Diode step stress program for JANTX1N5554
Data were compiled for the purpose of evaluating the effect of power/temperature step stress when applied to a variety of semiconductor devices. The switching diode JANTX1N5554 is examined.
Source record↗
SEARCH · Search NASA
Results for “data compilation”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Seasat low-rate data system
The Seasat low-rate data system, an end-to-end data-processing and data-distribution system for the four low-rate sensors (radar altimeter, Seasat-A scatterometer system, scanning multichannel microwave radiometer, and visible and infrared radiometer) carried aboard the satellite, is discussed. The function of the distributed, nonreal-time, magnetic-tape system is to apply necessary calibrations, corrections, and conversions to yield geophysically meaningful products from raw telemetry data. The algorithms developed for processing data from the different sensors are described, together with the data catalogs compiled.
Brown, J. W.↗
Venus - Preliminary topographic and surface imaging results from the Pioneer Orbiter
Three large Venus surface features, identified previously in images obtained from earth-based radar observations, are shown by the Pioneer Venus radar mapper to be elevated 5 to 10 km above the surrounding terrain. Two of these features, one bright and the other dark, lie adjacent to each other astride the 65 N parallel between longitudes 310 E and 10 E. The combined region forms a huge tectonically uplifted plateau, surmounted by radar-bright ridges that may have either a volcanic or tectonic origin. The third feature, located at 30 N, 283 E, is radar-bright and may consist of volcanic material extruded along a fault zone. A first radar-scattering image, compiled from data obtained by the mapper in its imaging mode, shows a region north of the equator; several circular depressions seen in this area may result from meteoritic impact.
Pettengill, G. H.↗
Carbon/graphite fiber risk analysis and assessment study: An assessment of the risk to Douglas commercial transport aircraft
The potential hazard to electrical and electronic devices should there be a release of free carbon fibers due to an aircraft crash and fire was assessed. Exposure and equipment sensitivity data were compiled for a risk analysis. Results are presented in the following areas: DC-9/DC-10 electrical/electronic component characterization; DC-9 and DC-10 fiber transfer functions; potential for transport aircraft equipment exposure to carbon fibers; and equipment vulnerability assessment. Results reflect only a negligible increase in risk for the DC-9 and DC-10 fleets either now or projected to 1993.
Schjelderup, H. C.↗
Illustration of year-to-year variation in wheat spectral profile crop growth curves
Data previously compiled on the year to year variability of spectral profile crop growth parameters for spring and winter wheat in Kansas, Oklahoma, and the Dakotas were used with a profile model to develop graphs illustrating spectral profile crop growth curves for a number of years and a number of spring and winter wheat segments. These curves show the apparent variability in spectral profiles for wheat from one year to another within the same segment and from one segment to another within the same year.
Gonzalez, P.↗
Aerodynamic characteristics of a series of airbreathing missile configurations
The results of an experimental program conducted in order to compile a data base useful in the application of airbreathing propulsion to missiles are presented. The configurations investigated used two-dimensional or axisymmetric twin inlets located at three alternative circumferential positions: 90, 115 and 135 deg to the vertical centerline. The effects of a wing located above the inlets and of various tail configurations were investigated, with a view to longitudinal stability/control and lateral-directional stability characteristics. It is noted that of the three tail configurations tested, the 'X' tail showed (1) the most linear pitch-moment curve, (2) control effectiveness, and (3) positive lateral-directional stability.
Hayes, C.↗
The technical report as an effective medium for information transmittal
The NASA technical report is evaluated to determine its effectiveness as a medium for information transmittal. Empirical data was compiled through a survey of report producers and through an assessment of report components, format, and organization found in current style manuals. It was found that little documented research exists to support or suggest criteria for assessing the effectiveness of a technical report. The survey showed that wide variances in the technical report exist: ninety-nine report producers generated ninety-eight different structural components, only five of which were used by 50% or more of the respondents. Moreover, 33% of the respondents claimed to use no style manual at all. Future research is planned to assess the adequacy of a reduced set of report components, clearly defining the purpose and evaluating the criteria for each component.
Stohrer, F. F.↗
Controlled Speed Accessory Drive demonstration program
A Controlled Speed Accessory Drive System was examined in an effort to improve the fuel economy of passenger cars. Concept feasibility and the performance of a typical system during actual road driving conditions were demonstrated. The CSAD system is described as a mechanical device which limits engine accessory speeds, thereby reducing parasitic horsepower losses and improving overall vehicle fuel economy. Fuel consumption data were compiled for fleets of GSA vehicles. Various motor pool locations were selected, each representing different climatic conditions. On the basis of a total accumulated fleet usage of nearly three million miles, an overall fuel economy improvement of 6 percent to 7 percent was demonstrated. Coincident chassis dynamometer tests were accomplished on selected vehicles to establish the effect of different accessory drive systems on exhaust emissions, and to evaluate the magnitude of the mileage benefits which could be derived.
Hoehn, F. W.↗
The horizontal and vertical semi-diameters of the Sun observed at the Cape of Good Hope (1834 - 1887) and Paris (1837 - 1906): A report on work in progress
Cape and Paris meridian observations of the solar limbs which permit an estimate to be made of the solar semi-diameter were surveyed, sampled, and compared with Greenwich and U.S. Naval Observatory observations. Significant systematic errors were found in the Paris work and have been correlated with changes of instruments and observers. Results from the Cape series indicate that work should continue on the compilation of data from Cape observations of the Sun.
Smith, C.↗
Arizona geophysical data base
A series of digital data sets were compiled for input into a geophysical data base for a one degree quadrangle in Arizona. Using a Landsat digital mosaic as a base, information on topography, geology, gravity as well as Seasat radar imagery were registered. Example overlays and tabulations are performed.
Mcleod, R. G.↗
Space shuttle flying qualities criteria assessment, phase 3
The crucial flight data measurement and reduction techniques required for the experimental approach are explored. An overview of available flight data is presented, identification of the effective augmented vehicle and pilot models determined, a summary of flight data problems compiled, and further recommendations for the Orbiter Flying Qualities (OFQ) experiment provided.
Myers, T. T.↗
Voyager 1 and 2 Atlas of Six Saturnian Satellites
Maps, compiled with data gathered primarily by Voyager 1 and 2 spacecraft, are presented which show the diversity among six of the Saturnian moons. Mimas and Enceladus are mapped in detail. Prelimary maps are given for the other four satellites. Diameter, density, albedo, and distance from mother planet, among much more data, is given for each moon.
Batson, R. M.↗
Reflectance of metallic indium for solar energy applications
An investigation has been conducted in order to compile quantitative data on the reflective properties of metallic indium. The fabricated samples were of sufficiently high quality that differences from similar second-surface silvered mirrors were not apparent to the human eye. Three second-surface mirror samples were prepared by means of vacuum deposition techniques, yielding indium thicknesses of approximately 1000 A. Both hemispherical and specular measurements were made. It is concluded that metallic indium possesses a sufficiently high specular reflectance to be potentially useful in many solar energy applications.
Bouquet, F. L.↗
Advanced manufacturing development of a composite empennage component for L-1011 aircraft
This is the final report of technical work conducted during the fourth phase of a multiphase program having the objective of the design, development and flight evaluation of an advanced composite empennage component manufactured in a production environment at a cost competitive with those of its metal counterpart, and at a weight savings of at least 20 percent. The empennage component selected for this program is the vertical fin box of the L-1011 aircraft. The box structure extends from the fuselage production joint to the tip rib and includes front and rear spars. During Phase 4 of the program, production quality tooling was designed and manufactured to produce three sets of covers, ribs, spars, miscellaneous parts, and subassemblies to assemble three complete ACVF units. Recurring and nonrecurring cost data were compiled and documented in the updated producibility/design to cost plan. Nondestruct inspections, quality control tests, and quality acceptance tests were performed in accordance with the quality assurance plan and the structural integrity control plan. Records were maintained to provide traceability of material and parts throughout the manufacturing development phase. It was also determined that additional tooling would not be required to support the current and projected L-1011 production rate.
Alva, T.↗
Analysis of terrestrial conditions and dynamics
Land spectral reflectance properties for selected locations, including the Goddard Space Flight Center, the Wallops Flight Facility, a MLA test site in Cambridge, Maryland, and an acid test site in Burlington, Vermont, were measured. Methods to simulate the bidirectional reflectance properties of vegetated landscapes and a data base for spatial resolution were developed. North American vegetation patterns observed with the Advanced Very High Resolution Radiometer were assessed. Data and methods needed to model large-scale vegetation activity with remotely sensed observations and climate data were compiled.
Goward, S. N.↗
The initial mass function and global rates of mass, momentum, and energy input to the interstellar medium via stellar winds
Published observational data are compiled and analyzed, using theoretical stellar-evolution models to determine the global rates of mass, momentum, and energy injected into the interstellar medium (ISM) by stellar winds. Expressions derived include psi = 0.00054 x (M to the -1.03) stars formed/sq kpc yr log M (where M is the initial mass function in solar mass units) and mass-loss = (2 x 10 to the -13th) x (L to the 1.25) solar mass/yr (with L in solar luminosity units). It is found that the wind/supernova injection of energy into the ISM and the mass loss from stars of 5 solar mass or more are approximately balanced by the dissipation of energy by cloud-cloud collisions and the formation of stars, respectively.
Van Buren, D.↗
Particle acceleration
Data is compiled from Solar Maximum Mission and Hinothori satellites, particle detectors in several satellites, ground based instruments, and balloon flights in order to answer fundamental questions relating to: (1) the requirements for the coronal magnetic field structure in the vicinity of the energization source; (2) the height (above the photosphere) of the energization source; (3) the time of energization; (4) transistion between coronal heating and flares; (5) evidence for purely thermal, purely nonthermal and hybrid type flares; (6) the time characteristics of the energization source; (7) whether every flare accelerates protons; (8) the location of the interaction site of the ions and relativistic electrons; (9) the energy spectra for ions and relativistic electrons; (10) the relationship between particles at the Sun and interplanetary space; (11) evidence for more than one acceleration mechanism; (12) whether there is single mechanism that will accelerate particles to all energies and also heat the plasma; and (13) how fast the existing mechanisms accelerate electrons up to several MeV and ions to 1 GeV.
Vlahos, L.↗
Atmospheres and ionospheres of the outer planets and their satellites
Essential aspects of physical and chemical processes in the atmospheres and ionospheres of the outer planets are examined in an introductory overview of current knowledge, intended both for graduate students of planetary science and for practicing scientists. Chapters are devoted to bulk atmospheric compositions, thermal structures, cloud structures, vertical mixing, photochemistry, the ionospheres, and the satellites. Measurement data are compiled in tables, and extensive graphs and diagrams are provided.
Atreya, Sushil K.↗