Search NASA⌕ Search

SEARCH · Search NASA

Results for “pH optimization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Electrochemical Corrosion of SIMFUEL: Effects of dissolved H2 and noble metal particles

This report describes the results from electrochemical corrosion tests that were conducted using simulated spent fuel (SIMFUEL) materials comprised of UO2 and surrogate fission products. Two SIMFUEL compositions were tested to quantify the effect of noble metal inclusions and dissolved H2 on the UO2 dissolution rate. One material consisted of UO2 with added lanthanide oxides (UO2 N) and the other consisted of UO2 with added lanthanide oxides and noble metals (UO2-H) at concentrations to simulate high burnup fuel. The electrochemical corrosion tests on the SIMFUEL materials were conducted in aqueous electrolyte solutions (pH 10) that were either saturated with air or purged with a H2/Ar gas mixture to maintain a constant dissolved H2 concentration. The results from electrochemical corrosion tests on SIMFUEL can be applied to qualitatively understand and also quantify the separate effects of water chemistry and fuel composition on the degradation behavior of the UO2 matrix. Open circuit potential (OCP) measurements on a SIMFUEL material of known composition (i.e., known fraction of NMPs at the fuel surface) immersed in a known solution chemistry (i.e., pH, Eh, [O2], [H2]) at known temperature provide qualitative insight into the degradation behavior of the UO2 matrix. If the OCP is above the threshold potential at which the oxidative dissolution of U(IV) to U(VI) occurs, the SNF is expected to degrade by oxidative processes under the experimental conditions. The net currents that are measured during potentiostatic tests, during which the surface potential of the SIMFUEL material is fixed by a potentiostat, can be used to quantify the UO2 degradation rate and optimize the rate constant values used in the Fuel Matrix Degradation Model (FMDM) for half reactions that occur on the SNF surface. Specifically, electrochemical measurements enable the estimation of the total anodic current at ECORR–which is the surface potential at which the total anodic and total cathodic currents are equal–so that the rate constant values for key reactions can be calculated. The open circuit potential measurements, potentiostatic tests, surface property measurements (scanning electron microscopy images and electrochemical impedence spectroscopy plots), and solution elemental composition analyses are being performed to update and optimize the FMDM. A case study is presented herein to show how electrochemical corrosion test results and accompanying characterization results for the UO2 N material in air-saturated solution can be used to validate the SNF surface reaction module of the FMDM. Future electrochemical tests will be conducted to provide quantitative information on the effects of NM content (burnup), H2 concentration, water chemistry, temperature, and galvanic couples with cladding and EBS alloys on UO2 degradation that can be used to improve the accuracy and functionality of the FMDM.

Thomas, Sara↗
NASA NTRS2011

Analysis of Mars Analogue Soil Samples Using Solid-Phase Microextraction, Organic Solvent Extraction and Gas Chromatography/Mass Spectrometry

Polycyclic aromatic hydrocarbons (PAHs) are robust and abundant molecules in extraterrestrial environments. They are found ubiquitously in the interstellar medium and have been identified in extracts of meteorites collected on Earth. PAHs are important target molecules for planetary exploration missions that investigate the organic inventory of planets, moons and small bodies. This study is part of an interdisciplinary preparation phase to search for organic molecules and life on Mars. We have investigated PAH compounds in desert soils to determine their composition, distribution and stability. Soil samples (Mars analogue soils) were collected at desert areas of Utah in the vicinity of the Mars Desert Research Station (MDRS), in the Arequipa region in Peru and from the Jutland region of Denmark. The aim of this study was to optimize the solid-phase microextraction (SPME) method for fast screening and determination of PAHs in soil samples. This method minimizes sample handling and preserves the chemical integrity of the sample. Complementary liquid extraction was used to obtain information on five- and six-ring PAH compounds. The measured concentrations of PAHs are, in general, very low, ranging from 1 to 60 ng g(sup -1). The texture of soils is mostly sandy loam with few samples being 100% silt. Collected soils are moderately basic with pH values of 8-9 except for the Salten Skov soil, which is slightly acidic. Although the diverse and variable microbial populations of the samples at the sample sites might have affected the levels and variety of PAHs detected, SPME appears to be a rapid, viable field sampling technique with implications for use on planetary missions.

Orzechowska, G. E.↗
NASA NTRS2015

Recent Developments on Autonomous Corrosion Protection Through Encapsulation

This paper concerns recent progress in the development of a multifunctional smart coating, based on microencapsulation, for the autonomous detection and control of corrosion. Microencapsulation has been validated and optimized to incorporate desired corrosion control functionalities, such as early corrosion detection and inhibition, through corrosion-initiated release of corrosion indicators and inhibitors, as well as self-healing agent release triggered by mechanical damage. While proof-of-concept results have been previously reported, more recent research and development efforts have concentrated on improving coating compatibility and synthesis procedure scalability, with a targeted goal of obtaining easily dispersible pigment-grade type microencapsulated materials. The recent progress has resulted in the development of pH-sensitive microparticles as a corrosion-triggered delivery system for corrosion indicators and inhibitors. The synthesis and early corrosion indication results obtained with coating formulations that incorporate these microparticles are reported. The early corrosion indicating results were obtained with color changing and with fluorescent indicators.

Autonomous↗
DOE OSTI2020

(Invited) Modeling Electrolyzers: Exploring the Applied Voltage Breakdown

To commercialize successfully polymer-electrolyte electrolyzers and optimize their performance, one requires a detailed understanding of the underlying physics and phenomena. Mathematical modeling is ideally suited to explore such intricacies. In this Tutorial, the modeling equations and approaches towards both proton- and hydroxide-conducting polymer electrolyzers will be detailed. This includes the introduction of the applied voltage breakdown that separates the overall polarization curve into its constitutive parts such that the limiting mechanisms can be ascertained. Throughout, different case studies will be explored including impacts of bubble generation, liquid versus vapor feed, and pH changes due to carbonate and hydroxide solution feeds. A key focus of the Tutorial will be in exploring and describing the various transport and competing phenomena within the electrolyzer cell.

42 ENGINEERING↗
DOE OSTI2021

Heterogeneous photo-Fenton-like degradation of emerging pharmaceutical contaminants in wastewater using Cu-doped MgO nanoparticles

In this study, a facile thermal decomposition method was utilized to synthesize Cu-doped MgO nanoparticles possessing mesoporosity. These mesoporous Cu doped MgO nanoparticles were shown to be efficient photo-Fenton-like catalysts for the degradation of emerging pharmaceutical contaminants in wastewater and were able to completely oxidize salicylic acid within 1 hour under optimized conditions. Tetracycline was shown to be converted to other intermediates with a large portion of it undergoing full mineralization. Batch experiments were conducted to demonstrate the effects of Cu loading on MgO, overall catalyst loading, and H 2 O 2 concentration on the salicylic acid and tetracycline conversion and rate constants. Quenching experiments revealed that both •OH radicals or HO 2 •/•O 2 - radicals were involved in the reaction, with the latter showing a higher contribution. The surface dissolution of MgO was shown to facilitate a high pH environment which completely prevented Cu from leaching out of the catalyst while retaining high activity. The catalyst reusability was shown to be satisfactory with high activity and conversion being preserved over five cycles.

04 OIL SHALES AND TAR SANDS↗
DOE OSTI2024

Pilot microbial electrolysis cell closes the hydrogen loop for hydrothermal wet waste conversion to jet fuel

The global shift toward net-zero emissions necessitates resource recovery from wet waste. In this study, we demonstrate the first feasibility of combining pilot-scale microbial electrolytic cells (MECs) with hydrothermal liquefaction (HTL) for simultaneous post-hydrothermal liquefaction wastewater (PHW) treatment and efficient hydrogen (H₂) production to meet biocrude upgrading requirements. Long-term single reactor operation revealed that fixed anode potential enabled rapid startup, and low catholyte pH and high salinity were effective in suppression of cathodic methanogenesis and acetogenesis – resulting in high current density of 16.6 A m –2 and 9.3 A m –2 when feeding synthetic wastewater and PHW respectively. Additionally, the anode biofilm exhibited spatial variations in response to local environmental conditions. In conclusion, onsite parallel or serial operations of multiple MECs showed good performance using actual PHW with a record-high H 2 production rate of 0.5 L L R day –1 for MEC over 10 liters scale, and the optimal chemical oxygen demand (COD)-to-H 2 yield reached 0.127 kg-H 2 per kg-COD, supporting a self-sufficient, closed-loop upgrade to jet fuel.

08 HYDROGEN↗
DOE OSTI2024

Dual Enhancement of Thermostability and Activity of Xylanase through Computer-Aided Rational Design

In the realm of enzyme engineering, the dual enhancement of thermostability and activity remains a challenge. Herein, we employed a computer-aided approach integrating folding free energy calculations and evolutionary analysis to engineer Paecilomyces thermophila xylanase into a hyperthermophilic enzyme for application in the paper and pulp industry. Through the computational rational design, XynM9 with superior thermostability and enhanced activity was designed. Its optimal reaction temperature increases by 10 °C to 85 °C, its T m increases by 10 °C to 93 °C, and its half-life increases 11-fold to 5.8 h. Additionally, its catalytic efficiency improves by 57% to 3926 s –1 mM –1 . Molecular dynamics simulations revealed that XynM9 is stabilized by more hydrogen bonds and salt bridges than wild-type xylanase. The mutant’s narrower catalytic cleft enhances the substrate-binding affinity, thus improving the catalytic efficiency. In harsh conditions at 80 °C and pH 10, using XynM9 significantly reduced both hemicellulose and lignin, which makes it a good candidate for use in the paper and pulp process. Finally, our study presents an accurate and efficient strategy for the dual enhancement of enzyme properties, guiding further improvement of computational tools for protein stabilization.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Effect of grafting density on the two-dimensional assembly of nanoparticles

Employing grazing-incidence small-angle X-ray scattering (GISAXS) and X-ray reflectivity (XRR), we demonstrate that films composed of polyethylene glycol (PEG)-grafted silver nanoparticles (AgNPs) and gold nanoparticles (AuNPs), as well as their binary mixtures, form highly stable hexagonal structures at the vapor–liquid interface. These nanoparticles exhibit remarkable stability under varying environmental conditions, including changes in pH, mixing concentration, and PEG chain length. Short-chain PEG grafting produces dense, well-ordered films, while longer chains produce more complex, less dense quasi-bilayer structures. AuNPs exhibit higher grafting densities than AgNPs, leading to more ordered in-plane arrangements. In binary mixtures, AuNPs dominate the population at the surface, while AgNPs integrate into the system, expanding the lattice without forming a distinct binary superstructure. In conclusion, these results offer valuable insights into the structural behavior of PEG-grafted nanoparticles and provide a foundation for optimizing binary nanoparticle assemblies for advanced nanotechnology applications.

36 MATERIALS SCIENCE↗
DOE OSTI2023

UniKP: a unified framework for the prediction of enzyme kinetic parameters

Prediction of enzyme kinetic parameters is essential for designing and optimizing enzymes for various biotechnological and industrial applications, but the limited performance of current prediction tools on diverse tasks hinders their practical applications. Here, we introduce UniKP, a unified framework based on pretrained language models for the prediction of enzyme kinetic parameters, including enzyme turnover number (k cat ), Michaelis constant (K m ), and catalytic efficiency (k cat / K m ), from protein sequences and substrate structures. A two-layer framework derived from UniKP (EF-UniKP) has also been proposed to allow robust k cat prediction in considering environmental factors, including pH and temperature. In addition, four representative re-weighting methods are systematically explored to successfully reduce the prediction error in high-value prediction tasks. We have demonstrated the application of UniKP and EF-UniKP in several enzyme discovery and directed evolution tasks, leading to the identification of new enzymes and enzyme mutants with higher activity. UniKP is a valuable tool for deciphering the mechanisms of enzyme kinetics and enables novel insights into enzyme engineering and their industrial applications.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2022

U(VI) binding onto electrospun polymers functionalized with phosphonate surfactants

We previously observed that phosphonate functionalized electrospun nanofibers can uptake U(VI), making them promising materials for sensing and water treatment applications. Here, we investigate the optimal fabrication of these materials and their mechanism of U(VI) binding under the influence of environmentally relevant ions (e.g., Ca 2+ and CO 3 2- ). We found that U(VI) uptake was greatest on polyacrylonitrile (PAN) functionalized with longer-chain phosphonate surfactants (e.g., hexa- and octadecyl phosphonate; HDPA and ODPA, respectively), which were better retained in the nanofiber after surface segregation. Subsequent uptake experiments to better understand specific solid-liquid interfacial interactions were carried out using 5 mg of HDPA-functionalized PAN mats with 10 μM U at pH 6.8 in four systems with different combinations of solutions containing 5 mM calcium (Ca 2+ ) and 5 mM bicarbonate (HCO 3 -). U uptake was similar in control solutions containing no Ca 2+ and HCO 3 - (resulting in 19 ± 3% U uptake), and in those containing only 5 mM Ca2+ (resulting in 20 ± 3% U uptake). A decrease in U uptake (10 ± 4% U uptake) was observed in experiments with HCO 3 -, indicating that UO 2 -CO 3 complexes may increase uranium solubility. Results from shell-by-shell EXAFS fitting, aqueous extractions, and surface-enhanced Raman scattering (SERS) indicate that U is bound to phosphonate as a monodentate inner sphere surface complex to one of the hydroxyls in the phosphonate functional groups. New knowledge derived from this study on material fabrication and solid-liquid interfacial interactions will help to advance technologies for use in the in-situ detection and treatment of U in water.

42 ENGINEERING↗
DOE OSTI2025

Quarterly Soil Core and Root Analyses from the Missouri Ozarks AmeriFlux (MOFLUX) Site, Ashland, Missouri, 2017-2023

This dataset contains quarterly soil core measurements from the Missouri Ozarks AmeriFlux (MOFLUX) site located at the University of Missouri’s Thomas H. Baskett Wildlife Research and Education Area near Ashland, Missouri. These data will be used to parameterize an ensemble of MOFLUX-optimized soil carbon-nitrogen models, used to simulate carbon (C) and nitrogen (N) cycling responses to future hydroclimatic scenarios and the trajectory of soil C stocks with concomitant forest decline. Beginning in 2017, eight soil cores were collected approximately quarterly near plot 1 of the southeast transect, near the automated soil respiration flux chambers, from 0–15 cm depth. Data are currently available through 2023 (2017-06-14 to 2023-11-13); additional observations will be appended to this dataset as they become available. Cores were analyzed for gravimetric moisture content, pH, total carbon and nitrogen, texture, microbial biomass carbon and nitrogen, and extractable dissolved organic carbon and nitrogen. This dataset contains one data file in comma separate (*.csv) format. Additional metadata are provided: one data dictionary and a file-level metadata file in comma separate (*.csv) format and a user guide in PDF (*.pdf) format.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Quantification of the Impact of Acidified Brine on Fracture-Matrix Transport in a Naturally Fractured Shale Using in Situ Imaging and Modeling

Understanding flow, transport, chemical reactions, and hydromechanical processes in fractured geologic materials is key for optimizing a range of subsurface processes including carbon dioxide and hydrogen storage, unconventional energy resource extraction, and geothermal energy recovery. Flow and transport processes in naturally fractured shale rocks have been challenging to characterize due to experimental complexity and the multiscale nature of quantifying continuum scale descriptions of mass exchange between micrometer-scale fractures and nanometer-scale pores. In this study, we use positron emission tomography (PET) to image the transport of a conservative tracer in a naturally fractured Wolfcamp shale core before and after the core was exposed to low pH brine conditions. Image-based experimental observations are interpreted by fitting an analytical transport model to fracture-containing voxels in the core. Results of this analysis indicate subtle increases in matrix diffusivity and a slightly more uniform fracture velocity distribution following exposure to low pH conditions. These observations are compared with a multicomponent one-dimensional reactive transport model that indicates the capacity for a 10% increase in porosity at the fracture-matrix interface as a result of the low pH brine exposure. This porosity change is the result of the dissolution of carbonate minerals in the shale matrix to low pH conditions. Further, this image-based workflow represents a new approach for quantifying spatially resolved fracture-matrix transport processes and provides a foundation for future work to better understand the role of coupled transport, reaction, and mechanical processes in naturally fractured rocks.

58 GEOSCIENCES↗
DOE OSTI2021

Distinct Mechanisms and Hydricities of Cp*Ir-Based CO 2 Hydrogenation Catalysts in Basic Water

Transition metal-catalyzed reversible hydrogenation of CO 2 to formate in aqueous solutions under ambient conditions is an attractive environmentally friendly strategy for the storage and transportation of H 2 in a liquid chemical form. Here, mechanistic details for the CO 2 hydrogenation by a series of pentamethylcyclopentadienyl iridium(III) (Cp*Ir) complexes with picolinamidate ligands are investigated through density functional theory and kinetic isotope effects (KIEs) calculations. Additionally, adopting a speciation approach at a pH of 8.2, CO 2 hydrogenation mechanisms of 37 distinct protonation states and conformers of Cp*Ir type complexes are investigated. This imposes a challenging test for the computational modeling in terms of providing a consistent correlation with experimental kinetics and KIE studies of multiple catalysts instead of a single complex. Overall, H 2 heterolysis to generate an iridium hydride intermediate was demonstrated to be the rate determining step, which proceeds via distinct pathways depending on the stereoelectronic properties of the ligand. A peculiar iridium dihydride route was also uncovered, which could be optimized to accelerate the H 2 heterolysis. We have further computed the thermodynamic and kinetic hydricities of 74 complexes with [Cp*Ir(L)(H)] q ( q = -1, 0, 1 depending on the ligand charge by deprotonation or protonation events) general formula. Hydricity values do not show any noticeable correlation with the thermodynamics (Δ G ) of [Cp*Ir(L)(HCO 2 – )] formation but exhibit linear correlation with the kinetics (Δ G ‡ ) of electrophilic CO 2 attack to iridium hydride species, especially when the charges and local structural effects of the metal hydrides are considered. Insights gained in this study on (i) the factors determining the preferred pathway for the rate-limiting H 2 heterolysis step, (ii) the correlation between thermodynamic hydricity and the kinetics of CO 2 insertion to iridium hydride species, and (iii) mechanistic analysis via combination of free energy profiles and KIE studies for a series of iridium catalysts will provide guidelines for the design of next-generation catalysts for the reversible H 2 storage through CO 2 utilization.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS2011

Microencapsulation of Corrosion Indicators for Smart Coatings

A multifunctional smart coating for the autonomous detection, indication, and control of corrosion is been developed based on microencapsulation technology. This paper summarizes the development, optimization, and testing of microcapsules specifically designed for early detection and indication of corrosion when incorporated into a smart coating. Results from experiments designed to test the ability of the microcapsules to detect and indicate corrosion, when blended into several paint systems, show that these experimental coatings generate a color change, indicative of spot specific corrosion events, that can be observed with the naked eye within hours rather than the hundreds of hours or months typical of the standard accelerated corrosion test protocols.. Key words: smart coating, corrosion detection, microencapsulation, microcapsule, pH-sensitive microcapsule, corrosion indicator, corrosion sensing paint

Li, Wenyan↗
DOE OSTI2024

Pulse Electrodeposition for Carbonate-Rich Deposits from Seawater

Seawater electrodeposition is gaining renewed interest in the context of sustainable development, both to build climate-resilient coastal infrastructure and for ocean-based decarbonization applications. Most of the applications benefit from CaCO 3 -rich deposits, but constant-voltage electrodeposition results in a mixture of CaCO 3 and Mg(OH) 2 , especially at higher voltages where precipitation rates are more desirable. The use of pulse voltages can help control interfacial pH that dictates the precipitation reactions. Here, we explore the use of pulse electrodeposition as a function of pulse frequency and duty cycle to control deposit composition. The most CaCO 3 -rich deposits were obtained under 10 Hz frequency and 10% duty cycle conditions for the voltage window investigated (-0.8 V to -1.2 V vs. SCE). While pulsing the voltage increases the amount of CaCO 3 deposited, the energy required per gram of CaCO 3 is significantly higher (14.5×) when compared to the base case of applying a constant voltage of -0.8 V vs. SCE. Further optimization of pulse conditions, electrode materials, and system configuration could lead to finding parameters that result in exclusively carbonate deposits without compromising precipitation rates, which may prove to be more useful for corrosion protection, coastal infrastructure, and other applications in sustainable development.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

High Performance Flow Battery with Inexpensive Inorganic Reactants: DAYS Program (Final Technical Report)

RTRC’s DAYS projects focused on new flow battery (FB) chemistries for long duration energy storage: one that pairs aqueous polysulfide and manganese active materials in strongly alkaline electrolytes (S/Mn); another explores ligand-modified metal (LMM) chemistries in moderate pH electrolyte conditions. The S/Mn chemistry met durability targets by running for over 500 cycles and 1000 hours. Combined with this durability, power densities of up to 60 mW/cm2 at 80% round-trip efficiency, and exceptionally low-cost S and Mn active materials, the S/Mn FB offers a pathway to meeting the <5¢/kW-hr levelized cost of storage (LCOS) target first proposed by the DAYS Program and accepted by the DOE Energy Storage Grand Challenge. The LMM chemistry made impressive progress as well, including durability tests that retained performance over 600 hours of cycling. Cell optimization allowed this chemistry to operate as high as 500 mW/cm2 at 80% round-trip efficiency, nearly 10x the power density of S/Mn and comparable to the power density achieved in RTRC’s flow battery stacks using acidic vanadium battery solutions. This enabled the LMM chemistry to also offer a pathway to the <5¢/kW-hr LCOS DAYS and DOE targets. The promising results from the LMM chemistry have led to a recent DOE AMO award to advance the technology to a 5 kW, 20 kW-hr prototype.

25 ENERGY STORAGE↗
NASA NTRS1987

Wheat production in controlled environments

Conditions are optimized for maximum yield and quality of wheat to be used in a controlled environment life support system (CELSS) in a Lunar or Martian base or a spacecraft. With yields of 23 to 57 g/sq m/d of edible biomass, a minimum size for a CELSS would be between 12 and 30 sq m per person, utilizing about 600 W/sq m of electrical energy for artificial light. Temperature, irradiance, photoperiod, carbon dioxide levels, humidity, and wind velocity are controlled in growth chambers. Nutrient solutions (adjusted for wheat) are supplied to the roots via a recirculating system that controls pH by adding HNO3 and controlling the NO3/NH4 ratio in solution. A rock-wool plant support allows direct seeding and densities up to 10,000 plants sq m. Densities up to 2000 plants/sq m appear to increase seed yield. Biomass production increases almost linearily with increasing irradiance from 400 to 1700 micromol/sq m/s of photosynthetic photon flux, but the efficiency of light utilization decreases over this range. Photoperiod and temperature both have a profound influence on floral initiation, spikelet formation, stem elongation, and fertilization.

Salisbury, Frank B.↗
DOE OSTI2022

Removal of phosphorus using biochar derived from Fenton sludge: Mechanism and performance insights

Abstract A phosphorus removal biochar adsorbent was prepared from Fenton sludge. The adsorption process was optimized, and its phosphorus adsorption mechanism was discussed. It was found that the phosphorus adsorption performance of biochar prepared from single Fenton sludge (FBC‐400) was better than that of co‐pyrolysis of Fenton sludge and bamboo powder. The optimum condition was that Fenton sludge pyrolyzed at 400°C (FBC‐400). FBC‐400 had a larger specific surface area than that prepared by co‐pyrolysis with bamboo powder. And the high content of iron element could provide a higher surface charge of the biochar, thereby increasing the electrostatic adsorption of phosphorus onto FBC‐400. The phosphorus adsorption was highly pH dependent by FBC‐400, which can enhance electrostatic adsorption and increase adsorption capacity in acidic conditions. The effect of coexisting anion on adsorption performance was mainly affected by CO 3 2− , reducing the adsorption capacity by at least 49%, whereas other anions had no obvious interference. The adsorption process of FBC‐400 accorded with the pseudo‐second‐order kinetic model and the Langmuir model, which indicated that the adsorption process was monolayer adsorption and mainly chemical adsorption, and the maximum saturated phosphorus adsorption capacity was 8.77 mg g −1 . The mechanisms for phosphorus adsorption were electrostatic adsorption and inner‐sphere complexing. 1 M NaOH was used for desorption, and the adsorption capacity remained at 81% in the fifth cycle. Practitioner Points The Fenton sludge biochar usage as an adsorbent could be a win‐win strategy to convert waste biomass to valuable ‐ product. The adsorption process accorded with the Langmuir model, the maximum phosphorus adsorption capacity was 8.77 mg/g at 25°C. The adsorption mechanisms were electrostatic adsorption and inner‐sphere complexing. 1M NaOH was used for desorption, and the adsorption capacity remained at 81% in the fifth cycle.

Liu, Yanfang↗