The JPL standard total-radiation absolute radiometer
Standard total-radiation absolute radiometer with improved accuracy for calibrating radiometers for simulated solar radiation measurement
Kendall, J. M., Sr.↗
SEARCH · Search NASA
Results for “radiometers”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
The JPL standard total radiation absolute radiometer.
Standard total radiation absolute radiometer for calibrating radiometers used for simulated solar sources intensity measurements in space simulators
Kendall, J. M., Sr.↗
Attitude-referenced radiometer study. Part 2: Primary calibration system
A primary calibration system, PCS, for infrared radiometers has been developed, built, and tested. The system allows radiometers to be calibrated with less than 1 percent error for use in earth coverage horizon measurements, earth resources surveys, and synoptic meteorological measurement. The final design, fabrication and test of the PCS are reported. A detailed description of the PCS construction is presented, along with the results of a complete series of functional tests. Test to verify the source thermal characteristics, collimator reflectance, and output beam characteristics are described and their results presented.
Williamson, W. R.↗
Salinity surveys using an airborne microwave radiometer
The Barnes PRT-5 infrared radiometer and L-band channel of the multifrequency microwave radiometer are used to survey the distribution of surface water temperature and salinity. These remote sensors were flown repetitively in November 1971 over the outflow of the Mississippi River into the Gulf of Mexico. Data reduction parameters were determined through the use of flight data obtained over a known water area. With these parameters, the measured infrared and microwave radiances were analyzed in terms of the surface temperature and salinity.
Paris, J. F.↗
Soil moisture measurements with microwave, radiometers
One technique of measuring moisture content that appears promising is that of microwave radiometry. In the microwave region of the spectrum, the emissivity of water is approximately 0.4, whereas that of dry soil is approximately 0.9. Therefore, the emissivity of the soil can range from about 0.6 to 0.9 as the soil changes from a wet to a dry condition. Recent ground base measurements have demonstrated emissivity changes of this magnitude. To test the use of this approach for remote sensing of soil moisture, flights were made over agricultural test sites in the vicinity of Phoenix, Ariz., during late February 1971. On the same day, soil moisture measurements were made on the ground for 200 fields. On board the aircraft were six microwave radiometers, ranging in wavelength from 21 cm to 8 mm. The results of one of these radiometers are presented.
Schmugge, T. J.↗
Arctic ice measurements with microwave radiometers
The application of microwave radiometers for measuring Arctic ice is discussed. The acquisition of Arctic ice data simultaneously on the surface with conventional instruments and remotely with microwave and infrared radiometers, photography, and a laser geodolite is described. A multifrequency view of a large multilayer ice floe is presented. The significance of the data recordings is explained.
Gloersen, P.↗
Smoke Plume Analysis Using Fan-beam and Single-beam Radiometers
Smoke plume data were taken using the stacks of the Mills Road Steam Plant on Redstone Arsenal, Huntsville, Alabama. The fan-beam unit was placed approximately 235 meters east of the Mills Road Steam Plant, and the single-beam unit was placed approximately 80 meters north of the fan-beam unit. Results of the smoke plume measurements indicate that the smoke plume is a periodic process near the mouth of the smokestack. The usefulness of the system is limited because of inaccurate and cumbersome positioning methods and base line constraints due to cable length. It is recommended that the radiometers be mounted on pedestals which have both azimuth and elevation positions determined by digitally controlled stepper drive motors. It is also recommended that a time multiplex system be used to transmit data from the radiometers to the electronics van.
Dodd, J. L.↗
Remote monitoring of soil moisture using airborne microwave radiometers
The current status of microwave radiometry is provided. The fundamentals of the microwave radiometer are reviewed with particular reference to airborne operations, and the interpretative procedures normally used for the modeling of the apparent temperature are presented. Airborne microwave radiometer measurements were made over selected flight lines in Chickasha, Oklahoma and Weslaco, Texas. Extensive ground measurements of soil moisture were made in support of the aircraft mission over the two locations. In addition, laboratory determination of the complex permittivities of soil samples taken from the flight lines were made with varying moisture contents. The data were analyzed to determine the degree of correlation between measured apparent temperatures and soil moisture content.
Kroll, C. L.↗
Electrically scanning microwave radiometer for Nimbus E
An electronically scanning microwave radiometer system has been designed, developed, and tested for measurement of meteorological, geomorphological and oceanographic parameters from NASA/GSFC's Nimbus E satellite. The system is a completely integrated radiometer designed to measure the microwave brightness temperature of the earth and its atmosphere at a microwave frequency of 19.35 GHz. Calibration and environmental testing of the system have successfully demonstrated its ability to perform accurate measurements in a satellite environment. The successful launch and data acquisition of the Nimbus 5 (formerly Nimbus E) gives further demonstration to its achievement.
Source record↗
An economical net solar flux radiometer.
The theory and design of an economical solar flux radiometer readily adaptable to the conventional radiosonde system are presented in response to the need cited by the Atmospheric Radiation Working Group (1971) for the development of an inexpensive light-weight short-wave radiometer sonde. Prototype instrument tests and current modifications are discussed. It is shown that the basic instrument can be easily modified to measure separately the upward and downward directed flux components, in addition to the net flux.
Darkow, G. L.↗
Investigations of atmospheric extinction using direct solar radiation measurements made with a multiple wavelength radiometer.
A multiple wavelength solar radiometer designed for the purpose of measuring atmospheric optical depth at discrete wavelengths through the visible region is described. Experimental techniques, including sample observations, are presented for obtaining atmospheric optical depth from radiometer measurements. These techniques apply for conditions where the optical depth is either temporally variant or invariant during the course of a day. The influence of the aerosol size distribution on optical depth is investigated. Theoretical calculations of the wavelength dependency of the aerosol optical depth contribution are presented for several representative aerosol size distributions. Methods are also presented for estimating the aerosol size distribution and aerosol mass loading from multiwavelength optical depth measurements.
Shaw, G. E.↗
Very high resolution radiometer /VHRR/
Discussion of the design and performance of the very high resolution radiometer (VHRR) representing the first of a second-generation of infrared scanning radiometers of high performance. Following a description of the optical, signal-electronics, sync-generator, scan-drive, cooler, and contamination-protection design, it is pointed out that the two VHRRs presently operating have logged a total of 15,500 hrs of continuous successful operation since launch. The cooler operation has been particularly noteworthy. The cold plate heater power, required to maintain the detectors at 105 K, has undergone in almost a year's operation so small a degradation as to indicate a VHRR cooler lifetime exceeding the instrument design lifetime of one year by a large margin. High resolution, low noise, and jitter-free pictures are shown to have been derived from these instruments.
Aronson, A. I.↗
Transmission of radiometer data from the Synchronous Meteorological Satellite
The Synchronous Meteorological Satellite uses a spin scanner radiometer which generates eight visual signals and two infrared signals. These signals are multiplexed and converted into a 28-Mbps data stream. This signal is transmitted to ground by quadriphase modulation at 1686.1 MHz. On the ground, the digital signal is reconstructed to an analog signal. To conserve bandwidth, an analog-to-digital converter with a nonlinear transfer function was used for the visual signals. The size of the quantization step was made proportional to the noise output of the scanner photomultiplier tube which increases as the square root of incident light. The radiometer data transmission link was simulated on a digital computer to determine the transfer function. Some results of the simulation are shown.
Davies, R. S.↗
An S-band radiometer design with high absolute precision
A radiometer for the remote measurement of sea surface temperature is described. The development of an instrument capable not only of high relative accuracy (i.e., resolution) but also of high absolute precision is considered. The concepts underlying the design of an instrument capable of an absolute accuracy of a few tenths degrees Kelvin in the measurement of brightness temperature at S band are described. The role of the antenna is discussed, and the importance of high ohmic and beam efficiencies is stressed. The hardware itself is fully described, along with an outline concerning the design of a unique cryogenically cooled termination used to calibrate the whole radiometer, including antenna. Finally, some test results are presented that show that the design goals for the instrument have been closely approached.
Hardy, W. N.↗
Tropical cyclone rainfall as measured by the Nimbus 5 electrically scanning microwave radiometer
A selected group of 1973 North Pacific Ocean tropical cyclones was studied by using data from the Nimbus 5 Electrically Scanning Microwave Radiometer (ESMR), the Temperature-Humidity Infrared Radiometer (THIR), NOAA-2 and USAF DMSP imageries. From the unique combination of infrared, visible, and microwave data, it was possible during various stages of storm development to differentiate between dense cirrus outflow and rain areas, to identify centers of circulation and areas of low-level moisture, and by the use of a theoretical model to estimate semi-quantitatively areas of light, moderate, and heavy rainfall rates.
Allison, L. J.↗
Antenna pattern corrections to microwave radiometer temperature calculations
In making microwave radiometer calculations of sea surface temperature, it is necessary to consider the errors resulting from the antenna radiation pattern. This is especially true for antennas with high sidelobes that are scanned in viewing angle and for antennas with high cross-polarized components. It is concluded that the plane wave brightness temperature is not by itself sufficient to describe the true radiometer temperature of the sea surface. This discrepancy can be attributed to one or more of the following: failure to use the total radiation pattern, error in determining the sea surface dielectric constant, error in sky model profile, or radiation pattern spillover onto water surroundings.
Beck, F. B.↗
Design Data Collection with Skylab Microwave Radiometer-Scatterometer S-193, Volume 1
The author has identified the following significant results. Observations with S-193 have provided radar design information for systems to be flown on spacecraft, but only at 13.9 GHz and for land areas over the United States and Brazil plus a few other areas of the world for which this kind of analysis was not made. Observations only extended out to about 50 deg angle of incidence. The value of a sensor with such a gross resolution for most overland resource and status monitoring systems seems marginal, with the possible exception of monitoring soil moisture and major vegetation variations. The complementary nature of the scatterometer and radiometer systems was demonstrated by the correlation analysis. Although radiometers must have spatial resolutions dictated by antenna size, radars can use synthetic aperture techniques to achieve much finer resolutions. Multiplicity of modes in the S-193 sensors complicated both the system development and its employment. An attempt was made in the design of the S-193 to arrange optimum integration times for each angle and type of measurement. This unnecessarily complicated the design of the instrument, since the gains in precision achieved in this way were marginal. Either a software-controllable integration time or a set of only two or three integration times would have been better.
Moore, R. K.↗
HELIOS dual swept frequency radiometer
The HELIOS dual swept frequency radiometer, used in conjunction with a dipole antenna, was designed to measure electromagnetic radiation in space. An engineering prototype was fabricated and tested on the HELIOS spacecraft. Two prototypes and two flight units were fabricated and three of the four units were integrated into the HELIOS spacecraft. Two sets of ground support equipment were provided for checkout of the radiometer.
White, J. R.↗