facility (OLCF) has established the Advanced Computing Ecosystem (ACE), a strategic framework to prepare its hardware, software, and experimental capabilities for the IRI era. ACE focuses on integrating novel compute environments, orchestrating advanced workflows, and developing foundational technologies, ensuring a seamless transition to IRI while accelerating scientific discovery. This paper outlines ACE's role in advancing OLCF's mission and its impact on the future of computational science.

Widener, Patrick↗

DOE OSTI2020

Holistic Measurement Driven Resilience: Combining Operational Fault and Failure Measurements and Fault Injection for Quantifying Fault Detection, Propagation and Impact. Final report

For HPC systems to date, application resilience to faults and failures has been accomplished by the brute- force method of checkpoint/restart, which allows an application to make forward progress in the face of system and application faults, errors, and failures independent of root cause or end result. It has remained the primary resilience mechanism because we lack a way to identify faults and anticipate consequences early enough to take meaningful mitigating action. However, checkpoint/restart implementations put a tremendous burden on system resources and on the applications themselves and is becoming less feasible at scale. Because we have not yet operated at scales at which checkpoint/restart fails to provide forward progress, despite increasing costs, vendors have had little motivation to provide the instrumentation necessary for early identification of faults and failures. However, as we move from petascale to exascale, component mean time to failure (MTTF) will render the existing techniques ineffectual and/or too expensive. Furthermore, fault recovery mechanisms such as failover and/or error correction introduce performance inconsistency. Instrumentation allowing early indication of problems and tools to enable use of such information by systems, operating systems, and applications offer an alternative, more scalable and less costly solution. In the HMDR project, we built on our experience and expertise developed and accumulated over years of research on design, monitoring, measurement, and assessment of resilient computing systems. Analysis of field data on the current and past generations of extreme-scale systems revealed several challenges that, if not addressed in increasingly larger and more complex systems, may hinder the effectiveness of future exascale computing systems. Specifically, i) file systems and interconnects in current-generation large-scale systems already operate at the margins of resiliency, including consistent performance, and may not scale to larger deployments; ii) automated, software-based failover mechanisms are frequently inadequate and can introduce wider failures, such that failures during recovery may lead to system/application failures, including system-wide outages; and iii) silent data corruption represents a critical fault mode and will require efficient detection mechanisms if next-generation applications are to take full advantage of exascale hardware. To address the above challenges, we assembled a team of world-renowned experts in resilient extreme- scale computing from the University of Illinois (Electrical and Computer Engineering, Computer Science, and NCSA), SNL, LANL, NERSC, and Cray. Our team includes representatives from centers that house many of the largest HPC resources in the world, both today and over the coming years. The team has a unique track record of research in i) system and application failure characterization based on the analysis of field data, ii) data-driven design of fault/error detection mechanisms, and iii) experimental characterization of system/application resiliency. The team includes system owners/operators who provide continuous data collection and access and ensure installation of appropriate analysis tools.

97 MATHEMATICS AND COMPUTING↗

NASA NTRS1986

Concurrent extensions to the FORTRAN language for parallel programming of computational fluid dynamics algorithms

Experiments were conducted at NASA Ames Research Center to define multi-tasking software requirements for multiple-instruction, multiple-data stream (MIMD) computer architectures. The focus was on specifying solutions for algorithms in the field of computational fluid dynamics (CFD). The program objectives were to allow researchers to produce usable parallel application software as soon as possible after acquiring MIMD computer equipment, to provide researchers with an easy-to-learn and easy-to-use parallel software language which could be implemented on several different MIMD machines, and to enable researchers to list preferred design specifications for future MIMD computer architectures. Analysis of CFD algorithms indicated that extensions of an existing programming language, adaptable to new computer architectures, provided the best solution to meeting program objectives. The CoFORTRAN Language was written in response to these objectives and to provide researchers a means to experiment with parallel software solutions to CFD algorithms on machines with parallel architectures.

Weeks, Cindy Lou↗

DOE OSTI2026

Ecosystems for Scientific Computing in the Age of AI

Scientific computing is at an inflection point. Artificial intelligence (AI) is reshaping how scientific software is developed, how teams collaborate, how projects are governed, and how the next generation is trained. Drawing on insights from a 2025 workshop report, this article argues that the future of discovery will depend on agile, robust ecosystems built through socio-technical co-design—the intentional integration of technical and human systems. This perspective is essential for ensuring that future scientific computing remains trustworthy, sustainable, and scalable. It combines advances in AI, high-performance computing, and software with new models for cross-disciplinary collaboration, education, and workforce development. Key recommendations include building modular, trustworthy AI-enabled software ecosystems; enabling teams to integrate AI into scientific workflows while preserving human creativity, integrity, and rigor; and developing adaptive training pathways that keep pace with rapid technological change. By sharing these perspectives, we hope to stimulate broader community dialogue and encourage coordinated action.

AI↗

DOE OSTI2026

Promise of Graph Sparsification and Decomposition for Noise Reduction in QAOA: Analysis for Trapped-Ion Compilations

We develop new approximate compilation schemes that significantly reduce the expense of compiling the Quantum Approximate Optimization Algorithm (QAOA) for solving the Max-Cut problem. Our main focus is on compilation with trapped-ion simulators using Pauli-X operations and all-to-all Ising Hamiltonian HIsing evolution generated by Molmer-Sorensen or optical dipole force interactions, though some of our results also apply to standard gate-based compilations. Our results are based on principles of graph sparsification and decomposition; the former reduces the number of edges in a graph while maintaining its cut structure, while the latter breaks a weighted graph into a small number of unweighted graphs. Though these techniques have been used as heuristics in various hybrid quantum algorithms, there have been no guarantees on their performance, to the best of our knowledge. This work provides the first provable guarantees using sparsification and decomposition to improve quantum noise resilience and reduce quantum circuit complexity. For quantum hardware that uses edge-by-edge QAOA compilations, sparsification leads to a direct reduction in circuit complexity. For trapped-ion quantum simulators implementing all-to-all HIsing pulses, we show that for a (1−ϵ) factor loss in the Max-Cut approximation (ϵ>0), our compilations improve the (worst-case) number of HIsing pulses from O(n2) to O(nlog(n/ϵ)) and the (worst-case) number of Pauli-X bit flips from O(n2) to O(nlog(n/ϵ)ϵ2) for n-node graphs. This is an asymptotic improvement for any constant ϵ>0. We demonstrate that significant improvements to the approximation ratio are obtained using decomposition in simulated trapped-ion experiments with dephasing noise. We further present a generic argument showing that sparsification results in an exponentially improved circuit fidelity lower bound in digital computing schemes based on one- and two-qubit gates, which are relevant to a wide variety of hardwares such as superconducting qubits and certain neutral atom or trapped ion setups, and more sophisticated noise models. We anticipate these approximate compilation techniques will be useful tools in a variety of future quantum computing experiments.

Moondra, Jai [Georgia Institute of Technology]↗

DOE OSTI2018

Spectroscopic and Computational Analysis of Chemical Pollutants Interactions on Steel - 18409

There is limited understanding of the scientific interaction of the chemical contaminants to DOE facility materials which can alter the stability of the materials, affecting the general safety. The resulting studies will have a direct impact towards developing an enhanced cost-effective decontamination method and understanding the negative effects caused by the chemical waste on the structural integrity of the solid surface in contact. First order kinematic models provide a better fit to the experimental data, implying that one layer of Hg adsorbs to the steel surface. Energy dispersive X-ray analysis confirmed that stainless steel samples are mainly composed of Fe, Ni, and Cr, and have a low carbon content. Objective: To determine the physiochemical interactions of Mercury (Hg) and Cesium (Cs) to steel and concrete using spectroscopic, adsorption and computational studies. To develop a multiscale simulation that shows the effects of adsorption and diffusion of alkali metals on the mechanical performance of steel alloys used in nuclear power plants. Approach: Molecular Dynamics (MD) simulations were used to compute the stress gradient generated in steel due to Hg adsorption. Finite element models were developed for simulating the effects of temperature and pressure in a diffusion analysis. Based on experimental data, one layer of Hg was used for the MD simulations. Material properties at the atomic level were determined from the MD simulations The stress gradient from the MD simulations is used as an input parameter in the FE simulation. Conclusions and Future Work: Computational methods such as MD and FE simulations were used to determine the effects of mercury adsorption in stainless steel samples. The adsorption process induces a stress gradient in the facility materials, which can affect the mechanical performance of facility materials under service. Tensile stresses help the diffusion process while compressive have the opposite effect. Temperature has a positive effect in the mass diffusion process. Future work will evaluate the effects of temperature on the material properties at the molecular level using both experimental and MD methods. Future work will evaluate the mechanical performance of facility materials at a wide range of environmental variables.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

DOE OSTI2023

Development of Multiresolution Capabilities for the Holistic Energy Resource Optimization Network (HERON) tool A progress update

INL researchers work on technoeconomic analyses for integrated energy systems (IES) using the Framework for Optimization of ResourCes and Economics (FORCE). Within FORCE, researchers use the Holistic Energy Resource Optimization Network (HERON) tool to conduct optimization of grid portfolios under uncertain market conditions. These optimizations determine optimal capacities for all IES components and strategies for resource dispatch which maximize some economic metric (e.g., net present value). Resource dispatch occurs on finer timescales (typically hours) and thus are asked to respond to a given time series (e.g. hourly load demand profiles for a grid, or pre-determined electricity prices). Volatile and complex bidding dynamics as well as poorly forecasted weather events within deregulated markets add uncertainty to the time series; FORCE can address this uncertainty by training a reduced order model on historical time series and generate unique synthetic time series which represent individual scenarios or realizations of the market. The IES configuration can be simulated under these different sampled realizations and a stochastic optimization is conducted which optimizes the expected value of the desired economic metric. The training of a synthetic time series generator is limited by the chosen time resolution; dynamics can occur on different time scales. Seasonal demand trends can dominate faster dynamical events (such as power outages from certain sectors or severe weather events) which might not get captured correctly by the trained model. In this report, we investigate different ways of addressing the training and generation of time series on multiple time scales using three main algorithms: wavelet decomposition, dynamic mode decomposition, and generative adversarial networks for time series. We demonstrate a time series analysis that yields information on not just the frequency space but also temporal space: where a fast Fourier transform can provide what frequencies dominate, the new algorithms can provide when the frequencies dominate as well. These analyses can help improve IES optimization by allowing researchers to couple simulations at different timescales when it is most needed - seasonal, day-ahead, and real time optimization - with greater computational efficiency. Future work will include implementation of a subset of the proposed algorithms into the FORCE toolset and application of these analyses into multiple timescale optimization.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

DOE OSTI2018

Simulated execution of hybrid quantum computing systems

We use modeling and simulation to study the behavior and performance of hybrid quantum computing systems. Our approach is based on a layered design with abstract machine models, which identify the key components and interfaces for quantum processing units, quantum programming models, and hybrid execution models. We use discrete-event simulating to track the dynamical state of hierarchical abstract machine models while executing test programs, and we collect statistics on time and energy consumption to forecast the resources required by quantum processors for future scientific computation.

Humble, Travis↗

DOE OSTI2025

Digital quantum simulation of cavity quantum electrodynamics: insights from superconducting and trapped ion quantum testbeds

We explore the potential for hybrid development of quantum hardware where currently available quantum computers simulate open cavity quantum electrodynamical (CQED) systems for applications in optical quantum communication, simulation and computing. Our simulations make use of a recent quantum algorithm that maps the dynamics of a singly excited open Tavis–Cummings model containing N atoms coupled to a lossy cavity. We report the results of executing this algorithm on two noisy intermediate-scale quantum computers: a superconducting processor and a trapped ion processor, to simulate the population dynamics of an open CQED system featuring N = 3 atoms. By applying technology-specific transpilation and error mitigation techniques, we minimize the impact of gate errors, noise, and decoherence in each hardware platform, obtaining results which agree closely with the exact solution of the system. These results can be used as a recipe for efficient and platform-specific quantum simulation of cavity–emitter systems on contemporary and future quantum computers.

cavity QED↗

DOE OSTI2018

An ATLAS distributed computing architecture for HL-LHC

The ATLAS collaboration started a process to understand the computing needs for the High Luminosity LHC era. Based on our best understanding of the computing model input parameters for the HL-LHC data taking conditions, results indicate the need for a larger amount of computational and storage resources with respect to the projection of constant yearly budget for computing in 2026. Filling the gap between the projection and the needs will be one of the challenges in preparation for HL-LHC. While the gains from improvements in offline software will play a crucial role in this process, a different model for data processing, management, access and bookkeeping should also be envisaged to optimise resource usage. In this contribution we will describe a straw man of this model, founded on basic principles such as single event level granularity for data processing and virtual data. We will explain how the current architecture will evolve adiabatically into the future distributed computing system, through the prototyping of building blocks that would be integrated in the production infrastructure as early as possible, so that specific use cases can be covered much earlier with respect to the HL-LHC time scale. We will also discuss how such system would adapt to and drive the evolution of the WLCG infrastructure in terms of facilities and services.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

DOE OSTI2021

Transfer Operator Framework for Earth System Predictability and Water Cycle Extremes

For chaotic dynamical systems, nonlinear instabilities lead to exponentially divergent trajectories in the evolution of system states. Unless a simulation is initialized with an infinite-precision snapshot of the state of the true system and all known physical effects that go into its evolution are directly computed, the future state predicted by the simulation will quickly diverge from that of the true system. Moreover, the Earth system is highly structured and contains localized coherent structures that are particularly important to predict. Predicting extreme events associated with coherent structures, like hurricanes and blocking events, is crucial for understanding the effects of global warming on the water cycle.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2021

Transfer Operator Framework for Earth System Predictability and Water Cycle Extremes

97 MATHEMATICS AND COMPUTING↗

DOE OSTI2023

Quantum algorithms for geologic fracture networks

Abstract Solving large systems of equations is a challenge for modeling natural phenomena, such as simulating subsurface flow. To avoid systems that are intractable on current computers, it is often necessary to neglect information at small scales, an approach known as coarse-graining. For many practical applications, such as flow in porous, homogenous materials, coarse-graining offers a sufficiently-accurate approximation of the solution. Unfortunately, fractured systems cannot be accurately coarse-grained, as critical network topology exists at the smallest scales, including topology that can push the network across a percolation threshold. Therefore, new techniques are necessary to accurately model important fracture systems. Quantum algorithms for solving linear systems offer a theoretically-exponential improvement over their classical counterparts, and in this work we introduce two quantum algorithms for fractured flow. The first algorithm, designed for future quantum computers which operate without error, has enormous potential, but we demonstrate that current hardware is too noisy for adequate performance. The second algorithm, designed to be noise resilient, already performs well for problems of small to medium size (order 10–1000 nodes), which we demonstrate experimentally and explain theoretically. We expect further improvements by leveraging quantum error mitigation and preconditioning.

58 GEOSCIENCES↗

DOE OSTI2024

Dynamic Cooling on Contemporary Quantum Computers

We study the problem of dynamic cooling whereby a target qubit is cooled at the expense of heating up N − 1 further identical qubits by means of a global unitary operation. A standard back-of-the-envelope high-temperature estimate establishes that the target qubit temperature can be dynamically cooled by at most a factor of 1 / N . Here we provide the exact expression for the minimum temperature to which the target qubit can be cooled and reveal that there is a crossover from the high initial temperature regime, where the scaling is 1 / N , to a low initial temperature regime, where a much faster scaling of 1 / N occurs. This slow, 1 / N scaling, which was relevant for early high-temperature NMR quantum computers, is the reason dynamic cooling was dismissed as ineffectual around 20 years ago; the fact that current low-temperature quantum computers fall in the fast, 1 / N scaling regime, reinstates the appeal of dynamic cooling today. We further show that the associated work cost of cooling is exponentially more advantageous in the low-temperature regime. We discuss the implementation of dynamic cooling in terms of quantum circuits and examine the effects of hardware noise. We successfully demonstrate dynamic cooling in a three-qubit system on a real quantum processor. Since the circuit size grows quickly with N , scaling dynamic cooling to larger systems on noisy devices poses a challenge. We therefore propose a suboptimal cooling algorithm, whereby relinquishing a small amount of cooling capability results in a drastically reduced circuit complexity, greatly facilitating the implementation of dynamic cooling on near-future quantum computers. Published by the American Physical Society2024

Physics↗