Search NASA⌕ Search

SEARCH · Search NASA

Results for “Local Method”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16
All sourcesNASA NTRSDOE OSTI
NASA NTRS2019

Hazardous Product Detection and Environmental Clean-up Removal in Spacecraft Vehicles from Fire Induced Li-Ion Fires

A fire on-board the International Space Station (ISS) resulting from a commercial Surface Pro tablet Lithium-Ion (Li-ion) battery can be detrimental to the spacercraft and the astronauts. The Spacecraft Fire Safety Demonstration (Saffire) program is focused on identifying and quantifying the risks that potentially arise inside a space vehicle by conducting large fire experiments inside the Cygnus cargo vehicle upon re-entry to Earth. The potential candidate that will be flown on the ISS is a 4- cell Li-ion battery pack Surface Pro tablet (42 Wh). The tablets were tested at the White Sands Test Facility (WSTF) using a localized heating method to emulate the failing mechanism that leads the unit into thermal runaway. Measurements inside the test chamber were performed on aerosol mass concentrations and for specific toxic products (i.e. from CO, HCN, HCl and CO2). These toxic products depend on the size of the fire and energy content of the tablet. Comparisons will be made with the Dell XPS (97 Wh). The concentrations are then used to extrapolate to laptop fires on a vehicle at the approximate volumetric size of the Orion spacecraft. The presentation provides an analysis on the detection capability and the response time to trigger fire alarms aboard a vehicle by using the mass concentration levels. These results will consider the rate at which the life support system is able to filter the atmosphere in order to provide a hazardous free environment.

Padilla, Rosa E.↗
NASA NTRS2020

The European Russia Drought Atlas (1400-2016 CE)

We present the European Russia Drought Atlas (ERDA) that covers the East European Plain to the Ural Mountains from 1400–2016 CE. Like the Old World Drought Atlas (OWDA) for the Euro-Mediterranean region, the ERDA is a one-half degree gridded reconstruction of summer Palmer Drought Severity Indices estimated from a network of annual tree-ring chronologies. Ensemble point-by-point regression is used to generate the ERDA with the identical protocols used for developing the OWDA. Split calibration/validation tests of the ERDA indicate that it has significant skill over most of its domain and is much more skillful than the OWDA where they overlap in the western part of ERDA domain. Comparisons to historical droughts over European Russia additionally support the ERDA’s overall validity. The ERDA has been spatially smoothed and infilled using a local regression method to yield a spatially complete drought atlas back to 1400 CE. EOF analysis indicates that there are three principal modes of hydroclimatic variability in the ERDA. After Varimax rotation, these modes correlate significantly with independent climate data sets extending back to the late nineteenth century in a physically interpretable way and relate to atmospheric circulation dynamics of droughts and heatwaves over European Russia based on more recent instrumental data.

Cook, Edward R.↗
NASA NTRS2020

1- by 1-Foot Supersonic Wind Tunnel Sidewall Flowfield Compression Plate Study

A method for locally increasing the dynamic pressure in the test section of a supersonic wind tunnel is investigated from a theoretical, computational and experimental perspective, culminating in a reduced-scale, proof-of-concept test at Mach 3.44. Symmetric, variable-angle compression plates along the test section sidewalls generate oblique shockwaves to elevate the test section dynamic pressure (q). The experimental effort utilizes boundary-layer pitot rakes to sample the incoming flow near the floor, pitot and static rakes to measure the high-q core flow and numerous surface taps to map out the static pressure distribution along the floor, ceiling and sidewalls. A reliable and robust starting procedure is developed to establish supersonic flow in the test section and behind the compression plates. A characterization of the incoming floor boundary layer reveals previously documented features (such as a bulge toward the centerline) and an unexpected (and as-yet-unexplained) thickening of the boundary layer with increasing Reynolds number around total pressures of 40–60 psia. The high-q core flow is characterized for eight compression plate angles (4.0–8.0°), eight tunnel total pressures (20–139 psia) and three axial stations (24.95–27.35 inches). The peak dynamic pressure rise exceeds expectations. At conditions relevant to full-scale testing (6.0° and 139 psia), the dynamic pressure increases by a factor of 1.73, the Mach number becomes 2.85 and the total pressure drops imperceptibly. Basic distortion metrics show transverse non-uniformity of less than 5 %. Limited spatial resolution in the static rake measurements warrants additional, higher fidelity testing or computational analysis. Surface-mounted, fast-response instrumentation suggests minimal unsteadiness in the flow, less than a few percent of the mean (comparable to the sensor accuracy).

Wind tunnel testing, test techniques/methods, dyna↗
DOE OSTI2020

Resolution system that provides access to remote data locally

A system and method that provides access to remote data locally by identifying and downloading linked content from a plurality of remote sources through a communication network; decomposing the downloaded content into local content elements by intercepting links between the content elements and mapping the intercepted links to redirected links that locate the same download content in a local cache or a local server proxy; identifying remote devices requesting access to the local cache or the local server proxy and the device's functionality through a tracking code stored on the remote devices and a probabilistic tracking; and providing access to the local cache or the local server proxy in response to authorizations associated with the identified devices and a user.

97 MATHEMATICS AND COMPUTING↗
NASA NTRS2018

Method and System for Multi-Path Active Defect Detection, Localization and Characterization with Ultrasonic Guided Waves

A method and system of detecting, localizing, and characterizing a defect at one or more spatial points of interest on a structure. The method may include collecting first data in a first state using one or more transducers on the structure, collecting second data in a second state subsequent to the first state, computing a scattered impulse response based on the collected first data and the collected second data, comparing the scattered impulse response with an estimated scattered impulse response corresponding to the case when damage is present at one or more spatial points of interest on the structure, and combining the generated comparison results to detect, localize, and characterize a defect at the one or more spatial points of interest on the structure.

Hall, James Stroman↗
DOE OSTI2025

Stage-local partitioned two-step runge-kutta methods for large systems of ordinary differential equations

We introduce stage-local partitioned two-step Runge-Kutta methods are an extension of standard two-step Runge-Kutta methods, which are an alternative to the standard additive two-step Runge-Kutta methods currently existing in the literature. Furthermore, these new schemes are designed with an eye towards truly N-partitioned systems and leverage local stage approximations to make several computationally interesting approximations viable. Specifically, the focus on local stage approximations makes possible the construction of truly asynchronous schemes, in the parallel sense, possible. In addition, we show that an implicit-explicit approach to these schemes can lead to methods that require the inversion of only local nonlinear systems.

Applied Dynamical Systems↗
NASA NTRS2021

Patched Local Lunar Gravity Solutions using GRAIL Data

We present a method to determine local gravity fields for the Moon using Gravity Recovery and Interior Laboratory (GRAIL) data. We express gravity as gridded gravity anomalies on a sphere, and we estimate adjustments to a background global start model expressed in spherical harmonics. We processed GRAIL Ka-band range-rate data with a short-arc approach, using only data over the area of interest. We determine our gravity solutions using neighbor smoothing constraints. We divided the entire Moon into twelve regions and two polar caps, with a resolution of 0.15˚ x 0.15˚ (which is equivalent to degree and order 1199 in spherical harmonics), and determined the optimal smoothing parameter for each area by comparing localized correlations between gravity and topography for each solution set. Our selected areas share nodes with surrounding areas and they are overlapping. To mitigate boundary effects, we patch the solutions together by symmetrically omitting the boundary parts of overlapping solutions. Our new solution has been iterated, and it has improved correlations with topography when compared to a fully iterated global model. Our method requires fewer resources, and can easily handle regionally varying resolution or constraints. The smooth model describes small-scale features clearly, and can be used in local studies of the structure of the lunar crust.

Sander Goossens↗
NASA NTRS2015

Method and System for Gamma-Ray Localization Induced Spacecraft Navigation Using Celestial Gamma-Ray Sources

A method and system for spacecraft navigation using distant celestial gamma-ray bursts which offer detectable, bright, high-energy events that provide well-defined characteristics conducive to accurate time-alignment among spatially separated spacecraft. Utilizing assemblages of photons from distant gamma-ray bursts, relative range between two spacecraft can be accurately computed along the direction to each burst's source based upon the difference in arrival time of the burst emission at each spacecraft's location. Correlation methods used to time-align the high-energy burst profiles are provided. The spacecraft navigation may be carried out autonomously or in a central control mode of operation.

Sheikh, Suneel I.↗
DOE OSTI2024

Long‐range quantum energy teleportation and distribution on a hyperbolic quantum network

Abstract Teleporting energy to remote locations is new challenge for quantum information science and technology. Developing a method for transferring local energy in laboratory systems to remote locations will enable non‐trivial energy flows in quantum networks. From the perspective of quantum information engineering, we propose a method for distributing local energy to a large number of remote nodes using hyperbolic geometry. Hyperbolic networks are suitable for energy allocation in large quantum networks since the number of nodes grows exponentially. To realise long‐range quantum energy teleportation (QET), we propose a hybrid method of quantum state telepotation and QET. By transmitting local quantum information through quantum teleportation and performing conditional operations on that information, QET can theoretically be realized independent of geographical distance. The method we present will provide new insights into new applications of future large‐scale quantum networks and potential applications of quantum physics to information engineering.

Ikeda, Kazuki↗
DOE OSTI2022

Effective properties of semitransparent radiative cooling materials with spectrally variable properties

Radiative cooling is a promising solid-state, non-vapor-compression technology for passive refrigeration and air conditioning. Although this phenomenon occurs naturally, achieving a significant amount of cooling to make it a technically and economically viable technology requires highly engineered, spectrally selective radiative surfaces. These characteristics make radiative cooling difficult to estimate, particularly when it is integrated with other systems such as photovoltaic panels or building envelopes. The complexity further increases when the substrate also participates in the radiative cooling (along with the radiative coating). Energy estimation is becoming increasingly critical because of the recent focus on the semitransparent radiative coatings that transmit a variety of colors to enhance the aesthetic appeal of the system. In this work, we propose an iterative method to calculate the effective radiative properties, which provides the same net radiative cooling that would be observed using the spectral properties at both the coating and substrate surfaces. Compared to traditional methods that rely on either computationally expensive full spectral analysis or methods for averaging each radiative surface parameter locally, our proposed method focuses on calculating effective properties that provide the same the net cooling effect as a full spectral analysis by accounting the emissivity, absorptivity, and transmissivity collectively, thereby providing an overall estimation error of less than 0.2%. We believe that this study will be beneficial to the engineering communities that employ complex simulation codes and require lumped solar and thermal radiation related parameters.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
NASA NTRS1992

A theoretical and experimental study of the noise behavior of subharmonically injection locked local oscillators

A method for the noise characterization of optically controlled subharmonically injection-locked oscillators is presented. Based on a nonlinear model of synchronized oscillators, this method is used to formulate a general expression for phase noise calculation, so that FM noise degradation of a subharmonically synchronized LO at large-signal levels can be predicted easily and accurately. Experimental results of FM noise measurement of an oscillator confirmed the accuracy of the analysis.

Zhang, Xiangdong↗
DOE OSTI2021

Strobed imaging as a method for the determination and diagnosis of local seeing

ABSTRACT The image quality budget of many telescopes can have substantial contributions from local seeing, both ‘mirror’ and ‘dome’, which arise from turbulence and temperature variations that are difficult to quantify, measure directly, and ameliorate. We describe a method to determine the ‘local’ seeing degradation due to wavefront perturbations within the final few metres of the optical path from celestial sources to the focal plane of a ground-based telescope, using the primary instrument and along the same path taken by light from celestial sources. The concept involves placing strobed emitters along the light path to produce images on the main focal plane that ‘freeze’ different realizations of index perturbations. This method has the advantage of measuring directly the image motion and scintillation imparted by the dynamic spatial and temporal structure of local perturbations in the index of refraction along the light path, with a clean separation from seeing induced in the atmosphere above the dome. The strobed-source approach allows for rapid image motion and scintillation to be measured directly on the focal plane, even for large-aperture telescopes with wide-field instruments and slow shutters, such as that being constructed for the Rubin Observatory. A conceptual design is presented that uses the ‘guider’ CCDs in the Rubin telescope focal plane to make local-seeing measurements on demand, perhaps even during science exposures.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRS1989

Zonal multigrid solution of compressible flow problems on unstructured and adaptive meshes

The simultaneous use of adaptive meshing techniques with a multigrid strategy for solving the 2-D Euler equations in the context of unstructured meshes is studied. To obtain optimal efficiency, methods capable of computing locally improved solutions without recourse to global recalculations are pursued. A method for locally refining an existing unstructured mesh, without regenerating a new global mesh is employed, and the domain is automatically partitioned into refined and unrefined regions. Two multigrid strategies are developed. In the first, time-stepping is performed on a global fine mesh covering the entire domain, and convergence acceleration is achieved through the use of zonal coarse grid accelerator meshes, which lie under the adaptively refined regions of the global fine mesh. Both schemes are shown to produce similar convergence rates to each other, and also with respect to a previously developed global multigrid algorithm, which performs time-stepping throughout the entire domain, on each mesh level. However, the present schemes exhibit higher computational efficiency due to the smaller number of operations on each level.

Mavriplis, Dimitri J.↗
NASA NTRS1986

A new method for reconstructing type III trajectories

A local density approximation (LDA) method is developed for reconstructing the trajectories of type III radio bursts through the interplanetary medium. The method uses the measured source directions and the measured frequency drift rates of the type III burst to determine the locations of the radio source in the interplanetary medium at consecutive frequency levels. The technique is used to reconstruct the trajectory of an actual type III burst and the results are compared to the trajectory obtained from the global density law method. The LDA method represents an improvement in that it utilizes more observed data on the type III burst and that it takes full account of the local density variations at the source locations.

Reiner, M. J.↗
NASA NTRS2007

Aerial Videography From Locally Launched Rockets

A method of quickly collecting digital imagery of ground areas from video cameras carried aboard locally launched rockets has been developed. The method can be used, for example, to record rare or episodic events or to gather image data to guide decisions regarding treatment of agricultural fields or fighting wildfires. The method involves acquisition and digitization of a video frame at a known time along with information on the position and orientation of the rocket and camera at that time. The position and orientation data are obtained by use of a Global Positioning System receiver and a digital magnetic compass carried aboard the rocket. These data are radioed to a ground station, where they are processed, by a real-time algorithm, into georeferenced position and orientation data. The algorithm also generates a file of transformation parameters that account for the variation of image magnification and distortion associated with the position and orientation of the camera relative to the ground scene depicted in the image. As the altitude, horizontal position, and orientation of the rocket change between image frames, the algorithm calculates the corresponding new georeferenced position and orientation data and the associated transformation parameters. The output imagery can be rendered in any of a variety of formats. The figure presents an example of one such format.

Lyle, Stacey D.↗
NASA NTRS1985

Texture classification by local rank correlation

A new approach to texture classification based on local rank correlation is proposed here. Its performance is compared with Laws' method which uses local convolution with feature masks. In the experiments, texture samples are classified based on their distribution of local statistics, either rank correlations or convolutions. The new method achieves generally optimal classification rates. It appears to be more robust because local order statistics are unaffected by local sample differences due to monotonic shifts of texture gray values and are less sensitive to noise.

Harwood, D.↗