Search NASA⌕ Search

SEARCH · Search NASA

Results for “analysis ready data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16

GOES-R L1b Readiness Implementation and Management Plan

A complement of Readiness, Implementation and Management Plans (RIMPs) to facilitate management of post-launch product test activities for the official Geostationary Operational Environmental Satellite (GOES-R) Level 1b (L1b) products have been developed and documented. Separate plans have been created for each of the GOES-R sensors including: the Advanced Baseline Imager (ABI), the Extreme ultraviolet and X-ray Irradiance Sensors (EXIS), Geostationary Lightning Mapper (GLM), GOES-R Magnetometer (MAG), the Space Environment In-Situ Suite (SEISS), and the Solar Ultraviolet Imager (SUVI). The GOES-R program has implemented these RIMPs in order to address the full scope of CalVal activities required for a successful demonstration of GOES-R L1b data product quality throughout the three validation stages: Beta, Provisional and Full Validation. For each product maturity level, the RIMPs include specific performance criteria and required artifacts that provide evidence a given validation stage has been reached, the timing when each stage will be complete, a description of every applicable Post-Launch Product Test (PLPT), roles and responsibilities of personnel, upstream dependencies, and analysis methods and tools to be employed during validation. Instrument level Post-Launch Tests (PLTs) are also referenced and apply primarily to functional check-out of the instruments.

Validation Readiness↗

Crystal structure of glutamate-1-semialdehyde-2,1-aminomutase from Arabidopsis thaliana

A structural study of A. thaliana glutamate-1-semialdehyde-2,1-aminomutase (GSAM) has revealed asymmetry in cofactor binding as well as in the gating-loop orientation, which supports the previously proposed negative cooperativity between monomers of GSAM. Glutamate-1-semialdehyde-2,1-aminomutase (GSAM) catalyzes the isomerization of glutamate-1-semialdehyde (GSA) to 5-aminolevulinate (ALA) and is distributed in archaea, most bacteria and plants. Although structures of GSAM from archaea and bacteria have been resolved, a GSAM structure from a higher plant is not available, preventing further structure–function analysis. Here, the structure of GSAM from Arabidopsis thaliana (AtGSA1) obtained by X-ray crystallography is reported at 1.25 Å resolution. AtGSA1 forms an asymmetric dimer and displays asymmetry in cofactor binding as well as in the gating-loop orientation, which is consistent with previously reported Synechococcus GSAM structures. While one monomer binds PMP with the gating loop fixed in the open state, the other monomer binds either PMP or PLP and the gating loop is ready to close. The data also reveal the mobility of residues Gly163, Ser164 and Gly165, which are important for reorientation of the gating loop. Furthermore, the asymmetry of the AtGSA1 structure supports the previously proposed negative cooperativity between monomers of GSAM.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

ThermoLift – A Natural Gas Fired Air Conditioner and Heat Pump

ThermoLift is developing TC-Cycle™, a natural-gas driven air conditioner and cold-climate heat pump that can provide space heating, water heating, and air conditioning in a single device. Unlike traditional heat-pump system, the TC-Cycle system uses helium as working fluid in place of high global warming potential HFC refrigerant. The system has broad application as a combined HVAC solution and technology development throughout this program has advanced the Technology Readiness Level (TRL) from TRL-1 to TRL-5 achieved in the Gen 3.0 prototype. In August of 2013, the US Department of Energy (DOE) provided Research and Development funding through the Building Technologies Innovations Program Funding Opportunity Announcement DE-FOA-0000823. The statement of work (SOW) outlined a deliverable of testing at ORNL and a final test report prepared to include various heating cooling temperature ranges and performance analysis. Furthermore, a milestone of this effort was to analyze all test data to establish further efficiency improvements and consider optimum manufacturing methodologies to facilitate the next level improvements. ThermoLift’s Gen 3.0 gas-fired heat pump was shipped and installed into ORNL’s test facility with most of the data reported herein obtained on August 6, 2018. Uninterrupted operation demonstrated cycle Coefficient of Performance (COP) well exceeding DOE targets for cold-climate heat pumps. Furthermore, there was no degradation in capacity as inlet (ambient) temperature decreased.

03 NATURAL GAS↗

Unique phase identification of trimetallic copper iron manganese oxygen carrier using simultaneous differential scanning calorimetry/thermogravimetric analysis during chemical looping combustion reactions with methane

Chemical looping combustion (CLC) is a promising combustion technology that generates heat and sequestration-ready carbon dioxide that is undiluted by nitrogen from the combustion of carbonaceous fuels with an oxygen carrier, or metal oxide. This process is highly dependent on the reactivity and stability of the oxygen carrier. The development of oxygen carriers remains one of the major barriers for commercialization of CLC. Synthetic oxygen carriers, consisting of multiple metal components, have demonstrated enhanced performance and improved CLC operation compared to single metal oxides. However, identification of the complex mixed metal oxide phases that form after calcination or during CLC reactions has been challenging. Without an understanding of the dominant metal oxide phase, it is difficult to determine reaction parameters and the oxygen carrier reduction pathway, which are necessary for CLC reactor design. This is particularly challenging for complex multi-component oxygen carriers such as copper iron manganese oxide (CuFeMnO 4 ). This study aims to differentiate the unique phase formation of a highly reactive, complex trimetallic oxygen carrier, CuFeMnO 4 , from its single and bimetallic counterparts using thermochemical and reaction data obtained from simultaneous differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA) during temperature programmed reductions (TPR) with methane. DSC/TGA experiments during TPR with methane provides heat flow data and corresponding reaction rate data that can be used to determine reaction routes and mechanisms during methane reduction. Furthermore, non-isothermal TPR data provides the advantage of distinguishing reactions that may not be observable in isothermal analysis. The detailed thermochemical and reaction data, obtained during TPR with methane, distinguished a unique reduction pathway for CuFeMnO 4 that differed from its single and bimetallic counterparts. This is remarkable since X-ray diffraction (XRD) data alone could not be used to distinguish the reactive trimetallic oxide phase due to overlapping peaks from various single and mixed metal oxides. The unique reduction pathway of CuFeMnO 4 was further characterized in this study using in-situ XRD TPR with methane to determine changes in the dominant trimetallic phase that influenced the thermochemical and reaction rate data.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The Validation of Version 8 Ozone Profiles: Is SBUV Ready for Prime Time?

Ozone profile data are now available from a series of BUV instruments - SBUV on Nimbus 7 and SBW/2 instruments on NOAA 9, NOAA 11, and NOAA 16. The data have been processed through the new version 8 algorithm, which is designed to be more accurate and, more importantly, to reduce the influence of the a priori on ozone trends. As a part of the version 8 reprocessing we have attempted to apply a consistent calibration to the individual instruments so that their data records can be used together in a time series analysis. Validation consists of examining not only the mean difference from external datasets (i.e trends) but also consistency in the interannual variability of the data. Here we validate the v8 BUV data through comparison with ECC sondes, lidar and microwave measurements, and with SAGE II and HALOE satellite data records. We find that individual profiles generally agree with external data sets within +/-10% between 30 hPa and 1 hPa (approx. 24 - 50 km) and frequently agree within +/-5%. The interannual variability of the BUV ozone time series agrees well with that of SAGE II . On the average, different B W instruments usually agree within +/-5% with each other, though the relative error increases near the ends of the Nimbus 7 and NOAA 16 data records as a result of instrument problems. The combined v8 BUV data sets cover the 1979-2003 time period giving daily global coverage of the ozone vertical distribution to better accuracy than has ever been possible before.

McPeters, R. D.↗

High-throughput single-cell transcriptomics of bacteria using combinatorial barcoding

Microbial split-pool ligation transcriptomics (microSPLiT) is a high-throughput single-cell RNA sequencing method for bacteria. With four combinatorial barcoding rounds, microSPLiT can profile transcriptional states in hundreds of thousands of Gram-negative and Gram-positive bacteria in a single experiment without specialized equipment. As bacterial samples are fixed and permeabilized before barcoding, they can be collected and stored ahead of time. During the first barcoding round, the fixed and permeabilized bacteria are distributed into a 96-well plate, where their transcripts are reverse transcribed into cDNA and labeled with the first well-specific barcode inside the cells. The cells are mixed and redistributed two more times into new 96-well plates, where the second and third barcodes are appended to the cDNA via in-cell ligation reactions. Finally, the cells are mixed and divided into aliquot sub-libraries, which can be stored until future use or prepared for sequencing with the addition of a fourth barcode. It takes 4 days to generate sequencing-ready libraries, including 1 day for collection and overnight fixation of samples. Here, the standard plate setup enables single-cell transcriptional profiling of up to 1 million bacterial cells and up to 96 samples in a single barcoding experiment, with the possibility of expansion by adding barcoding rounds. The protocol requires experience in basic molecular biology techniques, handling of bacterial samples and preparation of DNA libraries for next-generation sequencing. It can be performed by experienced undergraduate or graduate students. Data analysis requires access to computing resources, familiarity with Unix command line and basic experience with Python or R.

59 BASIC BIOLOGICAL SCIENCES↗

Elastic wave analyzer for icy sub-surfaces (EWAIS) in the solar system

The sub-surface structures of water-bearing icy worlds (e.g., Europa, Enceladus, and Titan) and the structures of icy regions on Mars contain critical information about their origin and evolution. These bodies have been identified as high-priority targets in the NRC Planetary Science Decadal Survey, which noted a lack of technology readiness as one impediment to related missions. An Elastic Wave Analyzer for Icy Sub-surfaces (EWAIS) instrument is being developed to acquire data that can provide answers to fundamental science questions related to these bodies. The EWAIS instrument generates and receives elastic waves using an array of piezoelectric transducers capable of operating at temperatures as low as 30K. A developed breadboard acquires reflected signals from discontinuities in the traveled materials’ impedance (the product of wave velocity and density) along the wave path. Analysis of the acquired data can be used to determine the elastic properties, presence of cracks, locations of cavities and other discontinuities, as well as the thicknesses of ice and liquid layers. The EWAIS instrument is being developed with a novel dual-frequency transmitter array that will enable reaching distances of kilometers through ice, as well as resolving smaller acoustic reflectors nearer the EWAIS instrument. The selected dual frequencies correspond to two depth ranges that can be analyzed, with resolutions of tens of centimeters in the region of tens to hundreds of meters and tens of meters on the kilometers scale, respectively. The EWAIS will be applicable for operation from any in-situ platform, including surface assets (e.g., lander and rover) and sub-surface assets (e.g., melting probes).

Bar-Cohen, Y.↗

Coronal Abundances In Xi Boo A, Abundances in the Corona of FK Aqr and the Origin of Cosmic Ray

Both Xi Boo A and FK Agr observations have been acquired, reduced and analysed. The results of the Xi Boo A study were published in ApJ (Drake, J.J., Kashyap, V., 2001, Up, 547, 428). Work is ongoing to determine the coronet metallicity of FK Aqr based on EUVE spectra and DO photometer data, using the techniques developed in the Drake & Kashyap paper. Preliminary synthetic spectra for FK Aqr have been developed, and further work to heap define the hot plasma emission measure distribution is underway. Progress on spectral analysis has been hampered following the post-doctoral scientist, Vinay Kashyap, taking up new position. A suitable replacement has been difficult to find, but new hire is expected shortly. However, good progress has been made on analysis of DO photometric variations in FK Age, with a publication now ready (Kashyap, V., Drake, J.J., Guedel, M., Audard, M.) for submission to a mainstream astrophysical journal.

Drake, Jeremy↗

Reaction System Design for NO 2 Oxidation of Used Nuclear Fuel for the FY17 Hot Test

A dry pretreatment process based on the oxidation of used nuclear fuel to convert it to a fine powder is being studied for the removal and capture of tritium and iodine before subsequent processing. The process converts oxide fuel into a fine powder at low temperature using NO 2 /O 2 mixtures. The form of the powder product can be selected to be U 3 O 8 , UO 3 , or a nitrate by adjusting the processing conditions. All the fundamental tenets of the process have been successfully demonstrated as a proof of principle, and many aspects have been corroborated multiple times at laboratory scale. The present thrust is to develop the process to a technology-readiness level sufficient to evaluate and estimate the cost of an engineering-scale implementation. A previous roadmap analysis of the implementation determined that the most desirable approach would be based on kilogram-scale experiments using real fuel in parallel with multi-kg testing of prototype systems using surrogate material. Following the planned approach, kilogram-scale experiments will be conducted in FY 2017. This report describes the primary reaction system designs and the equipment that has been fabricated. Details related to instrumentation, data acquisition, and controls have been previously reported.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Navigation Sensor Technology Assessment Capability for Data-Driven Systems Analysis

The capability to assess the mission performance of novel navigation technologies from a systems-level approach and to provide quantitative results is crucial. With growing interest and innovations from NASA’s commercial partners, data-driven results that quantify the technological impact will guide research developments and facilitate stakeholder decision-making while requiring less time and resources. This paper presents a method to evaluate various sensor combinations and their impact on the overall system performance using an existing six degrees-of-freedom, physics-based engineering simulation for a government reference lunar lander as a testbed. Selected navigation technologies over various technology readiness levels, including Inertial Measurement Units, Navigation Doppler Lidar, and radar altimeter-radar velocimeter, were studied in this paper. Results using this testbed to perform sensitivity studies and to provide quantitative assessments are reported. One key finding is that there are diminishing returns for reducing sensor errors. The most influential sensor parameter to landing success are vehicle configuration and mission dependent. Results from this method could be used by stakeholders to make data-driven systems-based decisions and by technology developers as guidance for the specific parameter improvements that will have the most significant impact on mission success. This capability could be further used to assess alternative scenarios should one type of technology become unavailable or to re-assess initial assumptions and identify appropriate requirements from a system perspective.

Esther Lee↗

Distribution Systems Planning and Analysis Framework for Indian Feeders - Partnership with BSES/BRPL

Integration of distributed energy resources (DER) such as photovoltaics, electric vehicles (EVs) and battery energy storage systems (BESS) is expected to rapidly increase in distribution systems in India. These grid edge resources can have adverse impacts on the grid and can provide additional revenue streams as well. To mitigate these impacts distribution planning and analysis is required. So this paper presents a framework which can be used to complete all steps involved in distribution planning and analysis. This framework uses data in the same format as is readily available with Indian utilities and processes it to generate detailed feeder models and loading profiles. This framework already includes multiple DER use cases such as peak shaving for BESS and EV demand modelling and can be easily extended to simulate a number of additional use cases. All of these use cases can be simulated in parallel for multi-year time series simulations using an integrated command line interface. A suit of grid readiness metrics are then evaluated for each simulation to determine required network upgrades and associated costs.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Distribution Systems Planning and Analysis Framework for Indian Feeders: Preprint

Integration of distributed energy resources (DER) such as photovoltaics, electric vehicles (EVs) and battery energy storage systems (BESS) is expected to rapidly increase in distribution systems in India. These grid edge resources can have adverse impacts on the grid and can provide additional revenue streams as well. To mitigate these impacts distribution planning and analysis is required. So this paper presents a framework which can be used to complete all steps involved in distribution planning and analysis. This framework uses data in the same format as is readily available with Indian utilities and processes it to generate detailed feeder models and loading profiles. This framework already includes multiple DER use cases such as peak shaving for BESS and EV demand modelling and can be easily extended to simulate a number of additional use cases. All of these use cases can be simulated in parallel for multi-year time series simulations using an integrated command line interface. A suit of grid readiness metrics are then evaluated for each simulation to determine required network upgrades and associated costs.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Exploitation of ERTS-1 imagery utilizing snow enhancement techniques

Photogeological analysis of ERTS-simulation and ERTS-1 imagery of snowcovered terrain within the ERAP Feather River site and within the New England (ERTS) test area provided new fracture detail which does not appear on available geological maps. Comparative analysis of snowfree ERTS-1 images has demonstrated that MSS Bands 5 and 7 supply the greatest amount of geological fracture detail. Interpretation of the first snow-covered ERTS-1 images in correlation with ground snow depth data indicates that a heavy blanket of snow (more than 9 inches) accentuates major structural features while a light "dusting", (less than 1 inch) accentuates more subtle topographic expressions. An effective mail-based method for acquiring timely ground-truth (snowdepth) information was established and provides a ready correlation of fracture detail with snow depth so as to establish the working limits of the technique. The method is both efficient and inexpensive compared with the cost of similarly scaled direct field observations.

Wobber, F. J.↗

Chapter 8: Life-Cycle Testing and Analysis

Prior to a spacecraft launch, program mission assurance standards dictate that the flight battery power system should comply with mission requirements under the intended operating conditions. Ground life cycle testing (LCT) combined with an analysis on the electrical power system (EPS) battery is an empirical method used to demonstrate compliance to satellite service life requirements. The LCT compliance method adopted by the aerospace industry is based on demonstrating a space battery's life expectancy as a part of battery qualification. Real-time cell and lithium-ion battery (LIB) LCT data are commonly used for model inputs to EPS power and energy balance analyses, in LIB reliability analysis estimates, and to support on-orbit spacecraft mission life extension opportunities. This chapter describes the LCT planning steps, process approach, and analysis techniques commonly used to qualify space LIB power systems.

accelerated aging↗

Digital Twin for Chemical Science (DTCS) v0.01

Directly visualizing the trajectories of chemistry can unravel novel insights into the behavior of catalysts, gas phase reactions, photo-induced dynamics, and building blocks for quantum information processing. The ability of explicitly identifying, tracking, and tagging the exchange of matter, hence the annihilation and creation of new chemical species, can be best realized through a close coupling of theory and experiment. While the synchrotron-based characterization facilities propelled rapidly in its hardware, providing higher brightness, better resolution, and more precision, the software infrastructure is lagging. We developed DTCS (Digital Twin for Chemical Science) v.01, a central platform that faithfully mimics advanced instrumentations in Scientific User Facilities, by solving a variety of technical challenges in data acquisition, analysis, and model-driven interpretation. Rooted in physics and accelerated by AI, we validated this concept by direct comparison with precise experimental X-ray Photoelectron Spectroscopy (XPS) observations using a ubiquitous metal-water interfacial scenario, i.e., Ag/H2O as our main narrative. The DTCS v.01 input mirrors how the bench chemists work, with the output directly linked to the end station computer, thereby providing a user-friendly, knowledge-driven, and accessible user experience with mechanistic insights standardized in a way that are ready to be published, versioned, and transferred flexibly.

Qian, Jin↗

Novel Microgreen Crop Testing for Space

Long-duration missions beyond low-Earth orbit will encounter challenges in maintaining adequate nutrition and crew acceptability in the food system. In situ production of fresh produce can supplement nutrient deficiencies in the prepackaged diet. Currently, there are a relatively small number of crops that can be reliably grown in space for space crop production efforts. An intriguing area of new investigation involves novel types of microgreens that have the potential to be sources of calories, fat, carbohydrates, and protein. These sources of nutrition are not obtainable in significant quantities with current pick and eat crops. Many microgreen cultivars are also sources of nutrients of interest, such as Vitamins B1, C, and K, and elements such as potassium. Microgreens should be selected to address specific nutritional deficits, as identified by NASA’s Human Research Program, with an emphasis on having a diversity of crops to meet nutritional requirements and crew acceptability. To achieve this, the concept of Crop Readiness Level (CRL) has been developed to gauge readiness of crops for spaceflight applications. CRL includes assessing environmental compatibility, food safety considerations, relevant nutritional analysis, and sensory analysis. Recent testing at Kennedy Space Center has focused on advancing the CRL of a variety of novel microgreens. These varieties were grown under 150 µmol m -2 s -1 PPFD from LED lights, 3000 ppm CO 2 , and 23°C to simulate an ISS environment. Crops were harvested and yield was assessed. Then, baseline microbiological and nutritional analysis (Vitamins B1, C, K; mineral analysis; proximate analysis) and sensory evaluation were performed. These baseline data are essential to selecting candidate crops for future missions and assessing crop production hardware and changes in environmental conditions on future crop performance and nutritional quality.

nutrition↗

A Novel Process for Carbon Dioxide Conversion to Fuel

In this project, TDA developed a new mixed metal oxide-based sorbent that converts CO2 (captured from coal fired power plants) to CO, which can then be combined with renewable H2 generated by water electrolysis or H2 from steam methane reforming to produce different liquid fuels. TDA’s absorbent-based CO2 conversion process uses a redox process, which splits the catalytic reforming of methane with CO2 reaction into two stages: CO2 reduction to CO and CH4 reforming into H2 and CO which eliminates the equilibrium limitations. The CO produced in the two-stage reactor system can then be further reacted with renewable H2 to produce methanol, naphtha, diesel, or gasoline. We worked with the Advanced Power & Energy Program (APEP) of University of California, Irvine (UCI) to design and develop the liquid fuel synthesis process that is built around this new material. We demonstrated the techno-economic viability of the new sorbent based redox process to convert CO2 into synthesis gas by demonstrating continuous carbon dioxide reduction in a prototype test system for over 585 hours while converting up to 10 kg CO2/day. With the successful completion of the R&D effort, the technology is now ready for a larger pilot-scale demonstration and the technology readiness has been raised from TRL 3 to TRL 5. In collaboration with UCI, we completed a high-fidelity process design and economic analysis. The required sale price (RSP) for gasoline (Case 1 NG-MTG) is $4.91/gal and naphtha and diesel (Case 2 NG-FT) are $4.23/gal and $6.07/gal, respectively, on a 2011 dollar basis. To put these costs in perspective, the California prices in current dollars (with its strict specifications) for regular grade gasoline from last year to current year have varied from a low of $3.10/gal in January 2021 to a high of $5.76/gal in March 2022, while prices for diesel from last year to current year have varied from a low of $3.40/gal in January 2021 to a high of $6.41/gal in May 2022 according to the U.S. Energy Information Agency data. It should be noted that the gasoline and diesel produced by these designs of Case 1 and Case 2 would be of very high quality and both nitrogen and sulfur free. These RSPs are based on a cost of imported electricity of $64/MWh based on the low-end current wind generated electricity cost (Genevieve 2011). This cost is by far the largest component of the variable costs used in computing the RSPs. A sensitivity analysis of these RSPs to the cost of imported electricity shows that the cost of the imported electricity has a significant effect on the RSPs. The life cycle analysis (LCA) shows that the total cradle-to-gate CO2 emissions for both liquid fuels (diesel and gasoline) were negative, indicating that overall more CO2 is consumed than released during production of the fuel from CO2 feed stack for both cases (-296 kgCO2 per MT gasoline for Case 1 and -705 kgCO2 per MT diesel for Case 2). On a cradle-to-grave comparison, the use of diesel produced using TDA’s process (2,457 kgCO2 per MT diesel) would release 37.6% less CO2 compared to petroleum based diesel (3,937 kgCO2 per MT diesel) while the use of gasoline produced using TDA’s process (2,792 kgCO2 per MT gasoline) would release 29.3% less CO2 compared to petroleum based gasoline (3,946 kgCO2 per MT gasoline). With the successful completion of the R&D effort, the technology is now ready for a bench-scale demonstration and the technology readiness has been raised from TRL 3 (Analytical and experimental critical function and/or characteristic proof of concept) to TRL 5 (Laboratory scale similar system validation in relevant environment).

20 FOSSIL-FUELED POWER PLANTS↗

Lead Coolant Test Facility Systems Design, Thermal Hydraulic Analysis and Cost Estimate

The Idaho National Laboratory prepared a preliminary technical and functional requirements (T&FR), thermal hydraulic design and cost estimate for a lead coolant test facility. The purpose of this small scale facility is to simulate lead coolant fast reactor (LFR) coolant flow in an open lattice geometry core using seven electrical rods and liquid lead or lead-bismuth eutectic coolant. Based on review of current world lead or lead-bismuth test facilities and research needs listed in the Generation IV Roadmap, five broad areas of requirements were identified as listed: (1) Develop and Demonstrate Feasibility of Submerged Heat Exchanger; (2) Develop and Demonstrate Open-lattice Flow in Electrically Heated Core; (3) Develop and Demonstrate Chemistry Control; (4) Demonstrate Safe Operation; and (5) Provision for Future Testing. This paper discusses the preliminary design of systems, thermal hydraulic analysis, and simplified cost estimate. The facility thermal hydraulic design is based on the maximum simulated core power using seven electrical heater rods of 420 kW; average linear heat generation rate of 300 W/cm. The core inlet temperature for liquid lead or Pb/Bi eutectic is 4200 C. The design includes approximately seventy-five data measurements such as pressure, temperature, and flow rates. The preliminary estimated cost of construction of the facility is $3.7M (in 2006 $). It is also estimated that the facility will require two years to be constructed and ready for operation.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗