Search NASA⌕ Search

SEARCH · Search NASA

Results for “Control Theory”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16
All sourcesNASA NTRSDOE OSTI
NASA NTRS1983

Adaptive flutter suppression, analysis and test

Methods of adaptive control have been applied to suppress a potentially violent flutter condition of a half-span model of a lightweight figher aircraft. This marked the confluence of several technologies with active flutter suppression, digital control and adaptive control theory the primary contributors. The control algorithm was required to adapt both to slowly varying changes, corresponding to changes in the flight condition or fuel loading and to rapid changes, corresponding to a store release or the transition from a stable to an unstable flight condition. The development of the adaptive control methods was followed by a simulation and checkout of the complete system and a wind tunnel demonstration. As part of the test, a store was released from the model wing tip, transforming the model abruptly from a stable configuration to a violent flutter condition. The adaptive algorithm recognized the unstable nature of the resulting configuration and implemented a stabilizing control law in a fraction of a second. The algorithm was also shown to provide system stability over a range of wind tunnel Mach numbers and dynamic pressures.

Johnson, E. H.↗
NASA NTRS1987

Approximate Feedback Control for a System With Memory

Report presents algorithm for calculating feedback gain for control of hereditary dynamical systems with control delay. Problem is to approximate optimal feedback gain that minimizes cost function of state and control. Theory applicable to design of controllers for mechanical systems subject to thermal deformation, electrical systems with delay, electrical systems with plasma components, and other systems that exhibit memory.

Milman, Mark H.↗
NASA NTRS1993

Joint University Program for Air Transportation Research, 1991-1992

This report summarizes the research conducted during the academic year 1991-1992 under the FAA/NASA sponsored Joint University Program for Air Transportation Research. The year end review was held at Ohio University, Athens, Ohio, June 18-19, 1992. The Joint University Program is a coordinated set of three grants sponsored by the Federal Aviation Administration and NASA Langley Research Center, one each with the Massachusetts Institute of Technology (NGL-22-009-640), Ohio University (NGR-36-009-017), and Princeton University (NGL-31-001-252). Completed works, status reports, and annotated bibliographies are presented for research topics, which include navigation, guidance and control theory and practice, intelligent flight control, flight dynamics, human factors, and air traffic control processes. An overview of the year's activities for each university is also presented.

Morrell, Frederick R.↗
NASA NTRS1993

PACE: A test bed for the dynamics and control of flexible multibody systems

The Phillips Laboratory at Edwards AFB has constructed a test bed for the validation and comparison of modeling and control theories for the dynamics and control of flexible multibody systems. This project is called the Planar Articulating Controls Experiment (PACE). This paper presents the experimental apparatus for PACE and the problem formulation. An in-depth analysis on DC motor dynamics was also performed.

Kwak, Moon K.↗
NASA NTRS2004

Hierarchical Discrete Event Supervisory Control of Aircraft Propulsion Systems

This paper presents a hierarchical application of Discrete Event Supervisory (DES) control theory for intelligent decision and control of a twin-engine aircraft propulsion system. A dual layer hierarchical DES controller is designed to supervise and coordinate the operation of two engines of the propulsion system. The two engines are individually controlled to achieve enhanced performance and reliability, necessary for fulfilling the mission objectives. Each engine is operated under a continuously varying control system that maintains the specified performance and a local discrete-event supervisor for condition monitoring and life extending control. A global upper level DES controller is designed for load balancing and overall health management of the propulsion system.

Yasar, Murat↗
NASA NTRS1987

Control-System Design Program

Control-theory design package, Optimal Regulator Algorithms for Control of Linear Systems (ORACLS), developed to aid in design of controllers and optimal filters for systems modeled by linear, time-invariant differential and difference equations. Optimal linear quadratic regulator theory, Linear-Quadratic-Gaussian (LQG) problem, most widely accepted method of determining optimal control policy. Provides for solution to time-in-variant continuous or discrete LQG problems. Attractive to control-system designer providing rigorous tool for dealing with multi-input and multi-output dynamic systems in continuous and discrete form. CDO version written in FORTRAN IV. VAX version written in FORTRAN 77.

Frisch, Harold P.↗
DOE OSTI2022

Maintaining Trust in Reduction: Preserving the Accuracy of Quantities of Interest for Lossy Compression

As the growth of data sizes continues to outpace computational resources, there is a pressing need for data reduction techniques that can significantly reduce the amount of data and quantify the error incurred in compression. Compressing scientific data presents many challenges for reduction techniques since it is often on non-uniform or unstructured meshes, is from a high-dimensional space, and has many Quantities of Interests (QoIs) that need to be preserved. To illustrate these challenges, we focus on data from a large scale fusion code, XGC. XGC uses a Particle-In-Cell (PIC) technique which generates hundreds of PetaBytes (PBs) of data a day, from thousands of timesteps. XGC uses an unstructured mesh, and needs to compute many QoIs from the raw data, f.One critical aspect of the reduction is that we need to ensure that QoIs derived from the data (density, temperature, flux surface averaged momentums, etc.) maintain a relative high accuracy. We show that by compressing XGC data on the high-dimensional, nonuniform grid on which the data is defined, and adaptively quantizing the decomposed coefficients based on the characteristics of the QoIs, the compression ratios at various error tolerances obtained using a multilevel compressor (MGARD) increases more than ten times. We then present how to mathematically guarantee that the accuracy of the QoIs computed from the reduced f is preserved during the compression. We show that the error in the XGC density can be kept under a user-specified tolerance over 1000 timesteps of simulation using the mathematical QoI error control theory of MGARD, whereas traditional error control on the data to be reduced does not guarantee the accuracy of the QoIs.

Gong, Qian↗
NASA NTRS1971

Application of quadratic optimization to supersonic inlet control

The application of linear stochastic optimal control theory to the design of the control system for the air intake (inlet) of a supersonic air-breathing propulsion system is discussed. The controls must maintain a stable inlet shock position in the presence of random airflow disturbances and prevent inlet unstart. Two different linear time invariant control systems are developed. One is designed to minimize a nonquadratic index, the expected frequency of inlet unstart, and the other is designed to minimize the mean square value of inlet shock motion. The quadratic equivalence principle is used to obtain the best linear controller that minimizes the nonquadratic performance index. The two systems are compared on the basis of unstart prevention, control effort requirements, and sensitivity to parameter variations.

Lehtinen, B.↗
NASA NTRS1972

Application of quadratic optimization to supersonic inlet control.

This paper describes the application of linear stochastic optimal control theory to the design of the control system for the air intake, the inlet, of a supersonic air-breathing propulsion system. The controls must maintain a stable inlet shock position in the presence of random airflow disturbances and prevent inlet unstart. Two different linear time invariant controllers are developed. One is designed to minimize a nonquadratic index, the expected frequency of inlet unstart, and the other is designed to minimize the mean square value of inlet shock motion. The quadratic equivalence principle is used to obtain a linear controller that minimizes the nonquadratic index. The two controllers are compared on the basis of unstart prevention, control effort requirements, and frequency response. It is concluded that while controls designed to minimize unstarts are desirable in that the index minimized is physically meaningful, computation time required is longer than for the minimum mean square shock position approach. The simpler minimum mean square shock position solution produced expected unstart frequency values which were not significantly larger than those of the nonquadratic solution.

Lehtinen, B.↗
NASA NTRS1972

Automatic Control of Personal Rapid Transit Vehicles

The requirements for automatic longitudinal control of a string of closely packed personal vehicles are outlined. Optimal control theory is used to design feedback controllers for strings of vehicles. An important modification of the usual optimal control scheme is the inclusion of jerk in the cost functional. While the inclusion of the jerk term was considered, the effect of its inclusion was not sufficiently studied. Adding the jerk term will increase passenger comfort.

Smith, P. D.↗
NASA NTRS1973

The development of a pseudo-nyquist analysis technique for hybrid sampled-data control systems

The stability characteristics of a launch vehicle, as a function of gain and phase variations at the thrust vector controller, cannot be obtained using classical sampled-data control theory if the launch vehicle attitude control system contains both sampled-data and continuous feedback control loops. A method was developed which can be used to generate a sampled-data pseudo-Nyquist plot for gain and phase variations at the controller. This method was developed and used to determine the stability characteristics of the Saturn 1B launch vehicle in the backup guidance mode.

Burnitt, M. G.↗
NASA NTRS1973

The preview control problem with application to man-machine system analysis

The preview control problem is formulated in a general form and its solution is obtained. The analytical tool used is discrete stochastic optimal control theory. Aiming the application to manual control situations with preview, time delay, observation noise, motor noise, etc. were included in formulating the problem. Manual preview control experiments were performed to qualitatively check the validity of the model, and it was found that the mechanism of the manual control problem was explained by the developed model.

Tomizuka, M.↗
NASA NTRS1979

Stochastic control and the second law of thermodynamics

The second law of thermodynamics is studied from the point of view of stochastic control theory. We find that the feedback control laws which are of interest are those which depend only on average values, and not on sample path behavior. We are lead to a criterion which, when satisfied, permits one to assign a temperature to a stochastic system in such a way as to have Carnot cycles be the optimal trajectories of optimal control problems. Entropy is also defined and we are able to prove an equipartition of energy theorem using this definition of temperature. Our formulation allows one to treat irreversibility in a quite natural and completely precise way.

Brockett, R. W.↗
NASA NTRS1979

Controllability and observability for flexible spacecraft

Current interest in extended sensing and actuation for the control of flexible spacecraft has led to the use of modern multivariable control theory and the associated concepts of controllability and observability. This paper shows how to evaluate these properties on a mode-by-mode basis for flexible spacecraft control analysis. Relatively simple criteria are derived which indicate the degree of controllability (observability) of each mode in simple literal terms. These criteria provide physical insight and practical guidance on the type, number, and positioning of sensors and actuators. The results are interpreted for force and torque actuators, and for attitude and deformation measurements. To illustrate these ideas, sample controllability and observability 'surfaces' are presented for the Purdue generic flexible spacecraft model.

Hughes, P. C.↗
NASA NTRS1981

Engine health monitoring: An advanced system

The advanced propulsion monitoring system is described. The system was developed in order to fulfill a growing need for effective engine health monitoring. This need is generated by military requirements for increased performance and efficiency in more complex propulsion systems, while maintaining or improving the cost to operate. This program represents a vital technological step in the advancement of the state of the art for monitoring systems in terms of reliability, flexibility, accuracy, and provision of user oriented results. It draws heavily on the technology and control theory developed for modern, complex, electronically controlled engines and utilizes engine information which is a by-product of such a system.

Dyson, R. J. E.↗
NASA NTRS1986

Variable Control Port for Fluidic Control Device

Volume and velocity of control flow independently adjustable. In proposed device rotatable D-shaped control sector throttles down control port or open it completely and set to any intermediate control-port crosssectional area. Although adjustment affects volume and control-port head loss, volume and velocity controlled independently by also adjusting fluidsupply pressure. Allows adjustment to wider range of control conditions and ability to maximize control efficiency. Fluidic control theory suggests possibility of improvement in control ratio of at least 2:1 over conventional devices.

Collins, Earl R., Jr.↗
NASA NTRS1990

Robust H(infinity) control design for the Space Station with structured parameter uncertainty

A robust H(infinity) control design methodology and its application to a Space Station attitude and momentum control problem are presented. This new approach incorporates nonlinear multiparameter variations in the state-space formulation of H(infinity) control theory. An application of this robust control synthesis technique tothe Space Station control problem yields a remarkable result in stability robustness with respect to the moments-of-inertia variation of about 73 percent in one of the structured uncertainty directions. The performance and stability of this new robust H(infinity) controller for the Space Station are compared to those of other controllers designed using a standard linear-quadratic-regulator synthesis technique.

Byun, Kuk-Whan↗
NASA NTRS1989

Uncertainty modelling for the control of an active structure

Two approaches to uncertainty modeling of a precision active truss structure for control design are presented. The first approach is based on the H(infinity) optimal control theory, which is used for robust control design with an additive uncertainty model. It is designed to provide vibration suppression to selected modes of the structure at the accelerometer locations. The uncertainty model can be used as an adjustable design parameter which will enable a study of the trade-offs between performance and robust stability. The second approach is based on mu-synthesis. Although the structured singular value can be used to analyze the robustness of any type of uncertainty, there exist difficulties in synthesis if the uncertainty block contains both real and complex variations. Mu-synthesis techniques do not allow for real-parameter variations in the synthesis procedure. The use of a complex variation description enclosing the real variation is suggested.

Blackwood, G. H.↗