Search NASA⌕ Search

SEARCH · Search NASA

Results for “solving”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Management of Risks Associated with Application of Novel Materials in Novel Operating Environments in Novel Reactor Designs

There is currently no widely agreed, detailed general method for licensing a novel plant incorporating novel materials (or materials being deployed in novel environments); in many such situations, there are no directly applicable engineering code cases for decision-makers (including regulators) to rely on. This paper discusses a framework for solving this problem that is based on the Reliability and Integrity Management (RIM) approach delineated in ASME BPVC Section XI Division 2. NRC Regulatory Guide 1.246, Rev. 0, endorses, with conditions, the subject portion of the ASME Code. The proposed framework is meant to support development of a licensing case by addressing certain technical challenges. The framework discussed here is compatible with the Licensing Modernization Project, but applying it in a specific case will call for advances in the state of practice, if not the state of the art. The RIM approach calls for applicants to (a) allocate reliability targets to plant structures, systems, and components (SSCs), (b) show that they are able to relate the currently observed physical condition of each SSC in the program to its failure probability well enough to determine whether the target reliability allocations are being satisfied, allowing for uncertainty related to the novelty of the materials/designs/operating environments, and (c) be able to demonstrate that the proposed program of surveillances will reliably detect unacceptable degradation of an SSC before SSC failure occurs. These challenges are discussed in the paper, and a potentially applicable modeling approach based on cumulative damage rather than failure rates is briefly illustrated.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2024

Stochastic minibatch approach to the ptychographic iterative engine

The ptychographic iterative engine (PIE) is a widely used algorithm that enables phase retrieval at nanometer-scale resolution over a wide range of imaging experiment configurations. By analyzing diffraction intensities from multiple scanning locations where a probing wavefield interacts with a sample, the algorithm solves a difficult optimization problem with constraints derived from the experimental geometry as well as sample properties. The effectiveness at which this optimization problem is solved is highly dependent on the ordering in which we use the measured diffraction intensities in the algorithm, and random ordering is widely used due to the limited ability to escape from stagnation in poor-quality local solutions. In this study, we introduce an extension to the PIE algorithm that uses ideas popularized in recent machine learning training methods, in this case minibatch stochastic gradient descent. Our results demonstrate that these new techniques significantly improve the convergence properties of the PIE numerical optimization problem.

47 OTHER INSTRUMENTATION↗
DOE OSTI2024

Seismic Tomography 2024

Seismic tomography is the most abundant source of information about the internal structure of the Earth at scales ranging from a few meters to thousands of kilometers. It constrains the properties of active volcanoes, earthquake fault zones, deep reservoirs and storage sites, glaciers and ice sheets, or the entire globe. It contributes to outstanding societal problems related to natural hazards, resource exploration, underground storage, and many more. The recent advances in seismic tomography are being translated to nondestructive testing, medical ultrasound, and helioseismology. Nearly 50 yr after its first successful applications, this article offers a snapshot of modern seismic tomography. Focused on major challenges and particularly promising research directions, it is intended to guide both Earth science professionals and early-career scientists. The individual contributions by the coauthors provide diverse perspectives on topics that may at first seem disconnected but are closely tied together by a few coherent threads: multiparameter inversion for properties related to dynamic processes, data quality, and geographic coverage, uncertainty quantification that is useful for geologic interpretation, new formulations of tomographic inverse problems that address concrete geologic questions more directly, and the presentation and quantitative comparison of tomographic models. Finally, it remains to be seen which of these problems will be considered solved, solved to some extent, or practically unsolvable over the next decade.

58 GEOSCIENCES↗
DOE OSTI2024

Multiphysics modeling of accelerators through code integration

This work aims to improve the ability of particle accelerator researchers to develop high-performance accelerator cavity designs by creating an overall multiphysics framework that integrates and couples existing application codes. This framework will allow accelerator researchers to build multiphysics models that will optimize cavity design, improve understanding of whole-device performance, and reduce the development and fabrication costs of accelerator research. We utilize the open-source VizSchema data standard as an intermediate data structure interface layer to standardize interfaces between individual application codes. VizScema is extensively documented online, and plugins for VizSchema are available for popular visualization packages, including VisIt and ParaView. Currently, the work focuses on coupling the EM field solver COMSOL and the electron gun code MICHELLE to allow COMSOL field-solve results to be seamlessly used by MICHELLE for particle-solve. Later work will extend this integration to include other fields, particles, and thermodynamics simulation codes.

43 PARTICLE ACCELERATORS↗
DOE OSTI2025

The Alamo multiphysics solver for phase field simulations with strong-form mechanics and block structured adaptive mesh refinement

Alamo is a high-performance scientific code that uses block-structured adaptive mesh refinement to solve such problems as: the ignition and burn of solid rocket propellant, plasticity, damage and fracture in materials undergoing loading, and the interaction of compressible flow with eroding solid materials. Alamo is powered by AMReX, and provides a set of unique methods, models, and algorithms that enable it to solve solid-mechanics problems (coupled to other physical behavior such as fluid flow or thermal diffusion) using the power of block-structured adaptive mesh refinement.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Preserving Superconvergence of Spectral Elements for Curved Domains

Spectral element methods (SEM), extensions of finite element methods (FEM), have emerged as significant techniques for solving partial differential equations in physics and engineering. SEM can potentially deliver superior accuracy due to the potential superconvergence in nodal solutions for well-shaped tensor-product elements. However, the accuracy of SEM often degrades in complex geometries due to geometric inaccuracies near curved boundaries and the loss of superconvergence with simplicial or non-tensor-product elements. To overcome the first issue, we propose using geometric refinement, which both refines the mesh near high-curvature regions and increases the degree of geometric basis functions. We show that when using mixed-element meshes with tensor-product elements in the interior of the domain, curvature-based geometric refinement near boundaries can improve the accuracy of the interior elements by reducing pollution errors and preserving the superconvergence in nodal solutions. To address the second issue, we introduce ApSEM, a post-processing technique using the adaptive extended stencil finite element method (AES-FEM) to recover the accuracy near the curved boundaries. The combination of curvature-based geometric refinement and accurate post-processing offers an effective and easier-to-implement alternative to methods reliant on exact geometries. We demonstrate our techniques by solving the convection-diffusion equation in 2D and 3D and show up to two orders of magnitude of improvement in the solution accuracy, even when the elements are poorly shaped near boundaries. We also show the efficiency of ApSEM as it can recover superconvergence in nodal solutions without drastically increasing the computational cost.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2024

Annual IC Progress Report

The goal of this project is to computationally investigate the progenitors of astrophysical gamma-ray bursts (GRB), the most extreme explosions in the universe across length and time scales. We have developed a cutting-edge, code-bridging approach to exploring the physics behind these luminous events to test the hypothesis that GRBs with electromagnetic radio emission originate from massive star (MS) and black hole (BH) binary systems. Our multi-scale, multi-physics theoretical framework for GRBs is based on solving well-defined and testable hydrodynamics problems associated with the dynamical evolution of the system. We solve stages of the evolution in a tractable way with a suite of well-developed state-of-the-art computational tools that include the stellar evolution code MESA, the general relativistic magnetohydrodynamics (GRMHD) code Athena++, and the binary black hole (BBH) population synthesis code COSMIC, as well as a number of self-written python post-processing tools.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2024

Efficient Reformulation and Optimization for SC-ACOPF with Line Switching

This project aims to develop efficient and robust computational methods for solving the security-constrained alternating current optimal power flow problem (SC-ACOPF). The SC-ACOPF problem is a central problem in operating the electric power grids in the United States. It determines the most economically efficient way to operate the generation and transmission system to meet daily electricity demand. The solution found by solving an SC-ACOPF problem must satisfy the physics of the alternating current (AC) power flows, various generator and network operational constraints, and must maintain secure operation under various contingency scenarios, where a generator, a transmission branch, or a transformer may unexpectedly trip offline.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2024

Engineered Microorganisms for Enhanced Rare Earth Element Bio-mining and Separations (Final Technical Report)

Rare earth elements (REE) are critical ingredients of sustainable energy technologies, but their extraction from ore and separation from one another pose formidable challenges. To solve the challenge of REE supply, we used advanced genomics, high-throughput screening with synthetic REE minerals, and synthetic biology to engineer two sets of exotic microbes to (1) extract REE from ores, spent cracking catalysts, coal ash and electronic waste with high efficiency and selectivity, and (2) to purify REE into single element batches, all under benign conditions without the need of harsh solvents and high temperatures. This work integrated our expertise in systems and synthetic biology (Buz Barstow); rare-earth geochemistry (Esteban Gazel) and mineral synthesis (Megan Holycross); and microsystems engineering (Mingming Wu) by first elucidating the set of rules that predict an organism’s phenotype and then applying them to solve this critical problem in sustainable energy. These new technologies could help to revitalize the US rare earth industry and provide a new source of these critical elements for future energy technologies. We have already had some big success in tech transfer. Two of our team members (postdoctoral fellow Alexa Schmitz and graduate student Sean Medin) were able to study the supply chain for REE in the United States, and identify an opportunity to commercialize our REE mineral-dissolution technology. Alexa and Sean recently founded REEgen, Inc., an REE biomining company. Dr. Schmitz was recently awarded a fellowship from the Activate Foundation to support the first two years of REEgen. Cornell showed its support for this technology and company, and Dr. Schmitz was awarded the Rising Women Innovator’s award. These two awards unlocked support from Cornell’s Praxis Incubator.

58 GEOSCIENCES↗
DOE OSTI2024

Report for the ASCR Workshop on Basic Research Needs in Quantum Computing and Networking - 2023

Employing quantum mechanical resources in computing and networking opens the door to new computation and communication models and potential disruptive advantages over classical counterparts. However, quantifying and realizing such advantages face extensive scientific and engineering challenges. Investments by the Department of Energy (DOE) have driven progress toward addressing such challenges. Quantum algorithms have been recently developed, in some cases offering asymptotic exponential advantages in speed or accuracy, for fundamental scientific problems such as simulating physical systems, solving systems of linear equations, or solving differential equations. Empirical demonstrations on nascent quantum hardware suggest better performance than classical analogs on specialized computational tasks favorable to the quantum computing systems. However, demonstration of an end-to-end, substantial and rigorously quantifiable quantum performance advantage over classical analogs remains a grand challenge, especially for problems of practical value. The definition of requirements for quantum technologies to exhibit scalable, rigorous, and transformative performance advantages for practical applications also remains an outstanding open question, namely, what will be required to ultimately demonstrate practical quantum advantage?

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2024

Multigrid Reduction in Time for Chaotic and Hyperbolic Problems (Final Report)

The coming massive parallelism of exascale computing presents a pressing challenge for the many DOE simulations of time-dependent partial differential equations (PDEs), which typically use traditional sequential time stepping methods. Since this traditional approach is inherently serial, it presents a sequential bottleneck when moving to exascale computing, because future performance gains will come through greater concurrency, not faster clock speeds. Thus, the goal of this work is to research parallelism in time, i.e., methods that compute multiple time values simultaneously, not sequentially. The focus will be on hyperbolic and chaotic problems of interest to DOE, with the goal of enabling scalable simulations of time-dependent hyperbolic and chaotic problems on future architectures. The chosen methodology for solving these problems parallel-in-time is multigrid, because multigrid (when it works) is a powerful, optimal, and scalable solver for discretized PDEs. Multigrid is already commonly used in many DOE simulations for scalably and optimally solving space-only PDE problems. The areas of hyperbolic and chaotic problems are chosen because of their relevance to problems of programmatic interest to DOE. However, these problems are also well-known to be difficult for parallel-in-time methods, with the most common method, parareal, diverging in many cases. The current state of-the-art for parallel-in-time at LLNL is the multigrid reduction in time (MGRIT) XBraid package, which also struggles for such problems, while still showing some improvement over parareal. In summary, new methods are needed for an efficient parallel-in-time scheme for hyperbolic and chaotic problems, and this work shall research promising new multigrid methods in this area. In particular, this work shall continue researching the directions from the current collaboration with Dr. Falgout, which are laid out in the work Toward Parallel in Time for Chaotic Dynamical Systems and showed the first known results of a parallel-in-time speedup for a chaotic problem. This work outlines two key improvements to XBraid for chaotic problems, the so-called “theta” and “delta-correction” methods. Here, these two improvements will be further researched and improved (including with a new relaxation method inspired by on Least Squares Shadowing (LSS)) and explored for more complicated problems.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2024

Scale-Bridging Optimization Framework for Desalination Integrated Produced Water Networks

In this work, we develop a Pyomo-based non-linear optimization strategy that includes rigorous MVR models. The detailed desalination unit is integrated into the multiperiod produced water network problem using the trust region filter (TRF) method. TRF decomposes the integrated problem into a master problem consisting of the network variables and a simplified surrogate model for the detailed desalination unit. The surrogate is updated using zero and first-order corrections from the optimal solution of the detailed models at every iteration. This framework allows us to co-optimize the design of the desalination units and operating policy for the multiperiod network. A common design is ensured across all periods using global capacity constraints. We validate the solution obtained using the TRF method by solving the full integrated problem for small network instances and show our results on real case studies on produced water networks from the Permian and Appalachian basins. In this work, we describe our TRF formulation, give details on our implementation in Pyomo, and analyze the results obtained by solving the optimization problem using IPOPT. We also present a discussion on the computational efficiency and scaling using the TRF approach against a full-scale integration of the rigorous models within the water network.

Naik, Sakshi↗
DOE OSTI2024

Unconventional Quantum Advantages for Computation (U-QuAC)

While quantum computing offers the promise of exponential advantages, limited quantum speedups are known, especially for practical applications. To open new avenues for quantum advantages, we propose Unconventional Quantum Advantages for Computation (U-QuACs), with respect to unconventional resources such as space (number of bits or quantum bits of memory required to solve a problem), accuracy of solution, communication, or energy consumption. We focus on space-efficient quantum algorithms, where we seek to design algorithms that solve a problem using much less space than the total size of the input. A natural setting in which space is critical is the streaming model of computation, where the input data arrives sequentially in pieces that must each be processed individually. Streaming is motivated by a variety of problems including analysis of internet traffic or social networks. We design the first exponential quantum space advantage for a natural streaming problem, which also constitutes the first quantum advantage for approximating a discrete optimization problem, albeit with respect to space.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2024

A Low-Rank QTT-based Finite Element Method for Elasticity Problems

We present an efficient and robust numerical algorithm for solving the linear elasticity problem that combines the Quantized Tensor Train format and a domain partitioning strategy. This approach makes it possible to solve the linear elasticity problem on a computational domain that is more general than a square. By integrating Z-ordering and subdomain concatenation, our method substantially decreases memory usage and achieves a notable reduction in rank compared to established Finite Element implementations like the FEniCS platform. This efficiency is maintained while still guaranteeing exponential convergence with respect to the number of degrees of freedom. This performance gain, however, requires a fundamental rethinking of how core finite element operations are implemented. This includes changes to mesh discretization, node and degree of freedom ordering, stiffness matrix and internal nodal force assembly, and the execution of algebraic matrix-vector operations. In this work, we discuss all these aspects in detail and assess the method’s performance in the numerical approximation of three representative test cases.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2025

Si-Cr-Al-Mn Alloy for High Specific Resistivity

Laboratory material produced in budget period one met the target resistivity, mechanical and magnetic requirements for the Go/No-Go decision to move to industrial trials. The chosen chemistry settled on a high Cr strategy, with moderate Mn and Al additions, providing a good comprise on core loss and induction with minimal impact on mechanical properties, important to successful downstream processing. Industrial trials began in budget period two with the chosen chemistry, referred to as Alloy X. Difficulties occurred during initial hot rolling trials. Reheating the material using the standard NOES practice caused slab cracking from high thermal gradients in areas exposed to the roof burners, this was solved using a modified reheat practice. High Cr caused poor dynamic recrystallization during hot rolling, which was solved using a modified hot rolling practice. The high Cr content of the steel also caused poor decarburization during final annealing, which necessitated lowering the melt carbon aim for the final heat, together with a modified decarburization practice. Steel was finished to final thicknesses of 0.20 – 0.50 mm and evaluated for magnetic and mechanical properties. Although the target core loss for the 0.25 and 0.35 mm material was not achieved, significant reductions in high frequency core loss were measured, compared to equivalent commercially available material. Alloy X at 0.35 mm showed a 26 % and 23 % improvement at 400 HZ and 1000 Hz respectively, over Cliffs’ M-19 (0.35 mm) commercially available NOES. At 0.25 mm, Alloy X showed a 23 % and a 26 % improvement at 400 HZ and 1000 Hz respectively, over Cliffs’ HF-10 (0.25 mm) commercially available NOES. The 0.25 mm product was chosen for motor efficiency evaluation. ORNL collaborated with Cleveland-Cliffs (CC) to build, assemble, and test two 5HP motors: a baseline motor with M19 steel and a motor made with high efficiency steel (Alloy X) developed for the project. Overall, results were as expected with comparable performance at low speeds, and with more than 8% efficiency improvement for high speeds. Increased motor steel efficiency at high frequencies not only results in direct efficiency improvements but can yield reductions in motor size and cost by facilitating higher operation speeds, or by increasing the number of poles in the machine. This allows the production of more power-dense motors which are sometimes avoided with conventional material due to increased core losses. The material developed on this project provides more viable options for achieving improved motor efficiency or reduced motor size and cost.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Radiation Hardened Engineered Substrates for Time and Space Resolution

Low Gain Avalanche Diodes (LGADs) have become sensors of choice for fast timing of minimum ionizing particles. The current generation of these devices suffer from only moderate radiation hardness, low fill factor, and limited design options. Cactus Materials Inc. proposes to develop sensors with gain layer implants buried beneath the surface which will, with AC coupling developed by Brookhaven National Laboratory (BNL) and University of California Santa Cruz (UC Santa Cruz) solve these problems. Fermilab has a major role in the CMS timing upgrade using the current generation of LGADs and development of AC-coupled, buried layer LGADs will solve some of the central problems inherent in this technology. Annex B included a two-year work plan, deliverables, schedule and funding for the project’s SBIR Phase II award to develop and test prototype LGADs utilizing wafer bonding technology and epitaxial growth, that will allow for fabrication of radiation hard AC coupled devices with 100% fill factor and adjustable operating point.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2025

Virtual to Physical: Reinforcement Learning to Optimize SNS Particle Accelerator Controls

Complex accelerators must have control systems that can handle dynamic nonlinear environments. This makes traditional control methods unsuitable as they can struggle to adapt to these uncertainties. This provides an ideal environment for reinforcement learning algorithms as they are adaptable and generalizable. We present a reinforcement learning pipeline that can effectively handle the dynamics of a complex accelerator. We test and prove our pipelines capabilities on multiple environments including the Spallation Neutron Source (SNS) and the Beam Test Facility (BTF) at Oakridge National Lab (ORNL). Due to the limited time available to train an online algorithm like reinforcement learning on a real accelerator, we utilize a virtual twin accelerator (VIRAC) developed by ORNL to pretrain the policy and show its ability to converge in the virtual environment. We then test the adaptability of the pretrained RL model by applying it on the real accelerator and comparing the results. Utilizing our Scientific Optimization and Controls Toolkit (SOCT) and open-source standards such as Gymnasium we create and solve for a MEBT orbit correction problem in the SNS and an emittance maximization problem in the BTF. We show how Twin Delayed Deep Deterministic Policy Gradient (TD3) can solve this optimization environment in the virtual accelerator and transfer this policy onto the real accelerator for inference and model retraining. We show how reinforcement learning can be utilized as a control system for complex accelerators and provide a model pipeline for how an implementation performs and can be adapted to new accelerator control problems.

Kasparian, Armen [Thomas Jefferson National Accele↗
DOE OSTI2025

Machine learning models for PDE constrained optimization

Partial differential equation (PDE)-constrained optimization problems arise in a variety of scientific and engineering applications, such as topology optimization, electrodynamics, fluid dynamics, and structural dynamics. However, these problems are often challenging and computationally expensive to solve, due to the need to solve the PDEs within the optimization loop. One approach to reducing the computational cost of these methods while providing convergence guarantees is through inexact trust region methods; this method uses lower fidelity solutions of the PDE at early stages of the optimization and adjusts the required accuracy of inexact PDE solvers as the optimization progresses. In this work, we explore the use of machine learning based surrogate models with these inexact trust region methods. We first demonstrate the potential of this approach by using Gaussian processes as the surrogate model and test this on a simple PDE-constrained optimization problem. We then document explorations into improving the computational costs of evolutional deep neural network / neural Galerkin methods, with the eventual goal of using these methods with the inexact trust region algorithms. We are able to speed up these approaches, albeit at the cost of lower accuracy.

97 MATHEMATICS AND COMPUTING↗