Search NASA⌕ Search

SEARCH · Search NASA

Results for “interactive model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15

Comparing some predictions between Davidson-like potentials and interacting boson model: X(5) behavior of even-even {sup 128-140}Nd isotopes

We denote that the level scheme of the transitional nuclei {sup 128-140}Nd also presents the characteristic X(5) pattern, not only in the ground-state band, but also in some low-lying bands. An adequate point of the model leading to the X(5) symmetry is therefore confirmed. We also carry out calculations of positive-parity states of even-mass Nd nuclei within the framework of the interacting-boson model, and then the calculated energy values are compared with the experimental data along with the Davidson potential predictions. By comparing transitional behavior in the Nd nuclei with the predictions of an X(5) critical symmetry, we investigate an achievable degree of agreement between the predictions of the model leading to this symmetry and the interacting-boson model (IBM-1 and IBM-2). They agree well with the predictions of the experimental data.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Chern-Simon potential in models of interaction of electromagnetic field with thin films

The proposed by Symanzik approach for the modeling of interaction of a macroscopic material body with quantum fields is considered. Its application in quantum electrodynamics enables one to establish the most general form of the action functional describing the interaction of 2-dimensional material surface with photon field. The models making it possible to calculate for thin films from non-ideal conducting material the Casimir energy, Casimir-Polder potential, characteristics of scattering processes and investigation of magneto- and electrostatic phenomena are presented. The specific of regularization and renormalization procedures used by calculations and the physical meaning of obtained results are discussed.

36 MATERIALS SCIENCE↗

Application of Information Technologies at the Final Stage of the Lifecycle of Reactor Facilities

The information technologies used at the final lifecycle stage of reactor facilities are reviewed for the purpose of increasing the safety and efficiency of their decommissioning. Databases on decommissioning and radwaste management, computer-aided design systems, multidimensional models, interactive simulation models, knowledge control systems, and communication systems are examined.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Small-angle fragmentation of carbon ions at 0.6 GeV/n: A comparison with models of ion-ion interactions

Momentum distributions of hydrogen and helium isotopes from ¹²C fragmentation at 3.5° were measured at 0.6 GeV/nucleon in the FRAGM experiment at ITEP TWA heavy ion accelerator. The fragments were selected by correlated time of flight and dE/dx measurements with a magnetic spectrometer with scintillation counters. The main attention was drawn to the high momentum region where the fragment velocity exceeds the velocity of the projectile nucleus. The momentum spectra of fragments span the region of the fragmentation peak as well as the cumulative region. The differential cross sections cover six orders of magnitude. The distributions measured are compared to the predictions of three ion-ion interaction models: BC, QMD and LAQGSM03.03. The kinetic energy spectra of fragments in the projectile rest frame have an exponential shape with two temperatures, being defined by their slope parameters.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Small-angle fragmentation of carbon ions at 0.6 GeV/n. A comparison with models of ion-ion interactions

The momentum distributions of hydrogen and helium isotopes from 12 C fragmentation at 3.5° were measured at 0.6 GeV/nucleon in the FRAGM experiment at ITEP TWA heavy ion accelerator. The fragments were selected by correlated time of flight and dE/dx measurements with a magnetic spectrometer with scintillation counters. The main attention was drawn to the high momentum region where the fragment velocity exceeds the velocity of the projectile nucleus. The momentum spectra of fragments span the region of the fragmentation peak as well as the cumulative region. Moreover, the differential cross sections cover six orders of magnitude. The distributions measured are compared to the predictions of three ion-ion interaction models: BC, QMD and LAQGSM03.03. The kinetic energy spectra of fragments in the projectile rest frame have an exponential shape with two temperatures, being defined by their slope parameters.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Electron correlations and two-photon states in polycyclic aromatic hydrocarbon molecules: A peculiar role of geometry

We present numerical studies of one- and two-photon excited states ordering in a number of polycyclic aromatic hydrocarbon molecules: coronene, hexa-peri-hexabenzocoronene, and circumcoronene, all possessing D{sub 6h} point group symmetry versus ovalene with D{sub 2h} symmetry, within the Pariser-Parr-Pople model of interacting π-electrons. The calculated energies of the two-photon states as well as their relative two-photon absorption cross-sections within the interacting model are qualitatively different from single-particle descriptions. More remarkably, a peculiar role of molecular geometry is found. The consequence of electron correlations is far stronger for ovalene, where the lowest spin-singlet two-photon state is a quantum superposition of pairs of lowest spin triplet states, as in the linear polyenes. The same is not true for D{sub 6h} group hydrocarbons. Our work indicates significant covalent character, in valence bond language, of the ground state, the lowest spin triplet state and a few of the lowest two-photon states in D{sub 2h} ovalene but not in those with D{sub 6h} symmetry.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Temperature-dependent 780-nm laser absorption by engineering grade aluminum, titanium, and steel alloy surfaces

When modeling laser interaction with metals for various applications it requires a knowledge of absorption coefficients for real, commercially available materials with engineering grade (unpolished, oxidized) surfaces. But, most currently available absorptivity data pertain to pure metals with polished surfaces or vacuum-deposited thin films in controlled atmospheres. A simple laboratory setup is developed for the direct calorimetric absorptivity measurements using a diode-array laser emitting at 780 nm. A scheme eliminating the effect of convective and radiative losses is implemented. Futhermore, the obtained absorptivity results differ considerably from existing data for polished pure metals and are essential for the development of predictive laser-material interaction models.

36 MATERIALS SCIENCE↗

New Microscopic foundation of Interacting Boson Model and collectivities in exotic nuclei

We propose a novel way of determining the Hamiltonian of the Interacting Boson Model (IBM), based on the Mean-field theory. The quadrupole deformations in a fermion system, indicated by a Potential Energy Surface (PES) obtained by the constrained Skyrme Hartree-Fock calculations, are mapped, to a good approximation, onto the appropriate boson system. A merit is that levels and wave functions of excited states are calculated with the exact treatments of angular momentum and particle number. The validity of the process is examined for Sm and Ba isotopes, and predictions are made for unexplored territories on the nuclear chart, namely the right-lower corner of {sup 208}Pb.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Non-filamentated ultra-intense and ultra-short pulse fronts in three-dimensional Raman seed amplification

Ultra-intense and ultra-short laser pulses may be generated up to the exawatt-zetawatt regime due to parametric processes in plasmas. The minimization of unwanted plasma processes leads to operational limits which are discussed here with respect to filamentation. Transverse filamentation, which originally was derived for plane waves, is being investigated for seed pulse propagation in the so called π-pulse limit. A three-dimensional (3D) three-wave-interaction model is the basis of the present investigation. To demonstrate the applicability of the three-wave-interaction model, the 1D pulse forms are compared with those obtained from 1D particle in cell and Vlasov simulations. Although wave-breaking may occur, the kinetic simulations show that the leading pumped pulse develops a form similar to that obtained from the three-wave-interaction model. In the main part, 2D and 3D filamentation processes of (localized) pulses are investigated with the three-wave-interaction model. It is shown that the leading pulse front can stay filamentation-free, whereas the rear parts show transverse modulations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Modeling laser interactions with aluminum and tantalum targets using a hybrid atomistic-continuum model

A hybrid atomistic-continuum method can model the microstructure evolution of metals subjected to laser irradiation. This method combines classical molecular dynamics (MD) simulations with the two-temperature model (TTM) to account for the laser energy absorption and heat diffusion behavior. Accurate prediction of the temperature evolution in the combined MD-TTM method requires reliable accuracy in electron heat capacity, electron thermal conductivity, and electron–phonon coupling factor across the temperatures generated. This study uses the electronic density of states (DOS) obtained from first-principle calculations. The calculated electron temperature-dependent parameters are used in MD-TTM simulations to study the laser metal interactions in FCC and BCC metals and the phenomenon of laser shock loading and melting. This study uses FCC Al and BCC Ta as model systems to demonstrate this capability. When subjected to short pulsed laser shocks, the dynamic failure behavior predicted using temperature-dependent parameters is compared with the experimentally reported single-crystal and nanocrystalline Al and Ta systems. The MD-TTM simulations also investigate laser ablation and melting behavior of Ta to compare with the ablation threshold reported experimentally. In conclusion, this manuscript demonstrates that integrating the temperature-dependent parameters into MD-TTM simulations leads to the accurate modeling of the laser–metal interaction and allows the prediction of the kinetics of the solid–liquid interface.

36 MATERIALS SCIENCE↗

Reference interaction site model with hydrophobicity induced density inhomogeneity: An analytical theory to compute solvation properties of large hydrophobic solutes in the mixture of polyatomic solvent molecules

Reference interaction site model (RISM) has recently become a popular approach in the study of thermodynamical and structural properties of the solvent around macromolecules. On the other hand, it was widely suggested that there exists water density depletion around large hydrophobic solutes (>1 nm), and this may pose a great challenge to the RISM theory. In this paper, we develop a new analytical theory, the Reference Interaction Site Model with Hydrophobicity induced density Inhomogeneity (RISM-HI), to compute solvent radial distribution function (RDF) around large hydrophobic solute in water as well as its mixture with other polyatomic organic solvents. To achieve this, we have explicitly considered the density inhomogeneity at the solute-solvent interface using the framework of the Yvon-Born-Green hierarchy, and the RISM theory is used to obtain the solute-solvent pair correlation. In order to efficiently solve the relevant equations while maintaining reasonable accuracy, we have also developed a new closure called the D2 closure. With this new theory, the solvent RDFs around a large hydrophobic particle in water and different water-acetonitrile mixtures could be computed, which agree well with the results of the molecular dynamics simulations. Furthermore, we show that our RISM-HI theory can also efficiently compute the solvation free energy of solute with a wide range of hydrophobicity in various water-acetonitrile solvent mixtures with a reasonable accuracy. We anticipate that our theory could be widely applied to compute the thermodynamic and structural properties for the solvation of hydrophobic solute.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Investigation of Aapprox100 mass region up to exotic with interacting boson model

Even-even nuclei in the Aapprox100 mass region are investigated within the framework of the interacting boson model-1 (IBM-1). The parametrization established on the basis of known elements is then used to predict properties of the unknown. This paper includes the predicted energy spectra and the potential energy surface obtained from the IBM-1 hamiltonian in the classical limit.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Extended Interacting Boson Model with Configuration Mixing Description For 98 Mo

An extended version of the interacting boson model (IBM), encompassing two-particle–two-hole (2p-2h) excitations originating from below a valence shell and one-particle–one-hole (1p-1h) excitations extending to the upper next-nearest major shell, is developed to investigate cross-shell excitation effects in the transitional nucleus 98 Mo. This extended IBM framework is utilized to reproduce experimentally observed properties such as low-lying positive-parity level energies, 𝐵⁡(𝐸⁢2) values, and the electric quadrupole moment of the 2$^{+}_{1}$ state, 𝜌 2 ⁡(𝐸⁢0, 0$^{+}_{2}$ → 0$^{+}_{g}$), as well as the strength functions of the isoscalar giant monopole resonance (ISGMR) and the isoscalar giant quadrupole resonance (ISGQR) in 98 Mo. It is shown that the extended consistent-𝑄 IBM, incorporating configuration mixing of both 2p-2h excitations from below the valence shell and 1p-1h excitations to the upper next-nearest major shell, describes the low-lying structural properties and the ISGMR and ISGQR strength distributions of 98 Mo quite well, with the ISGMR and the ISGQR strength distributions comparable to the results of the self-consistent quasiparticle random-phase approximation with Skyrme interactions.

90 ≤ A ≤ 149↗

Efficient implementation of the three-dimensional reference interaction site model method in the fragment molecular orbital method

The three-dimensional reference interaction site model (3D-RISM) method was efficiently implemented in the fragment molecular orbital (FMO) method. The method is referred to as the FMO/3D-RISM method, and allows us to treat electronic structure of the whole of a macromolecule, such as a protein, as well as the solvent distribution around a solute macromolecule. The formalism of the FMO/3D-RISM method, for the computationally available form and variational expressions, are proposed in detail. A major concern leading to the implementation of the method was decreasing the computational costs involved in calculating the electrostatic potential, because the electrostatic potential is calculated on numerous grid points in three-dimensional real space in the 3D-RISM method. In this article, we propose a procedure for decreasing the computational costs involved in calculating the electrostatic potential in the FMO method framework. The strategy involved in this procedure is to evaluate the electrostatic potential and the solvated Fock matrix in different manners, depending on the distance between the solute and the solvent. The electrostatic potential is evaluated directly in the vicinity of the solute molecule by integrating the molecular orbitals of monomer fragments of the solute molecule, whereas the electrostatic potential is described as the sum of multipole interactions when an analog of the fast multipole method is used. The efficiency of our method was demonstrated by applying it to a water trimer system and three biomolecular systems. The FMO/3D-RISM calculation can be performed within a reasonable computational time, retaining the accuracy of some physical properties.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

An improved lattice Boltzmann scheme for multiphase fluid with multi-range interactions

Modeling of fluids with liquid to gas phase transition has become important for understanding many environmental or industrial processes. Such simulations need new techniques, because traditional solvers are often limited. The Lattice Boltzmann Model (LBM) allows simulate complex fluids, because its mesoscopic nature gives possibility to incorporate additional physics in comparison to usual methods. In this work, an improved lattice Boltzmann model for phase transition flow will be introduced. First, the state of art for Shan and Chen (SC) type of LBM will be reminded. Then, link to real thermodynamics will be established with Maxwell equal areas construction. Convergence to isothermal liquid vapor equilibrium will be shown and discussed. Inclusion of an equation of state for real fluid and better incorporation of force term is presented. Multi-range interactions have been used for SC model, but it hasn't been yet applied to real fluid with non-ideal equation of state. In this work, we evaluate this model when it is applied to real liquid-vapor equilibrium. We show that important differences are found for evaluation of gas density. In order to recover thermodynamic consistency, we use a new scheme for calculation of force term, which is a combination of multi range model and numerical weighting used by Gong and Cheng. We show the superiority of our new model by studying convergence to equilibrium values over a large temperature range. We prove that spurious velocities remaining at equilibrium are decreased.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Description of Exotic Nuclei with the Interacting Boson Model

Even--even nuclei in the A{approx}100 mass region are investigated within the framework of the interacting boson model-1 (IBM-1). The study includes energy spectra and electric quadrupole transition properties of zirconium, molybdenum, ruthenium and palladium isotopes with neutron number N{>=}54. A global parametrization of the IBM-1 hamiltonian is found leading to a description of 301 collective levels in 30 nuclei with a root-mean-square deviation from the observed level energies of 119 keV. The geometric character of the nuclei can be visualized by plotting the potential energy surface V({beta},{gamma}) obtained from the IBM-1 hamiltonian in the classical limit. The parametrization established on the basis of known elements is then used to predict properties of the unknown, neutron-rich isotopes {sup 106}Zr, {sup 112}Mo, {sup 116}Ru and {sup 120}Pd.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Occurrence of high-lying rotational bands in the interacting boson model

We observe an adiabatic separation of collective rotations built upon a subset of intrinsic vibrational states within the interacting boson model (IBM) in the parameter domains corresponding to axially deformed ground state. The effect is not limited only to the low-lying states and closely follows the variation of quantum and classical measures of regularity. It leads to the existence of rotational bands even close to the highest accessible energies in specific regions within the IBM symmetry triangle. We propose a more general effect of regular intrinsic dynamics on the adiabatic separation of intrinsic and collective motion.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Jet-Surface Interaction Noise Models Comparison to TMP17 and Next Steps

A set of empirical jet-surface interaction noise models, developed for single-stream round nozzles exhausting over a simple surface in a static ambient, are evaluated for use in more realistic applications that include multi-stream nozzle systems with chevrons and dihedral surface geometries. The simple-single-stream models have several advantages when used in system-level noise studies: they are robust, they are quickly computed, and they are generally applicable to a wide range of configurations. However, these models rely on a fixed noise source distribution that does not account for the presence of chevrons at the nozzle exit. The effect of this omission on the prediction accuracy is shown by this comparison to experimental data. This motivates discussion of future work to develop a more robust modeling framework that can account for generalized source distributions and more complex airframe geometries. Re: Top-Mounted Propulsion (TMP17) Test Plans.

Propulsion Noise↗