Search NASA⌕ Search

SEARCH · Search NASA

Results for “Substitutional Doping”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Electronic and structural properties of single-crystal Jahn–Teller active Co 1+x Mn 2–x O 4 thin films

Recent investigations on spinel CoMn 2 O 4 have shown its potential for applications in water splitting and fuel cell technologies as it exhibits strong catalytic behavior through oxygen reduction reactivity. To further understand this material, we report for the first time the synthesis of single-crystalline Co 1+x Mn 2-x O 4 thin films using molecular beam epitaxy. By varying sample composition, we establish links between cation stoichiometry and material properties using in-situ x-ray photoelectron spectroscopy, x-ray diffraction, scanning transmission electron microscopy, x-ray absorption spectroscopy, and spectroscopic ellipsometry. Our results indicate that excess Co ions occupy interstitial tetrahedral sites up to a certain stoichiometry, then are substitutional for octahedrally-coordinated Mn beyond this threshold. Here, we compare these results with density functional theory models of stoichiometric CoMn 2 O 4 to understand how the Jahn-Teller distortion and hybridization in Mn-O bonds impact the ability to hole dope the material with excess Co. The findings provide important insights into CoMn 2 O 4 and related spinel oxides for future application as inexpensive oxygen reduction reaction catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Recent progress in MnBi2 n Te3 n +1 intrinsic magnetic topological insulators: crystal growth, magnetism and chemical disorder

ABSTRACT The search for magnetic topological materials has been at the forefront of condensed matter research for their potential to host exotic states such as axion insulators, magnetic Weyl semimetals, Chern insulators, etc. To date, the MnBi2nTe3n+1 family is the only group of materials showcasing van der Waals-layered structures, intrinsic magnetism and non-trivial band topology without trivial bands at the Fermi level. The interplay between magnetism and band topology in this family has led to the proposal of various topological phenomena, including the quantum anomalous Hall effect, quantum spin Hall effect and quantum magnetoelectric effect. Among these, the quantum anomalous Hall effect has been experimentally observed at record-high temperatures, highlighting the unprecedented potential of this family of materials in fundamental science and technological innovation. In this paper, we provide a comprehensive review of the research progress in this intrinsic magnetic topological insulator family, with a focus on single-crystal growth, characterization of chemical disorder, manipulation of magnetism through chemical substitution and external pressure, and important questions that remain to be conclusively answered.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Giant electron–phonon coupling of the breathing plane oxygen phonons in the dynamic stripe phase of $\hbox {La}_{1.67}\hbox {Sr}_{0.33}\hbox {NiO}_4$

Doped antiferromagnets host a vast array of physical properties and learning how to control them is one of the biggest challenges of condensed matter physics. La 1.67 Sr 0.33 NiO 4 (LSNO) is a classic example of such a material. At low temperatures holes introduced via substitution of La by Sr segregate into lines to form boundaries between magnetically ordered domains in the form of stripes. The stripes become dynamic at high temperatures, but LSNO remains insulating presumably because an interplay between magnetic correlations and electron–phonon coupling localizes charge carriers. Magnetic degrees of freedom have been extensively investigated in this system, but phonons are almost completely unexplored. We searched for electron–phonon anomalies in LSNO by inelastic neutron scattering. Giant renormalization of plane Ni–O bond-stretching modes that modulate the volume around Ni appears on entering the dynamic charge stripe phase. Other phonons are a lot less sensitive to stripe melting. Dramatic overdamping of the breathing modes indicates that dynamic stripe phase may host small polarons. We argue that this feature sets electron–phonon coupling in nickelates apart from that in cuprates where breathing phonons are not overdamped and point out remarkable similarities with the colossal magnetoresistance manganites.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Achieving High-Yield Conversion of Janus Transition Metal Dichalcogenides on Diverse Substrates

Janus transition metal dichalcogenides (TMDCs) with intrinsic broken mirror symmetry and vertical dipole moment provide an additional degree of freedom to manipulate material symmetry down to atomic-layer thickness. However, despite advances in synthesis strategies, fundamental understanding of this atomic substitution process remains limited, which has impeded their implementation in advanced devices. Here, by using a room-temperature atomic-layer substitution (RT-ALS) strategy, we systematically investigate the critical factors facilitating the high-yield conversion of Janus TMDCs on diverse substrates. Combining Raman spectroscopy probes, X-ray photoelectron spectroscopy (XPS) measurements, and density functional theory (DFT) calculations, we demonstrate that substrates with enhanced electron doping or larger surface polarity substantially benefit the conversion of Janus TMDCs reaching a near-unity yield. Intriguingly, the strong affinity between Janus TMDCs and substrates (e.g., Au) brings about abnormal Raman spectroscopic phenomena. These findings highlight the significance of substrates in achieving the reliable synthesis of Janus two-dimensional materials with improved homogeneity on various substrates. In addition, this takes us one step closer to utilizing Janus TMDCs as a versatile platform in next-generation optoelectronic devices, sensors, and quantum technologies.

Doping↗
DOE OSTI2024

Segregation of Al and its effect on coercivity in Nd-Fe-B

Doping a small amount of Al can effectively enhance coercivity in Nd-Fe-B magnets. Here we investigated the partitioning behavior of Al and its effect on coercivity in Nd-Fe-B using first principles DFT (density functional theory) calculation and micromagnetic simulation. The calculated substitution energies of Fe by Al are negative at the crystallographic sites of 4c and 8j 2 while they are positive values at the other sites in Nd 2 Fe 14 B (2:14:1), implying a small solubility of Al in 2:14:1. Further, Al prefers to segregate at grain boundary (GB) and stabilize the Nd-Fe-Al phase with a Nd 6 Fe 13 Si-type tetragonal structure (6:13:1). The formation of the antiferromagnetic or weak ferrimagnetic 6:13:1-like phase depletes Fe and reduces the amount of ferromagnetic Nd–Fe type grain boundary phase (GBP), which weakens the inter-grain magnetic interaction. Micromagnetic simulations indicate that the 6:13:1-like GBP increases the pinning field of magnetic domain wall at GB and suppresses the nucleation of reversal magnetic domain on the grain surface of 2:14:1 during demagnetization process. The formation of Al-rich shell on 2:14:1 grain surface can further moderately increase the domain pinning field at GB and the nucleation field of 2:14:1 grain. Developing novel processing method to tailor Al segregation and promote formation of 6:13:1-like phase at GB can be a promising approach to improve coercivity in Nd-Fe-B magnet.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Synthesis and structure of carbon-doped H 3 S compounds at high pressure

Understanding of recently reported putative close-to-room-temperature superconductivity in C-S-H compounds at 267 GPa demands a reproducible synthesis protocol as well as knowledge of the compounds' structure and composition. Here, we synthesized C-S-H compounds with various carbon compositions at high pressures from elemental carbon C and methane CH 4 , sulfur S, and molecular hydrogen H 2 . Here, we focus on compounds synthesized using methane as these allow a straightforward determination of their structure and composition by combining single-crystal x-ray diffraction and Raman spectroscopy. We applied a two-stage synthesis of [(CH 4 ) x (H 2 S) (1-x) ] 2 H 2 compounds with various compositions by first reacting sulfur and mixed methane-hydrogen fluids and forming CH 4 -doped H 2 S crystals at 0.5-3 GPa and then by growing single crystals of the desired hydrogen-rich compound. Raman spectroscopy applied to this material shows the presence of CH 4 molecules incorporated into the lattice and allows the determination of the CH 4 content, while single-crystal x-ray diffraction results suggest that the methane molecules substitute H 2 S molecules. The structural behavior of these compounds is very similar to the previously investigated methane-free crystals demonstrating a transition from Al 2 Cu type I4/mcm molecular crystal to a modulated molecular structure at 20-30 GPa and back to the same basic I4/mcm structure in an extended modification with greatly modified Raman spectra. This latter phase demonstrates a distortion into a Pnma structure at 132-159 GPa and then transforms into a common Im$\bar{3}$m H 3 S phase at higher pressures; however, no structural anomaly is detected near 220 GPa, where a sharp upturn in T c has been reported.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2019

Oxidation and anion lattice defect signatures of hypostoichiometric lanthanide-doped UO 2

A series of sintered UO 2 pellets doped with lanthanide (Ce, Nd, Yb) elements were investigated using powder X-ray diffraction, Raman spectroscopy, thermogravimetric analyses and differential scanning calorimetry. A combination of electron microprobe and thermogravimetric analyses, for oxygen content, enabled precise determination of the hypostoichiometry for lanthanide-doped samples at 1 and 5 atom percent. Two Raman laser wavelengths (785 and 455 nm) have afforded greater sensitivity to spectroscopic signatures of the phonon bands (1LO and 2LO) associated with oxidation of (U 1-y M y )O 2-x and the anion defects introduced by lanthanide substitution. Oxygen hypostoichiometry forces a reduction in the average coordination number surrounding (U,M) sites, which is compensated by a decrease in U-O bond length, and concomitantly the lattice parameter, consistent with the obtained Raman spectra. The evolution of O/M ratio up to (U 1-y M y )O 2 after oxidation was also examined using Raman spectroscopy, revealing that the ‘defect band’, including a component attributed to oxygen vacancies (~540 cm -1 ) and the 1LO phonon (~575 cm -1 ) increased in intensity with increasing dopant concentration and upon oxidation. Here, the lanthanide dopants inhibited oxidation to U 3 O 8 , most prominently for Yb 5 at%, having been delayed by ~180 °C. Thermogravimetric analyses reveal an early oxidation feature that may be related to influx of O to satisfy hypostoichiometry up to (U 1-y M y )O 2 , possibly stabilizing a U 4 O 9 or U 3 O 7 intermediate, delaying oxidation to U 3 O 8 .

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
NASA NTRS1982

Low NO subx heavy fuel combustor concept program. Phase 1A: Coal gas addendum

The performance and emissions from a rich-lean combustor fired on simulated coal gas fuels were investigated using a 12.7-cm diameter axially-staged burner originally designed for operation with high heating value liquid fuels. A simple, tubular fuel injector was substituted for the liquid fuel nozzle; no other combustor modifications were made. Four test fuels were studied including three chemically bound nitrogen-free gas mixtures with higher heating values of 88, 227, and 308 kj/mol (103, 258 and 349 Btu/scf), and a 227 kj/mol (258 Btu/scf) heating value doped with ammonia to produce a fuel nitrogen content of 0.5% (wt). Stable, ultra-low nitrogen oxide, smoke-free combustion was attained for the nitrogen-free fuels. Results with the doped fuel indicated that less than 5% conversion of NH3 to nitrogen oxide levels below Environmental Protection Agency limits could be achieved. In some instances, excessive CO levels were encountered. It is shown that use of a burner design employing a less fuel-rich primary zone than that found optimum for liquid fuels would yield more acceptable CO emissions.

Rosfjord, T.↗
DOE OSTI2026

Discovery of a new phase transition and high-valent redox mechanism in Fe-substituted Na 2 Mn 3 O 7

Sodium-ion batteries are a promising lower-cost alternative to lithium-ion batteries, but further improvements in electrochemical performance are required. One strategy to increase capacity is to enable reversible high-valent cationic and anionic redox in layered cathode materials; however, this is typically accompanied by structural degradation. Here, in this study, we elucidate the mechanism by which Fe-doped Na 2 Mn 3 O 7 , featuring ordered transition metal-vacancies, achieves reversible high-valent redox. Using Mössbauer spectroscopy, soft X-ray absorption spectroscopy (XAS), and in-situ hard XAS, we demonstrate reversible high-valent cationic redox involving both Fe and Mn while in-situ Raman confirms the absence of local structural degradation associated with oxygen redox. Combining in-situ X-ray diffraction with theoretical calculations, we further identify a previously unreported global phase transition from the $\bar{P1}$ to the $P2_1/c$ space group during electrochemical cycling and develop a physical model describing this structural evolution. These results provide insights for structurally stable layered sodium transition metal oxide cathodes with reversible high-valent redox.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Distribution of Copper States, Phases, and Defects across the Depth of a Cu-Doped CdTe Solar Cell

Copper has been used as a p-type dopant in cadmium telluride (CdTe) for decades. However, the density of Cu atoms in the finished device is much higher than that of holes, which means that most Cu atoms are not activated as acceptors during incorporation. Furthermore, studies have demonstrated that the distribution of copper (Cu) atoms across the device is highly inhomogeneous, with reports citing Cu substitution on Cd sites and segregation to grain boundaries. Fast diffusion along these boundaries and Cu accumulation at the CdTe/CdS interface have also been observed and validated computationally. These levels of inhomogeneity make it difficult to accurately characterize and correlate the performance with the nature of the Cu atomic species present. To address this challenge, we utilize X-ray microscopy and, specifically, nanoscale fluorescence-mode X-ray absorption near-edge structure to resolve the atomic Cu environment throughout the depth of the CdTe layer. Our results suggest that the majority of Cu atoms are in the form of Cu x Te phases (or similar local environments) near the ZnTe|CdTe interface, Cu x O phases in the CdTe absorber, and present in various oxidation states, including Cu 1+ and Cu 2+ , near the CdS/CdTe junction. Here this work also provides experimental evidence for the first time of the presence of CuS around the ZnTe|CdTe interface and the hypothesized Cu Cd -Cl i complex in the CdTe absorber.

14 SOLAR ENERGY↗
DOE OSTI2024

Magnetic properties of Lutetium and Yttrium doped Ce 2 Fe 14 B magnets

The increasing demand for Nd-Dy and Sm-Co based permanent magnets is exacerbating the current critical materials shortage, therefore improving and optimizing current candidate critical element free permanent magnets is necessary to develop future clean energy technologies. In this work, we aim to increase the thermal stability and magnetic performance of Ce 2 Fe 14 B based permanent magnets through the substitution of Ce ions with noncritical rare earth elements Lu and Y. The substitution of Lu (x=0; 0.05; 0.1; 0.15) for Ce ions in (LuxCe 2-x )Fe 14 B was unsuccessful, likely due to disparities in ionic size and valencies, and failed to exhibit improved thermal stability or magnetic performance. In contrast, Y substitution for Ce ions in (Y x Ce 2-x )Fe14B (x= 0.1; 0.2; 0.3; 0.4; 0.5) alloys was successful. Notably, these alloys demonstrated enhanced thermal stability, as evidenced by an increase in the Curie temperature, reaching a peak of 443 K at x= 0.5. Y substitution also helped to suppress the CeFe2 Laves phase. Without loss of the anisotropy field Y substitution increased the saturation magnetization, MS, peaking at MS = 125 emu/g for a Y concentration of x= 0:4, demonstrating (Y 0.4 Ce 1.6 )Fe 14 B as a potential critical element free permanent magnet with an energy product as high as 29 MGOe. This work is advantageous in developing low cost high performance permanent magnets with reduced or little to no critical rare earth elements.

Rai, Binod K.↗
DOE OSTI2025

Quantum oscillation studies of the nodal line semimetal Ni 3 In 2 S 2-x Se x

Ternary shandite compounds with the general formula T 3 M 2 X 2 (T = Ni, Co, Rh or Pd; M = Sn, In, or Pb; and X = S or Se) have emerged as a large pool of topological semimetals. This family of compounds hosts different topological phases for various combinations of T, M and X. This paper reports the observation of quantum oscillations under the high magnetic fields in Ni 3 In 2 S 2-x Se x single crystals. Angular dependence of oscillation frequency suggests an evolution of the Fermi surface from three-dimensional to two-dimensional on Se substitution for S in Ni 3 In 2 S 2 . Here, the effective mass obtained for each composition by fitting the oscillation amplitude with the Lifshitz-Kosevich formula, shows no significant change, suggesting that the topological phase might be relatively robust against enhanced spin-orbit coupling upon Se doping in Ni 3 In 2 S 2 .

36 MATERIALS SCIENCE↗
DOE OSTI2020

Evolution of the structural transition in Mo 1–x W x Te 2

The composition dependence of the structural transition between the monoclinic 1T' and orthorhombic Td phases in the Mo 1–x W x Te 2 Weyl semimetal was investigated by elastic neutron scattering on single crystals up to x ≈ 0.54. First observed in MoTe 2 , the transition from T d to 1T' is accompanied by an intermediate pseudo-orthorhombic phase, T d *. Upon doping with W, the T d * phase vanishes by x ≈ 0.34. Above this concentration, a phase coexistence behavior with both T d and 1T' is observed instead. The interlayer in-plane positioning parameter δ, which relates to the 1T' β angle, decreases with temperature as well as with W substitution, likely due to strong anharmonicity in the interlayer interactions. As a result, the temperature width of the phase coexistence remains almost constant up to x ≈ 0.54, in contrast to the broadening reported under pressure.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Influence of Surface Ligands on Energetics at FASnI 3 /C 60 Interfaces and Their Impact on Photovoltaic Performance

Interfacial chemistry and energetics significantly impact the performance of photovoltaic devices. In the case of Pb-containing organic metal halide perovskites, photoelectron spectroscopy has been used to determine the energetic alignment of frontier electronic energy levels at various interfaces present in the photovoltaic device. For the Sn-containing analogues, which are less toxic, no such measurements have been made. Through a combination of ultraviolet, inverse, and X-ray photoelectron spectroscopy (UPS, IPES, and XPS, respectively) measurements taken at varying thickness increments during stepwise deposition of C 60 on FASnI 3 , we present the first direct measurements of the frontier electronic energy levels across the FASnI 3 /C 60 interface. The results show band bending in both materials and transport gap widening in FASnI 3 at the interface with C 60 . The XPS results show that iodide diffuses into C 60 and results in n-doping of C 60 . This iodide diffusion out of FASnI 3 impacts the valence and conduction band energies of FASnI 3 more than the core levels, with the core level shifts displaying a different trend than the valence and conduction bands. Surface treatment of FASnI 3 with carboxylic acids and bulky ammonium substituted surface ligands results in slight alterations in the interfacial energetics, and all surface ligands result in similar or improved PV performance relative to the untreated devices. Finally, the greatest PV stability results from treatment with a fluorinated carboxylic acid derivative; however, iodide diffusion is still observed to occur with this surface ligand.

interfacial energetics↗
DOE OSTI2024

Enhancing the Reaction Kinetics and Stability of Co‐Free Li‐Rich Cathode Materials via a Multifunctional Strategy

Co-free Li-rich layered oxides (CFLLOs) with anionic redox activity are among the most promising cathode materials for high-energy-density and low-cost lithium-ion batteries (LIBs). However, irreversible oxygen release often causes severe structural deterioration, electrolyte decomposition, and the formation of unstable cathode-electrolyte interface (CEI) film with high impedance. Additionally, the elimination of cobalt elements further deteriorates the reaction kinetics, leading to reduced capacity and poor rate performance. Here, in this study, a multifunctional strategy is proposed, incorporating Li 2 MnO 3 phase content regulation, micro-nano structure design, and heteroatom substitution. The increased content of Li 2 MnO 3 phase enhances the capacity through oxygen redox. The smaller nanoscale primary particles induce greater tensile strain and introduce more grain boundaries, thereby improving the reaction kinetics and reactivity, while the larger micron-sized secondary particles help to reduce interfacial side reactions. Furthermore, Na⁺ doping modulates the local coordination environment of oxygen, stabilizing both the anion framework and the crystal structure. As a result, the designed cathode exhibits enhanced rate performance, delivering a capacity of 158 mAh g⁻¹ at 5.0 C and improved cyclic stability, with a high capacity retention of 99% after 400 cycles at 1.0 C. This multifunctional strategy holds great promise for advancing the practical application of CFLLOs in next-generation LIBs.

Co-free Li-rich layered oxide↗
NASA NTRSDate not supplied

Importance of Sulfur for Phosphorus Mobility on the Martian Surface

Sulfur and phosphorus were mobile on the martian surface, and we present evidence that sulfate was likely a control on phosphate mobility. Mobility of the two elements on the martian surface is crucial for the habitability of Mars because their availability for biochemical reactions and biological structures is a major constraint on life. In the sedimentary rocks of Gale crater, the rover Curiosity has discovered evidence of mobile S and P with the alpha particle X-ray spectrometer (APXS). Sulfur-rich fluids are evident in ubiquitous Ca-sulfate veins that crosscut the bedrock. Compelling evidence of P mobility is in nodules, veins, crusts, and haloes with P2O5 enrichments (1.5-7.5 wt%) relative to the median bedrock (0.9-1.2 wt%) and average basaltic crust (~0.9 wt%). We have investigated phosphorus mobility in Hawaiian analogues, where the primary P2O5 (0.2-2.1 wt%) is contained in Ca-apatite. Four relevant processes have emerged: (1) In open-system, circumneutral regolith weathering profiles, we found up to 40% of the P was leached over 10s-100s ka. (2) Natural acid-sulfate alteration at the Maunakea summit resulted in the dissolution of apatite and mobilization of phosphate 10s-1000s µm to rock surfaces where it formed Al-phosphates and substituted into crystalline sulfates (alunite and jarosite). (3) Experimental results indicate that basaltic sediment chemisorbs phosphate (pH < 7). (4) In experimental systems containing water, basaltic sediment, and a starting pH = 2-7, phosphate has higher solubility in chloride-rich fluids, but significantly lower solubility in sulfate-rich fluids. For example, in water doped with phosphate (~100-500 mg/L), ~60-80% of the PO43- was removed from the sulfate-rich fluid, whereas ~20% of the PO43- was removed from the Cl-rich and pure water fluids (likely via adsorption). Gypsum precipitated from the sulfate-rich fluids; the fate of phosphate in the solid residue is unconfirmed. The potential for phosphate incorporation in martian sulfates is reflected in the enrichment of P2O5 in Gale Ca-sulfate veins, based on preliminary analyses of APXS data. Models for the mobility of phosphorus in Gale crater should consider these conflicting P characteristics: (1) P solubility may have been inhibited by sulfate and (2) P¬ is enriched in diagenetic features and was therefore mobile.

Jeff A. Berger↗