Search NASA⌕ Search

SEARCH · Search NASA

Results for “High Speed Data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Direct Observations of Surface Fluxes and Air‐Sea Exchange Coefficients in Low Winds Using a Small Uncrewed Aircraft System

In the marine boundary layer, the exchange of momentum, heat, and moisture occurs between the atmosphere and ocean. Since it is too dangerous for a crewed aircraft to fly close to the ocean surface to directly obtain these measurements, a sUAS (small Uncrewed Aircraft System) is one of the only viable options. On 24 March 2023 a Black Swift Technologies S0 sUAS was deployed from the NOAA P-3 on a calm clear day off the west coast of Florida. For 23 min at the end of the mission, the sUAS flew 8 straight line legs with an average length of 2.15 km, at roughly 10 m above the ocean surface, with wind speeds between 3.0 and 4.5 m s −1 . For the first time over the open ocean using a sUAS, the 4-Hz wind and thermodynamic data was used to calculate surface momentum flux, sensible heat flux, and latent flux using both direct covariance methods and the bulk aerodynamic formulas. Since all the flux quantities can be found using both direct and indirect methods, we are able to calculate the exchange coefficients of momentum flux (C D ), latent heat flux (C E ), and sensible heat flux (C H ) with results that are generally in good agreement with previous studies over the same wind speed range. This study demonstrates the ability of sUAS to measure air-sea interactions. Future intention is to use sUAS to obtain similar measurements in high wind events such as hurricanes which could better help understand hurricane intensification and improve model physics.

Deloach, Christopher J. [Embry-Riddle Aeronautical↗
DOE OSTI2026

Machine learning based prediction of airflow maldistribution in air-to-refrigerant heat exchangers

Flow maldistribution is a common challenge in heat exchanger (HX) design and particularly important for air-to-refrigerant geometries where capacity losses can approach 65%. This has a major impact on central air conditioning systems, as compact duct design motivates the use of A-type HXs which are known to be affected by airflow maldistribution. Because velocity profiles are difficult to predict, components are often oversized leading to increased material cost, system footprint, and refrigerant charge. Several studies detail airflow maldistribution for individual HXs and packages, but findings cannot always be extrapolated to new designs. In this work, a machine learning (ML) based flow profile prediction framework is developed and applied to two common package configurations: (i) A-type and (ii) U-type HXs, across a broad range of HX geometries and flow rates. Porous media CFD simulations are validated against independent data for both package types as well as comprehensive in house measurements for a finless geometry with shape optimized non-round tubes, which validates the framework for new heat transfer surfaces. The ML models are trained on the porous media CFD simulations, predicting volumetric flow rate (VFR) within 1.1% and 1.9% with maximum relative L 2 norm errors of 0.48 and 0.65, respectively, while also delivering 10 5 speed up factor compared to full porous media CFD. HX level simulations show an up to 9% reduction in heat transfer from flow maldistribution, with greater losses occurring at smaller half apex angles. This framework enables rapid and highly accurate prediction of airflow maldistribution induced capacity degradation.

42 ENGINEERING↗
DOE OSTI2024

Do Molecular Fingerprints Identify Diverse Active Drugs in Large-Scale Virtual Screening? (No)

Computational approaches for small-molecule drug discovery now regularly scale to the consideration of libraries containing billions of candidate small molecules. One promising approach to increased the speed of evaluating billion-molecule libraries is to develop succinct representations of each molecule that enable the rapid identification of molecules with similar properties. Molecular fingerprints are thought to provide a mechanism for producing such representations. Here, we explore the utility of commonly used fingerprints in the context of predicting similar molecular activity. We show that fingerprint similarity provides little discriminative power between active and inactive molecules for a target protein based on a known active—while they may sometimes provide some enrichment for active molecules in a drug screen, a screened data set will still be dominated by inactive molecules. We also demonstrate that high-similarity actives appear to share a scaffold with the query active, meaning that they could more easily be identified by structural enumeration. Furthermore, even when limited to only active molecules, fingerprint similarity values do not correlate with compound potency. In sum, these results highlight the need for a new wave of molecular representations that will improve the capacity to detect biologically active molecules based on their similarity to other such molecules.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2026

Numerical Modeling of a Two-Stage Ocean Current Turbine

The Equinox Ocean Turbines (EQOT) current energy converter has a unique design with power generation in two small-diameter turbines attached to the tips of a large-diameter passive rotor. This configuration offers some key advantages for capturing ocean currents. With no centrally placed generator, almost no reaction torque is required at the nacelle of the main large-diameter rotor, and the small-diameter tip turbine generators operate at a higher speed and lower torque. The physics that determine the performance and loads on the turbine are also unique. The interactions of the flow field between the two stages and the general architecture of the system cannot be captured with traditional mid-fidelity modeling tools. For design iterations and large sets of load cases, it is important to have mid-fidelity models that can capture the important phenomenon with enough accuracy to identify global trends. This work uses a limited set of high-fidelity computational fluid dynamics (CFD) simulations to help inform the selection of and construction of a custom mid-fidelity model. Mid-fidelity modeling approaches were verified by comparing key turbine performance quantities to those found with the CFD model. Hydrodynamic interactions of the two-stage rotor were identified through high-fidelity CFD modeling. This highlighted the impact of the main rotor tip vortex and wake on the secondary rotor apparent inflow. This results in a relative flow rotation and sharp deficit, that change the optimal secondary rotor rotation speed and adds unsteadiness to the blade loading respectively. Multiple mid-fidelity approaches were evaluated for their ability to capture these effects. A simple approximation of the combined-stage performance based on single-stage BEM provides a reasonable rough prediction, especially near the peak TSR values, with some larger discrepancy at higher TSRs. Predicting the combined-stage performance based on single-stage CFD data improves this prediction across the TSR range. Although the combined-stage modeling in OLAF was not successful in this stage of the project, it showed promise as a mid-fidelity method, assuming the parameters can be tuned to account for the significant differences in time and length scales between the main and secondary rotors. This may be addressed through code changes in future work. A significant finding from the OLAF work was the agreement between the vortex core radius values found independently via a parameter space search and via CFD. The technique of using single-stage secondary rotor BEM, with a custom inflow taken from single-stage main rotor CFD or OLAF, provides an efficient method to capture one-way coupled flow interactions. This method provided generally good predictions of the impact of the flow rotation on the secondary rotor but struggled to accurately predict the peaks of the unsteady load progression. Future work could include some superposition of a tuned main rotor trailing edge viscous wake into the custom inflow to better predict this interaction.

16 TIDAL AND WAVE POWER↗
DOE OSTI2024

Trends and meteorological drivers of extreme daily reservoir evaporation events in the western United States

Extreme daily evaporation from reservoir surfaces can lead to significant short-term water losses, affecting water quality, water supply, and reservoir operation strategies. Historical trends in daily reservoir evaporation events have eluded the scientific and operational communities, largely due to a lack of long-term, consistent data record. This study quantifies trends in extreme daily reservoir evaporation events at 165 major reservoirs located in the western U.S. Here, we use the place-based energy balance and aerodynamic Daily Lake Evaporation Model (DLEM) driven by multiple meteorological data products (RTMA, gridMET, Daymet) to estimate daily evaporation rates at these reservoirs from 1981 to 2022. The results—while are based on different meteorological forcing datasets—consistently indicate that the California, Lower Colorado, and Rio Grande hydrologic regions are more prone to higher daily evaporation extremes. Compared to the rest of western U.S, these three regions also experience a more pronounced increasing trend in the annual maximum daily evaporation rate, at about 0.3 mm day -1 decade -1 during 1981-2022. The results show that heat and dryness are the main drivers to the increasing trend of extreme evaporation, while extreme wind speed is the primary contributor to exceptionally high daily evaporation events across all regions. This phenomenon is particularly prominent in the arid Lower Colorado region, but less significant in the cold and humid Pacific Northwest region. We also find that the correlation between extreme wind speed and extreme evaporation degrades as the time scale increases from daily, to monthly and seasonal. Our findings have strong implications for the pattern and distribution of extreme evaporation events at the western U.S. reservoirs, and illustrate how various drivers influence extreme evaporation across different time scales.

13 HYDRO ENERGY↗
DOE OSTI2024

Automation and optimization of stopping and range of ions in matter simulation runtime

Prior to every ion implantation experiment a simulation of the ion range and other relevant parameters is performed using Monte-Carlo based codes. Although increasing computing power has improved the speed of these calculations, the demands on Monte-Carlo codes are also increasing, requiring evaluation of the optimal number of simulations while ensuring accuracy within threshold bounds. We evaluate the “Stopping and Range of Ions in Matter” (SRIM) code due to its widespread usage. We show how dividing simulations into multiple parallel simulations with different random seeds can lead to calculation speedup and find lower bounds for the required number of ion traces simulated based on an exemplar system of a Ga focused ion beam and a high energy C beam as used in high linear energy transfer testing. Here our results indicate simulations can yield results within the underlying data accuracy of SRIM at 10X and 100X shorter simulation time than the SRIM default values.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2025

Future Wind Energy Resources and Cost Uncertainties Across the United States

This dataset contains results estimating projections of change of annual capacity factors and levelized cost of energy for several turbine technologies in the 2024 Annual Technology Baseline (ATB). Projections of change are based on downscaled earth system model (ESM) data from Sup3rCC. There has been evidence of reductions in average wind speeds over land in North America since the 1980s, and several models project that average wind speeds will continue to decrease. Concurrently, the cost of wind energy systems in the United States has been decreasing since around 2010, a trend also projected to continue. There is considerable uncertainty in these future projections, with quantitative estimates of future wind resource and system costs varying widely. To study this, we run land-based wind energy models with a range of possible future system costs, turbine designs, and meteorological inputs from multiple downscaled earth system models over the contiguous United States to estimate critical system performance metrics such as annual energy production (AEP) and levelized cost of energy. Where multiple earth system models agree, changes in mean AEP from the time period 2000-2019 to 2040-2059 can be as high as +10% in South Texas or as low as -20% in Iowa. Several additional states in the Midwest that currently have considerable wind generation capacity show the possibility of substantial decreases in AEP by mid-century. Larger turbines and moderate reductions in system costs can offset even the largest projected decreases in wind resource, but much uncertainty remains in the extent to which wind resources will actually change into the future and to what extent wind energy systems can drive down future costs. An analysis of variance shows, in several states in the Midwest, the uncertainty in future wind resource can be almost as important for future changes in the cost of wind energy as the uncertainty in future system costs.

17 WIND ENERGY↗
DOE OSTI2024

Data Science Shows that Entropy Correlates with Accelerated Zeolite Crystallization in Monte Carlo Simulations

We have performed a data science study of Monte Carlo simulation trajectories to understand factors that can accelerate formation of zeolite nanoporous crystals, a process that can take days or even weeks. In previous work, Monte Carlo simulations predicted and experiments confirmed that using a secondary organic structure-directing agent (OSDA) accelerates crystallization of all-silica LTA zeolite, with experiments finding a three-fold speedup [PCCP 24, 142-148 (2022)]. However, it remains unclear what physical factors cause the speed-up. Here, we apply data science to analyze the simulation trajectories to discover what drives accelerated zeolite crystallization in Monte Carlo going from a one-OSDA synthesis (1OSDA) to a two-OSDA version (2OSDA). We encoded simulation snapshots using the Smooth Overlap of Atomic Positions approach, which represents all 2- and 3-body correlations within a given cutoff distance. Principal component analyses failed to discriminate datasets of structures from 1OSDA and 2OSDA simulations, while the Support Vector Machine (SVM) approach succeeded at classifying such structures with an area-under-curve (AUC) score of 0.99 (where AUC = 1 is a perfect classification) with all 3-body correlations, and as high as 0.94 with only 2-body correlations. SVM decision functions reveal relatively broad / narrow histograms for 1OSDA / 2OSDA datasets, suggesting that the two simulations differ strongly in information heterogeneity. Informed by these results, we performed pair (2-body) entropy calculations during crystallization, resulting in entropy differences that semi-quantitatively account for the speedup observed in the previous Monte Carlo simulations. We conclude that altering synthesis conditions in ways that substantially changes the entropy of labile silica networks may accelerate zeolite crystallization, and we discuss possible approaches for achieving such acceleration.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2024

Verification and Validation of Spectral Element Code for Supercritical CO2 Flow in Vertical Heated Tubes

The investigation of heat transfer in supercritical CO2 (sCO2) has garnered considerable attention in recent decades, given sCO2's potential as a promising working fluid for advanced power conversion cycles. Despite previous research efforts, there are still gaps in our understanding of sCO2 heat transfer, particularly in conditions associated with heat transfer deterioration. To delve into sCO2 heat transfer more comprehensively, we propose employing the high-fidelity computational fluid dynamics code NekRS to simulate sCO2 flow using the large eddy simulation technique. Through graphics processing unit acceleration, NekRS achieves a higher computational speed than traditional CPU-based systems. However, before using NekRS in practical applications involving sCO2, it is imperative to perform verification and validation. Here, this paper presents our efforts to verify and validate the NekRS code's capability for simulating sCO2 using heated vertical tubes, where heat transfer deterioration usually happens. To accommodate the unique properties of sCO2, we have modified the NekRS code by integrating third-party property modules, such as REFPROP and PROPATH. Our simulations are compared with experimental and numerical data from the literature, instilling confidence in leveraging NekRS for future engineering applications. Our simulations also reveal that the accuracy of the property module significantly impacts the results, with REFPROP outperforming PROPATH for sCO2 properties. Additionally, we observed that, depending on the flow direction, buoyancy can either enhance or suppress turbulence in sCO2 flow. In upward flow, under certain conditions, the suppressed turbulence leads to heat transfer deterioration, resulting in elevated wall temperatures.

NekRS↗
DOE OSTI2025

A High-Order Discontinuous Galerkin Spectral Element Method for Compressible Reacting Flows

High-order methods have recently been shown to be an effective tool for high-fidelity flow computations like direct numerical simulations and large eddy simulations due to their strong balance between accuracy and computational cost. In this work, a high-order discontinuous Galerkin spectral element method (DGSEM) is developed to solve the chemically reactive Euler equations encountered in high-speed combustion. To handle the disparate length and time scales associated with these equations, we develop a novel method which combines the spectral accuracy of the SEM with the flexibility of DG approach. Thus, the framework is well suited to capture turbulence in smooth regions of the flow, while maintaining numerical stability in the presence of shocks. The numerical method is implemented within the spectral element solver Nek5000. Validation cases are conducted for both non-reactive and reactive discontinuous flows to demonstrate the solver capability. In particular, canonical one-dimensional and two-dimensional detonation simulations are performed and the high-order numerical results are validated against available literature data.

computational fluid dynamics (CFD)↗
DOE OSTI2024

A robust approach to Gaussian process implementation

Abstract. Gaussian process (GP) regression is a flexible modeling technique used to predict outputs and to capture uncertainty in the predictions. However, the GP regression process becomes computationally intensive when the training spatial dataset has a large number of observations. To address this challenge, we introduce a scalable GP algorithm, termed MuyGPs, which incorporates nearest-neighbor and leave-one-out cross-validation during training. This approach enables the evaluation of large spatial datasets with state-of-the-art accuracy and speed in certain spatial problems. Despite these advantages, conventional quadratic loss functions used in the MuyGPs optimization, such as root mean squared error (RMSE), are highly influenced by outliers. We explore the behavior of MuyGPs in cases involving outlying observations and, subsequently, develop a robust approach to handle and mitigate their impact. Specifically, we introduce a novel leave-one-out loss function based on the pseudo-Huber function (LOOPH) that effectively accounts for outliers in large spatial datasets within the MuyGPs framework. Our simulation study shows that the LOOPH loss method maintains accuracy despite outlying observations, establishing MuyGPs as a powerful tool for mitigating unusual observation impacts in the large data regime. In the analysis of US ozone data, MuyGPs provides accurate predictions and uncertainty quantification, demonstrating its utility in managing data anomalies. Through these efforts, we advance the understanding of GP regression in spatial contexts.

Mukangango, Juliette↗
DOE OSTI2025

Data-driven organic solubility prediction at the limit of aleatoric uncertainty

Abstract Small molecule solubility is a critically important property which affects the efficiency, environmental impact, and phase behavior of synthetic processes. Experimental determination of solubility is a time- and resource-intensive process and existing methods for in silico estimation of solubility are limited by their generality, speed, and accuracy. This work presents two models derived from the FASTPROP and CHEMPROP architectures and trained on BigSolDB which are capable of predicting solubility at arbitrary temperatures for a wide range of small molecules in organic solvent. Both extrapolate to unseen solutes 2–3 times more accurately than the current state-of-the-art model and we demonstrate that they are approaching the aleatoric limit (0.5–1$$\log S$$ log S ) of available test data, suggesting that further improvements in prediction accuracy require more accurate datasets. The FASTPROP-derived model (called FASTSOLV) and the CHEMPROP-based model are open source, freely accessible via a Python package and web interface, highly reproducible, and up to 2 orders of magnitude faster than current alternatives.

Science & Technology - Other Topics↗
DOE OSTI2026

Oil Filled Flow Shield Performance Evaluation

When hydrophones are used to monitor underwater sound in areas with currents, like rivers or tidal channels, flow noise caused by turbulent flow past a hydrophone can mask low frequency acoustic signals of interest. Flow shields can reduce the impacts of flow noise on hydrophone data. A prior study conducted by PNNL compared three flow shield designs and determined that an oil-filled urethane shield performed better than other designs and was likely sufficiently robust for long-duration marine deployments. However, that study did not assess the high frequency performance of the oil-filled flow shield or conduct long-duration field testing. Further, the prototype flow shield was difficult to assemble. This report details the results of design refinement and testing to address these gaps. Design refinements resulted in a straightforward and repeatable assembly method. Field testing indicated that the flow shields reduce flow noise by over 20 dB below 50 Hz at flow speeds greater than 0.5 m/s and are proven to survive deployments more than 6 months long. Calibration of the same hydrophone with and without a flow shield installed indicated that the shields attenuate propagating sound by no more than 2 dB at frequencies below 30 kHz.

42 ENGINEERING↗
DOE OSTI2024

Automated Lane Centering: An Off-the-Shelf Computer Vision Product vs. Infrastructure-Based Chip-Enabled Raised Pavement Markers

Safe autonomous vehicle (AV) operations depend on an accurate perception of the driving environment, which necessitates the use of a variety of sensors. Computational algorithms must then process all of this sensor data, which typically results in a high on-vehicle computational load. For example, existing lane markings are designed for human drivers, can fade over time, and can be contradictory in construction zones, which require specialized sensing and computational processing in an AV. But, this standard process can be avoided if the lane information is simply transmitted directly to the AV. High definition maps and road side units (RSUs) can be used for direct data transmission to the AV, but can be prohibitively expensive to establish and maintain. Additionally, to ensure robust and safe AV operations, more redundancy is beneficial. A cost-effective and passive solution is essential to address this need effectively. In this research, we propose a new infrastructure information source (IIS), chip-enabled raised pavement markers (CERPMs), which provide environmental data to the AV while also decreasing the AV compute load and the associated increase in vehicle energy use. CERPMs are installed in place of traditional ubiquitous raised pavement markers along road lane lines to transmit geospatial information along with the speed limit using long range wide area network (LoRaWAN) protocol directly to nearby vehicles. This information is then compared to the Mobileye commercial off-the-shelf traditional system that uses computer vision processing of lane markings. Our perception subsystem processes the raw data from both CEPRMs and Mobileye to generate a viable path required for a lane centering (LC) application. To evaluate the detection performance of both systems, we consider three test routes with varying conditions. Our results show that the Mobileye system failed to detect lane markings when the road curvature exceeded ±0.016 m -1 . For the steep curvature test scenario, it could only detect lane markings on both sides of the road for just 6.7% of the given test route. On the other hand, the CERPMs transmit the programmed geospatial information to the perception subsystem on the vehicle to generate a reference trajectory required for vehicle control. The CERPMs successfully generated the reference trajectory for vehicle control in all test scenarios. Moreover, the CERPMs can be detected up to 340 m from the vehicle’s position. Our overall conclusion is that CERPM technology is viable and that it has the potential to address the operational robustness and energy efficiency concerns plaguing the current generation of AVs.

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2024

Domain-decomposition nonlinear manifold reduced order model

This software combines nonlinear-manifold reduced order models (NM-ROMs) with domain decomposition (DD) techniques. NM-ROMs, which utilize a shallow, sparse autoencoder trained with full order model (FOM) snapshot data, approximate the FOM state on a nonlinear manifold. These models offer advantages over linear-subspace ROMs (LS-ROMs) particularly in scenarios with slowly decaying Kolmogorov n-width. However, the training of NM-ROMs involves a number of parameters that scale with the size of the FOM, and storing high-dimensional FOM snapshots can significantly increase the cost of ROM training for extreme-scale problems. To mitigate these costs, the software employs DD to partition the FOM into smaller subdomains, computes NM-ROMs for each, and then integrates these to form a global NM-ROM. This strategy offers multiple benefits: it enables parallel training of subdomain NM-ROMs, reduces the number of parameters needed, decreases the dimensional requirements of subdomain FOM training data, and allows for customization to the unique characteristics of each FOM subdomain. The use of a shallow, sparse autoencoder architecture in each subdomain NM-ROM facilitates the application of hyper-reduction (HR), simplifying the nonlinear complexities and enhancing computational speed. This software marks the inaugural application of NM-ROM combined with HR to a DD problem. It features an algebraic DD reformulation of the FOM, training of NM-ROMs with HR for each subdomain, and employs a sequential quadratic programming (SQP) solver for the evaluation of the coupled global NMROM. The effectiveness of the DD NM-ROM with HR is numerically demonstrated on the 2D steady-state Burgers' equation, showing an order of magnitude improvement in accuracy over the DD LS-ROM with HR.

Diaz, AlejandroN↗
DOE OSTI2025

Particle hit clustering and identification using point set transformers in liquid argon time projection chambers

Liquid argon time projection chambers are often used in neutrino physics and dark-matter searches because of their high spatial resolution. The images generated by these detectors are extremely sparse, as the energy values detected by most of the detector are equal to 0, meaning that despite their high resolution, most of the detector is unused in a particular interaction. Instead of representing all of the empty detections, the interaction is usually stored as a sparse matrix, a list of detection locations paired with their energy values. Traditional machine learning methods that have been applied to particle reconstruction such as convolutional neural networks (CNNs), however, cannot operate over data stored in this way and therefore must have the matrix fully instantiated as a dense matrix. Operating on dense matrices requires a lot of memory and computation time, in contrast to directly operating on the sparse matrix. We propose a machine learning model using a point set neural network that operates over a sparse matrix, greatly improving both processing speed and accuracy over methods that instantiate the dense matrix, as well as over other methods that operate over sparse matrices. Compared to competing state-of-the-art methods, our method improves classification performance by 14%, segmentation performance by more than 22%, while taking 80% less time and using 66% less memory. Compared to state-of-the-art CNN methods, our method improves classification performance by more than 86%, segmentation performance by more than 71%, while reducing runtime by 91% and reducing memory usage by 61%.

calibration and fitting methods↗
DOE OSTI2025

A 30-yr high-resolution weather research and forecasting model downscaling data over California and Nevada

This dataset presents a 30-year high resolution meteorological dataset obtained using the WRF model (Advanced version Research WRF version 4.4). We used WRF and European Centre for Medium-Range Weather Forecasts Reanalysis v5 as initial and boundary conditions to generate gridded meteorological variables. A large number of surface weather stations was used for model validation. A multi-physics analysis was first developed to identify a good physics suite extended from 6 November 00 UTC to 10 November 23 UTC, 2018, which included the Camp Fire in northern California. Based on the best physics suite, the downscaling dataset extends from 1 December to 28 February, 1990–2021 and the horizontal domain has 1.5 km grid spacing covering the entire states of California and Nevada in the United States. Comparisons between hourly surface observations and WRF simulations of air temperature, relative humidity and wind speeds show mean absolute errors on the order of (1.6-2.0 C), (10 %) and 1.2–1.5 m s -1 , respectively.

54 ENVIRONMENTAL SCIENCES↗