Search NASA⌕ Search

SEARCH · Search NASA

Results for “LOGIC”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16

Batch fabrication process development for ferrite logic conductors

A process for fabricating ultrareliable magnetic ferrite logic circuits is described in which the conductors are formed by a combination of two batch type processes - photolithography and electroplating - and a mechanized writing process for completing conductors in the third dimension. Up to 4 turns, through an aperture 1 mm in diameter, are formed by the described process. The number of joints in the conductors is reduced by use of this process to only those which are required for input, output and power connections of a logic block. To demonstrate feasibility, 8-stage magnetic ring counter circuits have been fabricated.

Heckler, C. H., Jr.↗

Versatile logic system for use in nuclear experiments on scientific satellites.

An improved fast low-power-drain logic system has been developed for use in nuclear experiments on scientific satellites. The basic unit of the system is an AND-NAND gate which has a response in the 10-nsec range, a power drain of 2.0 mw and operates over the temperature range of -40 to +80 C. In addition to providing the AND-NAND logic functions, one or more of the basic units may be connected to yield a monostable pulse generator, a pulse generator proceeding an output pulse at the leading edge of the input pulse, a delay, a threshold detector, and a bistable circuit. The system requires relatively simple circuitry for interfacing at its outputs and inputs.

Cancro, C. A.↗

Control logic for a 30 cm diameter ion thruster

The various missions to be performed by the 30-cm diameter mercury bombardment thruster engine are discussed. The operating constraints imposed by the thermal environment, allowable time to reach steady state operation, and the number of start-ups required are examined. The variety of requirements is further analyzed for the impact on the basic control logic for the engine. The control logic is divided into the start-up, run, and shutdown modes of operation. The start-up mode is reported.

Bechtel, R. T.↗

Guidance logic for spiral approaches

A spiral approach concept is proposed as a standard procedure for independent, commercial VTOL operations conducted in close proximity to CTOL operations. A guidance logic is developed for this VTOL application, although the results may be applicable to curved approaches by STOL or CTOL aircraft as well. The guidance concept attempts to maintain constant airspeed along a fixed radius nominal spiral. The presence of wind requires a continuous variation in bank angle and heading rate to remain on the desired path. Linear perturbation analysis is used to select satisfactory feedback gains for commanded bank angle, longitudinal acceleration and vertical speed. A wind estimator detects differences between the predicted and observed wind and uses the result to modify the nominal control. For 4-D guidance the nominal time must be computed as a function of turn angle, which requires the solution of an elliptic integral. Time-varying longitudinal accelerations are necessary for 4-D guidance when the observed wind differs from the predicted wind, or when wind shear is present. The logic and the linear feedback gains have been tested in a nonlinear simulation. Results have generally verified the performance predicted by linear analysis.

Hollister, W. M.↗

Development of an optical parallel logic device and a half-adder circuit for digital optical processing

The paper describes the fabrication and operation of an optical parallel logic (OPAL) device which performs Boolean algebraic operations on binary images. Several logic operations on two input binary images were demonstrated using an 8 x 8 device with a CdS photoconductor and a twisted nematic liquid crystal. Two such OPAL devices can be interconnected to form a half-adder circuit which is one of the essential components of a CPU in a digital signal processor.

Athale, R. A.↗

LSI logic for phase-control rectifiers

Signals for controlling phase-controlled rectifier circuit are generated by combinatorial logic than can be implemented in large-scale integration (LSI). LSI circuit saves space, weight, and assembly time compared to previous controls that employ one-shot multivibrators, latches, and capacitors. LSI logic functions by sensing three phases of ac power source and by comparing actual currents with intended currents.

Dolland, C.↗

A computer program for the generation of logic networks from task chart data

The Network Generation Program (NETGEN), which creates logic networks from task chart data is presented. NETGEN is written in CDC FORTRAN IV (Extended) and runs in a batch mode on the CDC 6000 and CYBER 170 series computers. Data is input via a two-card format and contains information regarding the specific tasks in a project. From this data, NETGEN constructs a logic network of related activities with each activity having unique predecessor and successor nodes, activity duration, descriptions, etc. NETGEN then prepares this data on two files that can be used in the Project Planning Analysis and Reporting System Batch Network Scheduling program and the EZPERT graphics program.

Herbert, H. E.↗

The spatial and logical organization of devices in an advanced industrial robot system

This paper describes the geometrical and device organization of a robot system which is based in part upon transformations of Cartesian frames and exchangeable device tree structures. It discusses coordinate frame transformations, geometrical device representation and solution degeneracy along with the data structures which support the exchangeable logical-physical device assignments. The system, which has been implemented in a minicomputer, supports vision, force, and other sensors. It allows tasks to be instantiated with logically equivalent devices and it allows tasks to be defined relative to appropriate frames. Since these frames are, in turn, defined relative other frames this organization provides a significant simplification in task specification and a high degree of system modularity.

Ruoff, C. F.↗

Logic-controlled occlusive cuff system

An occlusive cuff system comprises a pressure cuff and a source of regulated compressed gas feeding the cuff through an electrically operated fill valve. An electrically operated vent valve vents the cuff to the ambient pressure. The fill valve is normally closed and the vent valve is normally open. In response to an external start signal, a logic network opens the fill valve and closes the vent valve, thereby starting the pressurization cycle and a timer. A pressure transducer continuously monitors the pressure in the cuff. When the transducer's output equals a selected reference voltage, a comparator causes the logic network to close the fill valve. The timer, after a selected time delay, opens the vent valve to the ambient pressure, thereby ending the pressurization cycle.

Baker, J. T.↗

RS-232 communications analyzer module for HP-1602A logic analyzer

The design and construction of a simple ASCII analyzer is described. It was built to interface directly to a Hewlett-Packard 1602A logic state analyzer but the circuitry could easily be configured to operate with any logic analyzer. The design of the ASCII analyzer allows the use of all the trace and delay functions for the HF-1602A. The ASCII analyzer circuit utilizes two universal Asynchronous Receiver/Transmitters (UAR/Ts) to simultaneously examine both the transmit and receive serial data lines. Baud rates from 300 to 9600 bits per second are selectable with the externally mounted DIP switch. The unit requires no external power supply connection and all of the integrated circuits are CMOS for low power consumption.

Yost, S. R.↗

Logic Simulator Program

The source code for the SPICE 2 program was deblocked in order to isolate and compile the subroutine in an effort to provide a software simulation of discrete and combinatorial electronic components. Incompatibilities between the UNIVAC 1180 FORTRAN and the Sigma V CP-V FORTRAN 4 were resolved. The SPICE 2 model is to be used to determine gate and fan-out delays, logic state conditions, and signal race conditions for transistor array elements and circuit logic to be patterned in the (SPI) 7101 CMOS silicon gate semicustom array. The simulator is to be operable from the CP-V time sharing terminals.

Agarwal, R. K.↗

Orbital Maneuvering Vehicle Simulation System On-Board Processing Logic

The control logic for an Orbital Maneuvering Vehicle (OMV) Simulation system is developed. In order that better control over the vehicle can be exercised, several modifications to the vehicle are suggested. The need of better position feedback leads to the development of an alternative simpler but more reliable navigation system which is also discussed. The control logic is presented in pseudocode form, and can be implemented in FORTRAN and/or MACRO II.

Teoh, W.↗

STP: A Mechanized Logic for Specification and Verification

A logic and proof theory that was mechanized and successfully applied to prove nontrivial properties of a fully distributed fault tolerant system is described. The system is close to achieving the critical balance in man machine interaction necesary for successful application by users other than the system developers. Motivation for the form of man machine interaction embodied by STP is discussed. A formal description of the logic and the proof theory is contained, and the description illustrated with an example. The use of STP in a large scale effort to prove nontrivial properties on SIFT, a distributed Software Implemented Fault Tolerant operating system for aircraft flight control is discussed. Finally, directions for further work are described.

Shostak, R. E.↗

Automatic Construction of Verification Generators from Hoare Logics

A method for mechanically constructing verification condition generators from a useful class of Hoare logics is defined. Any verification condition generator constructed is shown to be sound and deduction complete with respect to the associated Hoare logic. The method was implemented.

Moriconi, M.↗

Using spatial logic in classification of Landsat TM data

A strategy for spatial/spectral classification of Landsat TM data is presented. The strategy is founded upon 'spatial logic', a logic that seeks to emulate important aspects of visual image interpretation. The carefully structured classification process begins with spectral stratification of the data into water, vegetated and non-vegetated pixels. A region growing algorithm is then used to define 'fields' of similar land cover composition. Fields are characterized by cover composition, size and neighborhood characteristics. A supervised iterative contextual classification algorithm is developed to assign final land use/land cover labels. Maps are generalized using a spatial post-processing technique. Positive, though preliminary, results are presented.

Merchant, J. W.↗

Issues in rule identification and logical induction

The relationship between language and empirical fitting of data is discussed. The production system is presented as an appropriate description of human behavior in Man-Machine systems. Issues arising in the identification of rules from data are examined. Rules identified through logical generalization are shown to be equivocal. Difficulties arising from the use of logic-based procedures with human performance data containing errors are explored. Problems relating to rule sets which are not disjoint are discussed and a solution presented. Significant testing issues are raised for rule identification and a procedure based on controlling contrivedness is presented. A synthesis of data and knowledge-based approaches is suggested as a remedy to many of the difficulties discussed.

Lewis, C. M.↗

Heat exchanger expert system logic

The reduction is described of the operation and fault diagnostics of a Deep Space Network heat exchanger to a rule base by the application of propositional calculus to a set of logic statements. The value of this approach lies in the ease of converting the logic and subsequently implementing it on a computer as an expert system. The rule base was written in Process Intelligent Control software.

Cormier, R.↗

The CSM testbed matrix processors internal logic and dataflow descriptions

This report constitutes the final report for subtask 1 of Task 5 of NASA Contract NAS1-18444, Computational Structural Mechanics (CSM) Research. This report contains a detailed description of the coded workings of selected CSM Testbed matrix processors (i.e., TOPO, K, INV, SSOL) and of the arithmetic utility processor AUS. These processors and the current sparse matrix data structures are studied and documented. Items examined include: details of the data structures, interdependence of data structures, data-blocking logic in the data structures, processor data flow and architecture, and processor algorithmic logic flow.

Regelbrugge, Marc E.↗