SEARCH · Search NASA

Results for “NANOPARTICLES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

286 records · Page 16

All sources NASA NTRS DOE OSTI

NASA NTRSDate not supplied

Effects of Random Micron-Sized Roughness on Swept-Wing Transition

This study examines the effect of random micron-sized distributed roughness on stationary crossflow instabilities. The roughness parameters are varied by creating nanoparticle coatings of various formulations and applying them to inserts that cover approximately the first 14% of the model. In addition to the baseline configuration (no added roughness, root-mean-square (RMS) ≈ 0.42 𝜇m), panels with RMS roughness values of 4.8 and 8.6 𝜇m were tested, with correlation lengths of 1029 and 385 𝜇m, respectively. Despite the significant roughness levels tested, the transition location was found to be only mildly impacted by the additional roughness, and the roughness panel with lower RMS amplitude caused a larger upstream movement of transition, on average. However, the stationary crossflow amplitudes and wavelength content were found to vary substantially depending on the roughness input. In particular, the panel with higher RMS roughness amplitude resulted in significantly larger amplitudes in the 7.5-9 mm wavelength range at the farthest upstream measurement station, while the lower roughness panel resulted in mildly larger amplitudes at 10 mm and wavelengths larger than 15 mm. Nonlinear Parabolized Stability Equations (PSE) computations were performed to attempt to estimate the initial amplitudes of the stationary crossflow instabilities. Wavelength spectra were matched at the most upstream measurement location, but large discrepancies exist between the predicted and measured growth behavior farther downstream, thus, more work is required to improve confidence in initial amplitude estimates.

boundary-layer transition↗

NASA NTRSDate not supplied

Effects of Random Micron-Sized Roughness on Swept-Wing Transition

boundary-layer transition↗

NASA NTRSDate not supplied

A Study of the Kinetics of the CO Oxidation Catalyst in a Human Spaceflight Fire Cartridges as a Method to Understand and Predict Performance

Fire Cartridges (FC) are an integral part of fire response on ISS, Orion and Gateway. When a pair of FCs are integrated with an Emergency Mask, they can be used to provide safe breathing air on these vehicles in a post-fire environment. The FCs have two primary mechanisms for removing contaminants from the air, an activated carbon (AC) bed which adsorbs the majority of fire byproducts, and a catalyst bed consisting of gold nanoparticles supported on iron oxide which oxidized CO to CO2 under near ambient conditions. While the FC catalyst has proven its ability to convert CO under relevant conditions, this paper attempts to address the apparent inconsistent performance of the catalyst seen in testing. Numerous variables effect the performance of the catalyst, including but not limited to: reaction environment, reactant gas composition, inert gas composition, catalyst age, and catalyst lot. This paper discusses the importance of these variables and attempts a fundamental mechanistic explanation for the effects of each variable. The fundamental mechanisms are then used to establish the magnitude of expected performance variability, which were validated against real test data of flight quality FCs.

Fire Cartridge↗

NASA NTRS2023

ChIPPS: Charged Information-storage Polymer Preparation System

Technological advances are required to support principal science objectives of missions to the solar system’s icy worlds to seek biosignatures of past/extant life. Sensitivity and reliability are key concerns due to small sample sizes (µL – mL) and the extraordinary import of the results. The preparation and processing of small samples can constrain limits of detection (LoDs); therefore, the Charged Information-storage Polymer Preparation System (ChIPPS) project is advancing the technologies of autonomous sample preparation and processing to add a new class of reliably detectable biosignatures: charged polymers and particles, which can be the information storage-and-transmission means for life. Specifically, we are developing an integrated microfluidic sample-processing unit to prepare icy-world samples to support complementary solid-state nanopore-based analyses: 1) charged-polymer analysis, to characterize variations in polymer chain size, shape, and charge vs. position along the chain; 2) polymer and nanoparticle sizing-and-counting, to characterize the relative abundance of polymer chains, as well as small (virus-sized) particles, by their dimensions and charge. Although no such autonomous system presently exists, such measurements can reveal the nature and abundance of charged polymers that could be used by biological systems to store and transfer information—as DNA and RNA are used terrestrially—without limitation to terrestrial nucleic acids, given that life elsewhere may utilize different information store-and-transfer moieties. Key system components include (a) a lysis unit for mechanical sample disruption; b) an ion-exchange column for charged macromolecule/nanoparticle purification; c) dialyzer to remove excess salt; d) concentrator to enhance signal; e) supporting pumps, valves, bubble traps, connectors, filters, etc.; f) interface to nanopore detection instruments.

Space Biology↗

NASA NTRSDate not supplied

Contrails Measurement and Testing Capabilities in NASA's Particulate Aerosol Laboratory

The NASA Glenn Research Center Particulate Aerosol Laboratory (PAL) is a ground test facility for studying emissions and contrails at upper atmospheric conditions. The facility consists of a small-scale combustor that generates hot combustion gases and soot nanoparticles, which flow through a transition pipe into a jet nozzle, which exhausts into an altitude chamber. Thermodynamic conditions experienced in flight are matched in the altitude chamber, allowing the study of ice particle formation of simulated aircraft engine exhaust plumes. A non-intrusive optical diagnostic technique based on Mie scattering provides ice particle size, number density, and mass density. A suite of commercial extractive particle measurement instruments provides estimates of soot number density, size, and black carbon mass distributions. Measurements are presented for various fuels at chamber conditions covering an altitude range of 20,000 ft (6 km) to 45,000 ft (14 km) altitude and ambient temperatures from -48°C to -68°C. The data presented demonstrate the effect of soot number density, altitude, and fuel-to-air equivalence ratio on the contrail ice particle formation. Ice mass density measurements are compared to values predicted by a thermodynamic plume similarity solution.

Optical Instrumentation↗

NASA NTRS2023

Investigating the Effects of Space Weathering in Ryugu Samples Using Coordinated Microanalyses

Airless planetary surfaces are characterized by a distinct lack of an atmosphere or magnetic field, leading to direct exposure to the effects of hypervelocity micrometeoroid impacts and solar wind ion irradiation [1]. These processes, cumulatively known as space weathering, gradually alter the microstructural and chemical properties of the grains on airless surfaces. Signatures of space weathering include vesiculated textures, amorphous grain rims (upper ~100 nm), solar flare tracks, and Fe-bearing nanoparticles (npFe) [2,3]. The accumulation of these microstructural space weathering characteristics, particularly the presence of npFe, alters the spectral properties of airless regoliths resulting in changes in spectral slope and reflectance of the surfaces, and the attenuation of characteristic absorption bands in the visible to near-infrared (Vis-NIR) wavelengths. These spectral changes complicate our ability to accurately interpret the mineralogy of airless bodies via remote sensing spectroscopy [1,4]. Studies of space weathering have primarily focused on anhydrous silicate minerals, reflecting the main components of the available returned samples from the Moon and S-type asteroid Itokawa [3,5,6]. However, our understanding of space weathering of primitive, organic-rich carbonaceous materials is still a work in progress. The Japan Aerospace Exploration Agency (JAXA)’s Hayabusa2 mission offered the first opportunity to directly investigate carbonaceous asteroids by returning samples from C-type asteroid (162173) Ryugu. Initial studies of Ryugu samples show mineralogical similarities to CI chondrites along with surface modifications consistent with space weathering. These surface modifications are primarily in the form of μm-thick silicate melts, amorphized phyllosilicates, glassy spherules, and burst vesicles [3,7]. Here, we report results from coordinated microanalytical techniques to further our understanding of the mineralogy and space weathering of carbonaceous materials.

L E Melendez↗

NASA NTRS2024

Investigating Space Weathering of Ryugu Grains Using Electron Microscopy and X-Ray Computed Tomography

The effects of micrometeorite bombardment and solar wind ion irradiation – collectively known as space weathering – alter the microstructural, chemical, and spectral properties of airless surfaces. Characteristics of space weathering include vesiculated textures, amorphous grain rims (upper ~100 nm), and the production of Fe-bearing nanoparticles (npFe). The resulting modifications in the optical properties of the surface regolith include changes in spectral slope and overall reflectance of the surfaces as well as the attenuation of their characteristic absorption bands across VIS-NIR wavelengths. As the surface is continuously exposed to interplanetary space over time, the accrual of these features complicates the interpretation of remote sensing spectral data and the characterization of returned samples. Laboratory experiments that simulate solar wind irradiation and micrometeoroid impacts using carbonaceous analogs have revealed novel and complex microstructural and chemical changes, including the decrease in organic species concentrations and the reduction of Fe 3+ . In 2020, the Japan Aerospace Exploration Agency (JAXA)’s Hayabusa2 mission returned over 5 g of regolith particles from near- Earth C-type asteroid (162173) Ryugu – a unique opportunity to study space weathering on carbonaceous materials. Initial studies have established that the surface morphology and chemical signatures of space weathering in returned samples share characteristics with laser irradiation experiments simulating micrometeoroid bombardment, indicating that impacts are a significant space weathering mechanism operating on Ryugu. Here, we seek to improve our understanding of space weathering of carbonaceous asteroidal regolith grains by characterizing its effects directly on returned samples to determine the nature of space weathering on Ryugu. To do so, we performed coordinated analyses using electron beam techniques and X-ray computed tomography (XCT) to examine the effects of space weathering on grains returned from the surface of Ryugu by the Hayabusa2 mission.

L. E. Melendez↗

NASA NTRSDate not supplied

Development of a Generic Small-Satellite Payload for On-Orbit Characterization and Evaluation of Novel Radiation-Shielding Materials

There is a need for lightweight and novel radiation shielding for small satellites operating in LEO and beyond. Current state of the art shielding materials include aluminum and polyethylene, or no shielding due to weight and dimensional considerations. New materials are being developed which may offer advantages over current options. These materials include novel lightweight composites impregnated with metallic nanoparticles, chitin-derived bioplastics, and aerogel-family materials. A compact experiment platform that allows the simultaneous testing of a number of potential shielding materials will be useful in comparing and validating them. The effort now underway seeks to develop a miniaturized, modularized payload which will allow testing of materials using 1U CubeSat form factor modules with four scintillator radiation detectors arrayed behind four sample material windows exposed to space. The first proposed mission will utilize a 2U payload volume to host two test quartets enabling eight materials to be tested. Such a test platform can potentially be used as a hosted payload on a variety of spacecraft to test other materials in the future.

Avery D Brock↗

NASA NTRS2024

Grossite-Bearing Refractory Inclusions from Reduced CV Chondrites: Mineralogical and Oxygen Isotopic Constraints on the Parent Body Alteration History

We report the results of coordinated mineralogical, microstructural, and oxygen isotopic analyses of grossite-bearing refractory inclusions from reduced CV (Vigarano type) chondrites to obtain a more complete picture of secondary parent body alteration processes and conditions. Grossite (CaAl 4 O 7 ) occurs in cores of nodules in fine-grained Ca,Al-rich inclusions (CAIs) that likely represent aggregates of nebular condensates. In many occurrences, grossite has been partially replaced by hercynite [(Fe,Mg,Zn)Al 2 O 4 ], which displays complex microstructures and compositions, and magnetite nanoparticles. The alteration of grossite was a crystallographically-controlled, fluid-driven process that occurred via partial dissolution of grossite and subsequent precipitation of hercynite and magnetite during short-lived and low-temperature metasomatic alteration on the CV chondrite parent body. The constituent phases of grossite-bearing CAIs show heterogeneous oxygen isotopic compositions, with grossite and perovskite displaying systematically 16O-depleted compositions (Δ 17 O = −12‰ to −1‰) relative to uniformly 16 O-rich hibonite and spinel (Δ 17 O = −25‰ to −21‰). Melilite is variably 16 O-depleted (Δ 17 O = −25‰ to −2‰). The observed oxygen isotopic distribution is interpreted as a result of mineralogically controlled oxygen isotopic exchange with an 16 O-poor fluid on the CV chondrite parent body. Collectively, the presence of limited fluids played an important role in preferential alteration of grossite to hercynite and magnetite and various degrees of 16O depletion in grossite, perovskite, and melilite during thermal metamorphism. We conclude that, among refractory phases in the inclusions, grossite was the most susceptible to metasomatic reactions with Fe-rich fluids and the second most susceptible, after perovskite, to oxygen isotopic exchange with an 16 O-poor fluid during the thermal history of the CV chondrite parent asteroid.

Calcium-aluminum-rich inclusions↗

NASA NTRS2024

Crowd-Sourced Technology Challenge for Improving Visual Color Detection of Hydrazine and Monomethylhydrazine Vapors in Spacecraft Environments

NASA currently uses a visual colorimetric detection method for potential hydrazine, monomethylhydrazine (MMH), or unsymmetrical dimethylhydrazine (UDMH) contamination in the International Space Station. Astronauts exposed to propellants or their residues during extravehicular activities may transfer contaminants into the airlock. The colorimetric detection method employs the Contamination Detection Kit (CDK), which uses a potassium tetrachloroaurate redox reaction with the propellant hydrazine vapors and a color comparison card to determine airborne concentrations. Seeking ideas for improvement, the NASA Tournament Lab (NTL) crowdsourced a way to tackle the challenge of detecting hydrazine and MMH vapors using colorimetric detection methods. This Rid the Rocket competition drew over 200 participants and 20 submissions from around the world proposing innovative ways to develop a new chemical colorimetric detection method for hydrazine and MMH vapors on spacecraft. Using a phased approach to evaluate contestants, NASA eventually narrowed the field to five finalists from the United States, Romania, Taiwan, and India. Concept papers and hardware submissions were judged on feasibility, creativity, and ability to detect hydrazine and MMH vapors before being sent to the NASA White Sands Test Facility for laboratory evaluation. Finalists employed variations of sampling methods and color-detection chemistry using a variety of sampling pumps and indicator pads or solutions—including those employing potassium or hydrogen tetrachloroaurate, para -dimethylaminobenzaldehyde (PDAB), and modifiers including sodium metasilicate and cetyltrimethylammonium bromide—to enhance gold nanoparticle formation and surface plasmon resonance (SPR) resulting in visual blue to purple color development. This paper presents a summary of the crowdsourced submissions and results of laboratory testing.

Crowd-Sourced↗

NASA NTRS2024

A Coordinated Mineralogical and Oxygen Isotopic Study of Refractory Ca-Al-Rich Inclusions

Refractory Ca-Al-rich inclusions (CAIs) in primitive chondritic meteorites represent the oldest solids that formed in our Solar System. Coordinated analyses using multiple ion and electron-beam techniques are vital to fully understand complex nebular and asteroidal processes that CAIs may have experienced in the context of the formation and early evolution of our Solar System. We report the results of a coordinated mineralogical and oxygen isotopic study of unique grossite bearing CAIs from reduced CV (Vigarano type) carbonaceous chondrites using transmission electron microscopy and secondary ion mass spectrometry. Grossite (CaAl 4 O 7 ) occurs in cores of nodules in fine grained CAIs that likely represent aggregates of nebular condensates. In many occurrences, grossite has been partially replaced by hercynite [(Fe,Mg,Zn)Al 2 O 4 ], which displays complex microstructures and compositions, and magnetite nanoparticles. This grossite alteration likely occurred via crystallographically controlled metasomatic reactions with Zn, Fe-rich aqueous fluids on the parent asteroid. The constituent phases of grossite bearing CAIs show heterogeneous oxygen isotopic compositions . That is, grossite and perovskite are 16 O poor and melilite is variably 16 O-depleted in contrast to solar like, 16 O-rich hibonite and spinel. The observed oxygen isotopic distribution is interpreted as a result of mineralogically controlled oxygen isotopic exchange with an 16 O-poor fluid on the parent asteroid. Collectively, we conclude that the presence of limited fluids played an important role in preferential alteration of grossite to hercynite and magnetite and various degrees of 16 O depletion in grossite, perovskite, and melilite during thermal metamorphism on the CV chondrite parent asteroid.

Jangmi Han↗

NASA NTRS2024

Short-Term Elevated Temperature Mechanical Performance and Microstructure of A Niobium-Zirconium Alloy Produced via Laser Powder Bed Fusion In-Situ Alloying

Nb-1Zr is a readily fabricable, dispersion-strengthened niobium alloy with improved elevated temperature properties compared to commercially pure niobium. This low to moderate strength niobium alloy is desirable in thermal management systems for fission power and propulsion applications; however, pre-alloyed spherical feedstock for powder-based additive manufacturing processes is generally unavailable. Laser powder bed fusion (L-PBF) in-situ alloying of a Nb-1Zr chemistry was performed using a high-purity niobium feedstock coated with 1 wt% of zirconium-based ceramic compound nano-powders: ZrO 2 , ZrC, and ZrH 2 . The additively manufactured material was mechanically tested at elevated temperatures within a controlled environment in the as-built condition. For comparison, traditionally manufactured wrought feedstock was also tested within an identical environment. Examination of the materials’ microstructure and short-term elevated temperature mechanical response determined: in-situ alloying of spherical Nb powder feedstock with Zr-based ceramic nanoparticles can be successfully implemented; the ZrO 2 addition offered the greatest elevated temperature stability and strength but exhibited brittle behavior; the ZrC addition achieved a balance of room temperature ductility and elevated temperature strength; and the ZrH 2 -modified material had the lowest as-built interstitial content and showed high ductility with mechanical performance most similar to wrought Nb-1Zr.

Niobium Alloy↗

NASA NTRS2024

Impact of Random Micron-Sized Surface Roughness on Stationary Crossflow Instabilities

This study examines the effect of random micron-sized distributed roughness on stationary crossflow (SCF) instabilities. The roughness parameters are varied by creating nanoparticle coatings of various formulations and applying them to inserts that cover approximately the first 14% of the swept flat-plate model. In addition to the baseline configuration (no added roughness, root-mean-square (RMS) ≈ 0.4 µm ), 5 panels with RMS roughness values of 4.8 up to 17 µm and correlation lengths ranging from 92 to 876 µm were tested. Despite the significant roughness levels tested, the transition location was found to be only mildly impacted by the additional roughness. However, the SCF amplitudes and wavelength content were found to vary substantially depending on the roughness input. The results were somewhat unexpected, in that the panel with the highest roughness RMS level did not result in the largest initial amplitudes, nor did the panel with the most energy in the SCF wavelength range. Rather, the panel with the most energy in the smaller wavelengths resulted in the largest SCF amplitude. There were, however, significant variations in the results when the panels were rotated by 180 ◦ , indicating that the important factor for some of the panels may be isolated peaks that occur near the neutral point.

stationary crossflow instabilities↗

NASA NTRSDate not supplied

Development of a Universal Small-Satellite Payload for On-Orbit Characterization and Evaluation of Novel Radiation-Shielding Materials

There is a need for novel lightweight radiation shielding materials for small satellites operating in LEO and beyond. Current commonly used shielding materials include aluminum and polyethylene, though often no additional shielding than that provided by structure is used due to mass and dimensional constraints. New materials are being developed which may offer advantages over these current solutions. These materials include novel lightweight composites impregnated with metallic nanoparticles, chitin-derived bioplastics, and aerogel-family materials. A compact CubeSat experiment payload that allows the simultaneous testing of numerus potential shielding materials would be useful to enable material comparison and efficacy validation. An effort currently underway seeks to develop such a miniaturized modularized payload, which will enable the testing of materials in 1U CubeSat form factor modules, with each module hosting four scintillator radiation detectors arrayed behind four sample material windows exposed to space. The first proposed mission will utilize a 2U payload volume to host two test quartets enabling eight materials to be tested. Such a test platform can potentially be used as a hosted payload on a variety of spacecraft to test additional materials in the future

Luke Idziak↗

NASA NTRS2026

A Dispersion-Strengthened Low-Density Niobium Alloy and Its Elevated Temperature Mechanical Performance

In response to the elevated-temperature and weight-reduction demands of modern aerospace applications, a novel oxide-dispersion-strengthened low-density niobium alloy (LDNb-ODS) was fabricated using laser powder bed fusion (L-PBF). To overcome powder procurement barriers, L-PBF feedstock was produced by blending commercial Nb521, Ti64, and Cr powder with Y2O3 nanoparticles via resonant acoustic mixing. Following L-PBF and a 1400°C vacuum heat treatment, the alloy achieved a density of 6.73 g/cc and a fine mean grain size of 4.62 µm stabilized by uniform ~30 nm yttria dispersoids. Microstructural analysis revealed a chemically inhomogeneous build with lack-of-fusion defects and a titanium (Ti) shift from a nominal 31.5 wt% in the starting powder blend to 24.8 wt% in the printed part due to preferential Ti loss during printing. Elevated-temperature tensile testing demonstrated that LDNb-ODS maintained a superior specific yield strength of 60-85 MPa/(g/cc) up to 800°C, outperforming nickel-based alloys Ni625, Ni230, and GRX-810. Between 870°C and 950°C, its specific strength surpassed both Ni718 and Ni625. In rapid stress-rupture testing at 1093°C and 20.7 MPa, uncoated LDNb-ODS survived 21.4 hours (a tenfold increase over legacy C-103) while an R512E silicide coating extended rupture life to 84.8 hours, confirming that oxidation accelerates low-stress failure. These findings demonstrate that additive manufacturing of LDNb-ODS provides a viable, lightweight alternative to nickel-based superalloys for high-temperature (>850°C) aerospace components.

Low Density Niobium Alloy↗

NASA NTRSDate not supplied

Morphological evolution and transition at nanoscale in BSTO ceramic materials

Considerable efforts have been devoted for the development of low cost ferroelectric and clean energy storage multifunctional materials. Modification in design and production of a low cost material with well proven process provides pathway for high energy density dielectric energy storage. We studied fluorine doped a commercially well-established material system barium strontium titanate with two different concentrations of dopants and studied the morphological transition and its effect on properties. It was observed that sample with higher concentration transitioned much faster into glassy state, followed by growth of fibers which turned into a self-arranged bird nest type shape. The sample with lower concentration changed slowly into glassy state and only few fibers were farmed. Dielectric was highly dependent on processing methods and shows variation with crystallinity of material, temperature and cooling conditions during processing. In the higher concentration range, we observed nano-scale interface breakdown very similar to that of solid-liquid interface breakdown during crystal growth.

dielectric↗